summaryrefslogtreecommitdiff
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13155): uvcvideo: Add a module parameter to set the streaming ↵Laurent Pinchart
control timeout The default streaming control timeout was found by Ondrej Zary to be too low for some Logitech webcams. With kernel 2.6.22 and newer they would timeout during initialization unles the audio function was initialized before the video function. Add a module parameter to set the streaming control timeout and increase the default value from 1000ms to 3000ms to fix the above problem. Thanks to Ondrej Zary for investigating the issue and providing an initial patch. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13154): uvcvideo: Handle garbage at the end of streaming interface ↵Laurent Pinchart
descriptors At least one 5986:0241 webcam model includes vendor-specific descriptors at the end of its streaming interface descriptors. Print an information UVC_TRACE_DESCR message and try to continue parsing the descriptors rather than bailing out with an error. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13153): uvcvideo: Fix uvc_alloc_urb_buffers()Ming Lei
This patch sets stream->urb_size as psize*npackets before calling uvc_alloc_urb_buffers, which may fix a possible failure of usb_buffer_free in case usb_buffer_alloc returns NULL. The patch is based on the ideas below: 1,If usb_buffer_alloc can't allocate a buffer sucessfully, uvc_free_urb_buffers will be called to free the allocated buffers, and stream->urb_size is required to be passed to usb_buffer_free; 2,uvc_free_urb_buffers can reset stream->urb_size. This patch is against linux-v2.6.31-next-20090926. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13152): uvcvideo: Rely on videodev to reference-count the deviceLaurent Pinchart
The uvcvideo driver has a driver-wide lock and a reference count to protect against a disconnect/open race. Now that videodev handles the race itself, reference-counting in the driver can be removed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13151): uvcvideo: Dismiss privileges when freeing video buffersLaurent Pinchart
Dismiss privileges on the file handle when calling VIDIOC_REQBUFS with a buffer count of 0. This allows applications to release the streaming permissions on the file handle without closing it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13150): uvcvideo: Don't acquire privileges in VIDIOC_TRY_FMTLaurent Pinchart
The VIDIOC_TRY_FMT ioctl doesn't interfere with video streaming and thus should succeed on an unprivileged file handle. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13149): uvcvideo: Add a new UVC_TRACE_VIDEO trace levelLaurent Pinchart
Use the trace level for messages related to video URB buffers allocation and alternate setting selection. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13148): uvcvideo: Handle V4L2_CTRL_TYPE_BUTTON control type in ↵Laurent Pinchart
VIDIOC_QUERYCTRL Return minimum, maximum and step set to 0 without querying the hardware. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13146): gspca_ov519: cleanup sensor handlingHans de Goede
There were various "if (sensor == foo)" pieces of code inside ov519.c, move these bits to the sensor specific init functions, where they belong. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13145): gscpa_ov519: add support for the ovfx2 bridgeHans de Goede
gscpa_ov519: add support for the ovfx2 bridge Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13144): gspca_ov519: Add support for OV2610 and OV3610 sensorsHans de Goede
This patch adds support for the OV2610 and OV3610 sensors to the gspca ov519 subdriver. This is a preparation patch for adding ovfx2 bridge support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13143): gspca_ov519 cleanup sensor detectionHans de Goede
gspca_ov519 cleanup sensor detection Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13142): gspca_mr97310a: small tweak to CIF sensor type 1 exposure ↵Hans de Goede
setting The CIF sensor type 1 exposure setting got clamped at 300, as settings below 300 do not work well (and do work for the other sensors). This patch scales the 0-4095 range to 300-4095 instead of ignoring changes between 300, avoiding have a part of the control range where nothing happens. This is esp. important for software autogain as done by libv4l. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13141): gspca_sq905c: once one frame is discarded it keeps ↵Hans de Goede
