| Age | Commit message (Collapse) | Author |
|---|
|
Implement I2C client bindings.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement I2C client bindings.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/dvb-frontends/dib0090.c:1710 dib0090_dc_offset_calibration() warn: missing break? reassigning '*tune_state'
There's no need to change tune_state there, as the fall though code
will change it again to another state. So, simplify it by
removing the dead code.
While here, fix a typo:
Sart => Start
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/dvb-frontends/drxk_hard.c:3277 dvbt_sc_command() warn: missing break? reassigning 'status'
This is basically because the error handling logic there was crappy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We need own I2C locking because of tuner I2C adapter/repeater.
Firmware command is executed using I2C send + reply message. Default
I2C adapter locking protects only single I2C operation, not whole
send + reply sequence as needed. Due to that, it was possible tuner
I2C message interrupts firmware command sequence.
Reported-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement I2C client device binding.
Wrap media attach to driver I2C probe.
Add wrapper from m88ds3103_attach() to m88ds3103_probe() via driver
core in order to provide proper I2C client for legacy media attach
binding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use jiffies to set timeout for DiSEqC TX ready polling. Using jiffies
is more elegant solution than looping N times with sleep.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement DVBv5 BER statistics.
Wrap legacy DVBv3 BER to DVBv5 BER.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Implement DVBv5 CNR statistics.
Wrap legacy DVBv3 SNR to DVBv5 CNR.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Do not return error from get_frontend() when status is queried, but
the frontend didn't lock yet. The proper behavior is to only update the
cache after having a lock.
[mchehab@osg.samsung.com: fix the patch description]
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/dvb-frontends/cx24120.c:837:6: warning: symbol 'cx24120_calculate_ber_window' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The ucblocks register is probably a counter and not a rate; assume
it is so and change the calculations as required.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This code works fine but static checkers complain. The test_bit()
function takes the bit number and not a mask. Then the other issue is
that we were using USB_STATE_URB_BUF which is BIT(0) instead of URB_BUF.
Also we were open coding that instead of using the test/clear/set_bit()
functions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Remove multiple blank likes.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
These state vars are used for more than just ber calculation, also
fix typo.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
BER & UCB aren't available unless we're locked; don't update dvbv5
stats when not locked and mark these counters as unavailable.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support
modern applications. So, implement UCB using dvbv5.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Instead of reading BER again for DVBv3 call, use the value from the cache.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support
modern applications. So, implement BER using dvbv5.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use const on the static data, as gcc may optimize better the
code. Also, would prevent that some code would override the
data there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
|
|
drivers/media/dvb-frontends/cx24120.c:1182:5: warning: no previous prototype for 'cx24120_init' [-Wmissing-prototypes]
int cx24120_init(struct dvb_frontend *fe)
^
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
|
|
As reported by smatch:
drivers/media/dvb-frontends/cx24120.c: In function 'cx24120_message_send':
drivers/media/dvb-frontends/cx24120.c:368:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret, ficus;
^
The values written by cx24120 are never checked. So, remove the
check here too. That's said, the best would be to do the reverse,
but globally: to properly handle the error codes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
|
|
Add in all the likely values for setting fec on tuning. Some values
yet to be tested but very likely to be correct.
In the very unlikely event that these are wrong tuning with
FEC_AUTO will still work.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Remove reg1 by refactoring for loops
Change ret into an int as it's only used for return values now,
and remove reset_result by using ret instead.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Use reg instead of ret for all calls to readreg, remove ret_EA
as it doesn't need to be a separate var anymore.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Probably a remnant of this driver being reverse engineered,
cx24120_init assigned ret on each call to writereg - they're not
used for anything so remove them to clear up the codebase.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Remove __func__ from calls to dev_dbg as dynamic debug can add in
the function name anyway.
Remove debug call in dvbv3 read_signal_strength as userspace has
this value anyway.
Reword some strings to make them simpler / more obvious.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Better to report CNR via DVBv5 stats, as scale can be used.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Previous version of this driver had a memset before every call
to cmd. This meant the default value of cmd.arg[1] was zero unless
burst is set. Make sure it remains zero.
Also fe_sec_mini_cmd_t is an enum, so test against it.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Algorithm copied from cx24117.c - it seems to work. Showing 95% on
a signal I know to be somewhere around 74dBuV.
