summaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6960): tda18271: add support for NXP TDA18271HD/C2Michael Krufky
Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6959): tda18271: add MODULE_VERSIONMichael Krufky
version 0.1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6958): tda18271: clean up function tda18271_set_analog_paramsMichael Krufky
make set_analog_params function look consistent with set_params function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6957): tda18271: fail table lookups if frequency is out of rangeMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6930): xc5000: Removed erroneous definesSteven Toth
Basic cleanup. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6928): tda18271: break calculation functions out of tda18271_tuneMichael Krufky
Break out the following new functions from tda18271_tune: tda18271_calc_bp_filter tda18271_calc_km tda18271_calc_rf_band tda18271_calc_gain_taper tda18271_calc_ir_measure tda18271_calc_rf_cal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6927): tda18271: improve printk macrosMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6926): tda18271: consolidate table lookup functionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6925): tda18271: move state structures to tda18271-priv.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6924): tda18271: fix whitespace in tda18271_ir_measureMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6923): tda18271: remove extraneous debugMichael Krufky
We don't need to do a dbg_info during tda18271_attach anymore, since the tda18271_get_id function will call dbg_info with the same information and more. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6907): tda18271: create separate calc_pll functionsMichael Krufky
Consolidate duplicated code by creating functions: tda18271_calc_main_pll tda18271_calc_cal_pll Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6906): tda18271: rename tda18271_calc_* functions to tda18271_lookup_*Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6905): tda18271: check ID register during attachMichael Krufky
Identify the silicon during attach, return NULL if unsupported device. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6904): tda18271: divider byte 1, bit 7 is always 0Michael Krufky
Bit 7 of both Main Divider byte 1 and Cal Divider byte 1 is always zero. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6903): mt312: CodingStyle fixMatthias Schwarzott
Fixes all occurences of assignment in if checkpatch marks them as ERROR. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6894): xc5000: fix build warningMichael Krufky
Fix the following build warning: xc5000.c:560: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' On many architectrues size_t is unsigned long, and may not be printed with %d. Use %Zu instead. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6892): xc5000: fix build when DVB_TUNER_XC5000 is disabledMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6890): tda18271: fix typo in RF tracking filter calibrationMichael Krufky
We want to set bits 1 & 2 on easy programming byte 4, not extended byte 4. Thanks to David Wong for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: David Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6886): xc5000: Cleanups of types, result codes etcSteven Toth
This translates much of the xceive coding style, adds some result codes and generally cleans up whitespace and function arguments. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6884): Add support for the Xceive xc5000 silicon tunerSteven Toth
This is an all formats tuner, QAM, ATSC, DVB-T and others. Only ATSC and QAM have been tested. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6882): dvb_frontend: release analog demod in dvb_frontend_detachMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6881): include struct analog_demod_ops directly inside struct ↵Michael Krufky
dvb_frontend Rather than using a pointer, include struct analog_demod_ops directly inside struct dvb_frontend. This will allow us to use dvb_attach in the future, along with removing the need to check the ops structure before having to check the pointer to the method being called. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6880): kill tuner-driver.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6879): move struct analog_tuner_ops into dvb_frontend.hMichael Krufky
struct analog_tuner_ops no longer has any dependencies specific to v4l2, so we can move this into dvb_frontend.h with the rest of the tuning structures. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6874): removes duplicated KERN_DEBUG flags from dprintk calls in ↵Matthias Schwarzott
mt312.c do { \ if (debug) printk(KERN_DEBUG "mt312: " args); \ } while (0) So no caller need to specify KERN_DEBUG. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6873): Fixes issues listed by checkpatchMatthias Schwarzott
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6856): zl10353: improve tuning parameters and update register mapChris Pascoe
Some more I2C traces and a experimentation with register values on both the ZL10353 and MT352 mean that I can now guess at what more of the ZL10353 registers do. Guess at the registers' names (based on the equivalent names in MT352) and update set_parameters/get_parameters with the new knowledge. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6822): s5h1409: use VSB IF frequency ( 44 / 5.38 MHz ) unless ↵Michael Krufky
otherwise specified use VSB IF frequency ( 44 / 5.38 MHz ) if qam_if is invalid or unspecified Acked-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6821): s5h1409: fix IF frequency configurationMichael Krufky
On the s5h1409 demod, the IF frequency for VSB is limited to 44 / 5.38 MHz. Hardcode VSB IF frequency within the driver to 44 / 5.38 MHz. QAM IF frequency remains configurable via attach-time configuration. Acked-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6818): git-dvb: drivers/media/dvb/frontends/zl10353.c: avoid 64-bit ↵Andrew Morton
