| Age | Commit message (Collapse) | Author |
|---|
|
PX-BCUD has the following components:
USB interface: Empia EM28178
Demodulator: Toshiba TC90532 (works by code for TC90522)
Tuner: Next version of Sharp QM1D1C0042
em28xx_dvb_init(): add init code for PLEX PX-BCUD with calling
px_bcud_init() that does things like pin configuration.
qm1d1c0042_init(): support the next version of QM1D1C0042, change to
choose an appropriate array of initial registers by reading chip id.
[mchehab@osg.samsung.com: fold a fixup patch and fix checkpatch.pl
errors/warnings, where applicable]
Signed-off-by: Satoshi Nagahama <sattnag@aim.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Detect if firmware is running run-time and download / start it only
when needed. Detection is done by reading IF frequency value.
Garbage value is returned by firmware when it is not running,
otherwise correct value is returned.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
smatch complains about:
drivers/media/tuners/xc4000.c:1511 xc4000_get_signal() warn: '~value << 3' 524280 can't fit into 65535 'value'
Remove the bogus complain.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As this tuner doesn't use the usual subdev interface, we need
to register it manually.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We have to unlock before returning -ENOMEM.
Fixes: 8dfbcc4351a0 ('[media] xc2028: avoid use after free')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
si2157_remove was calling kfree(dev) with possibly still active
schedule_delayed_work(dev->stat_work). This caused kernel panics in
call_timer_fn e.g. after rmmod cx23885.
Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
According with:
https://www.silabs.com/Support%20Documents/TechnicalDocs/Si2157-short.pdf
The RF input frequency range of this demod is from 42MHz to 870 MHz.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
If struct xc2028_config is passed without a firmware name,
the following trouble may happen:
[11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[11009.907491] ==================================================================
[11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40
[11009.907992] Read of size 1 by task modprobe/28992
[11009.907994] =============================================================================
[11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected
[11009.907999] -----------------------------------------------------------------------------
[11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992
[11009.908012] ___slab_alloc+0x581/0x5b0
[11009.908014] __slab_alloc+0x51/0x90
[11009.908017] __kmalloc+0x27b/0x350
[11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd]
[11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60
[11009.908029] usb_submit_urb+0xb0e/0x1200
[11009.908032] usb_serial_generic_write_start+0xb6/0x4c0
[11009.908035] usb_serial_generic_write+0x92/0xc0
[11009.908039] usb_console_write+0x38a/0x560
[11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0
[11009.908051] console_unlock+0x40d/0x900
[11009.908056] vprintk_emit+0x4b4/0x830
[11009.908061] vprintk_default+0x1f/0x30
[11009.908064] printk+0x99/0xb5
[11009.908067] kasan_report_error+0x10a/0x550
[11009.908070] __asan_report_load1_noabort+0x43/0x50
[11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992
[11009.908077] __slab_free+0x2ec/0x460
[11009.908080] kfree+0x266/0x280
[11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028]
[11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908108] do_one_initcall+0x141/0x300
[11009.908111] do_init_module+0x1d0/0x5ad
[11009.908114] load_module+0x6666/0x9ba0
[11009.908117] SyS_finit_module+0x108/0x130
[11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080
[11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001
[11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(......
[11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j....
[11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43
[11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80
[11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280
[11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4
[11009.908158] Call Trace:
[11009.908162] [<ffffffff81932007>] dump_stack+0x4b/0x64
[11009.908165] [<ffffffff81556759>] print_trailer+0xf9/0x150
[11009.908168] [<ffffffff8155ccb4>] object_err+0x34/0x40
[11009.908171] [<ffffffff8155f260>] kasan_report_error+0x230/0x550
[11009.908175] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908179] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908182] [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50
[11009.908185] [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0
[11009.908189] [<ffffffff8194cea6>] ? strcmp+0x96/0xb0
[11009.908192] [<ffffffff8194cea6>] strcmp+0x96/0xb0
[11009.908196] [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028]
[11009.908200] [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908203] [<ffffffff8155ea78>] ? memset+0x28/0x30
[11009.908206] [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028]
[11009.908211] [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908215] [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb]
[11009.908219] [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb]
[11009.908222] [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x]
[11009.908226] [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x]
[11009.908230] [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10
[11009.908233] [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80
[11009.908238] [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908242] [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb]
[11009.908245] [<ffffffff8195222d>] ? string+0x14d/0x1f0
[11009.908249] [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0
[11009.908253] [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0
[11009.908257] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908260] [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0
[11009.908264] [<ffffffff812e9846>] ? __module_address+0xb6/0x360
[11009.908268] [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0
[11009.908271] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908275] [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290
[11009.908278] [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300
[11009.908282] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908285] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908289] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908292] [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10
[11009.908296] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908299] [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400
[11009.908302] [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300
[11009.908306] [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20
[11009.908309] [<ffffffff8159e708>] ? put_object+0x48/0x70
[11009.908314] [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908317] [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908320] [<ffffffffa0150000>] ? 0xffffffffa0150000
[11009.908324] [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908327] [<ffffffff810021b1>] do_one_initcall+0x141/0x300
[11009.908330] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[11009.908333] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908337] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908340] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908343] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908346] [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0
[11009.908350] [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad
[11009.908353] [<ffffffff812f2626>] load_module+0x6666/0x9ba0
[11009.908356] [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50
[11009.908361] [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb]
[11009.908366] [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20
[11009.908369] [<ffffffff815bc940>] ? open_exec+0x50/0x50
[11009.908374] [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0
[11009.908377] [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130
[11009.908379] [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0
[11009.908383] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14
[11009.908394] [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908396] Memory state around the buggy address:
[11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc
[11009.908405] ^
[11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908411] ==================================================================
In order to avoid it, let's set the cached value of the firmware
name to NULL after freeing it. While here, return an error if
the memory allocation fails.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
generic_set_freq()
The variable "rc" will be set to an appropriate value from a call of
the r820t_set_tv_standard() function.
