summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends
AgeCommit message (Collapse)Author
2014-11-25[media] si2168: One function call less in si2168_init() after error detectionMarkus Elfring
GIT_AUTHOR_DATE=1416472767 The release_firmware() function was called in some cases by the si2168_init() function during error handling even if the passed variable contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] m88ds3103: One function call less in m88ds3103_init() after error ↵Markus Elfring
detection GIT_AUTHOR_DATE=1416472158 The release_firmware() function was called in some cases by the m88ds3103_init() function during error handling even if the passed variable contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] DVB-frontends: Deletion of unnecessary checks before the function ↵Markus Elfring
call "release_firmware" GIT_AUTHOR_DATE=1416472432 The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-25[media] si2168: TS clock inversion controlCrazyCat
TS clock polarity control implemented. [Antti: Resolved simple conflict] Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-21[media] rtl2832: implement option to bypass slave demod TSAntti Palosaari
Implement partial PIP mode to carry TS from slave demodulator, through that master demodulator. RTL2832 demod has TS input interface to connected another demodulator TS output. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: move to stagingAntti Palosaari
It is not ready enough to be released on mainline. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: convert to RegMap APIAntti Palosaari
Convert driver to I2C RegMap API. That offers unified register access routines, register value caching and more. We need 3 register maps, one for each register page, as chips has 3 I2C address. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: convert driver to I2C bindingAntti Palosaari
Driver was using DVB proprietary binding model. As it is I2C device, we could change it to normal kernel I2C driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: improve IF frequency and BW handlingAntti Palosaari
Separate IF and BW based registers. Add support for DVB-T and DVB-T2 6MHz channel bandwidth. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: implement DVB-T modeAntti Palosaari
Implement DVB-T mode. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: add support for DVB-T2Antti Palosaari
Add support for DVB-T2. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: Panasonic MN88473 DVB-T/T2/C demod driverAntti Palosaari
Only DVB-C is implemented. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: move to stagingAntti Palosaari
It is not ready enough to be released on mainline. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: implement DVB-T and DVB-T2Antti Palosaari
Implement initial support for DVB-T and DVB-T2 modes. Now driver has basic support for all the modes, DVB-C/T/T2. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: Convert driver to I2C RegMap APIAntti Palosaari
Convert driver to I2C RegMap API. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: convert driver to I2C clientAntti Palosaari
It uses I2C bus so better to implement it as a standard I2C driver model. It was using proprietary DVB binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: rename state to devAntti Palosaari
Rename state to dev. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: rename mn88472_c.c => mn88472.cAntti Palosaari
Original plan was to implement driver as one file per used demod standard (mn88472_c.c, mn88472_t.c and mn88472_t2.c). However, that plan was a mistake as driver code differences are so small between different standards. Due to that rename this file and implement all the needed functionality to that file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: add small delay to wait DVB-C lockAntti Palosaari
400ms delay seems to be enough in order to gain DVB-C lock. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: correct attach symbol nameAntti Palosaari
Wrong symbol name causes demod attach failure. Reported-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: Panasonic MN88472 demod driver (DVB-C only)Antti Palosaari
Only DVB-C mode is supported, DVB-T and DVB-T2 are not supported. Very much feature reduced version, no signal statistics nor normal chip configuration options. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] m88ds3103: change ts clock config for serial modenibble.max
1> When m88ds3103 works in serial ts mode, its serial ts clock is equal to ts master clock and the clock divider is bypassed. 2> The serial ts clock is configed by the bridge driver just like parallel ts clock. Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11Merge tag 'v3.18-rc4' into patchworkMauro Carvalho Chehab