discarding all frames While checking all gspca sub drivers pkt_scan functions for a bug I found in 1 of them (and after checking also in another), I noticed a bug in the gspca_sq905c work queue function, once it has decided to start discarding a frame because the application is not reading fast enough (and thus returning buffers to fill fast enough), it never stops discarding. This patch fixes this by simply completely removing the "discarding" variable, if we need to discard the current frame because there is no buffer to store it, the "frame" pointer will be NULL, so that is all we need to check. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13140): gspca_jeilinj: once one frame is discarded it keeps ↵Hans de Goede
discarding all frames While checking all gspca sub drivers pkt_scan functions for a bug I found in 1 of them (and after checking also in another), I noticed a bug in the gspca_jeilinj work queue function, once it has decided to start discard a frame because the application is not reading fast enough (and thus returning buffers to fill fast enough), it never stops discarding. This patch fixes this by simply completely removing the "discarding" variable, if we need to discard the current frame because there is no buffer to store it, the "frame" pointer will be NULL, so that is all we need to check. I've also moved the gspca_get_i_frame() call and the writing of the jpg header to the buffer to after the first usb_bulk_msg() call, as we don't need it before that, and that will give the app slightly more time to queue a buffer for us to fill. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13139): gspca_mr97310a: Improve VGA sensor type detectionTheodore Kilgore
Improve (and also simplify :) gspca_mr97310a: VGA sensor type detection. As it was still failing on some machines (not with some cams, but on some machines interesting enough). Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13138): gspca_sq905: cleanup sq905_dostreamHans de Goede
-Remove use of unneeded discarding variable -Cleanup locking to only take usb_lock around access to the control endpoint, by no longer taking the lock around the bulk transfer (which takes most of the time) we can remove the msleep(1) which was needed to give the gspca core a chance to grab the usb_lock to signal us to stop. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13137): gspca_mr97310a: Add controls for vga cams with sensor type 0Theodore Kilgore
This patch adds controls for vga cams with sensor type 0, in order to correctly report the present controls, the probing of the sensor type has been moved from sd_start to sd_config, since this made the sensor type probing unreliable the detection method was changed. Note this requires the camera to enter streaming mode, so sd_config now briefly makes the camera stream. Signed-off-by: Theodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13135): Add support for TeVii remotesIgor M. Liplianin
The patch brings infrared remote support for some cx88 based cards. Such as TeVii S460,S420. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13134): Add support for TBS-likes remotesIgor M. Liplianin
The patch brings infrared remote support for some cx88 based cards. Such as: TeVii S460,S420; Omicom SS4; SatTrade ST4200; TBS 8920,8910; Prof 7300,6200. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13130): soc-camera: add a new driver for the RJ54N1CB0C camera ↵Guennadi Liakhovetski
sensor from Sharp This adds an soc-camera / v4l2-subdev driver for the RJ54N1CB0C CMOS camera sensor from Sharp. The sensor is very picky about initialisation and configuration sequences. The driver limits artificially maximum window size by 800x600, although the sensor supports 1600x1200. Sizes above 800x600 don't seem to work correctly, besides, examples from the system integrator use sizes above 640x480 only for still photography. Unfortunately, I had to use "magic" register-value pairs for undocumented and "reserved" registers. This version of the driver also omits some functionality, like cropping, which hasn't been sufficiently tested yet and will be added later. create mode 100644 drivers/media/video/rj54n1cb0c.c Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13128): sh_mobile_ceu_camera: add VBP error supportKuninori Morimoto
If CEU driver can not receive data from camera, CETCR has VBP error state. Then, CEU is stopped and cure operation is needed. This patch add VBP error cure operation. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13127): sh_mobile_ceu: add soft reset functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13121): gspca - pac7311: add comment about JPEG headerMarton Nemeth
Add comment about the meaning of the fixed JPEG header bytes used to create each image. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13120): gspca - pac7311: remove redundant register page switchingMarton Nemeth
Remove redundant register page switching to page 0 when changing the color control. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13119): gspca - pac7311: remove magic value for USB_BUF_SZMarton Nemeth
