summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)Author
2015-02-03[media] lmedm04: add read snr, signal strength and ber call backsMalcolm Priestley
This allows calling the original functions providing the streaming is off. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Create frontend call back for read statusMalcolm Priestley
Create dm04_read_status to check lock through either interrupt values or directly by the call back. When the device is not streaming the frontends original call back is used. When streaming has started it turns off I2C messaging by setting st->i2c_talk_onoff to zero. I2C can only be turn on again by one of the other allowed frontend calls. All old code is removed from lme2510_msg and this function only needs to set st->i2c_talk_onoff to 1. The lock status is saved and when the frondend is locked is maintained by lme2510_int_response who will now just kill the lock. The call back for rs2000 tuner is nologer required. All frontend types have been tested. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocksMalcolm Priestley
Create call backs dm04_read_signal_strength, dm04_read_snr and move dm04_read_ber and dm04_read_ucblocks for all frontends Removing the I2C filtering from lme2510_msg and the old rs2000 callbacks. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in ↵Malcolm Priestley
interrupt urb A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK but the endpoint otheriwse functions as interrupt. Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Increase Interupt due time to 200 msecMalcolm Priestley
Ocassionally the device fails to report back an interrupt urb status which results in false no lock trigger on the RS2000 demodulator. Increase time from 60 msecs to 200 msecs. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: properly initialize pdataMauro Carvalho Chehab
As complained by smatch: drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code). Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: correct reg access routine name prefixesAntti Palosaari
Use rtl28xxu_ prefix for all register access routine names. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: merge rtl2831u and rtl2832u propertiesAntti Palosaari
As all the callbacks are already same we could merge device properties struct too and save space. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: merge chip type specific all callbacksAntti Palosaari
Merge all chip type specific prefixed (rtl2831u_ and rtl2832u_) callback to top level callback prefixed as rtl28xxu_. rtl2831u_foo() => rtl28xxu_foo() rtl2832u_foo() => rtl28xxu_foo() Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: add heuristic to detect chip typeAntti Palosaari
Detect automatically whether chip is old RTL2831U or newer RTL2832U/RTL2832P. Detection is based I2C command that is found only from newer RTL2832U models. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: move usb buffers to stateAntti Palosaari
Buffer needed for USB control message is small so move it to state and get rid of alloc/free used for each control message. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: fix loggingAntti Palosaari
Pass correct device pointer to dev_* logging in order to print module name and bus id correctly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: rename state variable 'priv' to 'dev'Antti Palosaari
I prefer dev over priv and I want keep all my drivers in line with that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: do not refcount rtl2832_sdr moduleAntti Palosaari
This driver, rtl28xxu, offers frontend service for rtl2832_sdr module, thus we are producer and rtl2832_sdr module is consumer. Due to that, reference counting should be done in way rtl2832_sdr takes refrence to rtl28xxu. Remove wrong refcount. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: simplify FE callback handlingAntti Palosaari
Logic is so simple that there is no idea to separate tuner selection to own function, instead do it in a callback and get rid of one function. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: fix DVB FE callbackAntti Palosaari
DVB FE callback functionality went broken after I moved tuners to demod muxed I2C adapter. That happens because driver state was carried by I2C adapter and when mux is used there is one adapter more in a chain. USB adapter <-> I2C adapter <-> muxed I2C adapter Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: use master I2C adapter for slave demodsAntti Palosaari
Both mn88472 and mn88473 slave demods are connected to master I2C bus, not the bus behind master demod I2C gate like tuners. Use correct bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: switch SDR module to platform driverAntti Palosaari
RTL2832 SDR module implements kernel platform driver. Change old binding to that one. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: add support for RTL2832U/RTL2832 PID filterAntti Palosaari
RTL2832 demod integrated into RTL2832U has PID filter. PID filtering is provided by rtl2832 demod driver. Add support for it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: use demod mux I2C adapter for every tunerAntti Palosaari
Tuners are connected to demod I2C adapter. Use that muxed adapter for each tuner. That allows us to get rid of hackish FE gate control solution. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: use platform data config for rtl2832 demodAntti Palosaari
Use platform data configuration for rtl2832 demod driver. Old configuration are still left as it is used for rtl2832_sdr driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: use rtl2832 demod callbacks accessing its resourcesAntti Palosaari
Switch demod resource use from exported symbols to callbacks its provides. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] rtl28xxu: add support for RTL2831U/RTL2830 PID filterAntti Palosaari
