summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2007-10-10V4L/DVB (6279): en_50221: convert to kthread APIChristoph Hellwig
Here's an attempted update to the full kthread API + wake_up_process: Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6278): Buf: fix typo that caused data loss when readng streams from ↵Maxim Levitsky
device If videobuf_read_stream reads two or more buffers it was overwriting the first one Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6277): vivi cleanup: remove the unused varsMauro Carvalho Chehab
Vivi driver is now simpler. This patch removes the now unused vars. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6276): V4L: videobuf-core.c lock before streaming checkBrandon Philips
The reading/streaming fields are used for mutual exclusion of the queue and should be protected by the queue lock. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6275): V4L: vivi.c remove the "resource" lockingBrandon Philips
The "resource" locking in vivi isn't needed since streamon/streamoff/read_stream do mutual exclusion using q->reading/q->streaming. Plus it is sort of broken: a) res_locked() use in vivi_read() is racey. b) res_free() calls mutex_lock twice causing streamoff to break Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6274): V4L: vivi.c replace logic in vivi_poll with videobuf_poll_streamBrandon Philips
Since vivi is using videobuf_read_stream() it can use videobuf_poll_stream() now. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6273): V4L: vivi.c vidioc_try_fmt_cap() negotiate a valid fieldBrandon Philips
If the client provides V4L2_FIELD_ANY vivi should return a valid field :) Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6272): V4L: properly fix support for capturing interlaced video in ↵Maxim Levitsky
saa7134 By "capturing interlaced video" I mean that card ensures that top field is really top and vice versa (I think it takes the filed ID from signal) Properly turn on/off that support depending on signal state Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6271): V4L: Add basic support for suspend/resume for saa7134Maxim Levitsky
This adds support for suspend/resume for core of saa7134 Should fix bug#7220 Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6270): V4L: Honor dev->ctl_invert when setting up the decoder in ↵Maxim Levitsky
saa7134 When user sets dev->ctl_invert, driver writes negative values to SAA7134_DEC_LUMA_CONTRAST and SAA7134_DEC_CHROMA_SATURATION, but general code that initializes decorder ignores that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6269): V4L: Fix a "scheduling while atomic" bug in saa7134Maxim Levitsky
set_tvnorm can sleep in saa7134_i2c_xfer (it will be called through tuner code) but code calls it under spinlock. Fix that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6268): V4L: Fix a lock inversion in generic videobuf codeMaxim Levitsky
videobuf_qbuf takes q->lock, and then calls q->ops->buf_prepare which by design in all drivers calls videobuf_iolock which calls videobuf_dma_init_user and this takes current->mm->mmap_sem on the other hand if user calls mumap from other thread, sys_munmap takes current->mm->mmap_sem and videobuf_vm_close takes q->lock Since this can occur only for V4L2_MEMORY_MMAP buffers, take current->mm->mmap_sem in qbuf, before q->lock, and don't take current->mm->mmap_sem videobuf_dma_init_user for those buffers Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6266): videobuf cleanup: mmap check is common to all videobuf. Make ↵Mauro Carvalho Chehab
it at core Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6265): Prevent for calling mmap_free without an allocated bufferMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-10V4L/DVB (6264): Make the vertical lines to moveMauro Carvalho Chehab
While this is not the standard color bar behaviour, having some movement there allows to check if buffers are being properly handled. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6263): Fix buffer release codeMauro Carvalho Chehab
Release code should happen before the cleaning of map variable. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6262): An allocation error message were being printed as a debug msgMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6261): Cleans mem->vmalloc after vfreeMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6260): Fix Kconfig dependencyMauro Carvalho Chehab
Thanks to Michael Krufky for pointing this to me. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6259): Fix vivi poll() methodMauro Carvalho Chehab
Due to the replace of videobuf_read_one to videobuf_read_stream, poll() method implementation is wrong. This fixes poll() implementation, making read of /dev/video? to work again. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with ↵Mauro Carvalho Chehab
the other patches Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6256): Remove the obsolete video-buf moduleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6255): Convert vivi to use videobuf-vmallocMauro Carvalho Chehab
