summaryrefslogtreecommitdiff
path: root/drivers/media/i2c
AgeCommit message (Collapse)Author
2014-12-11Merge tag 'media/v3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ...
2014-12-04[media] smiapp: Support V4L2_SEL_TGT_NATIVE_SIZESakari Ailus
Add support for selection target V4L2_SEL_TGT_NATIVE_SIZE. It is equivalent of what V4L2_SEL_TGT_CROP_BOUNDS used to be. Support for V4L2_SEL_TGT_CROP_BOUNDS is still supported by the driver as a compatibility interface. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-04[media] smiapp: Set left and top to zero for crop bounds selectionSakari Ailus
The fields were previously uninitialised, leaving the returned values to where the user had set them. This was never the intention. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02[media] adv7511: improve colorspace handlingHans Verkuil
Add support for YCbCr output and support setting colorspace, YCbCr encoding and quantization for the AVI InfoFrame. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] i2c: Deletion of an unnecessary check before the function call ↵Markus Elfring
"rc_unregister_device" The rc_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] i2c: Make use of media_bus_format enumBoris BREZILLON
In order to have subsytem agnostic media bus format definitions we've moved media bus definitions to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Replace all references to the old definitions in i2c drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] smiapp: Only some selection targets are settableSakari Ailus
Setting a non-settable selection target caused BUG() to be called. The check for valid selections only takes the selection target into account, but does not tell whether it may be set, or only get. Fix the issue by simply returning an error to the user. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Cc: stable@vger.kernel.org # for v3.10 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] adv7604: Correct G/S_EDID behaviourHans Verkuil
In order to have v4l2-compliance tool pass the G/S_EDID some modifications where needed in the driver. In particular, the edid.reserved zone must be blanked. Based on a patch from Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>, but reworked it a bit. It should use 'data' (which depends on edid.present) instead of edid.blocks as the check whether edid data is present. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] adv7511: fix G/S_EDID behaviorHans Verkuil
This fixes the v4l2-compliance failures. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] adv7842: fix G/S_EDID behaviorHans Verkuil
Make this pass the v4l2-compliance test. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] cx25840/cx18: Use standard ordering of mask and shiftJoe Perches
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. This use has a mask then shift which is not the normal style. Move the shift before the mask to match nearly all the other uses in kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx25840: convert max_buf_size var to lowercaseMauro Carvalho Chehab
CodingStyle fix: vars should be in lowercase. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx25840: Don't report an error if max size is adjustedMauro Carvalho Chehab
There's no reason to report: cx25840 7-0044: Firmware download size changed to 16 bytes max length If the driver needs to adjust the buffer's maximum size. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Update PLL when setting formatSakari Ailus
The media bus format BPP does affect PLL. Recalculate PLL if the format changes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Set valid link frequency rangeSakari Ailus
Set supported link frequencies in the menu in control initialisation and when the bpp changes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Clean up smiapp_set_format()Sakari Ailus
smiapp_set_format() has accumulated a fair amount of changes without a needed refactoring, do the cleanup now. There's also an unlocked version of v4l2_ctrl_range_changed(), using that fixes a small serialisation issue with the user space interface. __v4l2_ctrl_modify_range() is used instead of v4l2_ctrl_modify_range() in smiapp_set_format_source() since the mutex is now held during the function call. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Take valid link frequencies into account in supported mbus codesSakari Ailus
Some media bus codes may be unavailable depending on the available media bus codes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Gather information on valid link rate and BPP combinationsSakari Ailus
Not all link rates are possible with all BPP values. Also rearrange other initialisation a little. Obtaining possible PLL configurations earlier requires that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Split calculating PLL with sensor's limits from updating itSakari Ailus
The first one is handy for just trying out a PLL configuration without a need to apply it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Use actual pixel rate calculated by the PLL calculatorSakari Ailus
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: Add pixel rate in pixel array as output parametersSakari Ailus
The actual pixel array pixel rate may be something else than vt_pix_clk_freq on some implementations. Add a new field which contains the corrected value. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Remove validation of op_pix_clk_divSakari Ailus
op_pix_clk_div is directly assigned and not calculated. There's no need to verify it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: The PLL calculator handles sensors with VT clocks onlySakari Ailus
No need to pretend the OP limits are there anymore. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: Don't validate OP clocks if there are noneSakari Ailus
For profile 0 sensors (which have no OP clocks), the OP limits are in fact VT limits. Do not verify them again. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: Calculate OP clocks only for sensors that have themSakari Ailus
Profile 0 sensors have no OP clock branck in the clock tree. The PLL calculator still calculated them, they just weren't used for anything. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: Unify OP and VT PLL structsSakari Ailus
