summaryrefslogtreecommitdiff
path: root/drivers/media/usb/usbtv
AgeCommit message (Collapse)Author
2021-04-28Merge tag 'media/v5.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - addition of a maintainer's profile for the media subsystem - addition of i.MX8 IP support - qcom/camss gained support for hardware version Titan 170 - new RC keymaps - Lots of other improvements, cleanups and bug fixes * tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits) media: coda: fix macroblocks count control usage media: rkisp1: params: fix wrong bits settings media: cedrus: Fix H265 status definitions media: meson-ge2d: fix rotation parameters media: v4l2-ctrls: fix reference to freed memory media: venus : hfi: add venus image info into smem media: venus: Fix internal buffer size calculations for v6. media: venus: helpers: keep max bandwidth when mbps exceeds the supported range media: venus: fix hw overload error log condition media: venus: core: correct firmware name for sm8250 media: venus: core,pm: fix potential infinite loop media: venus: core: Fix kerneldoc warnings media: gscpa/stv06xx: fix memory leak media: cx25821: remove unused including <linux/version.h> media: staging: media/meson: remove redundant dev_err call media: adv7842: support 1 block EDIDs, fix clearing EDID media: adv7842: configure all pads media: allegro: change kernel-doc comment blocks to normal comments media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init() media: i2c: rdamc21: Fix warning on u8 cast ...
2021-03-11media: usbtv: constify static structsRikard Falkeborn
Constify two static structs which are never modified to allow the compiler to put them in read-only memory. The only usage of norm_params is only read from it in usbtv_configure_for_norm(). Making it const shrinks the resulting ko-file with 300 bytes (tested with gcc 10). The only usage of usbtv_ioctl_ops is to put its address to the ioctl_ops field in the video_device struct. Making it const moves ~1kb to read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: usbtv: Fix deadlock on suspendMaxim Mikityanskiy
usbtv doesn't support power management, so on system suspend the .disconnect callback of the driver is called. The teardown sequence includes a call to snd_card_free. Its implementation waits until the refcount of the sound card device drops to zero, however, if its file is open, snd_card_file_add takes a reference, which can't be dropped during the suspend, because the userspace processes are already frozen at this point. snd_card_free waits for completion forever, leading to a hang on suspend. This commit fixes this deadlock condition by replacing snd_card_free with snd_card_free_when_closed, that doesn't wait until all references are released, allowing suspend to progress. Fixes: 63ddf68de52e ("[media] usbtv: add audio support") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08media: usbtv: Fix refcounting mixupOliver Neukum
The premature free in the error path is blocked by V4L refcounting, not USB refcounting. Thanks to Ben Hutchings for review. [v2] corrected attributions Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 50e704453553 ("media: usbtv: prevent double free in error case") CC: stable@vger.kernel.org Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-28media: media/usb: use vb2_video_unregister_device()Hans Verkuil
Use vb2_video_unregister_device() to automatically stop streaming at unregister time. This avoids the use of vb2_queue_release() which should not be called by drivers that set vdev->queue. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: media/usb: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil
'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: usbtv: fix control-message timeoutsJohan Hovold
The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on various user requests due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber") Fixes: c53a846c48f2 ("[media] usbtv: add video controls") Cc: stable <stable@vger.kernel.org> # 3.11 Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-13media: Drop superfluous ioctl PCM opsTakashi Iwai
PCM core deals the empty ioctl field now as default. Let's kill the redundant lines. Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com> Cc: Anton Sviridenko <anton@corp.bluecherry.net> Cc: Andrey Utkin <andrey.utkin@corp.bluecherry.net> Cc: Ismael Luceno <ismael@iodev.co.uk> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-12-13media: usbtv: Use managed buffer allocationTakashi Iwai
Clean up the driver with the new managed buffer allocation API. The hw_params and hw_free callbacks became superfluous and dropped. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-11media: solo6x10: Remove superfluous snd_dma_continuous_data()Takashi Iwai
The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22media: media/usb: don't set description in ENUM_FMTHans Verkuil
The V4L2 core sets the description for the driver in order to ensure consistent naming. So drop the strscpy of the description in drivers. Also remove any description strings in driver-internal structures since those are no longer needed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: media/usb: set device_caps in struct video_deviceHans Verkuil
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. But this only really works if all drivers use this, so convert all usb drivers in this patch. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-20media: Kconfig files: use the right help coding styleMauro Carvalho Chehab
Checkpatch wants to use 'help' instead of '---help---': WARNING: prefer 'help' over '---help---' for new help texts Let's change it globally at the media subsystem, as otherwise people would keep using the old way. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: usbtv: use irqsave() in USB's complete callbackSebastian Andrzej Siewior
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-25media: usbtv: Implement wait_prepare and wait_finishEzequiel Garcia
This driver is currently specifying a vb2_queue lock, which means it straightforward to implement wait_prepare and wait_finish. Having these callbacks releases the queue lock while blocking, which improves latency by allowing for example streamoff or qbuf operations while waiting in dqbuf. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: usbtv: Use the constant for supported standardsHugo Grostabussiat
