| Age | Commit message (Collapse) | Author |
|---|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- videobuf2 was moved to a media/common dir, as it is now used by the
DVB subsystem too
- Digital TV core memory mapped support interface
- new sensor driver: ov7740
- several improvements at ddbridge driver
- new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
SoCs
- new tuner driver: tda18250
- finally got rid of all LIRC staging drivers
- as we don't have old lirc drivers anymore, restruct the lirc device
code
- add support for UVC metadata
- add a new staging driver for NVIDIA Tegra Video Decoder Engine
- DVB kAPI headers moved to include/media
- synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
for non-legacy APIs
- reduce the kAPI gap for V4L2
- lots of other driver enhancements, cleanups, etc.
* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
media: v4l2-compat-ioctl32.c: avoid sizeof(type)
media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
media: v4l2-compat-ioctl32.c: fix the indentation
media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
media: vivid: fix module load error when enabling fb and no_error_inj=1
media: dvb_demux: improve debug messages
media: dvb_demux: Better handle discontinuity errors
media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
media: ts2020: avoid integer overflows on 32 bit machines
media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
media: entity: Add a nop variant of media_entity_cleanup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
|
|
Do some cleanup of debug messages, making them cleaner and
easier to be used to analyze what's going on.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
When a packet discontinuity happens, it is not just the payload
that was lost. The headers are lost too. So, the max size is not
184 but, instead 188.
Also, while printing warnings, make a distinction between
MPEG-TS indicated discontinuity and detected one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
There are a lot of places where sequences of space/tabs are
found. Get rid of all spaces before tabs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
On several places, whitespaces are being used for indentation,
or even at the end of the line.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Instead of using strncpy(), use strlcpy(), in order to
ensure that a \0 char will be added at the end of the
string.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Except for DVB, all media kAPI headers are at include/media.
Move the headers to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The "reserved" field was a way, used at V4L2 API, to add new
data to existing structs without breaking userspace. However,
there are now clever ways of doing that, without needing to add
an uneeded overhead. So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This API is still experimental. Make it optional, allowing to
compile the code without it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This code is released under GPL. Add the corresponding SPDX
headers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
if the number of buffers requested by the user is too big, the
VB core will truncate to a valid value.
Use it, instead of what the user requested.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
It is not a good idea to let users to request a very high buffer
size.
So, add an upper limit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The streamoff logic is causing those warnings:
WARNING: CPU: 3 PID: 3382 at drivers/media/v4l2-core/videobuf2-core.c:1652 __vb2_queue_cancel+0x177/0x250 [videobuf2_core]
Modules linked in: bnep fuse xt_CHECKSUM iptable_mangle tun ebtable_filter ebtables ip6table_filter ip6_tables xt_physdev br_netfilter bluetooth bridge rfkill ecdh_generic stp llc nf_log_ipv4 nf_log_common xt_LOG xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c sunrpc vfat fat snd_hda_codec_hdmi rc_dib0700_nec i915 rc_pinnacle_pctv_hd em28xx_rc a8293 ts2020 m88ds3103 i2c_mux em28xx_dvb dib8000 dvb_usb_dib0700 dib0070 dib7000m dib0090 dvb_usb dvb_core uvcvideo snd_usb_audio videobuf2_v4l2 dib3000mc videobuf2_vmalloc videobuf2_memops dibx000_common videobuf2_core rc_core snd_usbmidi_lib snd_rawmidi em28xx tveeprom v4l2_common videodev media intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel
kvm_intel snd_hda_codec kvm snd_hwdep snd_hda_core snd_seq irqbypass crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel snd_seq_device drm_kms_helper snd_pcm intel_cstate intel_uncore snd_timer tpm_tis drm mei_wdt iTCO_wdt iTCO_vendor_support tpm_tis_core snd intel_rapl_perf mei_me mei tpm i2c_i801 soundcore lpc_ich video binfmt_misc hid_logitech_hidpp hid_logitech_dj e1000e crc32c_intel ptp pps_core analog gameport joydev