Needed due to some important regression fixes at RC core. * commit 'v3.18-rc4': (587 commits) Linux 3.18-rc4 ARM: dts: zynq: Enable PL clocks for Parallella tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address USB: Update default usb-storage delay_use value in kernel-parameters.txt sysfs: driver core: Fix glue dir race condition by gdp_mutex MIPS: Fix build with binutils 2.24.51+ xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() USB: cdc-acm: add quirk for control-line state requests tty: Fix pty master poll() after slave closes v2 MIPS: R3000: Fix debug output for Virtual page number ... Conflicts: drivers/media/rc/rc-main.c
2014-11-05[media] cx24110: Simplify error handling at cx24110_set_fec()Mauro Carvalho Chehab
move the return to happen before the logic. This way, we can avoid one extra identation. This also fixes an identation issue on this function. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx23110: Fix return code for cx24110_set_fec()Mauro Carvalho Chehab
When a parameter is invalid, the right return code is -EINVAL. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx24110: Fix whitespaces at cx24110_set_fec()Mauro Carvalho Chehab
It is hard to read what's there, because it doesn't follow the CodingStyle. Add missing whitespaces to split function arguments. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx24110: Fix a spatch warningMauro Carvalho Chehab
This is actually a false positive: drivers/media/dvb-frontends/cx24110.c:210 cx24110_set_fec() error: buffer overflow 'rate' 7 <= 8 But fixing it is easy: just ensure that the table size will be limited to FEC_AUTO. While here, fix spacing on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx22700: Fix potential buffer overflowMauro Carvalho Chehab
As new FEC types were added, we need a check to avoid overflows: drivers/media/dvb-frontends/cx22700.c:172 cx22700_set_tps() error: buffer overflow 'fec_tab' 6 <= 6 drivers/media/dvb-frontends/cx22700.c:173 cx22700_set_tps() error: buffer overflow 'fec_tab' 6 <= 6 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] stb0899: don't go past DiSEqC msg bufferMauro Carvalho Chehab
As reported by spatch: drivers/media/dvb-frontends/stb0899_drv.c:720 stb0899_send_diseqc_msg() error: buffer overflow 'cmd->msg' 6 <= 7 The buffer size is 6 and not 8. Anyway, the best is to use sizeof(), to avoid such mistakes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] stv090x: Fix delivery system settingMauro Carvalho Chehab
As sparse complains: drivers/media/dvb-frontends/stv090x.c:3471:30: warning: mixing different enum types drivers/media/dvb-frontends/stv090x.c:3471:30: int enum fe_delivery_system versus drivers/media/dvb-frontends/stv090x.c:3471:30: int enum stv090x_delsys There's actually an error when setting the delivery system on stv090x_search(): it is using the DVBv5 macros as if they were the stv090x ones. Instead, we should convert between the two namespaces, returning an error if an unsupported delivery system is requested. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] af0933: Don't go past arraysMauro Carvalho Chehab
X-Patchwork-Delegate: m.chehab@samsung.com Fixes the following sparse warnings: drivers/media/dvb-frontends/af9033.c:295 af9033_init() error: buffer overflow 'clock_adc_lut' 11 <= 11 drivers/media/dvb-frontends/af9033.c:300 af9033_init() error: buffer overflow 'clock_adc_lut' 11 <= 11 drivers/media/dvb-frontends/af9033.c:584 af9033_set_frontend() error: buffer overflow 'coeff_lut' 3 <= 3 drivers/media/dvb-frontends/af9033.c:595 af9033_set_frontend() error: buffer overflow 'clock_adc_lut' 11 <= 11 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: continue polling unless critical IO errorAntti Palosaari
That case is not IO error, so better to jump out now, but still continue polling. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: return 0.1 dB DVBv3 SNR for AF9030 familyAntti Palosaari
Previous patch changed both AF9030 and IT9130 SNR reporting from dB to relative. Restore AF9030 to old behavior as it has been always returning 0.1 dB value. Leave IT9130 relative as old IT9130 was returning relative values. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix DVBv3 snr value not correct issueBimow Chen
Snr returns value not correct. Fix it. Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: improve read_signal_strength error handling slightlyAntti Palosaari
Check return status after each register access routine and avoid masking return status values. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix AF9033 DVBv3 signal strength measurementAntti Palosaari
Previous patch changes used signal strength firmware register from 0x800048 to 0x80004a in case of AF9033/AF9035 chip. In practice reported values were running upside-down, when RR strength increases reported value decreases and vice versa. That is because of 0x80004a returns values that are dBm scale, but negative RF strength dBm returned as positive number. 0x800048 returns 0-100, like percentage 0x80004a returns 0-255 dBm, without a negative sign So restore old measurement now. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix DVBv3 signal strength value not correct issueBimow Chen