Use the USBTV_TV_STD define instead of repeating ourselves. Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: usbtv: Enforce standard for color decodingHugo Grostabussiat
Depending on the chosen standard, configure the decoder to use the appropriate color encoding standard (PAL-like, NTSC-like or SECAM). Until now, the decoder was not configured for a specific color standard, making it autodetect the color encoding. While this may sound fine, it potentially causes the wrong image tuning parameters to be applied (e.g. tuning parameters for NTSC are applied to a PAL source), and may confuse users about what the actual standard is in use. This commit explicitly configures the color standard the decoder will use, making it visually obvious if a wrong standard was chosen. Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: usbtv: Keep norm parameter specificHugo Grostabussiat
The user-supplied norm value gets overwritten by the generic .norm member from the norm_params. That way, we lose the specific norm the user may want to set. For instance, if the user specifies V4L2_STD_PAL_60, the value actually used will be V4L2_STD_525_60, which in the end will be as if the user had specified V4L2_STD_NTSC, since this is always the first bitfield we match the norm value against before configuring the hardware. The norm_params array is only there to match a norm with an output resolution. The norm value itself should not be changed. Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: usbtv: Use V4L2 defines to select capture resolutionHugo Grostabussiat
Make use of the V4L2_STD_525_60 and V4L2_STD_625_50 defines to determine the vertical resolution to use when capturing. V4L2_STD_525_60 (resp. V4L2_STD_625_50) is the set of standards using 525 (resp. 625) lines per frame, independently of the color encoding. Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: usbtv: Add SECAM supportHugo Grostabussiat
Add support for the SECAM norm, using the "AVSECAM" decoder configuration sequence found in Windows driver's .INF file. For reference, the "AVSECAM" sequence in the .INF file is: 0x04,0x73,0xDC,0x72,0xA2,0x90,0x35,0x01,0x30,0x04,0x08,0x2D,0x28,0x08, 0x02,0x69,0x16,0x35,0x21,0x16,0x36 Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: usbtv: Use same decoder sequence as Windows driverHugo Grostabussiat
Re-format the register {address, value} pairs so they follow the same order as the decoder configuration sequences in the Windows driver's .INF file. For instance, for PAL, the "AVPAL" sequence in the .INF file is: 0x04,0x68,0xD3,0x72,0xA2,0xB0,0x15,0x01,0x2C,0x10,0x20,0x2e,0x08,0x02, 0x02,0x59,0x16,0x35,0x17,0x16,0x36 Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-02-26media: usbtv: Add USB ID 1f71:3306 to the UTV007 driverIan Douglas Scott
Add support for a new USB ID in this driver. Signed-off-by: Ian Douglas Scott <ian@iandouglasscott.com> [hans.verkuil@cisco.com: add commit message] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: usbtv: prevent double free in error caseOliver Neukum
Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04media: fix usage of whitespaces and on indentationMauro Carvalho Chehab
On several places, whitespaces are being used for indentation, or even at the end of the line. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-27media: usbtv: add a new usbidIcenowy Zheng
A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: usbtv: fix brightness and contrast controlsAdam Sampson
Because the brightness and contrast controls share a register, usbtv_s_ctrl needs to read the existing values for both controls before inserting the new value. However, the code accidentally wrote to the registers (from an uninitialised stack array), rather than reading them. The user-visible effect of this was that adjusting the brightness would also set the contrast to a random value, and vice versa -- so it wasn't possible to correctly adjust the brightness of usbtv's video output. Tested with an "EasyDAY" UTV007 device. Fixes: c53a846c48f2 ("usbtv: add video controls") Signed-off-by: Adam Sampson <ats@offog.org> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: usb: usbtv: remove duplicate & operationJaejoong Kim
usb_endpoint_maxp() has an inline keyword and searches for bits[10:0] by & operation with 0x7ff. So, we can remove the duplicate & operation with 0x7ff. Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usbtv: make v4l2_file_operations constBhumika Goyal
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: usb: make snd_pcm_hardware constBhumika Goyal
Make these const as they are only used during a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: usb: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. 'drivers/media/usb/b2c2/flexcop-usb.c' Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-08[media] usbtv: add sharpness controlLubomir Rintel
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-16Merge tag 'media/v4.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Mediatek drivers: mtk-mdp and mtk-vcodec - some additions at the media documentation - the CEC core and drivers were promoted from staging to mainstream - some cleanups at the DVB core - the LIRC serial driver got promoted from staging to mainstream - added a driver for Renesas R-Car FDP1 driver - add DVBv5 statistics support to mn88473 driver - several fixes related to printk continuation lines - add support for HSV encoding formats - lots of other cleanups, fixups and driver improvements. * tag 'media/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (496 commits) [media] v4l: tvp5150: Add missing break in set control handler [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER [media] em28xx: don't store usb_device at struct em28xx [media] em28xx: use usb_interface for dev_foo() calls [media] em28xx: don't change the device's name [media] mn88472: fix chip id check on probe [media] mn88473: fix chip id check on probe [media] lirc: fix error paths in lirc_cdev_add() [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs [media] s5p-mfc: Rework clock handling [media] s5p-mfc: Don't keep clock prepared all the time [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code [media] s5p-mfc: Remove dead conditional code [media] s5p-mfc: Ensure that clock is disabled before turning power off [media] s5p-mfc: Remove special clock rate management [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES [media] vivid: Set color_enc on HSV formats [media] v4l2-tpg: Init hv_enc field with a valid value ...
