summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2014-11-21[media] rc-core: fix toggle handling in the rc6 decoderDavid Härdeman
The toggle bit shouldn't be cleared before the toggle value is calculated. This should probably go into 3.17.x as well. Fixes: 120703f9eb32 ([media] rc-core: document the protocol type) Cc: stable@vger.kernel.org # For v3.17 Tested-by: Stephan Raue <mailinglists@openelec.tv> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-21[media] cx23885: use sg = sg_next(sg) instead of sg++Hans Verkuil
The cx23885 driver still used sg++ instead of sg = sg_next(sg). This worked with vb1 since that filled in the sglist manually, page-by-page, but it fails with vb2 which uses core scatterlist code that can combine contiguous scatterlist entries into one larger entry. This bug led to the following crash as reported by Mariusz: [20712.990258] BUG: Bad page state in process vb2-cx23885[0] pfn:2ca34 [20712.990265] page:ffffea00009c3b60 count:-1 mapcount:0 mapping: (null) index:0x0 [20712.990266] flags: 0x4000000000000000() [20712.990268] page dumped because: nonzero _count [20712.990269] Modules linked in: tun binfmt_misc nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_mark xt_REDIRECT xt_limit xt_conntrack xt_nat xt_tcpudp iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables sit ip_tunnel nvidia(PO) stb6100 stv090x cx88_dvb videobuf_dvb cx88_vp3054_i2c tuner kvm_amd kvm cx8802 k10temp cx8800 cx88xx btcx_risc videobuf_dma_sg videobuf_core usb_storage ds2490 usbhid ftdi_sio cx23885 tveeprom cx2341x videobuf2_dvb videobuf2_core videobuf2_dma_sg videobuf2_memops asus_atk0110 snd_emu10k1 snd_hwdep snd_util_mem snd_ac97_codec ac97_bus snd_rawmidi snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd w1_therm wire ipv6 [20712.990301] CPU: 2 PID: 26942 Comm: vb2-cx23885[0] Tainted: P B W O 3.18.0-rc5-00001-gb3652d1 #2 [20712.990303] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105 07/23/2010 [20712.990305] ffffffff81765734 ffff880137683a78 ffffffff815b6b32 0000000000000006 [20712.990307] ffffea00009c3b60 ffff880137683aa8 ffffffff8108ec27 ffffffff81765712 [20712.990309] ffffffff8189c840 0000000000000246 ffffea00009c3b60 ffff880137683b78 [20712.990312] Call Trace: [20712.990317] [<ffffffff815b6b32>] dump_stack+0x46/0x58 [20712.990321] [<ffffffff8108ec27>] bad_page+0xe9/0x107 [20712.990323] [<ffffffff810912ca>] get_page_from_freelist+0x3b2/0x505 [20712.990326] [<ffffffff8109150a>] __alloc_pages_nodemask+0xed/0x65f [20712.990330] [<ffffffff81047a52>] ? ttwu_do_activate.constprop.78+0x57/0x5c [20712.990332] [<ffffffff81049ff3>] ? try_to_wake_up+0x21b/0x22d [20712.990336] [<ffffffff810070f4>] dma_generic_alloc_coherent+0x6e/0xf5 [20712.990339] [<ffffffff810261a9>] gart_alloc_coherent+0x105/0x114 [20712.990341] [<ffffffff81025963>] ? flush_gart+0x39/0x3d [20712.990343] [<ffffffff810260a4>] ? gart_map_sg+0x3a0/0x3a0 [20712.990349] [<ffffffffa0141a1e>] cx23885_risc_databuffer+0xa7/0x133 [cx23885] [20712.990354] [<ffffffffa0142764>] cx23885_buf_prepare+0x121/0x134 [cx23885] [20712.990359] [<ffffffffa0144210>] buffer_prepare+0x14/0x16 [cx23885] [20712.990363] [<ffffffffa011f101>] __buf_prepare+0x190/0x279 [videobuf2_core] [20712.990366] [<ffffffffa011d906>] ? vb2_queue_or_prepare_buf+0xb8/0xc0 [videobuf2_core] [20712.990369] [<ffffffffa011f34b>] vb2_internal_qbuf+0x51/0x1e5 [videobuf2_core] [20712.990372] [<ffffffffa0120537>] vb2_thread+0x199/0x1f6 [videobuf2_core] [20712.990376] [<ffffffffa012039e>] ? vb2_fop_write+0xdf/0xdf [videobuf2_core] [20712.990379] [<ffffffff81043e61>] kthread+0xdf/0xe7 [20712.990381] [<ffffffff81043d82>] ? kthread_create_on_node+0x16d/0x16d [20712.990384] [<ffffffff815bd46c>] ret_from_fork+0x7c/0xb0 [20712.990386] [<ffffffff81043d82>] ? kthread_create_on_node+0x16d/0x16d Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Mariusz Bialonczyk <manio@skyboo.net> Tested-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-21[media] s2255drv: fix payload size for JPG, MJPEGsensoray-dev
length is the size of the buffer, not the payload. That's set using vb2_set_plane_payload(). Signed-off-by: Dean Anderson <linux-dev@sensoray.com> Cc: <stable@vger.kernel.org> # for v3.15 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-21[media] solo6x10: fix a race in IRQ handlerKrzysztof Hałasa
The IRQs have to be acknowledged before they are serviced, otherwise some events may be skipped. Also, acknowledging IRQs just before returning from the handler doesn't leave enough time for the device to deassert the INTx line, and for bridges to propagate this change. This resulted in twice the IRQ rate on ARMv6 dual core CPU. Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl> Acked-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net> Tested-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] smiapp: Only some selection targets are settableSakari Ailus
