summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2012-10-01[media] ivtv: disable a bunch of ioctls that are invalid for the decoder VBIHans Verkuil
The VBI capture for the decoder (/dev/vbi8) is special in that it captures the VBI stream embedded in an MPEG stream that is being decoded. A lot of the ioctls that would normally be valid have to be disabled since they make no sense for such a device, and v4l2-compliance will complain about that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] ivtv: fix incorrect service_set for the decoder VBI captureHans Verkuil
Found with v4l2-compliance. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] ivtv: don't allow g/s_frequency for output device nodesHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] ivtv: fix v4l2-compliance errors for the radio deviceHans Verkuil
- fix error code when attempting to read from write-only streams. - fix error code when attempting to write to read-only streams. - don't start capturing when polling on a radio node. - give the radio node its own file operations struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] ivtv: fix v4l2-compliance error: inconsistent std reportingHans Verkuil
The tuner input has a different standard mask than a S-Video or Composite input. Changing the standard should change tvnorms as well for all device nodes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] ivtv: DECODER_CMD v4l2-compliance fixesHans Verkuil
VIDIOC_DECODER_CMD didn't return EPERM when calling PAUSE or RESUME if no decoding is in progress. VIDIOC_G_ENC_INDEX didn't set entries_cap or return 0 if no decoding was in progress. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] sliced vbi: subdevs shouldn't clear the full v4l2_sliced_vbi_format ↵Hans Verkuil
struct Various subdevs cleared the full v4l2_sliced_vbi_format struct, when only the service_set/lines fields should have been cleared. Due to this the io_size field was wrongly cleared to 0, causing a v4l2-compliance error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] v4l2-ctrls: add a filter function to v4l2_ctrl_add_handlerHans Verkuil
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] rtl28xxu: [0ccd:00d3] TerraTec Cinergy T Stick RC (Rev. 3)Antti Palosaari
It is RTL2832U + E4000. Thanks to Nikolai Spasov reporting and testing! Reported-by: Nikolai Spasov <ns@codingrobot.com> Tested-by: Nikolai Spasov <ns@codingrobot.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] fc2580: use macro for 64 bit division and reminderGianluca Gennari
Fixes the following warnings on a 32 bit system with GCC 4.4.3 and kernel Ubuntu 2.6.32-43 32 bit: WARNING: "__udivdi3" [fc2580.ko] undefined! WARNING: "__umoddi3" [fc2580.ko] undefined! Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] fc2580: silence uninitialized variable warningGianluca Gennari
fc2580.c: In function 'fc2580_set_params': fc2580.c:118: warning: 'ret' may be used uninitialized in this function Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] fc2580: define const as UL to silence a warningGianluca Gennari
fc2580.c: In function 'fc2580_set_params': fc2580.c:150: warning: this decimal constant is unsigned only in ISO C90 Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] em28xx: do not set PCTV 290e LNA handler if fe attach failAntti Palosaari
It was a bug that could cause oops if demodulator attach was failed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] cxd2820r: use static GPIO config when GPIOLIB is undefinedAntti Palosaari
It is fallback condition as GPIOLIB seems to be disabled by default. Better solution is needed, maybe GPIOLIB could be enabled by default? Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] em28xx: implement FE set_lna() callbackAntti Palosaari
Make LNA run-time switching possible for PCTV nanoStick T2 290e! Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] v4l2-ioctl.c: fix overlay supportHans Verkuil
The vidioc_overlay op needs an unsigned int, not an unsigned int pointer. So we need a small function that dereferences the unsigned int pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-mfc: Fix second memory bank alignmentKamil Debski
Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Fix setup of initial links to FIMC entitiesSylwester Nawrocki
This patch fixes regression introduced in commit 4af813108b880e96a4b8b01e162f950a4aaa2475. Missing pointers to the sensor subdevs are restored along with subdev callback notifications to a corresponding FIMC instance driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] m5mols: Fix cast warnings from m5mols_[set/get]_ctrl_modeSylwester Nawrocki
Fixes following warnings on 64-bit architectures: m5mols.h: In function 'm5mols_set_ctrl_mode': m5mols.h:326:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] m5mols.h: In function 'm5mols_get_ctrl_mode': m5mols.h:331:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/media/i2c/m5mols/m5mols_controls.c:466:2: warning: cast from pointer to integer of different size Cc: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] m5mols: Add missing free_irq() on error pathSylwester Nawrocki
Make sure the interrupt is freed when driver probing fails. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: HeungJun Kim <riverful.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Don't allocate fimc-m2m video device dynamicallySylwester Nawrocki
There is no need to to dynamically allocate struct video_device for the M2M devices, so embed it instead in driver's private data structure as it is done in case of fimc-capture and fimc-lite, where it solves some bugs on cleanup paths. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Don't allocate fimc-capture video device dynamicallySylwester Nawrocki
This fixes potential invalid pointer de-reference, when media_entity_cleanup() is called before video device is unregistered. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Don't allocate fimc-lite video device structure dynamicallySylwester Nawrocki