CPU: 3 PID: 3382 Comm: lt-dvbv5-zap Not tainted 4.14.0+ #3
Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0048.2017.0506.1545 05/06/2017
task: ffff94b93bbe1e40 task.stack: ffffb7a98320c000
RIP: 0010:__vb2_queue_cancel+0x177/0x250 [videobuf2_core]
RSP: 0018:ffffb7a98320fd40 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff94b92ff72428 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff94b92ff72428
RBP: ffffb7a98320fd68 R08: ffff94b92ff725d8 R09: ffffb7a98320fcc8
R10: ffff94b978003d98 R11: ffff94b92ff72428 R12: ffff94b92ff72428
R13: 0000000000000282 R14: ffff94b92059ae20 R15: dead000000000100
FS: 0000000000000000(0000) GS:ffff94b99e380000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555953007d70 CR3: 000000012be09004 CR4: 00000000001606e0
Call Trace:
vb2_core_streamoff+0x28/0x90 [videobuf2_core]
dvb_vb2_stream_off+0xd1/0x150 [dvb_core]
dvb_dvr_release+0x114/0x120 [dvb_core]
__fput+0xdf/0x1e0
____fput+0xe/0x10
task_work_run+0x94/0xc0
do_exit+0x2dc/0xba0
do_group_exit+0x47/0xb0
SyS_exit_group+0x14/0x20
entry_SYSCALL_64_fastpath+0x1a/0xa5
RIP: 0033:0x7f775e931ed8
RSP: 002b:00007fff07019d68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000001d02690 RCX: 00007f775e931ed8
RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
RBP: 00007fff0701a500 R08: 00000000000000e7 R09: ffffffffffffff70
R10: 00007f775e854dd8 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000035fa000 R14: 000000000000000a R15: 000000000000000a
Code: 00 00 04 74 1c 44 89 e8 49 83 c5 01 41 39 84 24 88 01 00 00 77 8a 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 89 df e8 bb fd ff ff eb da <0f> ff 41 8b b4 24 88 01 00 00 85 f6 74 34 bb 01 00 00 00 eb 10
There are actually two issues here:
1) list_del() should be called when changing the buffer state;
2) The logic with marks the buffers as done is at the wrong place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Adds a new uAPI for DVB to use streaming I/O which is implemented
based on videobuf2, using those new ioctls:
- DMX_REQBUFS: Request kernel to allocate buffers which count and size
are dedicated by user.
- DMX_QUERYBUF: Get the buffer information like a memory offset which
will mmap() and be shared with user-space.
- DMX_EXPBUF: Just for testing whether buffer-exporting success or not.
- DMX_QBUF: Pass the buffer to kernel-space.
- DMX_DQBUF: Get back the buffer which may contain TS data.
Originally developed by: Junghak Sung <jh1009.sung@samsung.com>, as
seen at:
https://patchwork.linuxtv.org/patch/31613/
https://patchwork.kernel.org/patch/7334301/
The original patch was written before merging VB2-core functionalities
upstream. When such series was added, several adjustments were made,
fixing some issues with V4L2, causing the original patch to be
non-trivially rebased.
After rebased, a few bugs in the patch were fixed. The patch was
also enhanced it and polling functionality got added.
The main changes over the original patch are:
dvb_vb2_fill_buffer():
- Set the size of the outgoing buffer after while loop using
vb2_set_plane_payload;
- Added NULL check for source buffer as per normal convention
of demux driver, this is called twice, first time with valid
buffer second time with NULL pointer, if its not handled,
it will result in crash
- Restricted spinlock for only list_* operations
dvb_vb2_init():
- Restricted q->io_modes to only VB2_MMAP as its the only
supported mode
dvb_vb2_release():
- Replaced the && in if condiion with &, because otherwise
it was always getting satisfied.
dvb_vb2_stream_off():
- Added list_del code for enqueud buffers upon stream off
dvb_vb2_poll():
- Added this new function in order to support polling
dvb_demux_poll() and dvb_dvr_poll()
- dvb_vb2_poll() is now called from these functions
- Ported this patch and latest videobuf2 to lower kernel versions and
tested auto scan.
Co-developed-by: Junghak Sung <jh1009.sung@samsung.com>
[mchehab@s-opensource.com: checkpatch fixes]
Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This commit adds a new property DTV_SCRAMBLING_SEQUENCE_INDEX.
This 18 bit field, when present, carries the index of the DVB-S2 physical
layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.
There is no explicit signalling method to convey scrambling sequence index
to the receiver. If S2 satellite delivery system descriptor is available
it can be used to read the scrambling sequence index (EN 300 468 table 41).
By default, gold scrambling sequence index 0 is used. The valid scrambling
sequence index range is from 0 to 262142.
Increase the DVB API version in order userspace to be aware of the changes.
