| Age | Commit message (Collapse) | Author |
|---|
|
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Linux 5.9-rc7
* tag 'v5.9-rc7': (683 commits)
Linux 5.9-rc7
mm/thp: Split huge pmds/puds if they're pinned when fork()
mm: Do early cow for pinned pages during fork() for ptes
mm/fork: Pass new vma pointer into copy_page_range()
mm: Introduce mm_struct.has_pinned
mm: validate pmd after splitting
mm: don't rely on system state to detect hot-plug operations
mm: replace memmap_context by meminit_context
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
lib/memregion.c: include memregion.h
lib/string.c: implement stpcpy
mm/migrate: correct thp migration stats
mm/gup: fix gup_fast with dynamic page table folding
mm: memcontrol: fix missing suffix of workingset_restore
mm, THP, swap: fix allocating cluster for swapfile by mistake
mm: slab: fix potential double free in ___cache_free
Documentation/llvm: Fix clang target examples
io_uring: ensure async buffered read-retry is setup properly
KVM: SVM: Add a dedicated INVD intercept routine
io_uring: don't unconditionally set plug->nowait = true
...
|
|
There are two different variants for Hauppauge WinTV MiniCard:
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = 29,
.board_cfg.foreign_lna0_ctrl = 29,
.rf_switch = 17,
.board_cfg.rf_switch_uhf = 17,
},
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
.name = "Hauppauge WinTV MiniCard Rev 2",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = -1,
},
As it can be seen, the RF part of the definitions are different.
So, better to use different names in order to distinguish
between them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add proper control type to the recently introduced
V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE control. This will forward it to
v4l2_ctrl_new_std_menu() not v4l2_ctrl_new_std(), what causes the
failure. This fixes the following warning during driver initialization:
s5p_mfc_enc_ctrls_setup:2671: Adding control (18) failed
s5p_mfc_open:811: Failed to setup mfc controls
Fixes: ef56b3ee4f54 ("media: s5p-mfc: Use standard frame skip mode control")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Neither Vlc nor Gstreamer likes the PES_scrambling_control bits.
In the case of GST, this can be seen with:
$ GST_DEBUG=2 LANG=C gst-play-1.0 pcm_audio.ts
...
0:00:00.097973439 12308 0x55f7ddd155e0 WARN pesparser pesparse.c:411:mpegts_parse_pes_header: Wrong '0x10' marker before PES_scrambling_control (0x40)
0:00:00.097987026 12308 0x55f7ddd155e0 WARN tsdemux tsdemux.c:2314:gst_ts_demux_parse_pes_header: Error parsing PES header. pid: 0x111 stream_type: 0x6
...
So, change, it. After such change, the stream now plays
fine with Vlc, Gstreamer, ffmpeg - and with programs
that use such libraries, like Kaffeine.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When compared with a stream generated via ffmpeg, it can be
noticed that the PES doesn't contain any PCR info. That could
cause problems with userspace decoding. So, rewrite the
logic that fills the adaptation info, in order to allow it
to add PCR frames without breaking frame alignment.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Instead of passing struct pes_ts_header_write_args fields as
function parameters, just pass a pointer to the struct.
That would allow adding more args without needing to change
the function prototype.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
optinal -> optional
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In order to better test userspace applications, add an encoding
for the strings. The original channel string is also too big.
As we're just playing the first compasses of the 5th Beethoven
Symphony, change the service name to just "Beethoven". Also,
add a provider's name. For such purpose, let's point it to
the Linux media community website.
With such changes, the SDT table now looks more like one got
from a real digital TV channel:
SDT
| table_id 0x42
| section_length 44
| one 2
| zero 1
| syntax 1
| transport_stream_id 1860
| current_next 1
| version 0
| one2 3
| section_number 0
| last_section_number 0
| network_id 65281
| reserved 255
|\
|- service 0x0880
| EIT schedule 0
| EIT present following 0
| free CA mode 0
| running status 4
| descriptor length 27
| 0x48: service_descriptor
| service type 1
| provider 'LinuxTV.org'
| name 'Beethoven'
|_ 1 services
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There's no reason to use static vars to store PSI version
numbers.
Also, currently, version numbers are starting with 0x01,
because there's a code being called that increases it to
1 for all table initializer code, as the code may support
dynamic changes at the PS tables on some future.
So, let's just initialize them to 0x1f, in order for the
versions to be reported as starting from 0.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This field should point to the network ID, and has different
ranges for cable, terrestrial or satellite. It also has
an special range for temporary private usage.