Thus let us omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This issue was detected by using the Coccinelle software.
1. Let us return directly if a call of the regmap_write() function failed.
2. Delete the jump label "err" then.
3. Return zero as a constant at the end.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Extend the frequency range to cover Hong Kong's digital TV broadcasting;
RTHK TV uses 802MHz and is not covered now. Tested on my TV tuner card
"MyGica X8558 Pro".
Signed-off-by: Walter Cheuk <wwycheuk@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
A previous patch added a check if the firmware is too big, but it didn't
set the return error code with the right value.
[mchehab@osg.samsung.com: I ended by applying a v1 of Laura's patch, without
the proper return code. This patch contains the difference between v2 and v1 of
the Laura's "si2157: Bounds check firmware" patch]
Cc: stable@kernel.org
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Tested-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The get_state()/set_state and the corresponding data types
(struct tuner_state and enum tuner_param) are old DVB interfaces
that came from the DVBv3 time.
Nowadays, set_params() provide a better way to set the tuner
and demod parameters. So, no need to keep those legacy stuff,
as all drivers that were using it got converted.
With this patch, all kABI elements at dvb_frontend.h are now
documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
|
|
An spi_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When reading the firmware and sending commands, the length
must be bounds checked to avoid overrunning the size of the command
buffer and smashing the stack if the firmware is not in the
expected format. Add the proper check.
Cc: stable@kernel.org
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Make the TV tuners menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.
Without this, many drivers stay disabled during e.g. allmodconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
On alpha, gcc warns a log about signed/unsigned ballance, with
produces 3185 warnings. Ok, this is bogus, but it indicates that
the declaration at V4L2 side is not consistent with the one at
I2C.
With this trivial patch, the number of errors reduce to 2959
warnings. Still too much, but it is 7.1% less. So let's do it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We must return -ENODEV error on case probe() fails to detect chip.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement DVBv5 signal strength stats. Returns dBm.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Tested-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
.rangehigh = 2208000000L,
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/tuners/e4000.c:287:32: warning: constant 2208000000 is so big it is long long
drivers/media/tuners/e4000.c:287:32: warning: decimal constant 2208000000 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
.rangehigh = 2208000000,
^
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement V4L2 subdevice tuner and core ops. After that this driver
is hybrid driver implementing both V4L2 and DVB ops.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
* Rename device state from 's' to 'dev'.
* Move single include to driver private header.
* Change error handling type of each function to one I tend use
nowadays.
* Remove dummy register write from init. Even Windows driver does this
multiple times remove it as I have never seen any I2C errors.
* Define I2C client pointer for each function and use it.
* Do not clean tuner ops during driver remove - not needed.
* Disable sysfs device bind / unbind. We are not allowed manually
bind / unbind device from the driver currently.
* Rename some other variables.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Update synthesizer calculation to model I prefer nowadays. It is
mostly just renaming some variables to ones I think are most standard.
Also add 'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement V4L2 subdevice for bandwidth and frequency controls of
SDR usage. That driver now implements both DVB frontend and V4L2
subdevice. Driver itself is I2C driver. Lets see how it works.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Calculate low-pass filter control word dynamically from given radio
channel bandwidth.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use div_u64() to simplify and remove home made divides.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use regmap for I2C register access.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Fix logging. Style issues. Rename things.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We are using I2C client binding now, so remove old media attach.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add I2C bindings.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Replace home made register access routines with regmap.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Rename driver state from priv to dev.
Remove legacy i2c-gate control.