Signed-off-by: Athanasios Oikonomou <athoik@gmail.com>
Acked-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
pr_debug() and netdev_dbg() can be enabled/disabled dynamically
via sysfs. So, stop hidding them under ULE_DEBUG config macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This debug option is there for a long time, but it is only
enabled by editing the source code. Due to that, a breakage
inside its code was only noticed years after a change at
the ULE handling logic.
Make it a Kconfig parameter, as it makes easier for
advanced users to enable, and allow test if the compilation
won't be broken in the future.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
commit efb9ab67255f ("[media] dvb_net: prepare to split a very
complex function") changed the ULE handling logic, simplifying it.
However, it forgot to keep the initialization for .priv and to
zero .ule_hist fields.
The lack of .priv cause crashes if dvb_net_ule() is called, as
the function assuems that .priv field to be initialized.
With regards to .ule_hist, the current logic is broken and don't
even compile if ULE_DEBUG. Fix it by making the debug vars static
again, and be sure to pass iov parameter to dvb_net_ule_check_crc().
Fixes: efb9ab67255f ("[media] dvb_net: prepare to split a very complex function")
Suggested-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are some nested structs on this header, with aren't
properly document them.
This should solve some warnings after the addition of
a patche at kernel-doc adding support for nested structs/unions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are some nested structs on this header, with aren't
properly document them.
This should solve some warnings after the addition of
a patche at kernel-doc adding support for nested structs/unions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Currently a user can pass in an unsanitized slot number which
will lead to and out of range index into ca->slot_info. Fix this
by checking that the slot number is no more than the allowed
maximum number of slots. Seems that this bug has been in the driver
forever.
Detected by CoverityScan, CID#139381 ("Untrusted pointer read")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Mygica T230 DVB-T/T2/C USB stick support. It uses the same FX2/Si2168
bridge/demodulator combo as the other devices supported by the driver,
but uses the Si2141 tuner.
Several DVB-T (MPEG2) and DVB-T2 (H.265) channels were tested, as well as
the included remote control.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The dtv_properties structure and the dtv_property structure are
different sizes in 32-bit and 64-bit system. This patch provides
FE_SET_PROPERTY and FE_GET_PROPERTY ioctl commands implementation for
32-bit user space applications.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Adds compat_ioctl for 32-bit user space applications on a 64-bit system.
[m.chehab@osg.samsung.com: add missing include compat.h]
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Adds unlocked ioctl function directly in dvb_frontend.c instead of using
dvb_generic_ioctl().
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
drivers/media/dvb-core/dvb_frontend.c:154:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.
NULL check before some freeing functions is not needed.
Based on checkpatch warning
"kfree(NULL) is safe this check is probably not required"
and kfreeaddr.cocci by Julia Lawall.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Fixes: b1cb7372fa82 ("dvb_frontend: don't use-after-free the frontend struct")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Xbox One Digital TV Tuner is a low-cost USB 2.0 multistandard TV tuner. It supports DVB-T, DVB-T2 and DVB-C broadcast standards.
USB bridge: DibCom 0700C
Demodulator: Panasonic MN88472
Tuner: TDA18250BHN
The demodulator requires firmware. Download one from here:
http://palosaari.fi/linux/v4l-dvb/firmware/MN88472/02/latest/
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The correct error code when a function is not defined is
-ENOTSUPP. It was typoed wrong as -EOPNOTSUPP, with,
unfortunately, exists, but it is not used by the DVB core.
Thanks-to: Geert Uytterhoeven <geert@linux-m68k.org>
Thanks-to: Arnd Bergmann <arnd@arndb.de>
To make me revisit this code.
Fixes: a9cb97c3e628 ("media: dvb_frontend: be sure to init dvb_frontend_handle_ioctl() return code")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
As smatch warned:
drivers/media/dvb-core/dvb_frontend.c:2468 dvb_frontend_handle_ioctl() error: uninitialized symbol 'err'.
The ioctl handler actually got a regression here: before changeset
d73dcf0cdb95 ("media: dvb_frontend: cleanup ioctl handling logic"),
the code used to return -EOPNOTSUPP if an ioctl handler was not
implemented on a driver. After the change, it may return a random
value.
Fixes: d73dcf0cdb95 ("media: dvb_frontend: cleanup ioctl handling logic")
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Tested-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The comments that start with "/**" aren't kernel-doc stuff.
So, just start them with "/*".