2016-11-16[media] usbtv: don't do DMA on stackMauro Carvalho Chehab
As reported by smatch: drivers/media/usb/usbtv/usbtv-video.c:716 usbtv_s_ctrl() error: doing dma on the stack (data) drivers/media/usb/usbtv/usbtv-video.c:758 usbtv_s_ctrl() error: doing dma on the stack (data) We should not do it, as it won't work on Kernels 4.9 and upper. So, alloc a buffer for it. Fixes: c53a846c48f2 ("[media] usbtv: add video controls") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] usbtv: add video controlsLubomir Rintel
Brightness, Contrast, Hue and Color Saturation are supported. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-31media: usbtv: core: make use of new usb_endpoint_maxp_mult()Felipe Balbi
We have introduced a helper to calculate multiplier value from wMaxPacketSize. Start using it. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <linux-media@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-19[media] usb: constify vb2_ops structuresJulia Lawall
Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] usb: constify snd_pcm_ops structuresJulia Lawall
Check for snd_pcm_ops structures that are only stored in the ops field of a snd_soc_platform_driver structure or passed as the third argument to snd_pcm_set_ops. The corresponding field or parameter is declared const, so snd_pcm_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_pcm_ops i@p = { ... }; @ok1@ identifier r.i; struct snd_soc_platform_driver e; position p; @@ e.ops = &i@p; @ok2@ identifier r.i; expression e1, e2; position p; @@ snd_pcm_set_ops(e1, e2, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; struct snd_pcm_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_pcm_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12[media] media: usbtv: prevent access to free'd resourcesMatthew Leach
When disconnecting the usbtv device, the sound card is unregistered from ALSA and the snd member of the usbtv struct is set to NULL. If the usbtv snd_trigger work is running, this can cause a race condition where the kernel will attempt to access free'd resources, shown in [1]. This patch fixes the disconnection code by cancelling any snd_trigger work before unregistering the sound card from ALSA and checking that the snd member still exists in the work function. [1]: usb 3-1.2: USB disconnect, device number 6 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff81093850>] process_one_work+0x30/0x480 PGD 405bbf067 PUD 405bbe067 PMD 0 Call Trace: [<ffffffff81093ce8>] worker_thread+0x48/0x4e0 [<ffffffff81093ca0>] ? process_one_work+0x480/0x480 [<ffffffff81093ca0>] ? process_one_work+0x480/0x480 [<ffffffff81099998>] kthread+0xd8/0xf0 [<ffffffff815c73c2>] ret_from_fork+0x22/0x40 [<ffffffff810998c0>] ? kthread_worker_fn+0x170/0x170 ---[ end trace 0f3dac5c1a38e610 ]--- Signed-off-by: Matthew Leach <matthew@mattleach.net> Tested-by: Peter Sutton <foxxy@foxdogstudios.com> Cc: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08[media] usbtv: improve a commentLubomir Rintel
Patrick Keshishian improved the explanation of the protocol when porting the driver to OpenBSD. Given it's a reverse engineering one and there's no documetnation it might be helpful to whoever hacks on the driver. Signed-off-by: Patrick Keshishian <sidster@boxsoft.com> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08[media] usbtv: clarify the licensingLubomir Rintel
OpenBSD would like to reuse some code but consider the licensing not clear enough. Let's clarify it a bit so that it suits their conventions: 1.) Keep the "extra text" away from the copyright statement and the rights grant. 2.) Add the warranty disclaimer -- it should not be legally required, nevertheless the clause 1. of the rights grant refest to it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08[media] vb2: replace void *alloc_ctxs by struct device *alloc_devsHans Verkuil
Make this a proper typed array. Drop the old allocate context code since that is no longer used. Note that the memops functions now get a struct device pointer instead of the struct device ** that was there initially (actually a void pointer to a struct containing only a struct device pointer). This code is now a lot cleaner. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-02-01[media] usbtv: correctly handling failed allocationInsu Yun
Since kzalloc can be failed, if not properly handled, NULL dereference could be happened. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] usbtv: discard redundant video fieldsNikola Forró
There are many dropped fields with some sources, leading to many redundant fields without counterparts. When this redundant field is odd, a new frame is pushed containing this odd field interleaved with whatever was left in the buffer, causing video artifacts. Do not push a new frame after processing every odd field, but do it only after those which come after an even field. Signed-off-by: Nikola Forró <nikola.forro@gmail.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] vb2: drop v4l2_format argument from queue_setupHans Verkuil
The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Change queue_setup argumentJunghak Sung
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] media: videobuf2: Restructure vb2_bufferJunghak Sung
Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 05:32:34 +0000