summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/Kconfig
AgeCommit message (Collapse)Author
2018-02-23media: v4l2: i2c: ov7670: Implement OF mbus configurationJacopo Mondi
ov7670 driver supports two optional properties supplied through platform data, but currently does not support any standard video interface property. Add support through OF parsing for 2 generic properties (vsync and hsync polarities) and for one custom property already supported through platform data to suppress pixel clock output during horizontal blanking. While at there, check return value of register writes in set_fmt function and rationalize spacings. Signal polarities and pixel clock blanking verified through scope and image capture. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov2685: add support for OV2685 sensorShunqian Zheng
This patch adds driver for Omnivision's ov2685 sensor. Though the ov2685 can output yuv data, this driver only supports the raw bayer format, including the following features: - output 1600x1200 at 30fps - test patterns - manual exposure/gain control - vblank and hblank - media controller - runtime pm [Sakari Ailus: trivial: ov5695_of_match -> ov2685_of_match] Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-23media: ov5695: add support for OV5695 sensorShunqian Zheng
This patch adds driver for Omnivision's ov5695 sensor, the driver supports following features: - supported resolutions + 2592x1944 at 30fps + 1920x1080 at 30fps + 1296x972 at 60fps + 1280x720 at 30fps + 640x480 at 120fps - test patterns - manual exposure/gain(analog and digital) control - vblank and hblank - media controller - runtime pm Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-22media: i2c: Add TDA1997x HDMI receiver driverTim Harvey
Add support for the TDA1997x HDMI receivers. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix type 'testin' -> 'testing'] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-05media: i2c: Add the ov7740 image sensor driverWenyou Yang
The ov7740 (color) image sensor is a high performance VGA CMOS image snesor, which supports for output formats: RAW RGB and YUV and image sizes: VGA, and QVGA, CIF and any size smaller. Signed-off-by: Songjun Wu <songjun.wu@microchip.com> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04media: fix usage of whitespaces and on indentationMauro Carvalho Chehab
On several places, whitespaces are being used for indentation, or even at the end of the line. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-29media: i2c: as3645a: Remove driverSakari Ailus
Remove the V4L2 AS3645A sub-device driver in favour of the LED flash class driver for the same hardware, drivers/leds/leds-as3645a.c. The latter uses the V4L2 flash LED class framework to provide V4L2 sub-device interface. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30media: ov13858: Select V4L2_FWNODESakari Ailus
The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig. Fixes: 5fcf092e0c9f ("[media] ov13858: add support for OV13858 sensor") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-27media: imx274: V4l2 driver for Sony imx274 CMOS sensorLeon Luo
The imx274 is a Sony CMOS image sensor that has 1/2.5 image size. It supports up to 3840x2160 (4K) 60fps, 1080p 120fps. The interface is 4-lane MIPI CSI-2 running at 1.44Gbps each. This driver has been tested on Xilinx ZCU102 platform with a Leopard LI-IMX274MIPI-FMC camera board. Support for the following features: -Resolutions: 3840x2160, 1920x1080, 1280x720 -Frame rate: 3840x2160 : 5 – 60fps 1920x1080 : 5 – 120fps 1280x720 : 5 – 120fps -Exposure time: 16 – (frame interval) micro-seconds -Gain: 1x - 180x -VFLIP: enable/disabledrivers/media/i2c/imx274.c -Test pattern: 12 test patterns Signed-off-by: Leon Luo <leonl@leopardimaging.com> Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-09-23media: tc358743: add CEC supportHans Verkuil
Add CEC support for the tc358743 HDMI-CSI bridge. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-08media: i2c: add KConfig dependenciesArnd Bergmann
The new ov5670 driver fails to build when VIDEO_V4L2_SUBDEV_API or MEDIA_CONTROLLER are disabled: drivers/media/i2c/ov5670.c: In function 'ov5670_open': drivers/media/i2c/ov5670.c:1917:5: error: implicit declaration of function 'v4l2_subdev_get_try_format'; did you mean 'v4l2_subdev_notify_event'? [-Werror=implicit-function-declaration] v4l2_subdev_get_try_format(sd, fh->pad, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~ v4l2_subdev_notify_event drivers/media/i2c/ov5670.c:1917:38: error: 'struct v4l2_subdev_fh' has no member named 'pad' v4l2_subdev_get_try_format(sd, fh->pad, 0); ^~ drivers/media/i2c/ov5670.c: In function 'ov5670_do_get_pad_format': drivers/media/i2c/ov5670.c:2198:17: error: invalid type argument of unary '*' (have 'int') fmt->format = *v4l2_subdev_get_try_format(&ov5670->sd, cfg, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fmt->pad); ~~~~~~~~~ drivers/media/i2c/ov5670.c: At top level: drivers/media/i2c/ov5670.c:2444:19: error: 'v4l2_subdev_link_validate' undeclared here (not in a function); did you mean 'v4l2_subdev_init'? .link_validate = v4l2_subdev_link_validate, ^~~~~~~~~~~~~~~~~~~~~~~~~ v4l2_subdev_init drivers/media/i2c/ov5670.c: In function 'ov5670_probe': drivers/media/i2c/ov5670.c:2492:12: error: 'struct v4l2_subdev' has no member named 'entity' This adds both to the Kconfig entry. Fixes: 5de35c9b8dcd ("media: i2c: Add Omnivision OV5670 5M sensor support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: i2c: adv748x: add adv748x driverKieran Bingham
