summaryrefslogtreecommitdiff
path: root/drivers/media/video/tuner-core.c
AgeCommit message (Collapse)Author
2012-03-08[media] convert drivers/media/* to use module_i2c_driver()Axel Lin
This patch converts the drivers in drivers/media/* to use the module_i2_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Heungjun Kim <riverful.kim@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Andrew Chew <achew@nvidia.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Johannes Obermaier <johannes.obermaier@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] xc5000: drivers should specify chip revision rather than firmwareMichael Krufky
Specify chip revision at attach time rather than a firmware image. This is a better way to ensure that the correct firmware is loaded for the correct revision of the chip. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14[media] tuner: add support for Xceive XC5000CMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-06[media] cx88: Fix radio support for Leadtek DTV2000H JMiroslav Slugen
Leadtek DTV2000H J has Philips a FMD1216MEX tuner, and not a FMD1216ME. Signed-off-by: Miroslav Slugen <thunder.mmm@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] xc4000: removed card_typeistvan_v@mailbox.hu
Removed the use of 'card_type' from the tuner configuration structure, and replaced it with separate parameters to set board-specific configuration. Signed-off-by: Istvan Varga <istvan_v@mailbox.hu> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] dib0700: add initial code for PCTV 340e by Davide FerriDavide Ferri
This is initial code written by Davide Ferri for the PCTV 340e, including a new xc4000 driver. I am checking in all the code unmodified, and making no assertions about its quality (other than confirming it compiles). [mchehab@redhat.com: rebased on the top of the current tree] Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Davide Ferri <davidef1986@gmail.com> Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-13[media] tuner-core: fix a 2.6.39 regression with mt20xxMauro Carvalho Chehab
As Simon reported, digital TV broke with mt20xx tuner due to commit ad020dc2fe9039628cf6cef42cd1b76531ee8411. The mt20xx tuner passes V4L2_TUNER_DIGITAL_TV to tuner core. However, the check_mode code now doesn't handle it well. Change the logic there to avoid the breakage, and fix a test for analog-only at g_tuner. Reported-by: Simon Arlott <simon@fire.lp0.eu> Tested-by: Simon Arlott <simon@fire.lp0.eu> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core.c: don't change type field in g_tuner or g_frequencyHans Verkuil
The tuner core should not silently change the type field in g_tuner and g_frequency. If the tuner is in a different mode than the one that was requested, then just fill in what you can and don't attempt to read afc, signal or rxsubchans values. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: power up tuner when called with s_power(1)Hans Verkuil
Drivers must be able to rely on s_power to power up subdevices. Note that at this moment no driver attempts to power up tuners. This probably isn't surprising since s_power(1) was never implemented in tuner-core.c until now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: simplify the standard fixupHans Verkuil
Get rid of a number of unnecessary tuner_dbg messages by simplifying the std fixup function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core/v4l2-subdev: document that the type field has to be filled inHans Verkuil
The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type field is filled in. Document this. The tuner-core doc is based on a patch from Mauro Carvalho Chehab <mchehab@redhat.com>. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: fix tuner_resume: use t->mode instead of t->typeHans Verkuil
set_mode is called with t->type, which is the tuner type. Instead, use t->mode which is the actual tuner mode (i.e. radio vs tv). Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07[media] tuner-core: fix s_std and s_tunerHans Verkuil
Both s_std and s_tuner are broken because set_mode_freq is called before the new std (for s_std) and audmode (for s_tuner) are set. This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner first calls set_mode, and if that returns 0 (i.e. the mode is supported) then they set t->std/t->audmode and call set_freq. This fixes a bug where changing std or audmode would actually change it to the previous value. Discovered while testing analog TV standards for cx18 with a tda18271 tuner. Cc: stable@kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Don't touch at standby during tuner_lookupMauro Carvalho Chehab
It makes no sense that tuner_lookup would touch at the standby state. Remove it. Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Rearrange some functions to better documentMauro Carvalho Chehab
Group a few functions together and add/fix comments for each block of the driver. This is just a cleanup patch meant to improve driver readability. No functional changes in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Improve function documentationMauro Carvalho Chehab
