summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2018-07-27media: adv7180: fix field type to V4L2_FIELD_ALTERNATENiklas Söderlund
The ADV7180 and ADV7182 transmit whole fields, bottom field followed by top (or vice-versa, depending on detected video standard). So for chips that do not have support for explicitly setting the field mode via I2P, set the field mode to V4L2_FIELD_ALTERNATE. I2P converts fields into frames using an edge adaptive algorithm. The frame rate is the same as the 'field rate': e.g. X fields per second are now X frames per second. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: rockchip/rga: Fix bad dma_free_attrs() parameterEzequiel Garcia
In rga_remove(), dma_free_attrs is being passed the wrong cpu address, which triggers an exception if the driver is removed. Fix it. Tested on a RK3399 platform, with a bind/unbind cycle. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: media.h: remove linux/version.h includeHans Verkuil
The media.h public header is one of only three public headers that include linux/version.h. Drop it from media.h. It was only used for an obsolete define. It has to be added to media-device.c, since that source relied on media.h to include it. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: vivid: Fix V4L2_FIELD_ALTERNATE new frame checkNicolas Dufresne
The vivid driver will overlay stream time on generated frames. Though, in interlacing mode V4L2_FIELD_ALTERNATE, each field is separate and must have the same time to ensure proper render. Though, this time was only updated every 2 frames as the code was checking against the wrong counter (frame counter rather then field counter). Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: coda: add SPS fixup code for frame sizes that are not multiples of 16Philipp Zabel
The CODA7541 firmware does not set the SPS frame cropping fields to properly describe coded h.264 streams with frame sizes that are not a multiple of the macroblock size. This adds RBSP parsing code and a SPS fixup routine to manually replace the cropping information in the headers produced by the firmware with the correct values. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [hans.verkuil@cisco.com: added explanation of SPS RBSP to comment] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: coda: let CODA960 firmware set frame cropping in SPS headerPhilipp Zabel
When encoding h.264, if visible resolution is not aligned to macroblock size, frame cropping has to be set in the SPS header to produce correct streams. The CODA960 firmware can do this on its own if asked to. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: helene: fix xtal frequency setting at power onKatsuhiro Suzuki
This patch fixes crystal frequency setting when power on this device. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: vsp1: Document vsp1_dl_body refcntKieran Bingham
In commit 2d9445db0ee9 ("media: vsp1: Use reference counting for bodies"), a new field was introduced to the vsp1_dl_body structure to account for usage tracking of the body. Document the newly added field in the kerneldoc. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: uvcvideo: Send a control event when a Control Change interrupt arrivesGuennadi Liakhovetski
UVC defines a method of handling asynchronous controls, which sends a USB packet over the interrupt pipe. This patch implements support for such packets by sending a control event to the user. Since this can involve USB traffic and, therefore, scheduling, this has to be done in a work queue. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: uvcvideo: Handle control pipe protocol STALLsGuennadi Liakhovetski
When a command ends up in a STALL on the control pipe, use the Request Error Code control to provide a more precise error information to the user. For example, if a camera is still busy processing a control, when the same or an interrelated control set request arrives, the camera can react with a STALL and then return the "Not ready" status in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this patch the user would then get an EBUSY error code instead of a generic EPIPE. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: uvcvideo: Remove a redundant checkGuennadi Liakhovetski
Event subscribers cannot have a NULL file handle. They are only added at a single location in the code, and the .fh pointer is used without checking there. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: uvcvideo: Also validate buffers in BULK modeNicolas Dufresne
Just like for ISOC, validate the decoded BULK buffer size when possible. This avoids sending corrupted or partial buffers to userspace, which may lead to application crash or run-time failure. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> [laurent.pinchart@ideasonboard.com: Move uvc_video_validate_buffer() call to uvc_video_next_buffers()] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: uvcvideo: Add KSMedia 8-bit IR format supportLaurent Pinchart