This fixes potential invalid pointer de-reference, when media_entity_cleanup() is called after video_unregister_device, and video device structure memory is already freed. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Enable FIMC-LITE driver only for SOC_EXYNOS4x12Sylwester Nawrocki
Allow to compile-in the FIMC-LITE driver only on Exynos4212, Exynos4412 and Exynos5250 SoC where the device is available. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01tda1004x: Lock I2C bus during firmware loadMauro Carvalho Chehab
tda1004x doesn't allow firmware loads while it is busy with something else. Avoid it to happen by locking the I2C bus during firmware transfer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] media: mx2_camera: use managed functions to clean up codeShawn Guo
Use managed functions to clean up the error handling code and function mx2_camera_remove(). Along with the change, a few variables get removed from struct mx2_camera_dev. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] media: mx2_camera: remove dead code in mx2_camera_add_deviceShawn Guo
This is a piece of code becoming dead since commit 2c9ba37 ([media] V4L: mx2_camera: remove unsupported i.MX27 DMA mode, make EMMA mandatory). It should have been removed together with the commit. Remove it now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] anysee: do not remove CI when it is not attachedAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] e4000: fix crash when attach failsAntti Palosaari
Callbacks were set even attach failed. This leads calling .release() in error case and resulted crash. Reported-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] fc2580: fix crash when attach failsAntti Palosaari
Callbacks were set even attach failed. This leads calling .release() in error case and resulted crash. Reported-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_usb_v2: fix error handling for .tuner_attach()Antti Palosaari
fe was not set NULL after it was destroyed in tuner attach fail error case. Due to that it was destroyed again and Kernel oopsed. Reported-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] fc2580: small improvements for chip id checkAntti Palosaari
* better readability * make checkpatch.pl happy * few bytes smaller binary footprint Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cypress_firmware: refactor firmware downloadingAntti Palosaari
Refactor firmware download function. It also should fix one bug coming from usb_control_msg() message buffers. Taking buffers from the stack for usb_control_msg() is not allowed as it does not work on all architectures. Allocate buffers using kmalloc(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cypress_firmware: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: [0413:6680] DigitalNow Quad DVB-T ReceiverAntti Palosaari
It is 4 x RTL2832U + 4 x FC0012 in one PCIe board. Of course there is a PCIe USB host controller too. Big thanks for Darryl Bond reporting and testing that! Reported-by: Darryl Bond <darryl.bond@gmail.com> Tested-by: Darryl Bond <darryl.bond@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] Support for Asus MyCinema U3100Mini PlusOliver Schinagl
This is initial support for the Asus MyCinema U3100Mini Plus. The driver in its current form gets detected and loads properly. Scanning using dvbscan works without problems, Locking onto a channel using tzap also works fine. Only playback using tzap -r + mplayer was tested and was fully functional. It uses the af9035 USB Bridge chip, with an af9033 demodulator. The tuner used is the FCI FC2580. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: use proper config for e4000 tunerAntti Palosaari
Do not abuse anymore fc0012 tuner config. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl2832: add configuration for e4000 tunerAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: remove fc0013 tuner fe callbackAntti Palosaari
It is just stub implementation, remove it. Also add debug for beginning of fe callback. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: move rtl2831u tuner probing to .read_config()Antti Palosaari
Move rtl2831u tuner probing correct place. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: do not return error for unimplemented fe callbackAntti Palosaari
Use of frontend callback is highly hardware design dependent and whole callback could be optional in many cases. Returning error by default when callback is not implemented is stupid. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: masked reg writeAntti Palosaari
Implement masked register write and use it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: move rtl2832u tuner probing to .read_config()Antti Palosaari
Move rtl2832u tuner probing correct place. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] af9035: declare MODULE_FIRMWAREAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_usb_v2: call streaming_ctrl() before kill urbsAntti Palosaari
Logically it is better ask hardware to stop streaming before killing urbs carrying stream. Earlier it was just opposite. Now code runs: * submit urbs * start streaming ** streaming ongoing ** * stop streaming * kill urbs Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_usb_v2: rename module dvb_usbv2 => dvb_usb_v2Antti Palosaari
I think it is better name. At that phase renaming is quite painless as module is not yet merged to mainline Kernel. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cxd2820r: use Kernel GPIO for GPIO accessAntti Palosaari
Currently there is LNA behind cxd2820r demodulator GPIO. Use Kernel GPIO interface to access those GPIOs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cxd2820r: switch to Kernel dev_* loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] add LNA support for DVB APIAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_frontend: do not allow statistic IOCTLs when sleepingAntti Palosaari
Demodulator cannot perform statistic IOCTLs when it is not tuned. Return -EAGAIN in such case. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 13:56:12 +0000