Setting a non-settable selection target caused BUG() to be called. The check for valid selections only takes the selection target into account, but does not tell whether it may be set, or only get. Fix the issue by simply returning an error to the user. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Cc: stable@vger.kernel.org # for v3.10 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] sp2: sp2_init() can be staticFengguang Wu
drivers/media/dvb-frontends/sp2.c:269:5: sparse: symbol 'sp2_init' was not declared. Should it be static? drivers/media/dvb-frontends/sp2.c:351:5: sparse: symbol 'sp2_exit' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb:tc90522: fix always-false expressionAkihiro Tsukada
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-core: set default properties of ISDB-SAkihiro Tsukada
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb:tc90522: fix stats reportAkihiro Tsukada
* report the fixed per-transponder symbolrate instead of per-TS ones * add output TS-ID report Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] vivid: default to single planar device instancesHans Verkuil
The default used to be that the first vivid device instance was single planar, the second multi planar, the third single planar, etc. However, that turned out to be unexpected and awkward. Change the driver to always default to single planar. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] imon: fix other RC type protocol supportUlrich Eckhardt
With kernel 3.17 the imon remote control for device 15c2:0034 does not work anymore, which uses the OTHER protocol. Only the front panel buttons which uses the RC6 protocol are working. Adds the missing comparison for the RC_BIT_OTHER. Cc: stable@vger.kernel.org # for Kernel 3.17 Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] ir-hix5hd2 fix build warningZhangfei Gao
Change CONFIG_PM to CONFIG_PM_SLEEP to solve warning: 'hix5hd2_ir_suspend' & 'hix5hd2_ir_resume' defined but not used Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] ds3000: fix LNB supply voltage on Tevii S480 on initializationUlrich Eckhardt
The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not automatically power down. This blocks other receivers connected to a satellite channel router (EN50494), since the receivers can not send the required DiSEqC sequences when the Tevii card is connected to a the same SCR. This patch switches off the LNB supply voltage on initialization of the frontend. [mchehab@osg.samsung.com: add a comment about why we're explicitly turning off voltage at device init] Cc: stable@vger.kernel.org Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] rc5-decoder: BZ#85721: Fix RC5-SZ decodingMauro Carvalho Chehab
Changeset e87b540be2dd broke RC5-SZ decoding, as it forgot to add the extra bit check for the enabled protocols at the beginning of the logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] rc-core: fix protocol_change regression in ir_raw_event_registerTomas Melin
IR receiver using nuvoton-cir and lirc required additional configuration steps after upgrade from kernel 3.16 to 3.17-rcX. Bisected regression to commit da6e162d6a4607362f8478c715c797d84d449f8b ("[media] rc-core: simplify sysfs code"). The regression comes from adding function change_protocol in ir-raw.c. It changes behaviour so that only the protocol enabled by driver's map_name will be active after registration. This breaks user space behaviour, lirc does not get key press signals anymore. Enable lirc protocol by default for ir raw decoders to restore original behaviour. Cc: stable@vger.kernel.org # for v3.17 Signed-off-by: Tomas Melin <tomas.melin@iki.fi> Acked-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] s5p-jpeg: Avoid -Wuninitialized warning in s5p_jpeg_parse_hdrJacek Anaszewski
Initialize components variable in order to avoid the possibility of using it uninitialized. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] s5p-fimc: Only build suspend/resume for PMThierry Reding
If power management is disabled these functions become unused, so there is no reason to build them. This fixes a couple of build warnings when PM(_SLEEP,_RUNTIME) is not enabled. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] s5p-jpeg: Only build suspend/resume for PMThierry Reding
If power management is disabled these function become unused, so there is no reason to build them. This fixes a couple of build warnings when PM(_SLEEP,_RUNTIME) is not enabled. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] Remove references to non-existent PLAT_S5P symbolSylwester Nawrocki