This driver is complex, and used by everyone. Better to have it properly documented. No functional changes are done in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: remove usage of DIGITAL_TVMauro Carvalho Chehab
tuner-core has no business to do with digital TV. So, don't use T_DIGITAL_TV on it, as it has no code to distinguish between them, and nobody fills T_DIGITAL_TV right. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Fix a few comments on itMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: dead code removalMauro Carvalho Chehab
Remove the now obsolete set_freq. Also merge set_addr and set_type_addr. In the past, it used to have two different setup calls, one to set just the tuner type to any tuner found, and another to set the type only if the address matches. Those two internal calls were grouped together, but the functions weren't merged, making the code uglier. No functional changes are done in this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Don't use a static var for xc5000_cfgMauro Carvalho Chehab
A static var is evil, especially if a device has two boards with xc5000. Instead, just like the other drivers, use stack to store its config during setup. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: CodingStyle cleanupsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: do the right thing for suspend/resumeMauro Carvalho Chehab
Power down tuners at suspend. At resume, if the tuner is in standby, calls set_mode, that will turn it on and set the latest frequencies. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Better implement standby modeMauro Carvalho Chehab
In the past, T_STANDBY were used on devices with a separate radio tuner to mark a tuner that were disabled. With the time, it got newer meanings. Also, due to a bug at the logic, the driver might incorrectly return T_STANDBY to userspace. So, instead of keeping the abuse, just use a boolean for storing such information. We can't remove T_STANDBY yet, as this is used on two other drivers. A latter patch will address its usage outside tuner-core. Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Some cleanups at check_mode/set_modeMauro Carvalho Chehab
Properly document those functions and do some cleanups around that. There's just one behavior change on this patchset: it will now restore TV frequency when changing from radio to TV mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Reorganize the functions internallyMauro Carvalho Chehab
This is a big patch with no functional changes. It just rearranges everything inside the driver, and prepares to break TV and Radio into two separate fops groups. Currently, it has an heuristics logic to determine if the call came from radio or video. However, the caller driver knows for sure, so tuner-core shouldn't try to guess it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: move some messages to the proper placeMauro Carvalho Chehab
Move the frequency set debug printk's to the code that actually are changing it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: remove the legacy is_stereo() callMauro Carvalho Chehab
Nobody is using this legacy call. Just remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-21[media] tuner-core: Remove V4L1/V4L2 API switchMauro Carvalho Chehab
V4L1 was removed. So, the code there is just dead code. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] tda18271: allow restricting max out to 4 bytesMauro Carvalho Chehab
By default, tda18271 tries to optimize I2C bus by updating all registers at the same time. Unfortunately, some devices doesn't support it. The current logic has a problem when small_i2c is equal to 8, since there are some transfers using 11 + 1 bytes. Fix the problem by enforcing the max size at the right place, and allows reducing it to max = 3 + 1. Acked-by: Michael Krufky <mkrufky@kernellabs.com> Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] Use smaller i2c transaction size with 18271 tunerDevin Heitmueller
Configure the tda18271 to use a smaller transaction size by default, which works around some sort of i2c bug in the Polaris driver (which needs to be debugged). This should be safe for other boards (being in tuner-core means it will be enabled by default), although testing needs to be done. Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: saa7146/tuner: remove mxb hackHans Verkuil
Remove a hack in the tuner code for the mxb board. This hack is no longer needed since the tuner is now probed on its correct address as specified by the mxb driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: tuner: remove obsolete v4l2-i2c-drv.h headerHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13964): tuner-core, fix memory leakJiri Slaby
Stanse found a memory leak in tuner_probe. It is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13247): tuner-core: dont force every tuner to set frequency at startupMichael Krufky
Setting the tuner frequency at the same time as initializing the other devices on the i2c bus can cause problems on devices that require firmware download or extensive calibration proceduces during initialization. This change allows us to prevent the tune at startup for devices that perform better without it. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13241): Cleanup redundant tests on unsignedRoel Kluin