Provide support for the ADV7481 and ADV7482. The driver is modelled with 4 subdevices to allow simultaneous streaming from the AFE (Analog front end) and HDMI inputs though two CSI TX entities. The HDMI entity is linked to the TXA CSI bus, whilst the AFE is linked to the TXB CSI bus. The driver is based on a prototype by Koji Matsuoka in the Renesas BSP, and an earlier rework by Niklas Söderlund. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-19media: i2c: Add Omnivision OV5670 5M sensor supportChiranjeevi Rapolu
Provides single source pad with up to 2592x1944 pixels at 10-bit raw bayer format over MIPI CSI2 two lanes at 840Mbps/lane. The driver supports following features: - up to 30fps at 5M pixels - manual exposure - digital/analog gain - V-blank/H-blank - test pattern - media controller - runtime pm [mchehab@s-opensource.com: fix a trivial merge conflict at Makefile] Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-18media: ov6650: convert to standalone v4l2 subdeviceJanusz Krzysztofik
Remove the soc_camera dependencies and move the diver to i2c Lost features, fortunately not used or not critical on test platform: - soc_camera power on/off callback - replaced with clock enable/disable only, no support for platform provided regulators nor power callback, - soc_camera sense request - replaced with arbitrarily selected default master clock rate and pixel clock limit, no support for platform requested values, - soc_camera board flags - no support for platform requested mbus config tweaks. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] dw9714: Initial driver for dw9714 VCMRajmohan Mani
DW9714 is a 10 bit DAC, designed for linear control of voice coil motor. This driver creates a V4L2 subdevice and provides control to set the desired focus. [Sakari Ailus: Add MAINTAINERS entry.] Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] ov13858: add support for OV13858 sensorHyungwoo Yang
This patch adds driver for Omnivision's ov13858 sensor, the driver supports following features: - manual exposure/gain(analog and digital) control support - two link frequencies - VBLANK/HBLANK support - test pattern support - media controller support - runtime pm support - supported resolutions + 4224x3136 at 30FPS + 2112x1568 at 30FPS(default) and 60FPS + 2112x1188 at 30FPS(default) and 60FPS + 1056x784 at 30FPS(default) and 60FPS [Sakari Ailus: use V4L2_CID_DIGITAL_GAIN instead, add MAINTAINERS entry.] Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] add Omnivision OV5640 sensor driverSteve Longerbeam
This driver is based on ov5640_mipi.c from Freescale imx_3.10.17_1.0.0_beta branch, modified heavily to bring forward to latest interfaces and code cleanup. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-20[media] media: i2c: max2175: Add MAX2175 supportRamesh Shanmugasundaram
This patch adds driver support for the MAX2175 chip. This is Maxim Integrated's RF to Bits tuner front end chip designed for software-defined radio solutions. This driver exposes the tuner as a sub-device instance with standard and custom controls to configure the device. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-07Merge tag 'media/v4.12-2' into patchworkMauro Carvalho Chehab
media fixes for v4.12-rc4 * tag 'media/v4.12-2': (598 commits) [media] rc-core: race condition during ir_raw_event_register() [media] cec: drop MEDIA_CEC_DEBUG [media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER [media] cec: select CEC_CORE instead of depend on it [media] rainshadow-cec: ensure exit_loop is intialized [media] atomisp: don't treat warnings as errors Linux 4.12-rc3 x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release() ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition PCI/msi: fix the pci_alloc_irq_vectors_affinity stub blk-mq: Only register debugfs attributes for blk-mq queues x86/timers: Move simple_udelay_calibration past init_hypervisor_platform ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-06[media] v4l: Switch from V4L2 OF not V4L2 fwnode APISakari Ailus
Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs. Async OF matching is replaced by fwnode matching and OF matching support is removed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-04[media] cec: select CEC_CORE instead of depend on itHans Verkuil
The CEC framework is used by both drm and media. That makes it tricky to get the dependencies right. This patch moves the CEC_CORE and MEDIA_CEC_NOTIFIER config options out of the media menu and instead drivers that want to use CEC should select CEC_CORE and MEDIA_CEC_NOTIFIER (if needed). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: make GPIOLIB an optional dependencyMauro Carvalho Chehab