Add support for the 8-bit IR format GUID defined in the Microsoft Kernel Streaming Media API. Reported-by: Paul Menzel <pmenzel+linux-media@molgen.mpg.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Menzel <pmenzel+linux-media@molgen.mpg.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: uvcvideo: Fix minor spellingKieran Bingham
Provide the missing 't' from straightforward. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: em28xx-cards: disable V4L2 mode for dual tunersMauro Carvalho Chehab
Right now, the code that calculates alternate modes is not ready for devices with dual tuners. That's ok, as we currently don't have any such devices, but better to add a warning for such case, as, if anyone adds such device, the logic will need to be reviewed. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Brad Love <brad@nextdimension.cc> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: em28xx: Remove duplicate PIDBrad Love
Half-revert: commit 5b1a270d224b ("media: dvb: add alternative USB PID for Hauppauge WinTV-soloHD")' The PID already exists on the line above. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: em28xx: Fix DualHD disconnect oopsBrad Love
During the duplication of em28xx state for the second tuner pair a pointer to alt_max_pkt_size_isoc is copied. During tear down the second tuner is destroyed first and kfrees alt_max_pkt_size_isoc, then the first tuner is destroyed and kfrees it again. The property should only be kfree'd if the tuner is PRIMARY_TS. [ 354.888560] ------------[ cut here ]------------ [ 354.888562] kernel BUG at mm/slub.c:296! [ 354.888574] invalid opcode: 0000 [#1] SMP NOPTI [ 354.888869] CPU: 1 PID: 19 Comm: kworker/1:0 Not tainted 4.18.0-rc1+ #20 [ 354.889140] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018 [ 354.889408] Workqueue: usb_hub_wq hub_event [ 354.889679] RIP: 0010:__slab_free+0x217/0x370 [ 354.889942] Code: bb c0 e8 07 41 38 c7 72 39 48 83 c4 70 5b 41 5a 41 5c 41 5d 41 5e 41 5f 5d 49 8d 62 f8 c3 f3 90 49 8b 04 24 a8 01 75 f6 eb 82 <0f> 0b 44 89 45 80 48 89 4d 88 e8 aa fa ff ff 85 c0 74 cc e9 b7 fe [ 354.890598] RSP: 0018:ffffb84c41a4fad0 EFLAGS: 00010246 [ 354.890934] RAX: ffff948646e85150 RBX: ffff948646e85150 RCX: ffff948646e85150 [ 354.891280] RDX: 00000000820001d9 RSI: fffffa8fd01ba140 RDI: ffff94865e807c00 [ 354.891649] RBP: ffffb84c41a4fb70 R08: 0000000000000001 R09: ffffffffc059ce21 [ 354.892025] R10: ffff948646e85150 R11: 0000000000000001 R12: fffffa8fd01ba140 [ 354.892403] R13: ffff948646e85150 R14: ffff94865e807c00 R15: ffff94864c92e0a0 [ 354.892780] FS: 0000000000000000(0000) GS:ffff94865ec40000(0000) knlGS:0000000000000000 [ 354.893150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 354.893530] CR2: 00007f4e476da950 CR3: 000000040112c000 CR4: 00000000003406e0 [ 354.893917] Call Trace: [ 354.894315] ? __dev_printk+0x3c/0x80 [ 354.894695] ? _dev_info+0x64/0x80 [ 354.895082] ? em28xx_free_device+0x41/0x50 [em28xx] [ 354.895464] kfree+0x17a/0x190 [ 354.895852] ? kfree+0x17a/0x190 [ 354.896310] em28xx_free_device+0x41/0x50 [em28xx] [ 354.896698] em28xx_usb_disconnect+0xfa/0x110 [em28xx] [ 354.897083] usb_unbind_interface+0x7a/0x270 [ 354.897475] device_release_driver_internal+0x17c/0x250 [ 354.897864] device_release_driver+0x12/0x20 [ 354.898252] bus_remove_device+0xec/0x160 [ 354.898639] device_del+0x13d/0x320 [ 354.899018] ? usb_remove_ep_devs+0x1f/0x30 [ 354.899392] usb_disable_device+0x9e/0x270 [ 354.899772] usb_disconnect+0x92/0x2a0 [ 354.900149] hub_event+0x98e/0x1650 [ 354.900519] ? sched_clock_cpu+0x11/0xa0 [ 354.900890] process_one_work+0x167/0x3f0 [ 354.901251] worker_thread+0x4d/0x460 [ 354.901610] kthread+0x105/0x140 [ 354.901964] ? rescuer_thread+0x360/0x360 [ 354.902318] ? kthread_associate_blkcg+0xa0/0xa0 [ 354.902672] ret_from_fork+0x22/0x40 [ 354.903024] Modules linked in: rc_hauppauge em28xx_rc rc_core si2157 lgdt3306a i2c_mux em28xx_dvb dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_common snd_hda_codec_hdmi nls_iso8859_1 edac_mce_amd kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi aesni_intel snd_seq_midi_event aes_x86_64 snd_rawmidi crypto_simd em28xx cryptd glue_helper asix tveeprom usbnet snd_seq v4l2_common mii videodev snd_seq_device media input_leds snd_timer joydev ccp k10temp wmi_bmof snd soundcore mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables vfio_pci vfio_virqfd irqbypass vfio_iommu_type1 vfio nouveau mxm_wmi video i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops i2c_piix4 drm ahci libahci [ 354.905129] wmi gpio_amdpt gpio_generic hid_generic usbhid hid [ 354.908140] ---[ end trace c230d02716298c34 ]--- [ 354.908145] RIP: 0010:__slab_free+0x217/0x370 [ 354.908147] Code: bb c0 e8 07 41 38 c7 72 39 48 83 c4 70 5b 41 5a 41 5c 41 5d 41 5e 41 5f 5d 49 8d 62 f8 c3 f3 90 49 8b 04 24 a8 01 75 f6 eb 82 <0f> 0b 44 89 45 80 48 89 4d 88 e8 aa fa ff ff 85 c0 74 cc e9 b7 fe [ 354.908183] RSP: 0018:ffffb84c41a4fad0 EFLAGS: 00010246 [ 354.908186] RAX: ffff948646e85150 RBX: ffff948646e85150 RCX: ffff948646e85150 [ 354.908189] RDX: 00000000820001d9 RSI: fffffa8fd01ba140 RDI: ffff94865e807c00 [ 354.908191] RBP: ffffb84c41a4fb70 R08: 0000000000000001 R09: ffffffffc059ce21 [ 354.908193] R10: ffff948646e85150 R11: 0000000000000001 R12: fffffa8fd01ba140 [ 354.908195] R13: ffff948646e85150 R14: ffff94865e807c00 R15: ffff94864c92e0a0 [ 354.908198] FS: 0000000000000000(0000) GS:ffff94865ec40000(0000) knlGS:0000000000000000 [ 354.908201] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 354.908203] CR2: 00007f4e476da950 CR3: 000000016b20a000 CR4: 00000000003406e0 Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: em28xx: Fix dual transport stream operationBrad Love
