| Age | Commit message (Collapse) | Author |
|---|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The current unbinding process for Madera has some issues. The trouble
is runtime PM is disabled as the first step of the process, but
some of the drivers release IRQs causing regmap IRQ to issue a
runtime get which fails. To allow runtime PM to remain enabled during
mfd_remove_devices, the DCVDD regulator must remain available. In
the case of external DCVDD's this is simple, the regulator can simply
be disabled/put after the call to mfd_remove_devices. However, in
the case of an internally supplied DCVDD the regulator needs to be
released after the other MFD children depending on it.
Use the new MFD mfd_remove_devices_late functionality to split
the DCVDD regulator off from the other drivers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The mfd_cell structures inconsistently use commas on single entries in
the table, make this consistent by always using a comma. Also remove an
extra blank line.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Both manual and power on resets have a brief period where the chip will
not be accessible immediately afterwards. Extend the time allowed for
this from a minimum of 1mS to 2mS based on newer evaluation of the
hardware and ensure this reset happens in all reset conditions. Whilst
making the change also remove the redundant NULL checks in the reset
functions as the GPIO functions already check for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
It is advised to wait for the boot done bit to be set before reading
any other register, update the driver to respect this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add the ability to get the clock for each clock input pin of the chip
and enable MCLK2 since that is expected to be a permanently enabled
32kHz clock.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
GPL-2.0-only is the preferred way of expressing v2 of the GPL, so switch
to that. Remove some redundant copyright notices and correct some
instances where the wrong comment type has been used in header files.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch adds all the core support and defines for the Cirrus
Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs.
Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch adds all the core support and defines for the Cirrus
Logic CS47L15 smart audio CODEC.
Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Currently we are relying on the exact match of the regulator name to
find MICVDD, we should add an explicit supply mapping to allow this to
be found more reliably.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
regmap_read won't set val to anything if an ACKed bus fails.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT
OF mathing mechanism and register it.
Before this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
After this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
alias: of:N*T*Ccirrus,wm1840C*
alias: of:N*T*Ccirrus,wm1840
alias: of:N*T*Ccirrus,cs47l91C*
alias: of:N*T*Ccirrus,cs47l91
alias: of:N*T*Ccirrus,cs47l90C*
alias: of:N*T*Ccirrus,cs47l90
alias: of:N*T*Ccirrus,cs47l85C*
alias: of:N*T*Ccirrus,cs47l85
alias: of:N*T*Ccirrus,cs47l35C*
alias: of:N*T*Ccirrus,cs47l35
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Coccinelle warning of a spurious semicolon on the closing brace
of a while loop.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add variables to struct madera that will be shared by the
extcon and audio codec drivers to synchronize output state
during accessory detection. Also add a mutex to protect
the DAPM pointer.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
While polling for BOOT_DONE the chip could NAK a read because it is
still booting, which would terminate the regmap_read_poll_timeout()
with an error.
Instead implement a polling loop that ignores read errors so we
always poll until the chip signals boot or the loop times out.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This adds the generic core support for Cirrus Logic "Madera" class codecs.
These are complex audio codec SoCs with a variety of digital and analogue
I/O, onboard audio processing and DSPs, and other features.
These codecs are all based off a common set of hardware IP so can be
supported by a core of common code (with a few minor device-to-device
variations).
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