The length check in reg_w_var() function is because the buffer contents is copied to gspca_dev->usb_buf which has the size of USB_BUF_SZ bytes as defined in drivers/media/video/gspca/gspca.h. Replace the number with symbol for better readability and maintainability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13118): gspca - pac7311: remove magic values for END_OF_SEQUENCE ↵Marton Nemeth
and LOAD_PAGE. Change the magic values 0, 254 and 255 to END_OF_SEQUENCE, LOAD_PAGE4 and LOAD_PAGE3 respectively for better source code readability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13117): gspca - pac7311: remove magic value for SKIP.Marton Nemeth
Change the magic value 0xaa to SKIP for better understandability. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13116): gspca - ov519: Webcam 041e:4067 added.Rafal Milecki
Signed-off-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13115): gspca - main: More information messages.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13114): gspca - zc3xx.c: Bad init sequences of sensor cs2102.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13104): cx23885: define a dvb frontend ioctl override functionMichael Krufky
override set_frontend to allow rf input path switching on the HVR1275 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13103): create a standard method for dvb adapter drivers to ↵Michael Krufky
override frontend ioctls Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13100): cx23885: Add IR input keypress handling and enable for the ↵Andy Walls
HVR-1850 This changes adds IR Rx keypress input event handling to the CX23885 module. This change specifically only adds input handling for IR devices implemented as v4l2_subdevices, using only the pulse width mode (for now), and only with RC-5 remotes. The V4L-DVB infrastructure is missing too much to support RC-6 mode 6A as used in many media center remotes. The grey Hauppauge RC-5 remote and HVR-1850 IR receiver work now. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13098): cx23885: Add integrated IR subdevice interrupt and ↵Andy Walls
notification handling Add integrated IR subdevice interrupt and notification handling. This is in preparation of input keypress handling changes for the cx23885 module. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13097): cx23885: Complete CX23888 IR subdev implementation for Rx & ↵Andy Walls
almost for Tx This change completes the v4l2_subdev implementation for IR receive for the IR controller built into the CX23888. This changes almost completes the IR transmit side also, but doesn't. Instead notes in the comments describe what needs to be done for IR Tx to work in the subdevice implementation. The current Tx behavior is skeletal and benign. If left alone, it does nothing. It will only ever generate a Tx interrupt on Tx init by a caller or when the tx_write() method is called. The ISR, when called, will then disable the Tx FIFO service interrupt. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13092): cx25840: Improvements to the cx23885/7/8 chip detection ↵Steven Toth
mechanism. The prior mechanism wasn't reliable with the cx23887. This new mechanism tests correctly against cx23885, 7 and 8 based products. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13091): cx23885: Enable HVR-1850 CX23888 A/V core to get VID_CLK ↵Andy Walls
running for IR For the IR controller on the CX23888 to work for the HVR-1850 and in general, the A/V core must be initialized to get the VID_CLK going. The VID_CLK is the timing reference for the CX23888's integrated IR controller. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13090): cx25840: Init PLLs properly for CX2388[578] A/V coresAndy Walls
The SYS and AUX PLLs need to be initialized to different values based on the chip: CX23885, CX23887, CX23888, as each uses a different crystal frequency: 28.6363 MHz, 25.0 MHz, 50.0 MHz. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13089): cx25840: Separate set_audclk_freq functionality for the ↵Andy Walls
different chips Separate out the set_audclk_freq() function into separate functions for the four families of cores. These cores all use slightly different sample clock schemes and may be assuming slightly (+/- 3 Hz) different reference frequencies. The code resuse was not worth the maintenance and testing headache of have all chips use the same function peppered with conditional logic. Added comments on how PLL and SRC parameters values are computed. Fixed a few bugs related to the shared code having a large number of conditional statements. Noted inconsistencies with FIXME in the comments. This is done in preparation for getting the CX2388[578] PLL/clock setting logic cleaned up for CX23888 analog video and IR (which need the VID PLL set right). Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13088): cx25840: Convert chip/core family checks to static inline ↵Andy Walls