The PLAT_S5P Kconfig symbol was removed in commit d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code"). However, there are still some references to that symbol left, fix that by substituting them with ARCH_S5PV210. Fixes: d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code") Reported-by: Paul Bolle <pebolle@tiscali.nl> Cc: <stable@vger.kernel.org> # for 3.17 Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] videobuf-dma-contig: set vm_pgoff to be zero to pass the sanity ↵Fancy Fang
check in vm_iomap_memory() When user requests V4L2_MEMORY_MMAP type buffers, the videobuf-core will assign the corresponding offset to the 'boff' field of the videobuf_buffer for each requested buffer sequentially. Later, user may call mmap() to map one or all of the buffers with the 'offset' parameter which is equal to its 'boff' value. Obviously, the 'offset' value is only used to find the matched buffer instead of to be the real offset from the buffer's physical start address as used by vm_iomap_memory(). So, in some case that if the offset is not zero, vm_iomap_memory() will fail. Signed-off-by: Fancy Fang <chen.fang@freescale.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] tw68: remove bogus I2C_ALGOBIT dependencyHans Verkuil
tw68 doesn't use i2c at all, so remove this bogus dependency to prevent this warning: warning: (CAN_PEAK_PCIEC && SFC && IGB && VIDEO_TW68 && DRM && FB_DDC && FB_VIA) selects I2C_ALGOBIT which has unmet direct dependencies (I2C) CC [M] drivers/i2c/algos/i2c-algo-bit.o ../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus': ../drivers/i2c/algos/i2c-algo-bit.c:658:33: error: 'i2c_add_adapter' undeclared (first use in this function) ../drivers/i2c/algos/i2c-algo-bit.c:658:33: note: each undeclared identifier is reported only once for each function it appears in ../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus': ../drivers/i2c/algos/i2c-algo-bit.c:664:33: error: 'i2c_add_numbered_adapter' undeclared (first use in this function) ../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_bus': ../drivers/i2c/algos/i2c-algo-bit.c:659:1: warning: control reaches end of non-void function [-Wreturn-type] ../drivers/i2c/algos/i2c-algo-bit.c: In function 'i2c_bit_add_numbered_bus': ../drivers/i2c/algos/i2c-algo-bit.c:665:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] usbvision-video: two use after freesDan Carpenter
The lock has been freed in usbvision_release() so there is no need to call mutex_unlock() here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] tw68: remove deprecated IRQF_DISABLEDFabian Frederick
See include/linux/interrupt.h: "This flag is a NOOP and scheduled to be removed" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] xc5000: use after free in release()Dan Carpenter
I moved the call to hybrid_tuner_release_state(priv) after "priv->firmware" dereference. Fixes: 5264a522a597 ('[media] media: tuner xc5000 - release firmwware from xc5000_release()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] em28xx-input: NULL dereference on errorDan Carpenter
We call "kfree(ir->i2c_client);" in the error handling and that doesn't work if "ir" is NULL. Fixes: 78e719a5f30b ('[media] em28xx-input: i2c IR decoders: improve i2c_client handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24[media] wl128x: fix fmdbg compiler warningHans Verkuil
fmdrv_common.c: In function 'fm_download_firmware': fmdrv_common.c:1259:2: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat=] fmdbg("Firmware(%s) length : %d bytes\n", fw_name, fw_entry->size); ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] hackrf: harmless off by one in debug codeDan Carpenter
My static checker complains that "i" could be one element beyond the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] cx23885: initialize config structs for T9580Olli Salonen
The config structs used for DVBSky T9580 were not initialized. This patch fixes that. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] v4l: uvcvideo: Fix buffer completion size checkLaurent Pinchart
Commit e93e7fd9f5a3fffec7792dbcc4c3574653effda7 ("v4l2: uvcvideo: Allow using larger buffers") reworked the buffer size sanity check at buffer completion time to use the frame size instead of the allocated buffer size. However, it introduced two bugs in doing so: - it assigned the allocated buffer size to the frame_size field, instead of assigning the correct frame size - it performed the assignment in the S_FMT handler, resulting in the frame_size field being uninitialized if the userspace application doesn't call S_FMT. Fix both issues by removing the frame_size field and validating the buffer size against the UVC video control dwMaxFrameSize. Fixes: e93e7fd9f5a3 ("v4l2: uvcvideo: Allow using larger buffers") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] vivid: fix buffer overrunHans Verkuil
