| Age | Commit message (Collapse) | Author |
|---|
|
It is really weird that the media controller sources are all top-level
in drivers/media. It is a bit of a left-over from long ago when most
media sources were all at the top-level. At some point we reorganized
the directory structure, but the media-*.c sources where never moved
to their own directory.
So create a new mc directory and move all sources there. Also rename
the prefix from media- to mc-.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- remove the deprecated Zoran driver from staging
- new I2C driver: ST MIPID02 CSI-2 camera bridge
- new platform driver: Amlogic Meson AO CEC G12A Controller
- add support for USB audio via the media controller
- au0828 driver is now supported via the media controller on both on
media and on usbaudio
- new kernel test for the media device allocator
- add support for stateless decoder at vicodec driver
- lots of other driver improvements fixes and cleanups
* tag 'media/v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (218 commits)
media: dt-bindings: aspeed-video: Add missing memory-region property
media: platform: Aspeed: Make reserved memory optional
media: platform: Aspeed: Remove use of reset line
media: stm32-dcmi: return appropriate error codes during probe
media: vsp1: Add support for missing 16-bit RGB555 formats
media: vsp1: Add support for missing 16-bit RGB444 formats
media: vsp1: Add support for missing 32-bit RGB formats
media: v4l: Add definitions for missing 16-bit RGB555 formats
media: v4l: Add definitions for missing 16-bit RGB4444 formats
media: v4l: Add definitions for missing 32-bit RGB formats
media: zoran: remove deprecated driver
media: MAINTAINERS: Update AO CEC with ao-cec-g12a driver
media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver
media: dt-bindings: media: meson-ao-cec: Add G12A AO-CEC-B Compatible
media: cros-ec-cec: decrement HDMI device refcount
media: seco-cec: decrement HDMI device refcount
media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper
media: stih_cec: use new cec_notifier_parse_hdmi_phandle helper
media: s5p_cec: use new cec_notifier_parse_hdmi_phandle helper
media: meson: ao-cec: use new cec_notifier_parse_hdmi_phandle helper
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If requests are used when they shouldn't, or not used when they should,
then return EBADR (Invalid request descriptor) instead of EACCES.
The reason for this change is that EACCES has more to do with permissions
(not being the owner of the resource), but in this case the request file
descriptor is just wrong for the current mode of the device.
Update the documentation accordingly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in media_request_poll(). Fix this, otherwise
epoll() would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Currently media request ioctl operations fail on 64-bit kernel with
32-bit userspace due to missing .compat_ioctl callback.
Because no ioctl command uses any argument, just reuse existing ioctl
handler for compat_ioctl too.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
If requests are not supported by the driver, then return EACCES, not
EPERM.
If you attempt to mix queueing buffers directly and using requests,
then EBUSY is returned instead of EPERM: once a specific queueing mode
has been chosen the queue is 'busy' if you attempt the other mode
(i.e. direct queueing vs via a request).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add helper functions to prevent a completed request from being
re-inited while it is being accessed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Instead of returning -ENOENT when a request_fd was not found (VIDIOC_QBUF
and VIDIOC_G/S/TRY_EXT_CTRLS), we now return -EINVAL. This is in line
with what we do when invalid dmabuf fds are passed to e.g. VIDIOC_QBUF.
Also document that EINVAL is returned for invalid m.fd values, we never
documented that.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add media_request_object_find to find a request object inside a
request based on ops and priv values.
Objects of the same type (vb2 buffer, control handler) will have
the same ops value. And objects that refer to the same 'parent'
object (e.g. the v4l2_ctrl_handler that has the current driver
state) will have the same priv value.
The caller has to call media_request_object_put() for the returned
object since this function increments the refcount.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add initial media request support:
1) Add MEDIA_IOC_REQUEST_ALLOC ioctl support to media-device.c
2) Add struct media_request to store request objects.
3) Add struct media_request_object to represent a request object.
4) Add MEDIA_REQUEST_IOC_QUEUE/REINIT ioctl support.
Basic lifecycle: the application allocates a request, adds
objects to it, queues the request, polls until it is completed
and can then read the final values of the objects at the time
of completion. When it closes the file descriptor the request
memory will be freed (actually, when the last user of that request
releases the request).
Drivers will bind an object to a request (the 'adds objects to it'
phase), when MEDIA_REQUEST_IOC_QUEUE is called the request is
validated (req_validate op), then queued (the req_queue op).
When done with an object it can either be unbound from the request
(e.g. when the driver has finished with a vb2 buffer) or marked as
completed (e.g. for controls associated with a buffer). When all
objects in the request are completed (or unbound), then the request
fd will signal an exception (poll).
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