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There were some troubles there:
drivers/media/dvb-core/dvb_frontend.c:379: warning: No description found for parameter 'fe'
drivers/media/dvb-core/dvb_frontend.c:379: warning: No description found for parameter 'check_wrapped'
drivers/media/dvb-core/dvb_frontend.c:1265: warning: No description found for parameter 'p_out'
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Building the driver with gcc 7.2.1 and:
make ARCH=i386 CF=-D__CHECK_ENDIAN__ CONFIG_DEBUG_SECTION_MISMATCH=y W=1 CHECK='' M=drivers/media
now produces a lot of warnings:
drivers/media/dvb-core/dvb_ca_en50221.c:233: warning: No description found for parameter 'ca'
drivers/media/dvb-core/dvb_ca_en50221.c:233: warning: No description found for parameter 'slot'
drivers/media/dvb-core/dvb_ca_en50221.c:284: warning: No description found for parameter 'timeout_hz'
drivers/media/dvb-core/dvb_ca_en50221.c:284: warning: Excess function parameter 'timeout_ms' description in 'dvb_ca_en50221_wait_if_status'
drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: No description found for parameter 'tuple_type'
drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: No description found for parameter 'tuple_length'
drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: Excess function parameter 'tupleType' description in 'dvb_ca_en50221_read_tuple'
drivers/media/dvb-core/dvb_ca_en50221.c:409: warning: Excess function parameter 'tupleLength' description in 'dvb_ca_en50221_read_tuple'
drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: No description found for parameter 'buf'
drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: No description found for parameter 'bytes_write'
drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: Excess function parameter 'ebuf' description in 'dvb_ca_en50221_write_data'
drivers/media/dvb-core/dvb_ca_en50221.c:795: warning: Excess function parameter 'count' description in 'dvb_ca_en50221_write_data'
drivers/media/dvb-core/dvb_ca_en50221.c:942: warning: No description found for parameter 'pubca'
drivers/media/dvb-core/dvb_ca_en50221.c:942: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_camchange_irq'
drivers/media/dvb-core/dvb_ca_en50221.c:970: warning: No description found for parameter 'pubca'
drivers/media/dvb-core/dvb_ca_en50221.c:970: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_camready_irq'
drivers/media/dvb-core/dvb_ca_en50221.c:990: warning: No description found for parameter 'pubca'
drivers/media/dvb-core/dvb_ca_en50221.c:990: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_frda_irq'
drivers/media/dvb-core/dvb_ca_en50221.c:1304: warning: No description found for parameter 'data'
drivers/media/dvb-core/dvb_ca_en50221.c:1348: warning: No description found for parameter 'parg'
drivers/media/dvb-core/dvb_ca_en50221.c:1348: warning: Excess function parameter 'inode' description in 'dvb_ca_en50221_io_do_ioctl'
drivers/media/dvb-core/dvb_ca_en50221.c:1348: warning: Excess function parameter 'arg' description in 'dvb_ca_en50221_io_do_ioctl'
drivers/media/dvb-core/dvb_ca_en50221.c:1432: warning: Excess function parameter 'inode' description in 'dvb_ca_en50221_io_ioctl'
drivers/media/dvb-core/dvb_ca_en50221.c:1544: warning: No description found for parameter 'ca'
drivers/media/dvb-core/dvb_ca_en50221.c:1544: warning: No description found for parameter 'result'
drivers/media/dvb-core/dvb_ca_en50221.c:1544: warning: No description found for parameter '_slot'
drivers/media/dvb-core/dvb_ca_en50221.c:1849: warning: No description found for parameter 'pubca'
drivers/media/dvb-core/dvb_ca_en50221.c:1849: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_init'
drivers/media/dvb-core/dvb_ca_en50221.c:1936: warning: No description found for parameter 'pubca'
drivers/media/dvb-core/dvb_ca_en50221.c:1936: warning: Excess function parameter 'ca_dev' description in 'dvb_ca_en50221_release'
drivers/media/dvb-core/dvb_ca_en50221.c:1936: warning: Excess function parameter 'ca' description in 'dvb_ca_en50221_release'
Trivially fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Documentation for digital TV (both kAPI and uAPI) are now in sync
with the implementation (except for legacy/deprecated ioctls). This
is a major step, as there were always a gap there
- New sensor driver: imx274
- New cec driver: cec-gpio
- New platform driver for rockship rga and tegra CEC
- New RC driver: tango-ir
- Several cleanups at atomisp driver
- Core improvements for RC, CEC, V4L2 async probing support and DVB
- Lots of drivers cleanup, fixes and improvements.
* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
dvb_frontend: don't use-after-free the frontend struct
media: dib0700: fix invalid dvb_detach argument
media: v4l2-ctrls: Don't validate BITMASK twice
media: s5p-mfc: fix lockdep warning
media: dvb-core: always call invoke_release() in fe_free()
media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
media: au0828: make const array addr_list static
media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
media: drxd: make const array fastIncrDecLUT static
media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
media: ddbridge: fix build warnings
media: av7110: avoid 2038 overflow in debug print
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: v4l: async: fix unregister for implicitly registered sub-device notifiers
media: v4l: async: fix return of unitialized variable ret
media: imx274: fix missing return assignment from call to imx274_mode_regs
media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
media: atomisp: make function calls cleaner
media: atomisp: get rid of storage_class.h
media: atomisp: get rid of wrong stddef.h include
...
|
|
dvb_frontend_invoke_release() may free the frontend struct.
So, the free logic can't update it anymore after calling it.
That's OK, as __dvb_frontend_free() is called only when the
krefs are zeroed, so nobody is using it anymore.
That should fix the following KASAN error:
The KASAN report looks like this (running on kernel 3e0cc09a3a2c40ec1ffb6b4e12da86e98feccb11 (4.14-rc5+)):
==================================================================
BUG: KASAN: use-after-free in __dvb_frontend_free+0x113/0x120
Write of size 8 at addr ffff880067d45a00 by task kworker/0:1/24
CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc5-43687-g06ab8a23e0e6 #545
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
print_address_description+0x78/0x280 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351
kasan_report+0x23d/0x350 mm/kasan/report.c:409
__asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435
__dvb_frontend_free+0x113/0x120 drivers/media/dvb-core/dvb_frontend.c:156
dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
__device_release_driver drivers/base/dd.c:861
device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
device_release_driver+0x1e/0x30 drivers/base/dd.c:918
bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
device_del+0x5c4/0xab0 drivers/base/core.c:1985
usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
hub_port_connect drivers/usb/core/hub.c:4754
hub_port_connect_change drivers/usb/core/hub.c:5009
port_event drivers/usb/core/hub.c:5115
hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
worker_thread+0x221/0x1850 kernel/workqueue.c:2253
kthread+0x363/0x440 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Allocated by task 24:
save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772
kmalloc ./include/linux/slab.h:493
kzalloc ./include/linux/slab.h:666
dtt200u_fe_attach+0x4c/0x110 drivers/media/usb/dvb-usb/dtt200u-fe.c:212
dtt200u_frontend_attach+0x35/0x80 drivers/media/usb/dvb-usb/dtt200u.c:136
dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286
dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86
dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162
dvb_usb_device_init+0xf73/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277
dtt200u_usb_probe+0xa1/0xe0 drivers/media/usb/dvb-usb/dtt200u.c:155
usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
really_probe drivers/base/dd.c:413
driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
__device_attach+0x26b/0x3c0 drivers/base/dd.c:710
device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
device_add+0xd0b/0x1660 drivers/base/core.c:1835
usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
really_probe drivers/base/dd.c:413
driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
__device_attach+0x26b/0x3c0 drivers/base/dd.c:710
device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
device_add+0xd0b/0x1660 drivers/base/core.c:1835
usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
hub_port_connect drivers/usb/core/hub.c:4903
hub_port_connect_change drivers/usb/core/hub.c:5009
port_event drivers/usb/core/hub.c:5115
hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
worker_thread+0x221/0x1850 kernel/workqueue.c:2253
kthread+0x363/0x440 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Freed by task 24:
save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459
kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524
slab_free_hook mm/slub.c:1390
slab_free_freelist_hook mm/slub.c:1412
slab_free mm/slub.c:2988
kfree+0xf6/0x2f0 mm/slub.c:3919
dtt200u_fe_release+0x3c/0x50 drivers/media/usb/dvb-usb/dtt200u-fe.c:202
dvb_frontend_invoke_release.part.13+0x1c/0x30 drivers/media/dvb-core/dvb_frontend.c:2790
dvb_frontend_invoke_release drivers/media/dvb-core/dvb_frontend.c:2789
__dvb_frontend_free+0xad/0x120 drivers/media/dvb-core/dvb_frontend.c:153
dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176
dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803
dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340
dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116
dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132
dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295
usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423
__device_release_driver drivers/base/dd.c:861
device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893
device_release_driver+0x1e/0x30 drivers/base/dd.c:918
bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565
device_del+0x5c4/0xab0 drivers/base/core.c:1985
usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170
usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124
hub_port_connect drivers/usb/core/hub.c:4754
hub_port_connect_change drivers/usb/core/hub.c:5009
port_event drivers/usb/core/hub.c:5115
hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195
process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119
worker_thread+0x221/0x1850 kernel/workqueue.c:2253
kthread+0x363/0x440 kernel/kthread.c:231
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
The buggy address belongs to the object at ffff880067d45500
which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 1280 bytes inside of
2048-byte region [ffff880067d45500, ffff880067d45d00)
The buggy address belongs to the page:
page:ffffea00019f5000 count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 0000000000000000 0000000000000000 00000001000f000f
raw: dead000000000100 dead000000000200 ffff88006c002d80 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880067d45900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880067d45980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880067d45a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880067d45a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880067d45b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: ead666000a5f ("media: dvb_frontend: only use kref after initialized")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Follow-up to: ead666000a5f ("media: dvb_frontend: only use kref after initialized")
The aforementioned commit fixed refcount OOPSes when demod driver attaching
succeeded but tuner driver didn't. However, the use count of the attached
demod drivers don't go back to zero and thus couldn't be cleanly unloaded.
