| Age | Commit message (Collapse) | Author |
|---|
|
Take note that the SX8 IQ mode is only available on a single tuner, and
remove the MCI/SX8 DIAG CMD defines.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The MCI can report the command status more finegrained, so, add more
status code defines and update the MCI_SUCCESS macro.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Split off all code specific to the MaxSX8 cards to a separate ddbridge-sx8
module and hook it up in the Makefile. This also adds evaluation of the
mci_type to allow for using different attach handling for different cards.
As different cards can implement things differently (ie. support differing
frontend_ops, and have different base structs being put ontop of the
common mci_base struct), this introduces the mci_cfg struct which is
initially used to hold a few specifics to the -sx8 submodule. While at it,
the handling of the i/q mode is adjusted slightly. Besides this and
handling mci_base and sx8_base struct pointers where needed, all code
is copied unmodified from ddbridge-mci.c.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
In preparation for splitting all MaxSX8 related code parts from the common
MCI code, prefix both mci_cmd() and mci_config() functions with ddb_,
remove the static marking and add matching function prototypes to
ddbridge-mci.h so these functions can be reused from other files within
the ddbridge driver. As this requires the mci-related structs to be
defined in ddbridge-mci.h, move struct mci and struct mci_base there and
clean them up.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Recent FPGA firmware reports more data and values in sent command
responses. Adjust the mci_command and mci_result structs including it's
unions to match these changes and add a few comments explaining things.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Adjustments to match the FPGA firmware, and the signal I/Q values are
reported as s16 types from the card firmware.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Update the copyright year information in the MCI headers to 2017-2018.
Picked up from the upstream dddvb GIT.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Fixes two checkpatch warnings
WARNING: function definition argument 'xxx' should also have an identifier name
in the ddb_mci_attach() prototype definition. checkpatch keeps complaining
on the "int (**fn_set_input)" as it seems to have issues with the
ptr-to-ptr, though this probably needs fixing in checkpatch.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
In stop(), an (unlikely) out-of-bounds write error can occur when setting
the demod_in_use element indexed by state->demod to zero, as state->demod
isn't checked for being in the range of the array size of demod_in_use, and
state->demod maybe carrying the magic 0xff (demod unused) value. Prevent
this by checking state->demod not exceeding the array size before setting
the element value. To make the code a bit easier to read, replace the magic
value and the number of array elements with defines, and use them at a few
more places.
Detected by CoverityScan, CID#1468550 ("Out-of-bounds write")
Thanks to Colin for reporting the problem and providing an initial patch.
Fixes: daeeb1319e6f ("media: ddbridge: initial support for MCI-based MaxSX8 cards")
Reported-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This adds initial support for the new MCI-based (micro-code interface)
DD cards, with the first one being the MaxSX8 eight-tuner DVB-S/S2/S2X
PCIe card. The MCI is basically a generalized interface implemented in
the card's FPGA firmware and usable for all kind of cards, without the
need to implement any demod/tuner drivers as this interface "hides" any
I2C interface to the actual ICs, in other words any required driver is
implemented in the card firmware.
At this stage, the MCI interface is quite rudimentary with things like
signal statistics reporting missing, but is already working to serve
DVB streams to DVB applications. Missing functionality will be enabled
over time.
This implements only the ddbridge-mci sub-object and hooks it up to the
Makefile so the object gets build. The upcoming commits hook this module
into all other ddbridge parts where required, including device IDs etc.
Picked up from the upstream dddvb-0.9.33 release.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