[mchehab@osg.samsung.net: merged two patches, to avoid breaking compilation]
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patch changes DVBv3 signal strength to read from the cache by
moving the signal strength reading routine into get_stat, and
reducing read_signal_strength to just returning the cached value.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
get_frontend was making a call to read_status, which is being
called periodically anyway. Have read_status store fe_status in
the state struct instead and use that within get_frontend.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Previous patch added in collection, this patch enables them by
signalling they are available.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add new get_stats function, called from read_status, for
collecting DVBv5 stats into the frontend cache. Only signal
strength for now, can add others later.
Not currently marked as available, future patch will enable.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Change calculate_vco function to send_vco to tidy up cx24120_init
function.
xxyyzz variable is remnants of a manual div & remainder codepath
to perform a u64 rounded div; replace with kernel macro
DIV_ROUND_CLOSEST_ULL
Hex values provided to the message are mainly variables calculated
within this function, replace with these to remove hardcoding.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
msg.len has been ++'d so msg.len is one too many.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patch adds in a missing command to cx24120_check_cmd. This part
of the old reverse engineered driver was quite hard to follow - it's
presumed the compiler did some neat optimisation that wasn't easy to
decode. This command was checked for in that version but not copied
across to the new switch statement.
For reference, old reverse engineered code:
xxzz = cmd->id - 0x11; // look for specific message id
if ( xxzz <= 0x13 ) {
msg_cmd_mask = 1 << xxzz;
//0x0F8021 // if cmd_id 17 or 22 or 33-36, 42, 47, 57-61 etc. disable mpeg output
if ( msg_cmd_mask & 0x0F8021 ) { // 000011111000000000100001b
cx24120_msg_mpeg_output_global_config(state, 0);
msleep(100);
state->dvb_s2_mode &= 0xFD; // reset mpeg out enable flag
}
}
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patch removes the requirement of waiting for tune in
set_frontend by moving the clock set call into read_status
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patch changes DVB-S/DVB-S2 to the more commonly used
DVB-S/S2 in the description for DVB_CX24120
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patches fixes all checkpatch-errors.
Even the ones created --strict.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Mauro pointed out some coding style issues in his review.
This patch fixes them.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Some i2c-hosts are quite limited regarding maximum
i2c-burst-write-sizes. This patch makes the previously
hardcoded field configurable by users of the driver.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patch fixes printk-related checkpatch warnings. All printks
have been converted to pr_warn or pr_info or pr_err.
Signed-off-by: Patrick.Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This patch adds support for the Technisat Skystar S2 - this
has been tried before but the cx24120 driver was a bit out of shape
and it didn't got any further:
https://patchwork.linuxtv.org/patch/10575/
It is an old card, but currently being sold off for next to nothing,
so it's proving quite popular of late. Noticing it's quite similar
to the cx24116 and cx24117 I've rewritten the driver in a similar way.
There were a few registers and commands from those drivers
missing from this one I've tested out and found they do something so
they've been added in to speed up tuning and to make get_frontend
return something useful.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick.Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add initial support for fc2580 tuner based devices.
Tuner is controlled via V4L2 subdevice API.
Passes v4l2-compliance tests.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add reg/val inittab for FC2580 tuner.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner.
It's based on the following components:
- USB bridge: RTL2832P (contains also DVB-T demodulator)
- Demodulator: Si2168-A30
- Tuner: Si2148-A20
The demodulator and the tuner will need firmwares. The Si2148 uses Si2158
firmware. Antti has the firmwares available for download:
http://palosaari.fi/linux/v4l-dvb/firmware/
Do note that for DVB-T either of the demodulators can be used. DVB-C and
DVB-T2 are only supported by the Si2168 demodulator. The driver will
register 2 frontends for the same adapter. Frontend 0 will be the RTL2832
demodulator and frontend 1 will be the Si2168 demodulator. The same
tuner is used for both.
As a consequence of the above, it's recommended to use application that
does implement proper DVBv5 support.
For some reason, the old I2C write method sporadically fails. Thus the
need for an option to only use the new I2C write method supported by the
RTL2832.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Return error from si2168_cmd_execute in case the demodulator returns an
error.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add a parameter in si2168_config to support gapped clock. This might be
necessary on some devices with higher bitrates.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