Register 0x800048 is not dB measure but relative scale. Fix it and conform to NorDig specifications. Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] si2168: do not print device is warm every-time when openedAntti Palosaari
It repeated "found a 'Silicon Labs Si2168' in warm state" everytime when device was opened. Message is aimed to point out firmware is downloaded, up and running. So print it only in case firmware download is performed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] sp2: sp2_init() can be staticFengguang Wu
drivers/media/dvb-frontends/sp2.c:269:5: sparse: symbol 'sp2_init' was not declared. Should it be static? drivers/media/dvb-frontends/sp2.c:351:5: sparse: symbol 'sp2_exit' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] m88ds3103: add support for the demod of M88RS6000nibble.max
M88RS6000 is the integrated chip, which includes tuner and demod. Its internal demod is similar with M88DS3103 except some registers definition. The main different part of this internal demod from others is its clock/pll generation IP block sitting inside the tuner die. So clock/pll functions should be configed through its tuner i2c bus, NOT its demod i2c bus. The demod of M88RS6000 need the firmware: dvb-demod-m88rs6000.fw firmware download link: http://www.dvbsky.net/download/linux/dvbsky-firmware.tar.gz Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb:tc90522: fix always-false expressionAkihiro Tsukada
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb:tc90522: fix stats reportAkihiro Tsukada
* report the fixed per-transponder symbolrate instead of per-TS ones * add output TS-ID report Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] stv090x: remove indent levels in stv090x_get_coldlock()Dan Carpenter
This code is needlessly complicated and checkpatch.pl complains that we go over the 80 characters per line limit. If we flip the "if (!lock) {" test to "if (lock) return;" then we can remove an indent level from the rest of the function. We can add two returns in the "if (state->srate >= 10000000) {" condition and move the else statement back an additional indent level. There is another "if (!lock) {" check which can be removed since we have already checked "lock" and know it is zero at this point. This second check on "lock" is also a problem because it sets off a static checker warning. I have reviewed this code for some time to see if something else was intended, but have concluded that it was simply an oversight and should be removed. Removing this duplicative check gains us an third indent level. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] au8522: improve lock performance with ZeeVee modulatorsRichard Vollkommer
Improves lock performance with signals from the ZeeVee family of modulators. Signed-off-by: Richard Vollkommer <linux@hauppauge.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-frontends/Kconfig: better describe Toshiba TC90522ほち
Toshiba TC90522 is wrongly categorized, fix it Signed-off-by: ほち, AreMa Inc <knightrider@are.ma> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] ds3000: fix LNB supply voltage on Tevii S480 on initializationUlrich Eckhardt
The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not automatically power down. This blocks other receivers connected to a satellite channel router (EN50494), since the receivers can not send the required DiSEqC sequences when the Tevii card is connected to a the same SCR. This patch switches off the LNB supply voltage on initialization of the frontend. [mchehab@osg.samsung.com: add a comment about why we're explicitly turning off voltage at device init] Cc: stable@vger.kernel.org Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] sp2: improve debug loggingOlli Salonen
Improve debugging output. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] sp2: fix incorrect structOlli Salonen
Incorrect struct used in the SP2 driver. Reported-by: Max Nibble <nibble.max@gmail.com> Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] drxk: Fix debug printksMauro Carvalho Chehab
This patch partially reverts 0fb220f2a5cb. What happened is that the conversion of debug messages to use pr_debug() was a bad idea, because one needing to debug would need to both enable debug level via a modprobe parameter, and then to enable the dynamic printk's. So, for now, let's use printk() directly at dprintk(). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] dib7000p: get rid of an unused argumentMauro Carvalho Chehab
dib7000p is for DVB, and not ISDB. So, there's no layer. That removes this compilation warning: drivers/media/dvb-frontends/dib7000p.c:1972: warning: 'i' is used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 00:35:37 +0000