summaryrefslogtreecommitdiff
path: root/drivers/media/radio/radio-mr800.c
AgeCommit message (Collapse)Author
2013-03-29[media] radio-mr800: move clamp_t check inside amradio_set_freq()Alexey Klimov
If i run verbose v4l2-compliance with my radio-mr800 device few times then i get warning about frequency out of range: root@machine:~# v4l2-compliance -r /dev/radio0 -v 2 is radio Driver Info: Driver name : radio-mr800 Card type : AverMedia MR 800 USB FM Radio Bus info : usb-0000:00:1a.0-1.2 Driver version: 3.9.0 Capabilities : 0x80050400 Tuner Radio Device Capabilities Device Caps : 0x00050400 Tuner Radio Compliance test for device /dev/radio0 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second radio open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported) test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER: OK warn: v4l2-test-input-output.cpp(234): returned tuner 0 frequency out of range (6550200 not in [1400000...1728000]) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_S_HW_FREQ_SEEK: OK test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 1 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Control ioctls: info: checking v4l2_queryctrl of control 'User Controls' (0x00980001) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) info: checking v4l2_queryctrl of control 'Mute' (0x00980909) test VIDIOC_QUERYCTRL/MENU: OK info: checking control 'User Controls' (0x00980001) info: checking control 'Mute' (0x00980909) test VIDIOC_G/S_CTRL: OK info: checking extended control 'User Controls' (0x00980001) info: checking extended control 'Mute' (0x00980909) test VIDIOC_G/S/TRY_EXT_CTRLS: OK info: checking control event 'User Controls' (0x00980001) info: checking control event 'Mute' (0x00980909) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 2 Private Controls: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) Total: 38, Succeeded: 38, Failed: 0, Warnings: 1 Some printk() debugging showed that vidioc_s_hw_freq_seek() setups radio->curfreq to out of range value (lines 395-396) and calls amradio_set_freq() to set this frequency on device without any out-of-range checks. Patch protects from setting up frequency on device to incorrect value moving clamp_t check inside amradio_set_freq. With this patch we can call amradio_set_freq() with out of range frequency from any place. Also put comment that sometimes radio->curfreq is set to out of range value in vidioc_s_hw_freq_seek(). Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_tuner ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_frequency ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] radio drivers: in non-blocking mode return EAGAIN in hwseekHans Verkuil
VIDIOC_S_HW_FREQ_SEEK should return EAGAIN when called in non-blocking mode. This might change in the future if we add support for this in the future, but right now this is not supported. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_freq_hw_seek constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_freq_hw_seek. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] S_HW_FREQ_SEEK: set capability flags and return ENODATA instead of ↵Hans Verkuil
EAGAIN Set the new capability flags in G_TUNER and return ENODATA if no channels were found. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-07[media] radio-mr800: add hardware seek supportHans Verkuil
Added hardware seek support based on information gleaned from the GPLv2 driver available here: http://sourceforge.net/projects/av-usbradio/ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-07[media] radio-mr800: add support for stereo and signal detectionHans Verkuil
Thanks to an older driver by Faidon Liambotis <paravoid@debian.org> (as noted in the radio-mr800 comment block at the start) for figuring out how to get the signal/stereo state. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-07[media] radio-mr800: cleanup and have it comply to the V4L2 APIHans Verkuil
Implement the control framework and update to the latest V4L2 framework. The v4l2-compliance tool now runs without errors. Fixed bad g/s_tuner handling with respect to mono/stereo. Support control events. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-18USB: convert drivers/media/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in drivers/media/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Frank Zago <frank@zago.net> Cc: Olivier Lorin <o.lorin@laposte.net> Cc: Erik Andren <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Johnson <brijohn@gmail.com> Cc: Leandro Costantino <lcostantino@gmail.com> Cc: Antoine Jacquet <royale@zerezo.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Florent Audebert <florent.audebert@anevia.com> Cc: Sam Doshi <sam@metal-fish.co.uk> Cc: Manu Abraham <manu@linuxtv.org> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: "Igor M. Liplianin" <liplianin@me.by> Cc: Derek Kelly <user.vdr@gmail.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: "André Weidemann" <Andre.Weidemann@web.de> Cc: Martin Wilks <m.wilks@technisat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jose Alberto Reguero <jareguero@telefonica.net> Cc: David Henningsson <david.henningsson@canonical.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Anssi Hannula <anssi.hannula@iki.fi> Cc: Rafi Rubin <rafi@seas.upenn.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Paul Bender <pebender@gmail.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: "Márcio A Alves" <froooozen@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Chris Rankin <rankincj@yahoo.com> Cc: Lee Jones <lee.jones@canonical.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Dean Anderson <linux-dev@sensoray.com> Cc: Pete Eberlein <pete@sensoray.com> Cc: Arvydas Sidorenko <asido4@gmail.com> Cc: Andrea Anacleto <andreaanacleto@libero.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-27[media] radio: Use the subsystem version control for VIDIOC_QUERYCAPMauro Carvalho Chehab
Just like the video drivers, the right thing to do is to use the per-subsystem version control. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-22[media] [RFC] radio-mr800: locking fixesHans Verkuil
- serialize the suspend and resume functions using the global lock. - do not call usb_autopm_put_interface after a disconnect. - fix a race when disconnecting the device. Reported-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth<david@identd.dyndns.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] radio-mr800: fix locking orderHans Verkuil
Don't hold the lock before unregistering the device, since when the device is unregistered the datastruct containing the lock may be freed (if the refcount went to 0). Also fixed the framework documentation that erroneously suggested the wrong locking order as well. Reported-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: radio-mr800: remove BKLHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: radio-am800: let v4l2_device_(un)register handle usb_get/set_intfdataHans Verkuil