The random_line buffer must be twice the maximum width, but it only allocated the maximum width, so it was only half the size it needed to be. Surprisingly I never saw the kernel fail on this, but the same TPG code used in qv4l2 crashed and valgrind helped me track this bug down. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] saa7146: Create a device name before it's usedLubomir Rintel
request_irq() uses it, tries to create a procfs file with an empty name otherwise. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83771 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] em28xx: fix uninitialized variable warningHans Verkuil
Fix this daily build warning: In file included from build/media_build/v4l/em28xx-core.c:35:0: build/media_build/v4l/em28xx-core.c: In function 'em28xx_audio_setup': build/media_build/v4l/em28xx.h:798:2: warning: 'vid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_INFO "%s: "fmt,\ ^ build/media_build/v4l/em28xx-core.c:507:6: note: 'vid' was declared here u32 vid; ^ As far as I can tell 'vid' can not really be used uninitialized here, but the code is sufficiently complex that apparently gcc can't figure that out. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] vivid: fix Kconfig FB dependencyHans Verkuil
The vivid driver depends on FB, update the Kconfig accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] anysee: make sure loading modules is constKees Cook
Make sure that loaded modules are const char strings so we don't load arbitrary modules in the future, nor allow for format string leaks in the module request call. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] af9035: make sure loading modules is constKees Cook
Make sure that loaded modules are const char strings so we don't load arbitrary modules in the future, nor allow for format string leaks in the module request call. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-15V4L2: mx3_camer: use dmaengine_pause() APIVinod Koul
The drivers should use dmaengine_pause() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-10Merge tag 'media/v3.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new IR driver: hix5hd2-ir - the virtual test driver (vivi) was replaced by vivid, with has an almost complete set of features to emulate most v4l2 devices and properly test all sorts of userspace apps - the as102 driver had several bugs fixed and was properly split into a frontend and a core driver. With that, it got promoted from staging into mainstream - one new CI driver got added for CIMaX SP2/SP2HF (sp2 driver) - one new frontend driver for Toshiba ISDB-T/ISDB-S demod (tc90522) - one new PCI driver for ISDB-T/ISDB-S (pt3 driver) - saa7134 driver got support for go7007-based devices - added a new PCI driver for Techwell 68xx chipsets (tw68) - a new platform driver was added (coda) - new tuner drivers: mxl301rf and qm1d1c0042 - a new DVB USB driver was added for DVBSky S860 & similar devices - added a new SDR driver (hackrf) - usbtv got audio support - several platform drivers are now compiled with COMPILE_TEST - a series of compiler fixup patches, making sparse/spatch happier with the media stuff and removing several warnings, especially on those platform drivers that didn't use to compile on x86 - Support for several new modern devices got added - lots of other fixes, improvements and cleanups * tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ...
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-09Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab
* patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
2014-10-09[media] ir-hix5hd2: fix build on c6x archMauro Carvalho Chehab
While not all archs have readl_relaxed, we need to add a hack at the driver to allow it to COMPILE_TEST on all archs: drivers/media/rc/ir-hix5hd2.c: In function ‘hix5hd2_ir_config’: drivers/media/rc/ir-hix5hd2.c:100:2: error: implicit declaration of function ‘readl_relaxed’ [-Werror=implicit-function-declaration] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
2014-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc Pull documentation updates from Jiri Kosina: "Updates to kernel documentation. I took this over (hopefully temporarily) from Randy who was not willing to maintain it any longer. This pile mostly is a relay of queue that Randy already had in his tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc: Documentation: fix broken v4l-utils URL Documentation: update include path for mpssd Documentation: correct parameter error for dma_mapping_error MAINTAINERS: update location of linux-doc tree Documentation: remove networking/.gitignore tools: add more endian.h macros Make Documenation depend on headers_install Docs: this_cpu_ops: remove redundant add forms Documentation: disable vdso_test to avoid breakage with old glibc Documentation: update vDSO makefile to build portable examples Documentation: update .gitignore files Documentation: support glibc versions without htole macros v4l2-pci-skeleton: Only build if PCI is available Documentation: fix misc. warnings Documentation: make functions static to avoid prototype warnings Documentation: add makefiles for more targets Documentation: use subdir-y to avoid unnecessary built-in.o files