As warned by kbuild test robot: warning: (VIDEO_EM28XX_V4L2) selects VIDEO_OV2640 which has unmet direct dependencies (MEDIA_SUPPORT && VIDEO_V4L2 && I2C && GPIOLIB && MEDIA_CAMERA_SUPPORT) The em28xx driver can use ov2640, but it doesn't depend (or use) the GPIOLIB in order to power off/on the sensor. So, as we want to allow both usages with and without GPIOLIB, make its dependency optional. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] cec: Kconfig cleanupHans Verkuil
The Kconfig options for the CEC subsystem were a bit messy. In addition there were two cec sources (cec-edid.c and cec-notifier.c) that were outside of the media/cec directory, which was weird. Move those sources to media/cec as well. The cec-edid and cec-notifier functionality is now part of the cec module and these are no longer separate modules. Also remove the MEDIA_CEC_EDID config option and include it with the main CEC config option (which defined CEC_EDID anyway). Added static inlines to cec-edid.h for dummy functions when CEC_CORE isn't defined. CEC drivers should now depend on CEC_CORE. CEC drivers that need the cec-notifier functionality must explicitly select CEC_NOTIFIER. The s5p-cec and stih-cec drivers depended on VIDEO_DEV instead of CEC_CORE, fix that as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] media: i2c: Add support for OV5647 sensorRamiro Oliveira
The OV5647 sensor from Omnivision supports up to 2592x1944 @ 15 fps, RAW 8 and RAW 10 output formats, and MIPI CSI-2 interface. The driver adds support for 640x480 RAW 8. Signed-off-by: Ramiro Oliveira <roliveir@synopsys.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] media: Add a driver for the ov5645 camera sensorTodor Tomov
The ov5645 sensor from Omnivision supports up to 2592x1944 and CSI2 interface. The driver adds support for the following modes: - 1280x960 - 1920x1080 - 2592x1944 Output format is packed 8bit UYVY. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: convert from soc-camera to a standard subdev sensor driverHans Verkuil
Convert ov2640 to a standard subdev driver. The soc-camera driver no longer uses this driver, so it can safely be converted. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31[media] media: Driver for Toshiba et8ek8 5MP sensorPavel Machek
Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be used for taking photos in 2.5MP resolution with fcam-dev. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21[media] s5k4ecgx: select CRC32 helperArnd Bergmann
A rare randconfig build failure shows up in this driver when the CRC32 helper is not there: drivers/media/built-in.o: In function `s5k4ecgx_s_power': s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le' This adds the 'select' that all other users of this function have. Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16[media] cec: move the CEC framework out of staging and to mediaHans Verkuil
The last open issues have been addressed, so it is time to move this out of staging and into the mainline and to move the public cec headers to include/uapi/linux. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] media Kconfig: improve the spi integrationHans Verkuil
The SPI driver looked a bit lonely in the config menu, and it didn't support the autoselect. Shift things around a bit so it looks more logical. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09[media] media: mt9m111: move mt9m111 out of soc_cameraRobert Jarzmik
As the mt9m111 is now working as a standalone v4l2 subdevice sensor, move it out of soc_camera directory and sever its dependency on soc_camera. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] media: adv7180: add power pin controlSteve Longerbeam
Some targets control the ADV7180 power pin via a gpio, so add optional support for "powerdown" pin control. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24[media] ad5820: Add driver for auto-focus coilPavel Machek
This adds support for AD5820 autofocus coil, found for example in Nokia N900 smartphone. Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28[media] cec: adv7511: add cec supportHans Verkuil
Add CEC support to the adv7511 driver. Signed-off-by: Hans Verkuil <hansverk@cisco.com> [k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil] Signed-off-by: Kamil Debski <kamil@wypas.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28[media] cec: adv7842: add cec supportHans Verkuil
Add CEC support to the adv7842 driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28[media] cec: adv7604: add cec supportHans Verkuil
Add CEC support to the adv7604 driver. Signed-off-by: Hans Verkuil <hansverk@cisco.com> [k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil] [k.debski@samsung.com: add missing methods cec/io_write_and_or] [k.debski@samsung.com: change adv7604 to adv76xx in added functions] [hansverk@cisco.com: use _clr_set instead of _and_or] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2015-12-18[media] cs3308: add new 8-channel volume control driverHans Verkuil