Use I2C client for proper dev_() logging.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Calculate PLL dividers slightly differently, most likely it is now
correct. Move some register values to innitab. Use jiffies to poll
filter lock. Fix logging.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
All users are using driver via I2C client binding so lets remove
unneeded media binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add I2C client bindings to driver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The same code is executed if ret is true or false, so this test can
be removed.
Fix Coverity CID 1268782.
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Rename state from s to dev. Rename some other things. Fix indentations.
Disable driver unbind via sysfs.
indentation prevent unload
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
In a rarely hit randconfig case, the r820t tuner driver can
get built when CONFIG_BITREVERSE is not selected by any
other driver, resulting in this error:
drivers/built-in.o: In function `r820t_read.constprop.3':
:(.text+0xa0594): undefined reference to `byte_rev_table'
For consistency, this adds the 'select BITREVERSE' that
all other similar drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The chips supported by the si2157 driver have two IF outputs (either
pins 12+13 or pins 9+11). Instead of hardcoding the output to be used
add an option to choose which output shall be used.
As this patch changes the default behaviour, the IF interface is
specified in each driver currently using si2157 driver. This is to
keep bisectability.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Bellow is yelling. Ok, sometimes the code is yells a lot, but
but this is not the case there ;)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/tuners/r820t.c:945 r820t_sysfreq_sel() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/tuners/qt1010.c:357 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
This should not happen with the current code, as the i2c_data array
doesn't end with a QT1010_M1, but it doesn't hurt add a BUG_ON
to notify if one modifies it and breaks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Using static const allows the compiler to optimize the code.
Before static const:
text data bss dec hex filename
4982 524 1568 7074 1ba2 drivers/media/tuners/qt1010.o
After static const:
text data bss dec hex filename
4714 524 1568 6806 1a96 drivers/media/tuners/qt1010.o
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://people.freedesktop.org/~airlied/linux into v4l_for_linus
* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits)
media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
hexdump: avoid warning in test function
fs: take i_mutex during prepare_binprm for set[ug]id executables
smp: Fix error case handling in smp_call_function_*()
iommu-common: Fix PARISC compile-time warnings
sparc: Make LDC use common iommu poll management functions
sparc: Make sparc64 use scalable lib/iommu-common.c functions
Break up monolithic iommu table/lock into finer graularity pools and lock
sparc: Revert generic IOMMU allocator.
tools/power turbostat: correct dumped pkg-cstate-limit value
tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
tools/power turbostat: Initial Skylake support
tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
tools/power turbostat: modprobe msr, if needed
tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
Bluetooth: hidp: Fix regression with older userspace and flags validation
config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
...
That solves several merge conflicts:
Documentation/DocBook/media/v4l/subdev-formats.xml
Documentation/devicetree/bindings/vendor-prefixes.txt
drivers/staging/media/mn88473/mn88473.c
include/linux/kconfig.h
include/uapi/linux/media-bus-format.h
The ones at subdev-formats.xml and media-bus-format.h are not trivial.
That's why we opted to merge from DRM.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
"Usual trivial tree updates. Nothing outstanding -- mostly printk()
and comment fixes and unused identifier removals"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
goldfish: goldfish_tty_probe() is not using 'i' any more
powerpc: Fix comment in smu.h
qla2xxx: Fix printks in ql_log message
lib: correct link to the original source for div64_u64
si2168, tda10071, m88ds3103: Fix firmware wording
usb: storage: Fix printk in isd200_log_config()
qla2xxx: Fix printk in qla25xx_setup_mode
init/main: fix reset_device comment
ipwireless: missing assignment
goldfish: remove unreachable line of code
coredump: Fix do_coredump() comment
stacktrace.h: remove duplicate declaration task_struct
smpboot.h: Remove unused function prototype
treewide: Fix typo in printk messages
treewide: Fix typo in printk messages
mod_devicetable: fix comment for match_flags
|
|
In the media drivers, the v4l2 core knows about all submodules
and calls into them from a common function. However this cannot
work if the modules that get called are loadable and the
core is built-in. In that case we get
drivers/built-in.o: In function `set_type':
drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach'
drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach'
drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach'
drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach'
This was working previously, until the IS_ENABLED() macro was used
to replace the construct like
#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE))
with the difference that the new code no longer checks whether it is being
built as a loadable module itself.
To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates
true in exactly the condition that was used previously. The downside
of this is that this trades an obvious link error for a more subtle
runtime failure, but it is clear that the change that introduced the
link error was unintentional and it seems better to revert it for
now. Also, a similar change was originally created by Trent Piepho
and then reverted by teh change to the IS_ENABLED macro.
Ideally Kconfig would be used to avoid the case of a broken dependency,
or the code restructured in a way to turn around the dependency, but either
way would require much larger changes here.
Fixes: 7b34be71db53 ("[media] use IS_ENABLED() macro")
See-also: c5dec9fb248e ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