divide Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6808): git-dvb: fix build in drivers/media/dvb/frontends/tda18271.hAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6801): tda18271: pass i2c gate configuration into tda18271_attach()Michael Krufky
If we pass TDA18271_GATE_DIGITAL into tda18271_attach(), it will always try to use the digital demodulator's i2c gate. If we pass TDA18271_GATE_ANALOG into tda18271_attach(), it will always try to use the analog demodulator's i2c gate. If we pass TDA18271_GATE_AUTO into tda18271_attach(), it will try to use the analog demodulator's i2c gate when tuning in analog mode, and it will try to use the digital demodulator's i2c gate when tuning in digital mode. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6800): tda18271: use an enum rather than an integer to store analog ↵Michael Krufky
/ digital state Use an enum rather than an integer #define to store analog / digital state. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6745): tda18271: remove tuning offset for atsc/qamMichael Krufky
The tuning request coming in from userspace is already center adjusted, so we should not adjust to center (+1.75mhz) within the driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6728): tda18271: fix register dump formatMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6727): tda18271: convert table lookup loops to functionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6726): tda18271: set image rejection validityMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6725): tda18271: improve debug flexibilityMichael Krufky
converted debug module option to an or-able setting. 1 = info 2 = table map values 4 = register dumps Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6724): tda18271: remove duplicated codeMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6723): tda18271: only force init once during attachMichael Krufky
Once the image rejection calibration procedure has been successful, we should not initialize the tuner registers again. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6681): tda18271: rename 'debug' to 'tda18271_debug'Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6680): tda18271: move tda18271_map tables to a separate source fileMichael Krufky
Move tda18271_map tables to a separate source file, to improve code readability and ease maintenance. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6678): tda18271: define init callbackMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6659): Convert MTS to bitfieldMauro Carvalho Chehab
Xc2028.3028 has two type of firmwares: audio-standard specific ones and baseband MTS firmwares. MTS firmwares provide stereo decoding for 6 MHz BTSC/EIAJ and for monoaural audio decoding on 8 MHz firmwares. It seems that the option to use MTS or a standard-specific audio decoding depends on the way xc2028/3028 is connected. Instead of wasting 32 (or 64 bits) to signalize if the driver needs to use MTS firmware, this patch converts it to a bitfield that can be shared with other proprieties of xc2028/3028. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6656): zl10353: store frequencies in 0.1kHz to eliminate rounding ↵Chris Pascoe
errors Whilst reanalysing my formulas I realised it was no longer possible to get the right values for a 36.1667MHz IF due to rounding problems. Storing frequencies in units of 0.1kHz makes it possible to calculate these again correctly. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6655): Add support for MT352-based DViCO FusionHDTV DVB-T NANO devicesChris Pascoe
There are at least three variants of the DViCO FusionHDTV DVB-T NANO that share the same USB device ID. The first (ZL10353 w/ firmware in ROM) is already supported; the latter two both require firmware and have either an MT352 or ZL10353 demodulator, and have a different IR receiver from the first. This introduces a new identify_state that can tell the difference between a "warm" device which is running the embedded firmware, and a "cold" device that needs us to upload firmware to it before it will work. We patch the uploaded device ID (like we do for other bluebird devices) to make it easy to identify the particular device variant when it reattaches. NB: These devices use a different firmware file from previous bluebird devices. You need a new firmware file to make this work. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6654): mt352: support oversampled IF inputChris Pascoe
Rework the input frequency calculation so that it produces the right values when the ADC oversamples the IF input. This means MT352 devices can now process a near-zero IF (according to the, specs 4.57MHz is supported with the default crystal). Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6653): Add support for the DViCO FusionHDTV NANO2 w/ZL10353 and ↵Chris Pascoe
firmware Add support for the DViCO FusionHDTV DVB-T NANO with zl10353 demodulator and firmware in ROM on the device. Again, this is based on the great work of Mike Krufky with my modifications to use the in-tree XC2028 driver. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6649): Add support for the DViCO FusionHDTV Dual Digital 4Chris Pascoe
Add support for DViCO's Dual Digital 4 with xc3028 tuner, zl10353 DVB-T demodulator and a new-style I2C IR remote control receiver. This would not have been possible without the work of and advice from Mike Krufky, who originally got the Dual Digital 4 and second-gen DVB-T NANO devices working with the out-of-tree XC3028 driver. I converted it to use the in-tree XC3028 driver (after making it suitable for our use), and added the IR remote control support based on his advice. NB: a firmware package is required to use this device. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 15:33:14 +0000