functions Change logic to check for various chip or core families to inline functions. Checks for specific chips should be made against the state->id field now. This is in preparation for chip/core specific code for setting up PLLs for the CX2388[578] family of cores, that all run with different crystal frequencies. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13087): cx25840: Improve detection of CX2388[578] A/V coresAndy Walls
Add improved logic to detect the exact CX2388[578] A/V core that is being probed. Also cleaned up detection and logging for CX2310[12], CX2583[67], and CX2584[0123] cores and chips. Also added code to identify a CX2388[578] A/V decoder core that is not responding properly. Typical symptoms include registers 0x00-0xff responding properly but all other registers returning the same value (0x13 and 0x5 have been observed). This state will cause proper detection of '885 vs. '887 vs. '888 to fail and the chip won't respond to get configured properly anyway. I have no method of reseting the core to a working state at this time; but I didn't try too hard to work one out either. The problem likely only occurs in development. I suspect configuring the SYS PLL VCO to oscillate too slowly (286.3 MHz?) before post divide may be the root cause, when encountered. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13086): cx23885: Add skeleton v4l2_subdev for the CX23888 ↵Andy Walls
integrated IR controller This change adds a skeletal implementation of a v4l2_subdevice to provide encapsulation and abstraction of the CX23888's integrated consumer infrared controller. This change also instantiates the cx23888_ir subdev for the HVR-1850 which has IR hardware physically wired up to a CX23888. The cx23888_ir subdev code is being written with long-term objectives to: 1. port it to the cx25840 module for the CX2584x, CX2583x, CX23885, & CX231xx IR controllers 2. possibly port it to the cx18 module for the CX23418 IR controller 3. have the IR subdevice accessed abstractly in the cx23885 module, so the driver can ignore the difference between the CX23885 and CX23888. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13085): cx23885: Fix support for v4l2-dbg access to CX2388[578] and ↵Andy Walls
CX23417 regs This changes corrects the ioctl() operations for both the CX2388[578] analog video and MPEG video device nodes to properly and consistently support VIDIOC_G_CHIP_IDENT, VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER ioctl()s. This caused some ioctl() support routines to be broken out into a separate source file. Now v4l2-dbg can be used to manipulate CX2388[578] and CX23417 registers including the CX2388[57] functions handled by the cx25840 module. This was done in anticipation of developing a new v4l2_subdev for the integrated IR controller of the CX23888. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13082): em28xx: remove "not validated" status from Terratec Cinergy ↵Devin Heitmueller
T XS (005e) The board support has been validated by the user, so get rid of the warning that shows up on board load. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13081): saa7134: use the #define for the xc5000 radio_input fieldDevin Heitmueller
Dmitri's patch for the Behold X7 didn't use the #define I had setup for XC5000_RADIO_FM1, so cut over to using that instead of "1". Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13080): saa7134: add support for the digital side of the Behold X7Beholder Intl. Ltd. Dmitry Belimov
Add support for the digital side of the Behold X7 Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13078): em28xx: fix support for Terratec Cinergy T XS (005e)Uroš Vampl
Make analog audio, dvb and the remote work on a Terratec Cinergy Hybrid XS (em2882). Note by djh: Thanks go out fo Andrej Suligoi for his contribution in providing and testing pretty much the exact same patch as provided by Uros. Between the two of them, they got all the core functionality working for the device. Cc: Andrej Suligoi <suligoi@gmail.com> Signed-off-by: Uroš Vampl <mobile.leecher@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13077): em28xx: Add support for new variant of KWorld 2800dDevin Heitmueller
Seems that the reference design used for the KWorld 2800d switched from the em2860 to em2862, so we need to add the new USB id (and the i2c hash remains so all we need is the default em2862 id. Thanks to Ian Young for reporting the issue and testing the fix. Cc: Ian Young <ian@duffrecords.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13040): V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision ↵Marek Vasut
OV9640 sensor Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>