This patch removes the usage of videobuf-dma-sg from vivi driver, using instead videobuf-vmalloc. This way, vivi will be useful for testing the newer method. Reverting this patch won't hurt vivi, since both methods work fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6254): Add videobuf-vmallocMauro Carvalho Chehab
Adds a newer videobuf-vmalloc module. This module uses the same videobuf controls, but implements memory allocation based on vmalloc methods. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6253): Convert vivi to use the newer videobuf-dma-sg moduleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6252): Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6251): Replace video-buf to a more generic approachMauro Carvalho Chehab
video-buf currently does two different tasks: - Manages video buffers with a common code that allows implementing all the V4L2 different modes of buffering; - Controls memory allocations While the first task is generic, the second were written to support PCI DMA Scatter/Gather needs. The original approach can't even work for those video capture hardware that don't support scatter/gather. I did one approach to make it more generic. While the approach worked fine for vivi driver, it were not generic enough to handle USB needs. This patch creates two different modules, one containing the generic video buffer handling (videobuf-core) and another with PCI DMA S/G. After this patch, it would be simpler to write an USB video-buf and a non-SG DMA module. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6250): bw-qcam use data_reverse instead of manually poking the ↵Brett Warden
control register fix coding-style repairs Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.cSascha Sommer
Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6247): Fix bug #8689: Fixes IR stop/start during suspend/resumeMauro Carvalho Chehab
IR workqueue should be disabled during suspend. This avoids some troubles, like the one reported on bug #8689: "The Hauppauge HVR 1100 ir-remote control does not work after resume from suspend to ram or disk." This patch disables IR before suspending, re-enabling it after resume. Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with the fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: Peter Poklop <Peter.Poklop@gmx.at>
2007-10-09V4L/DVB (6246): GemTek Radio card - Control WordTrent Piepho
Redoes the way the control word is stored and set. The existing code was a lot more complicated than it needed to be. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: Pekka Seppänen <pexu@kapsi.fi>
2007-10-09V4L/DVB (6245): GemTek Radio card - frequency calculationTrent Piepho
Frequency calculation to use better math. It's still the same IF offset and step size (which are not the same as the datasheet says) as the code was before. It's just more efficient and accurate. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Pekka Seppänen <pexu@kapsi.fi> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6244): [PATCH 1/2] GemTek Radio cardPekka Seppanen
Code cleanup for GemTek Radio card driver. Removed unnecessary / invalid I/O commands and rewrote code for tuning on-board BU2614FS chip. Adds several new module params for power users. Includes automatic device probing. Signed-off-by: Pekka Seppanen <pexu@kapsi.fi> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Reviewed-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6243): [PATCH 2/2] GemTek Radio cardPekka Seppanen
Details now match with radio-gemtek.c, eg. no more different ports. Included a short note about cards that should be compatible with radio-gemtek module. Signed-off-by: Pekka Seppanen <pexu@kapsi.fi> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Reviewed-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6241): fix typo in DVB_PLL Kconfig help textMichael Krufky
s/driver/drives/1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6238): bw-qcam: use data_reverse instead of manually poking the ↵Brett Warden
control register Fixes use of parport_write_control() to match the newer interface that requires explicit parport_data_reverse() and parport_data_forward() calls. This eliminates the following error message and restores the original intended behavior: parport0 (bw-qcam): use data_reverse for this! Also increases threshold in qc_detect() from 300 to 400, as my camera often results in a count of approx 330. Added a kernel error message to indicate detection failure. Thanks Ray and Randy for your comments, and for pointing out that I needed to reset the port to forward mode! Signed-off-by: Brett T. Warden <brett.warden@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6237): Oops in pwc v4l driverOliver Neukum
The pwc driver is defficient in locking, which can trigger an oops when disconnecting. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: Luc Saillard <luc@saillard.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6235): cafe_ccic: default to allocating DMA buffers at probe timeAndres Salomon