Addresses the following, which introduced a regression itself: Commit 509f89652f83 ("media: em28xx: fix a regression with HVR-950") The regression fix breaks dual transport stream support. Currently, when a tuner starts streaming it sets alt mode on the USB interface. The problem is, in a dual tuner model, both tuners share the same USB interface, so when the second tuner becomes active and sets alt mode on the interface it kills streaming on the other port. This patch addresses the regression by only setting alt mode on the USB interface during em28xx_start_streaming, if the device is not a dual tuner model. This allows all older and single tuner devices to explicitly set alt mode during stream startup. Testers report both isoc and bulk DualHD models work correctly with the alt mode set only once, in em28xx_dvb_init. Fixes: 509f89652f83 ("media: em28xx: fix a regression with HVR-950") Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: vicodec: current -> curHans Verkuil
'current' is also defined in asm-generic/current.h. When compiling this driver for older kernels with the media_build system, this header is included via compat.h and it no longer compiles. Rename current to cur. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: dib0700: add code commentGustavo A. R. Silva
Add FIXME code comment: /* FIXME: check if it is fe_adap[1] */ It is likely that it should be adap->fe_adap[1].fe in the second clause, but this has never been verified. Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: dvb-bt8xx: remove duplicate codeGustavo A. R. Silva
The same code is executed regardless of whether c->frequency < 600000000 or c->frequency < 730000000 is true. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: cx231xx: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: si4713: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: em28xx: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: hdpvr: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: dvb-usb: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: tm6000: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: netup_unidvb: don't check number of messages in the driverWolfram Sang
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: gl861: fix probe of dvb_usb_gl861Mika Båtsman
Probe of dvb_usb_gl861 was working at least with v4.4. Noticed the issue with v4.13 but according to similar issues the problem started with v4.9. [ 15.288065] transfer buffer not dma capable [ 15.288090] WARNING: CPU: 2 PID: 493 at drivers/usb/core/hcd.c:1595 usb_hcd_map_urb_for_dma+0x4e2/0x640 ...CUT... [ 15.288791] dvb_usb_gl861: probe of 3-7:1.0 failed with error -5 Tested with MSI Mega Sky 580 DVB-T Tuner [GL861] [mchehab+samsung@kernel.org: rebased on the top of upstream] Cc: stable@vger.kernel.org Signed-off-by: Mika Båtsman <mika.batsman@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: add HEVC codec supportStanimir Varbanov
This add HEVC codec support for venus versions 3xx and 4xx. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: core: add sdm845 DT compatible and resource dataStanimir Varbanov
This adds sdm845 DT compatible string with it's resource data table. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: implementing multi-stream supportStanimir Varbanov
This is implementing multi-stream decoder support. The multi-stream will be used to enable/disable the primary/secondary decoder outputs. Depending on formats on both decoder outputs we could implement downscale, dithering and supporting UBWC (universal bandwidth compression) formats. The UBWC compressed raw format is used to optimize interconnect bandwidth for bigger resolutions like 4K and hence we will get some power-saving benefits as well. Both decoder outputs are distinguished by buffer_type field in the HFI packets. For example HFI_BUFFER_OUTPUT is the buffer type for primary decoder output and HFI_BUFFER_OUTPUT2 is for secondary decoder output. Starting from Venus 4xx the DPB buffers format must be UBWC, so the multi-stream becomes mandatory for this Venus version. That means that we need to allocate internally in the driver a set of DPB buffers (with UBWC NV12 format) and give them to the firmware. The other decoder output (we called it OPB) format will be NV12 linear format and with the same resolution (or smaller in case the user wants to downscale). The DPB buffers are used for decoder reference frames and those have to be in a specific format (UBWC). So one decoder output is used to fill those reference buffers while the other output is used to fill the userspace buffers with the user requested format. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: move frame size calculations on common placeStanimir Varbanov