RTL2830 demod integrated to RTL2831U has PID filter. PID filtering is provided by rtl2830 demod driver. Add support for it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] rtl28xxu: use I2C binding for RTL2830 demod driverAntti Palosaari
rtl2830 driver supports now I2C model too. Start using it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] dvb-usb-v2: add pointer to 'struct usb_interface' for driver usageAntti Palosaari
Top level pointer on USB probe is struct usb_interface *. Add that pointer to struct dvb_usb_device that drivers could use it, for dev_* logging and more. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] media: au0828 - convert to use videobuf2Shuah Khan
Convert au0828 to use videobuf2. Tested with NTSC. Tested video and vbi devices with xawtv, tvtime, and vlc. Ran v4l2-compliance to ensure there are no failures. Video compliance test results summary: Total: 75, Succeeded: 75, Failed: 0, Warnings: 18 Vbi compliance test results summary: Total: 75, Succeeded: 75, Failed: 0, Warnings: 0 Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] media: fix au0828 compile error from au0828_boards initializationShuah Khan
au0828 picked up UNSET from videobuf-core.h and fails to compile if videobuf-core.h isn't included. Change it to use -1U instead to fix the problem. drivers/media/usb/au0828/au0828-cards.c:47:17: error: ‘UNSET’ undeclared here (not in a function) .tuner_type = UNSET, Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] media: fix au0828_analog_register() to not free au0828_devShuah Khan
au0828_analog_register() frees au0828_dev when it fails to locate isoc endpoint. au0828_usb_probe() continues with dvb and rc probe and registration assuming dev is still valid. When au0828_analog_register() fails to locate isoc endpoint, it should return without free'ing au0828_dev. Otherwise, the probe will fail as dev is null when au0828_dvb_register() is called. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] siano: fix Kconfig dependenciesArnd Bergmann
The USB and MMC front-ends to the siano driver both only make sense when combined with the SMS_SIANO_MDTV driver. That driver already requires RC_CORE to not be a module, so we also need to add that dependency here. drivers/built-in.o: In function `smssdio_remove': :(.text+0x155bd8): undefined reference to `smscore_putbuffer' :(.text+0x155bdc): undefined reference to `smscore_unregister_device' drivers/built-in.o: In function `smssdio_interrupt': :(.text+0x155e4c): undefined reference to `smsendian_handle_rx_message' :(.text+0x155e50): undefined reference to `smscore_onresponse' :(.text+0x155e54): undefined reference to `smscore_getbuffer' :(.text+0x155e58): undefined reference to `smscore_putbuffer' drivers/built-in.o: In function `smssdio_sendrequest': :(.text+0x155f20): undefined reference to `smsendian_handle_tx_message' drivers/built-in.o: In function `smssdio_probe': :(.text+0x15610c): undefined reference to `sms_get_board' :(.text+0x156114): undefined reference to `smscore_register_device' :(.text+0x156118): undefined reference to `smscore_set_board_id' :(.text+0x156128): undefined reference to `smscore_unregister_device' :(.text+0x156140): undefined reference to `smscore_start_device' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] pvrusb2: use msecs_to_jiffies for conversionNicholas Mc Guire
This is only an API consolidation and should make things more readable Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] cx231xx: don't use dev it not allocatedMauro Carvalho Chehab
changeset 5eeb3014827f added a fixup at the error check code. However, it introduced a new error: drivers/media/usb/cx231xx/cx231xx-cards.c:1586 cx231xx_usb_probe() error: we previously assumed 'dev' could be null (see line 1430) This happens when dev = kmalloc() fails. So, instead of relying on it to succeed, just change the parameter of clear_bit() from 'dev->devno' to 'nr'. Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] cx231xx: fix usbdev leak on failure paths in cx231xx_usb_probe()Alexey Khoroshilov
Commit b7085c086475 ("cx231xx: convert from pr_foo to dev_foo") moves usb_get_dev(interface_to_usbdev(interface)) to the beginning of cx231xx_usb_probe() to use udev->dev in dev_err(), but it does not make sure usbdev is put on all failure paths. Later dev_err(udev->dev) was replaced by dev_err(d). So the patch moves usb_get_dev() below (before the first use) and fixes another failure path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] gspca_vc032x: Fix wrong bytesperlineLuca Bonissi
I found a problem on vc032x gspca usb webcam subdriver: "bytesperline" property is wrong for YUYV and YVYU formats. With recent v4l-utils library (>=0.9.1), that uses "bytesperline" for pixel format conversion, the result is a wrong jerky image. Patch tested on my laptop (USB webcam Logitech Orbicam 046d:0892). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=91181 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] gspca: Fix underflow in vidioc_s_parm()Hans de Goede
"n" is a user controlled integer. The code here doesn't handle the case where "n" is negative and this causes a static checker warning. drivers/media/usb/gspca/gspca.c:1571 vidioc_s_parm() warn: no lower bound on 'n' parm.capture.readbuffers is unsigned, so make n unsigned too, fixing this. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] gspca: Add high-speed modes for PS3 Eye cameraJoe Howse
Add support in the PS3 Eye driver for QVGA capture at higher frame rates: 187, 150, and 137 FPS. This functionality is valuable because the PS3 Eye is popular for computer vision projects and no other camera in its price range supports such high frame rates. Correct a QVGA mode that was listed as 40 FPS. It is really 37 FPS (half of 75 FPS). Tests confirm that the nominal frame rates are achieved. Signed-off-by: Joe Howse <josephhowse@nummist.com> Tested-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] gspca_stv06xx: enable button found on some Quickcam Express variantAntonio Ospite
Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] pwc: fix WARN_ONHans Verkuil
If start_streaming fails, then the buffers must be given back to vb2 with state QUEUED, not ERROR. Otherwise a WARN_ON will be generated. In the disconnect it is pointless to call pwc_cleanup_queued_bufs() as stop_streaming() will be called anyway. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] gspca/touptek: Fix a few CodingStyle issuesMauro Carvalho Chehab
Checkpatch complained about a few issues, like FSF address. Also, multi-line comments are not following the Kernel CodingStyle. While not too late, let's fix those issues. Cc: John McMaster <johndmcmaster@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] gspca_touptek: Add support for ToupTek UCMOS series USB camerasJohn McMaster
Adds support for AmScope MU800 / ToupTek UCMOS08000KPB USB microscope camera. Signed-off-by: John McMaster <johndmcmaster@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] rtl28xxu: change module unregister orderAntti Palosaari
We must unregister frontend first and after that driver itself. That order went wrong after demod drivers were switched to kernel I2C drivers, causing crashes. Tested-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] rtl28xxu: switch rtl2832 demod attach to I2C bindingAntti Palosaari
As rtl2832 driver support now I2C binding we will switch to that one. Tested-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] uvcvideo: remove unnecessary version.h inclusionFabian Frederick
Based on versioncheck. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] uvcvideo: Remove extra commit on resume()Aviv Greenberg
The UVC spec is a bit vague wrt devices using bulk endpoints, specifically, how to signal to a device to start streaming. For devices using isoc endpoints, the sequence for start streaming is: 1) The host sends PROBE_CONTROL(SET_CUR) PROBE_CONTROL(GET_CUR) 2) Host selects desired config and calls COMMIT_CONTROL(SET_CUR) 3) Host selects an alt interface other then zero - e.g SELECT_ALTERNATE_INTERFACE(1) 4) The device starts streaming However for devices using bulk endpoints, there must be *no* alt interface other than setting zero. From the UVC spec: "A VideoStreaming interface containing a bulk endpoint for streaming shall support only alternate setting zero. Additional alternate settings containing bulk endpoints are not permitted in a device that is compliant with the Video Class specification." So for devices using bulk endpoints, step #3 above is irrelevant, and thus cannot be used as an indication for the device to start streaming. So in practice, such devices start streaming immediately after a COMMIT_CONTROL(SET_CUR). In the uvc resume() handler, an unsolicited commit is sent, which causes devices using bulk endpoints to start streaming unintentionally. This patch modifies resume() handler to send a commit only if streaming needs to be reestablished, i.e if the device was actually streaming before is was suspended. Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] usb: pvrusb2: pvrusb2-hdw: Remove unused functionRickard Strandqvist
Remove the function pvr2_hdw_cmd_powerdown() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] pvrusb2: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] usbvision: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> The semantic patch also changes the cast to long to a cast to unsigned long in the data initializer, as unsigned long is the type of the data field. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] s2255drv: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] au0828: Use setup_timerJulia Lawall
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -t.function = f; -t.data = d; -init_timer(&t); +setup_timer(&t,f,d); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27Merge tag 'v3.19-rc6' into patchworkMauro Carvalho Chehab
This is needed in order to get the media fixes applied on -rc6. Linux 3.19-rc6 * tag 'v3.19-rc6': (891 commits) Linux 3.19-rc6 dm: fix handling of multiple internal suspends hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro hwmon: (i5500_temp) Convert to module_pci_driver hwmon: (i5500_temp) Don't bind to disabled sensors hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets arm64: dts: add baud rate to Juno stdout-path Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface" dm cache: fix problematic dual use of a single migration count variable dm cache: share cache-metadata object across inactive and active DM tables of/unittest: Overlays with sub-devices tests KVM: x86: SYSENTER emulation is broken KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 arm64: dump: Fix implicit inclusion of definition for PCI_IOBASE x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" ... Conflicts: drivers/media/pci/cx23885/cx23885.h
2015-01-24Merge tag 'media/v3.19-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix some race conditions caused by a regression on videobuf2 - fix a interrupt release bug on cx23885 - fix support for Mygica T230 and HVR4400 - fix compilation breakage when USB is not selected on tlg2300 - fix capabilities report on ompa3isp, soc-camera, rcar_vin and pvrusb2 * tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Correctly set QUERYCAP capabilities [media] cx23885: fix free interrupt bug [media] pvrusb2: fix missing device_caps in querycap [media] vb2: fix vb2_thread_stop race conditions [media] rcar_vin: Update device_caps and capabilities in querycap [media] soc-camera: fix device capabilities in multiple camera host drivers [media] Fix Mygica T230 support [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry [media] tlg2300: Fix media dependencies
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 07:47:13 +0000