By default, we allocate DMA buffers when actually reading from the video capture device. On a system with 128MB or 256MB of ram, it's very easy for that memory to quickly become fragmented. We've had users report having 30+MB of memory free, but the cafe_ccic driver is still unable to allocate DMA buffers. Our workaround has been to make use of the 'alloc_bufs_at_load' parameter to allocate DMA buffers during device probing. This patch makes DMA buffer allocation happen during device probe by default, and changes the parameter to 'alloc_bufs_at_read'. The camera hardware is there, if the cafe_ccic driver is enabled/loaded it should do its best to ensure that the camera is actually usable; delaying DMA buffer allocation saves an insignicant amount of memory, and causes the driver to be much less useful. Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6232): dvb-pll: report whether input rf will be autoselected or set ↵Michael Krufky
via insmod option Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6231): dvb-pll: always show pll name if forced via insmod optionMichael Krufky
The name of the pll will be shown if forced via insmod option, or if debug is enabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6230): dvb-pll: add module option to force dvb-pll desc id (for ↵Michael Krufky
debug use only) Add a module option to force the dvb-pll module to use an alternate dvb-pll description without having to recompile the kernel. Having a module option like this is useful in some cases, where the vendor may release an alternate revision of the hardware using a different tuner, but without changing the pci subsystem / usb device ids. This option is intended for debugging purposes _only_. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6229): dvb-pll: increase DVB_PLL_MAX to 64Michael Krufky
Increased DVB_PLL_MAX from 16 to a figure that would never be reached in a practical sense. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6228): dvb-pll: add module option to specify rf inputMichael Krufky
Add a module option to dvb-pll, called "input" to specify which rf input to use on devices with multiple rf inputs. If the module option is not specified, then the driver will autoselect the rf input, as per previous behavior. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6227): dvb-pll: store instance ID in dvb_pll_priv structureMichael Krufky
Store an instance ID in the dvb_pll_priv structure, so that module options specific to a given pll may be used by the functions within the driver. When debug is turned on, print a message indicating which pll was attached and it's instance id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6226): dvb-pll: pass fe pointer into dvb_pll_configure() and set() ↵Michael Krufky
functions The pll-specific set() function will need access to the dvb_pll_priv structure for new functionality. This patch gives access to this structure to the required functions. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6225): AverTV Studio 307 has only one composite inputStas Sergeev
AverTV Studio 307 has only one composite input. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6224): VIDEO_CX23885 depends on DVB_COREMichael Krufky
Fix the following dependency issue: ERROR: "dvb_dmx_init" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_unregister_adapter" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_register_frontend" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_unregister_frontend" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_net_release" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_frontend_detach" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmxdev_release" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmx_swfilter" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_net_init" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmx_release" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_register_adapter" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "dvb_dmxdev_init" [drivers/media/video/video-buf-dvb.ko] undefined! ERROR: "mt2131_attach" [drivers/media/video/cx23885/cx23885.ko] undefined! ERROR: "s5h1409_attach" [drivers/media/video/cx23885/cx23885.ko] undefined! Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6222): select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 ExpressMichael Krufky
VIDEO_CX23885 must select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6221): budget-ci: select TT keymap for DVB-S TT 1500Oliver Endriss
DVB-S TT 1500 must use the TT keymap. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6220): TCM825x: Add support for vidioc_int_g_ifparm call, small ↵Sakari Ailus
cleanups vidioc_int_g_ifparm returns platform-specific information about the interface settings used by the sensor. Support for [gs]_ext_clk has been removed. Fix indentation and remove useless & characters. Remove experiment for typechecking slave callback function arguments. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 15:53:34 +0000