This move the calculations of raw and compressed buffer sizes on common helper and make it identical for encoder and decoder. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: vdec: a new function for output configurationStanimir Varbanov
Make a new function vdec_output_conf() for decoder output configuration. vdec_output_conf() will set properties via HFI interface related to the output configuration, and keep vdec_set_properties() which will set properties related to decoding parameters. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: vdec: get required input buffers as wellStanimir Varbanov
Rework and rename vdec_cap_num_buffers() to get the number of input buffers too. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: add a helper to return opb buffer sizesStanimir Varbanov
Add a helper function to return current output picture buffer size. OPB sizes can vary depending on the selected decoder output(s). Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: extend set_num_bufs helper with one more argumentStanimir Varbanov
Extend venus_helper_set_num_bufs() helper function with one more argument to set number of output buffers for the secondary decoder output. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers, vdec, venc: add helpers to set work mode and core usageStanimir Varbanov
These are new properties applicable to Venus version 4xx. Add the helpers and call them from decoder and encoder drivers. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: add a new helper to set raw formatStanimir Varbanov
The new helper will has one more argument for buffer type, that way the decoder can configure the format on it's secondary output. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: add buffer type argument to a helperStanimir Varbanov
This adds one more function argument to pass buffer type to set_output_resolution() helper function. That is a preparation to support secondary decoder output. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: core: delete not used buffer mode flagsStanimir Varbanov
Delete not used flag for capture buffer allocation mode and no longer used cap_bufs_mode_dynamic from instance structure. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: add helper function to set actual buffer sizeStanimir Varbanov
Add and use a helper function to set actual buffer size for particular buffer type. This is also preparation to use the second decoder output. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: add a helper function to set dynamic buffer modeStanimir Varbanov
Adds a new helper function to set dynamic buffer mode if it is supported by current HFI version. The dynamic buffer mode is set unconditionally for both decoder outputs. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: helpers: rename a helper function and use buffer mode from capsStanimir Varbanov
Rename is_reg_unreg_needed() to better name is_dynamic_bufmode() and use buffer mode from enumerated per codec capabilities. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: hfi_parser: add common capability parserStanimir Varbanov
This adds common capability parser for all supported Venus versions. Having it will help to enumerate better the supported raw formats and codecs and also the capabilities for every codec like max/min width/height, framerate, bitrate and so on. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: core, helpers: add two more clocks found in Venus 4xxStanimir Varbanov
Add two more clocks for Venus 4xx in core structure and create a new power enable function to handle it for 3xx/4xx versions. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: hfi_venus: add suspend functionality for Venus 4xxStanimir Varbanov
This adds suspend (power collapse) functionality by reusing the suspend function for Venus 3xx and also enables idle indicator property for Venus 4xx (where it is disabled by default). Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: hfi_venus: move set of default properties to core initStanimir Varbanov
This moves setting of default properties (firmware debug, idle indicator and low power mode) from session init to core init. All of those properties are need to be enabled/disabled early so that they could be used before the clients are even initialized. The other reason is to set idle indicator property early before we enter into venus_suspend function where we need to check for ARM9 WFI. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: hfi_venus: fix suspend function for venus 3xx versionsStanimir Varbanov
This fixes the suspend function for Venus 3xx versions by add a check for WFI (wait for interrupt) bit. This bit is on when the ARM9 is idle and entered in low power mode. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: venus: hfi_venus: add halt AXI support for Venus 4xxStanimir Varbanov
Add AXI halt support for version 4xx by using venus wrapper registers. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-22 18:15:55 +0000