For now, let's use the temporary private one. Once the
Network Information Table (NIT) gets added, this should be
reviewed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Changeset 870e350d4e39 ("media: vidtv: get rid of ENDIAN_BITFIELD nonsense")
was incomplete. There are still some wrong endannes logic at
the driver. Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There's no need to have a check when setting timing.past_jiffies,
as we can simply do the initialization earlier at vidtv_mux_init().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The same markup are there twice, causing warnings with
Sphinx 3.x. Drop the second copy.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(struct scatterlist),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix memory leak in node_probe.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Extend the list of supported formats to include all RGB layouts of RAW8.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Extend the list of supported formats to include all RGB layouts of RAW8.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
GPIO IR receive is much rely on interrupt response, uneven interrupt
latency will lead to incorrect timing, so the decoder fails to decode
it. The issue is particularly acute on some systems which support
cpuidle, not all, dynamically disable and enable cpuidle can solve this
problem to a great extent.
However, there is a downside to this approach, the measurement of header
on the first frame may incorrect. Test on i.MX8M serials, when enable
cpuidle, interrupt latency could be about 500us.
With this patch:
1. has no side effect on non-cpuidle system, even runtime pm api won't
be invoked to avoid a bunch of pm busy work for devices that do not need
it, including spinlocks, ktime, etc.
2. latency is still much longer for the first gpio interrupt on cpuidle
system, so the first frame may not be decoded. Generally, RC would transmit
multiple frames at once press, we can sacrifice the first frame.
3. add "linux,autosuspend-period" property in device tree if you also
suffer this cpuidle issue.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Constify a number of static structs that were not modified. In order to
be able to do that, const input arguments to a couple of functions that
not modify their argument. This allows the compiler to put them in
read-only memory, resulting in about 6k memory being read-only, and the
resulting module is 400 bytes smaller.
Before:
text data bss dec hex filename
15492 6873 0 22365 575d drivers/media/dvb-frontends/tda18271c2dd.ko
After:
text data bss dec hex filename
21021 897 0 21918 559e drivers/media/dvb-frontends/tda18271c2dd.ko
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
usb_free_coherent() is safe with NULL addr and this check is
not required.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Make sure the endpoint is ISOC in and do not hard code USB_DIR_IN.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The .suspend() and .resume() callbacks are not defined for this driver.
Thus, just the unlisting of PM pointers in the struct initializer will make
no change in its behavior. Still unlisting is necessary so as to get rid of
.suspend and .resume pointers as they are part of the legacy framework and
should not be used in the driver code explicitly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If you do sanity checks, you should do them for both endpoints.
Hence introduce checking for endpoint type for the output
endpoint, too.
Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If rtl2832_sdr_probe() encounters an unsupported tuner it cleans up
everything and returns 0. This can result in various bad things later.
The patch sets the error code on the corresponding path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
delta_run_work() calls delta_get_sync() that increments
the reference counter. In case of failure, decrement the reference
count by calling delta_put_autosuspend().
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
And also, when the call of function vpe_runtime_get() failed,
we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails
inside vpe_runtime_get().
Fixes: 4571912743ac ("[media] v4l: ti-vpe: Add VPE mem to mem driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not
called in error handling paths. Thus replace the jump target
"err_release_buffers" by "err_pm_putw".
Fixes: 152e0bf60219 ("media: stm32-dcmi: add power saving support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Fixes: c5086f130a77 ("[media] s5p-mfc: Use clock gating only on MFC v5 hardware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
PM runtime put is not called in error handling paths.
Thus call pm_runtime_put_sync() if pm_runtime_get_sync() fails.
Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Fixes: 6eaafbdb668b ("[media] v4l: rcar-fcp: Keep the coding style consistent")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus call pm_runtime_put_noidle()
if pm_runtime_get_sync() fails.
Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus call pm_runtime_put_noidle()
if pm_runtime_get_sync() fails.
Fixes: 2a18fbec1dab ("media: rcar-vin: Move pm_runtime_{get,put} out of helpers")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus call pm_runtime_put_noidle()
if pm_runtime_get_sync() fails.
Fixes: 90dedce9bc54 ("media: rcar-vin: add function to manipulate Gen3 chsel value")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When coda_firmware_request() returns an error code,
a pairing runtime PM usage counter decrement is needed
to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Also, call pm_runtime_disable() when pm_runtime_get_sync() returns
an error code.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enable YDS bit if bus_width and data_shift is set to 8 in parallel mode
for MEDIA_BUS_FMT_UYVY8_2X8 format.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the SoC specific information for RZ/G2H (R8A774E1) SoC. Also add
the routing information between CSI2 and VIN (which is similar to
R-Car H3 except it lacks CSI41).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the MIPI CSI-2 driver support for RZ/G2H (R8A774E1) SoC.
The CSI-2 module of RZ/G2H is similar to R-Car H3.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In bttv_probe if some functions such as pci_enable_device,
pci_set_dma_mask and request_mem_region fails the allocated
memory for btv should be released.
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves. The required operations are
done by PCI core.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The rcar-vin driver also supports RZ/G{1,2} SoC's, update the description
to reflect this.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The rcar-csi2 driver also supports RZ/G2 SoC's, update the description
to reflect this.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