2014-10-03Documentation: fix broken v4l-utils URLMichael Opdenacker
This replaces http://git.linuxtv.org/v4l-utils/ (broken link) by http://git.linuxtv.org/cgit.cgi/v4l-utils.git/ Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-28Revert "[media] media: em28xx - remove reset_resume interface"Mauro Carvalho Chehab
The reset_resume call is needed, otherwise it will break resume on some conditions, depending on the usb ehci/xhci controller. This reverts commit b89193e0b06f44f48e3bf897a5b5cb4a7aff3359. Reported-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-28[media] pt3: fix DTV FE I2C driver load error pathsAntti Palosaari
Get rid of 'module_is_live' usage. on x86_64: when CONFIG_MODULES is not enabled: ../drivers/media/pci/pt3/pt3.c: In function 'pt3_attach_fe': ../drivers/media/pci/pt3/pt3.c:433:6: error: implicit declaration of function 'module_is_live' [-Werror=implicit-function-declaration] Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Akihiro Tsukada <tskd08@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26Revert "[media] media: em28xx - remove reset_resume interface"Mauro Carvalho Chehab
The reset_resume call is needed, otherwise it will break resume on some conditions, depending on the usb ehci/xhci controller. This reverts commit b89193e0b06f44f48e3bf897a5b5cb4a7aff3359. Reported-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] exynos4-is: fix some warnings when compiling on arm64Mauro Carvalho Chehab
Got those warnings when compiling with gcc 4.9.1 for arm64: drivers/media/platform/exynos4-is/fimc-isp-video.c: In function ‘isp_video_capture_buffer_queue’: drivers/media/platform/exynos4-is/fimc-isp-video.c:221:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat=] isp_dbg(2, &video->ve.vdev, ^ drivers/media/platform/exynos4-is/fimc-is.c: In function ‘fimc_is_load_firmware’: drivers/media/platform/exynos4-is/fimc-is.c:391:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Wformat=] dev_err(dev, "wrong firmware size: %d\n", fw->size); ^ In file included from include/linux/printk.h:260:0, from include/linux/kernel.h:13, from include/linux/kernfs.h:10, from include/linux/sysfs.h:15, from include/linux/kobject.h:21, from include/linux/device.h:17, from drivers/media/platform/exynos4-is/fimc-is.c:15: include/linux/dynamic_debug.h:64:16: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=] static struct _ddebug __aligned(8) \ ^ include/linux/dynamic_debug.h:84:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/device.h:1106:2: note: in expansion of macro ‘dynamic_dev_dbg’ dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ ^ drivers/media/platform/exynos4-is/fimc-is.c:419:2: note: in expansion of macro ‘dev_dbg’ dev_dbg(dev, "FW size: %d, paddr: %#x\n", fw->size, is->memory.paddr); ^ include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=] static struct _ddebug __aligned(8) \ ^ include/linux/dynamic_debug.h:84:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/device.h:1106:2: note: in expansion of macro ‘dynamic_dev_dbg’ dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ ^ drivers/media/platform/exynos4-is/fimc-is.c:419:2: note: in expansion of macro ‘dev_dbg’ dev_dbg(dev, "FW size: %d, paddr: %#x\n", fw->size, is->memory.paddr); ^ drivers/media/platform/exynos4-is/fimc-is.c: In function ‘fimc_is_hw_initialize’: include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=] static struct _ddebug __aligned(8) \ ^ include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’ dynamic_pr_debug(fmt, ##__VA_ARGS__) ^ drivers/media/platform/exynos4-is/fimc-is.c:696:2: note: in expansion of macro ‘pr_debug’ pr_debug("shared region: %#x, parameter region: %#x\n", ^ include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat=] static struct _ddebug __aligned(8) \ ^ include/linux/dynamic_debug.h:76:2: note: in expansion of macro ‘DEFINE_DYNAMIC_DEBUG_METADATA’ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/printk.h:266:2: note: in expansion of macro ‘dynamic_pr_debug’ dynamic_pr_debug(fmt, ##__VA_ARGS__) ^ drivers/media/platform/exynos4-is/fimc-is.c:696:2: note: in expansion of macro ‘pr_debug’ pr_debug("shared region: %#x, parameter region: %#x\n", ^ Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] usb drivers: use %zu instead of %zdMauro Carvalho Chehab
size_t is unsigned. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] pci drivers: use %zu instead of %zdMauro Carvalho Chehab
size_t is unsigned. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 03:18:16 +0000