The variables are unsigned so the test `>= 0' is always true, the `< 0' test always fails. In these cases the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_powerLaurent Pinchart
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice power state from the core. This use case is already partially covered by the tuner s_standby operation, but no way to explicitly come back from the standby state is available. Rename the tuner s_standby operation to core s_power, and fix tuner drivers accordingly. The tuner core will call s_power(0) instead of s_standby(). No explicit call to s_power(1) is required for tuners as they are supposed to wake up from standby automatically. [mchehab@redhat.com: CodingStyle fix] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12964): tuner-core: add support for NXP TDA18271 without TDA829X demodMichael Krufky
Add support for NXP TDA18271 as a standalone tuner, allowing the use of analog demodulators other than the Philips/NXP TDA829x. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12483): Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11926): tuner-core: fix warning introduced when cleaning up xc5000 ↵Devin Heitmueller
init routine This patch removes some remaining dead code. Warning showed up in Hans Verkuil's daily report after I committed hg changeset 7f2eea75118b. Thanks to Michael Krufky for bringing the warning to my attention. Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11799): xc5000: don't load firmware until a tuning request is madeDevin Heitmueller
Defer loading of the xc5000 firmware until it is actually needed. This helps on distros that have hald, which results in the device not being available for use for around ten seconds in cases where the i2c bus is slow (such as the HVR-950Q). Also, the firmware load isn't really useful since we immediately put the device to sleep afterward, which means a firmware reload will be required anyway. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11670): tuner: remove tuner_i2c_address_checkHans Verkuil
Support for tuners with i2c addresses >= 0x65 is dropped since no tuners with addresses in the range 0x65-0x6f have been found. This patch removes addresses 0x65-0x6f from the list of tuner probe addresses, it removes the kernel warning that warned if addresses in this range appeared, and it removed a hack for the cx88 that is no longer needed now that the tuner address range is reduced. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11372): v4l2: use old-style i2c API for kernels < 2.6.26 instead of ↵Hans Verkuil
< 2.6.22 Originally the intention was to switch to the new style i2c API starting with the introduction of the API in 2.6.22. However, the i2c_new_probed_device() function has a lethal bug that wasn't fixed until 2.6.25. Or more accurately, it was only fixed in the stable series of 2.6.25 and 2.6.26. Given the fact that the new i2c API also changed starting with 2.6.26 (the addition of i2c_device_id), it is easiest to switch APIs starting with 2.6.26. This patch updates all the legacy code accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11371): v4l2: remove legacy fields in v4l2-i2c-drv.h.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.Hans Verkuil
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11364): tuner: remove i2c legacy code.Hans Verkuil
All drivers that use the tuner module now use v4l2_subdev, so we can remove the legacy code from this module. Note that TUNER_SET_CONFIG is still called by tuner-simple.c, so we have to handle it via a .command callback. There must be a better way to do this, but for now this will work. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11312): tuner: remove V4L1 code from this driver.Hans Verkuil
No i2c modules are called with the V4L1 API anymore, so this can be removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c driversHans Verkuil
Replace 'VIDIOC_' references in v4l i2c drivers by their new v4l2_subdev callback names. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11251): tuner: prevent invalid initialization of t->config in set_typeMichael Krufky
Drivers that don't set "config" directly in the set_type function will end up with an invalid configuration value. Check that the value is sane, otherwise initialize to 0. Thanks to James Edward Geiger & Steven Toth for reporting this bug. Cc: Steven Toth <stoth@linuxtv.org> Cc: James Edward Geiger <james.e.geiger@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11059): xc5000: fix bug for hybrid xc5000 devices with IF other ↵Devin Heitmueller
than 5380 The xc5000 driver has a bug where the IF is always set to whatever the first caller to dvb_attach() provides. This fails when the device requires an IF other than 5380 and the analog driver is loaded first through tuner-core (which always supplies the hard-coded value of 5380). Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 03:43:27 +0000