Improve on this by calling dvb_frontend_invoke_release() in
__dvb_frontend_free() regardless of fepriv being NULL, instead of returning
when fepriv is NULL. This is safe to do since _invoke_release() will check
for passed pointers being valid before calling the .release() function.
[mchehab@s-opensource.com: changed the logic a little bit to reduce
conflicts with another bug fix patch under review]
Fixes: ead666000a5f ("media: dvb_frontend: only use kref after initialized")
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Conflicts:
include/linux/compiler-clang.h
include/linux/compiler-gcc.h
include/linux/compiler-intel.h
include/uapi/linux/stddef.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: devendra sharma <devendra.sharma9091@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
READ_ONCE()/WRITE_ONCE()
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't handle comments, leaving references
to ACCESS_ONCE() instances which have been removed. As a preparatory
step, this patch converts the DVB ringbuffer code and comments to use
{READ,WRITE}_ONCE() consistently.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-6-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
* commit '3728e6a255b5': (904 commits)
Linux 4.14-rc5
x86/microcode: Do the family check first
locking/lockdep: Disable cross-release features for now
x86/mm: Flush more aggressively in lazy TLB mode
mm, swap: use page-cluster as max window of VMA based swap readahead
mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lock
kmemleak: clear stale pointers from task stacks
fs/binfmt_misc.c: node could be NULL when evicting inode
fs/mpage.c: fix mpage_writepage() for pages with buffers
linux/kernel.h: add/correct kernel-doc notation
tty: fall back to N_NULL if switching to N_TTY fails during hangup
Revert "vmalloc: back off when the current task is killed"
mm/cma.c: take __GFP_NOWARN into account in cma_alloc()
scripts/kallsyms.c: ignore symbol type 'n'
userfaultfd: selftest: exercise -EEXIST only in background transfer
mm: only display online cpus of the numa node
mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk().
mm/mempolicy: fix NUMA_INTERLEAVE_HIT counter
include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OF
mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORK
...
|
|
changeset 6bbf7a855d20 ("media: dvbdev: convert DVB device types into an enum")
added a new warning on gcc 6:
>> drivers/media/dvb-core/dvbdev.c:86:1: warning: control reaches end of non-void function [-Wreturn-type]
That's because gcc is not smart enough to see that all types are
present at the switch. Also, the current code is not too optimized.
So, replace it to a more optimized one, based on a static table.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 6bbf7a855d20 ("media: dvbdev: convert DVB device types into an enum")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Fix a bunch of coding style issues found by checkpatch on the
part of the code that the previous patches touched.
WARNING: please, no space before tabs
+ * ^I^Icallback.$
ERROR: space required before the open parenthesis '('
+ switch(cmd) {
WARNING: line over 80 characters
+ err = dtv_property_process_get(fe, &getp, tvp + i, file);
WARNING: line over 80 characters
+ err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg);
ERROR: "(foo*)" should be "(foo *)"
+ err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg);
WARNING: line over 80 characters
+ err = fe->ops.read_signal_strength(fe, (__u16 *) parg);
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
That's the last DVB kAPI that misses documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Despite being used by DVB drivers, this header was not documented.
Document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The functions used on dvb_demux.h are largely used on DVB drivers.
Yet, none of them are documented.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are three structs defined inside dvb_demux.h. None
of them are currently documented.
Add documentation for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