Add simple support for this 8 channel volume control driver. Currently all it does is to unmute all 8 channels. Based upon Devin's initial patch made for an older kernel which I cleaned up and rebased. Thanks to Kernel Labs for that work. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-09-03[media] tc358743: add missing Kconfig dependency/selectHans Verkuil
As reported by Randy: > when CONFIG_MEDIA_CONTROLLER is not enabled: > > ../drivers/media/i2c/tc358743.c: In function 'tc358743_probe': > ../drivers/media/i2c/tc358743.c:1890:29: error: 'struct v4l2_subdev' has no member named 'entity' > err = media_entity_init(&sd->entity, 1, &state->pad, 0); > ^ > ../drivers/media/i2c/tc358743.c:1940:26: error: 'struct v4l2_subdev' has no member named 'entity' > media_entity_cleanup(&sd->entity); > ^ > ../drivers/media/i2c/tc358743.c: In function 'tc358743_remove': > ../drivers/media/i2c/tc358743.c:1955:26: error: 'struct v4l2_subdev' has no member named 'entity' > media_entity_cleanup(&sd->entity); > ^ This driver depends on VIDEO_V4L2_SUBDEV_API and needs to select HDMI. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] i2c: Make all i2c devices visible if COMPILE_TEST=yGeert Uytterhoeven
Make the i2c devices menu visible when compile-testing, to allow selecting additional drivers on top of the drivers that are already automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled. Without this, many drivers stay disabled during e.g. allmodconfig. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridgeMats Randgaard
The driver is tested on our hardware and all the implemented features works as expected. Missing features: - CEC support - HDCP repeater support - IR support Signed-off-by: Mats Randgaard <matrandg@cisco.com> [hans.verkuil@cisco.com: updated copyright year to 2015] [hans.verkuil@cisco.com: update confusing confctl_mutex comment] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] adv7604/cobalt: Allow compile test if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency of VIDEO_ADV7604 and VIDEO_COBALT (the latter selects the former) on GPIOLIB if COMPILE_TEST is enabled. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] adv7604: log infoframesHans Verkuil
Add support for logging the detected InfoFrames for the adv76xx. Helps in debugging what is actually received on the HDMI link. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] adv7511: log the currently set infoframesHans Verkuil
The adv7511 sets up InfoFrames that are used when transmitting video. Log the contents of those InfoFrames so it is possible to see exactly what the transmitter is sending. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] adv7604/cobalt: missing GPIOLIB dependencyHans Verkuil
The adv7604 driver depends on GPIOLIB, and therefore cobalt depends on it as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02[media] media: i2c: add support for omnivision's ov2659 sensorBenoit Parrot
this patch adds support for omnivision's ov2659 sensor, the driver supports following features: 1: Asynchronous probing 2: DT support 3: Media controller support Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] adv7180: Add media controller supportLars-Peter Clausen
Add media controller support to the adv7180 driver by registering a media entity instance for it as well as implementing pad ops for configuring the format. As there currently don't seem to be any users of the video ops format operations those are removed as well in this patch. Also set the V4L2_SUBDEV_FL_HAS_DEVNODE flag for the subdevice so it is possible to create a subdevice device node. Since the driver now depends on VIDEO_V4L2_SUBDEV_API all drivers which select the driver need to depend on that symbol as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27[media] adv7842: simplify InfoFrame loggingMartin Bugge
Use the new logging functions from the hdmi module. Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-22[media] media/i2c/Kconfig: drop superfluous MEDIA_CONTROLLERHans Verkuil
These drivers depend on VIDEO_V4L2_SUBDEV_API, which in turn depends on MEDIA_CONTROLLER. So it is sufficient to just depend on VIDEO_V4L2_SUBDEV_API. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-16[media] vino/saa7191: move to staging in preparation for removalHans Verkuil
These drivers haven't been tested in a long, long time. The hardware is ancient and hopelessly obsolete. These drivers also need to be converted to newer media frameworks but due to the lack of hardware that's going to be impossible. So these drivers are a prime candidate for removal. If someone is interested in working on these drivers to prevent their removal, then please contact the linux-media mailinglist. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-07-22[media] mt9v032: use regmapPhilipp Zabel
This switches all register accesses to use regmap. It allows to use the regmap cache, tracing, and debug register dump facilities, and removes the need to open code read-modify-writes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 16:47:24 +0000