v4l2_device_register already sets the usb intfdata to v4l2_dev. So use that instead. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13547): radio: add trivial checks on the tuner and type args.Hans Verkuil
Many radio drivers did not check the tuner and type field correctly for g/s_frequency. These checks have now been added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits) V4L/DVB (13542): ir-keytable: Allow dynamic table change V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage V4L/DVB (13540): ir-common: Cleanup get key evdev code V4L/DVB (13539): ir-common: add __func__ for debug messages V4L/DVB (13538): ir-common: Use a dynamic keycode table V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code V4L/DVB (13534): ir-common: Remove some unused fields/structs V4L/DVB (13533): ir: use dynamic tables, instead of static ones V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it V4L/DVB (13458): go7007: subdev conversion V4L/DVB (13457): s2250: subdev conversion V4L/DVB (13456): s2250: Change module structure V4L/DVB (13528): em28xx: add support for em2800 VC211A card em28xx: don't reduce scale to half size for em2800 em28xx: don't load audio modules when AC97 is mis-detected em28xx: em2800 chips support max width of 640 V4L/DVB (13523): dvb-bt8xx: fix compile warning ... Fix up trivial conflicts due to spelling fixes from the trivial tree in Documentation/video4linux/gspca.txt drivers/media/video/cx18/cx18-mailbox.h
2009-12-05V4L/DVB (13402): radio-mr800 - autosuspend for radio-mr800 driverOliver Neukum
Patch adds autosuspend support for mr800 radio driver. Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13073): radio-mr800: set radio frequency only upon successDavid Ellingsworth
Set radio frequency only upon success. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13072): radio-mr800: simplify device warningsDavid Ellingsworth
Simplify device warnings. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13071): radio-mr800: preserve radio state during suspend/resumeDavid Ellingsworth
Preserve radio state during suspend/resume. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13070): radio-mr800: fix behavior of set_stereo functionDavid Ellingsworth
Fix behavior of set_stereo function. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13069): radio-mr800: ensure the radio is initialized to a ↵David Ellingsworth
consistent state Ensure the radio is initialized to a consistent state. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13068): radio-mr800: remove device initialization from open/closeDavid Ellingsworth
Remove device initialization from open/close. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13067): radio-mr800: fix potential use after freeDavid Ellingsworth
Fix portential use after free. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13066): radio-mr800: remove device removed indicatorDavid Ellingsworth
Remove device removed indicator Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13065): radio-mr800: simplify locking in ioctl callbacksDavid Ellingsworth
Simplify locking in ioctl callbacks. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13064): radio-mr800: simplify access to amradio_deviceDavid Ellingsworth
Simplify access to amradio_device. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13063): radio-mr800: remove unnecessary local variableDavid Ellingsworth
Remove unnecessary local variable. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13062): radio-mr800: simplify error paths in usb probe callbackDavid Ellingsworth
Simplify error paths in usb probe callback. Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13061): radio-mr800: simplify video_device allocationDavid Ellingsworth
simplify video_device allocation Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13060): radio-mr800: implement proper lockingDavid Ellingsworth
Implement proper locking Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21trivial: fix typos "man[ae]g?ment" -> "management"Uwe Kleine-Koenig
Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16V4L/DVB (11842): radio-mr800.c: missing mutex includeAlessio Igor Bogani
radio-mr800.c uses struct mutex, so while <linux/mutex.h> seems to be pulled in indirectly by one of the headers it already includes, the right thing is to include it directly. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11436): radio-mr800: convert to to v4l2_deviceAlexey Klimov
radio-mr800: convert to to v4l2_device. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10463): radio-mr800: fix checking of retval after usb_bulk_msgAlexey Klimov
Patch corrects checking of returned value after usb_bulk_msg. Now we also check if number of transferred bytes equals to BUFFER_LENGTH. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10462): radio-mr800: increase version and add commentsAlexey Klimov
Increase driver version to 0.10, remove old and add new useful comments. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10461): radio-mr800: add few lost mutex locksAlexey Klimov
Patch adds two lost mutex locks. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10460): radio-mr800: add stereo supportAlexey Klimov
Patch introduces new amradio_set_stereo function. Driver calls this func to make stereo radio reception. Corrects checking of returned value after usb_bulk_msg. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10459): radio-mr800: fix amradio_set_freqAlexey Klimov
Fixing frequency adjustment to provide better diapason(band?) fit. Also, add AMRADIO_SET_FREQ to the list of commands. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10458): radio-mr800: move radio start and stop in one functionAlexey Klimov
Patch introduces new amradio_set_mute function. Amradio_start and amradio_stop removed. This makes driver more flexible and it's useful for next changes. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10457): radio-mr800: add more dev_err messages in probeAlexey Klimov
Patch adds 3 dev_err messages in usb_amradio_probe() function. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10456): radio-mr800: place dev_err instead of dev_warnAlexey Klimov
There should be dev_err message if video_register_device() fails. Correct this situation. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10455): radio-mr800: codingstyle cleanupsAlexey Klimov
Cleanups of many if-check constructions. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10316): v4l/dvb: use usb_make_path in usb-radio driversAlexey Klimov
Place usb_make_path in dsbr100.c, radio-mr800.c, radio-si470x.c that used when reporting bus_info information in vidioc_querycap. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10317): radio-mr800: fix radio->muted and radio->stereoAlexey Klimov
Move radio->muted and radio->stereo in section where radio mutex is locked to avoid possible race condition problems or access to memory. Thanks to David Ellingsworth <david@identd.dyndns.org> for pointing to this weak place in driver. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 04:39:09 +0000