Uniform representation for VT and OP clocks. This is preparation for calculating the VT clocks using the OP clock code. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: External clock frequency isn't an output valueSakari Ailus
It's input. Move it elsewhere in the struct. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: Separate bounds checking into a separate functionSakari Ailus
Enough work for this function already. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: The clock tree values are unsigned --- fix debug printsSakari Ailus
These values are unsigned, so use %u instead of %d. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp-pll: Correct clock debug printsSakari Ailus
The PLL flags were not used correctly. Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] smiapp: Take mutex during PLL update in sensor initialisationSakari Ailus
The mutex does not serialise anything in this case but avoids a lockdep warning from the control framework. Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-09Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab
* patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
2014-09-21[media] adv7604: fix inverted conditionHans Verkuil
The log_status function should show HDMI information, but the test checking for an HDMI input was inverted. Fix this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] adv7604/adv7842: fix il_vbackporch typo and zero the structHans Verkuil
Both adv7604 and adv7842 had the same typo in the code that sets the vertical backporch for the second interlaced field: it was assigned to vbackporch instead of il_vbackporch. In addition, the timings struct wasn't zeroed in the adv7842 driver, leaving several fields to undefined values causing the timing match function to fail. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] drivers: media: i2c: adv7343_regs.h: Fix typo in #ifndefRasmus Villemoes
Test for definedness of the macro which is actually defined, and which matches the name of the file. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] tvp7002: Don't update device->streaming if write to register failsAxel Lin
This ensures device->streaming has correct status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21Merge remote-tracking branch 'linus/master' into patchworkMauro Carvalho Chehab
There are some patches that depends on media-v3.16-rc6. So, merge back from upstream before applying them. * linus/master: (1123 commits) drm/nouveau: ltc/gf100-: fix cbc issues on certain boards drm/bochs: add missing drm_connector_register call drm/cirrus: add missing drm_connector_register call staging: vt6655: buffer overflow in ioctl USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter USB: EHCI: unlink QHs even after the controller has stopped [SCSI] fix for bidi use after free [SCSI] fix regression that accidentally disabled block-based tcq [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page drm/nouveau/runpm: fix module unload drm/radeon/px: fix module unload vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops drm/radeon: don't reset dma on r6xx-evergreen init drm/radeon: don't reset sdma on CIK init drm/radeon: don't reset dma on NI/SI init drm/radeon/dpm: fix resume on mullins drm/radeon: Disable HDP flush before every CS again for < r600 ...
2014-09-03[media] lm3560: simplify boolean testsMauro Carvalho Chehab
Instead of using if (on == true), just use if (on). That allows a faster mental parsing when analyzing the code. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03[media] ov9740: use true/false for boolean varsMauro Carvalho Chehab
Instead of using 0 or 1 for boolean, use the true/false defines. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03[media] smiapp-core: use true/false for boolean varsMauro Carvalho Chehab
Instead of using 0 or 1 for boolean, use the true/false defines. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03[media] s5k5baf: remove an uneeded semicolonMauro Carvalho Chehab
We don't use semicolons after curly braces in the middle of the code. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03[media] smiapp: Set sub-device ownerSakari Ailus
The smiapp driver is the owner of the sub-devices exposed by the smiapp driver. This prevents unloading the module whilst it's in use. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03[media] smiapp: Fix power count handlingSakari Ailus
The sensor may be powered by either one of its sub-devices being accessed from the user space (an open file handle) or by its s_power() op being called with non-zero on argument. The driver counts the users and if any reason to keep the device powered exists it will be powered. However, a faulty condition was used in recognising the need to power off the sensor, leading it to be powered off every time any of its uses went away. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] tda7432: Fix setting TDA7432_MUTE bit for TDA7432_RF registerAxel Lin
Fix a copy-paste bug when converting to the control framework. Fixes: commit 5d478e0de871 ("[media] tda7432: convert to the control framework") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] soc_camera: ov772x: Include media/v4l2-image-sizes.hAxel Lin
So we can remove the same defines in the driver code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] soc_camera: mt9t112: Include media/v4l2-image-sizes.hAxel Lin
So we can remove the same defines in the driver code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] vs6624: Include media/v4l2-image-sizes.hAxel Lin
So we can remove the same defines in the driver code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] ov7670: Include media/v4l2-image-sizes.hAxel Lin
So we can remove the same defines in the driver code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] saa6752hs: Convert to devm_kzalloc()Axel Lin
Using the managed function the kfree() calls can be removed from the probe error path and the remove handler. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21[media] cx25840: Spelling s/compuations/computations/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 18:01:57 +0000