summaryrefslogtreecommitdiff
path: root/drivers/media/common
AgeCommit message (Collapse)Author
2018-12-25Merge tag 'media/v4.20-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: "The Intel IPU3 camera driver" * tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits) media: staging/ipu3-imgu: Add MAINTAINERS entry media: staging/ipu3-imgu: Address documentation comments media: v4l: Add Intel IPU3 meta buffer formats media: doc-rst: Add Intel IPU3 documentation media: ipu3-imgu: Fix firmware binary location media: ipu3-imgu: Fix compiler warnings media: staging/intel-ipu3: Add dual pipe support media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI media: staging/intel-ipu3: Add imgu top level pci device driver media: staging/intel-ipu3: Add v4l2 driver based on media framework media: staging/intel-ipu3: Add css pipeline programming media: staging/intel-ipu3: css: Initialize css hardware media: staging/intel-ipu3: css: Compute and program ccs media: staging/intel-ipu3: css: Add static settings for image pipeline media: staging/intel-ipu3: css: Add support for firmware management media: staging/intel-ipu3: css: Add dma buff pool utility functions media: staging/intel-ipu3: Implement DMA mapping functions media: staging/intel-ipu3: mmu: Implement driver media: staging/intel-ipu3: abi: Add structs media: staging/intel-ipu3: abi: Add register definitions and enum ...
2018-12-17Merge tag 'v4.20-rc7' into patchworkMauro Carvalho Chehab
Linux 4.20-rc7 * tag 'v4.20-rc7': (403 commits) Linux 4.20-rc7 scripts/spdxcheck.py: always open files in binary mode checkstack.pl: fix for aarch64 userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered fs/iomap.c: get/put the page in iomap_page_create/release() hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page() memblock: annotate memblock_is_reserved() with __init_memblock psi: fix reference to kernel commandline enable arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h mm/sparse: add common helper to mark all memblocks present mm: introduce common STRUCT_PAGE_MAX_SHIFT define alpha: fix hang caused by the bootmem removal XArray: Fix xa_alloc when id exceeds max drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3 MAINTAINERS: Daniel for drm co-maintainer drm/amdgpu: drop fclk/gfxclk ratio setting IB/core: Fix oops in netdev_next_upper_dev_rcu() dm thin: bump target version drm/vmwgfx: remove redundant return ret statement drm/i915: Flush GPU relocs harder for gen3 ...
2018-12-14media: v4l: Add support for V4L2_BUF_TYPE_META_OUTPUTSakari Ailus
The V4L2_BUF_TYPE_META_OUTPUT mirrors the V4L2_BUF_TYPE_META_CAPTURE with the exception that it is an OUTPUT type. The use case for this is to pass buffers to the device that are not image data but metadata. The formats, just as the metadata capture formats, are typically device specific and highly structured. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Tested-by: Tian Shu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05media: Add a Kconfig option for the Request APISakari Ailus
The Request API is now merged to the kernel but the confidence on the stability of that API is not great, especially regarding the interaction with V4L2. Add a Kconfig option for the API, with a scary-looking warning. The patch itself disables request creation as well as does not advertise them as buffer flags. The driver requiring requests (cedrus) now depends on the Kconfig option as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: don't unbind/put the object when going to state QUEUEDHans Verkuil
When a buffer is returned to state QUEUED (that happens when start_streaming fails), then do not unbind and put the object from the request. Nothing has changed yet, so just keep it as is. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: keep a reference to the request until dqbufHans Verkuil
When vb2_buffer_done is called the buffer is unbound from the request and put. The media_request_object_put also 'put's the request reference. If the application has already closed the request fd, then that means that the request reference at that point goes to 0 and the whole request is released. This means that the control handler associated with the request is also freed and that causes this kernel oops: [174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o [174705.995416] 2 locks held by vivid-000-vid-o/28071: [174705.995420] #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid] [174705.995447] #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common] [174705.995460] Preemption disabled at: [174705.995461] [<0000000000000000>] (null) [174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G W 4.20.0-rc1-test-no #88 [174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [174705.995481] Call Trace: [174705.995500] dump_stack+0x46/0x60 [174705.995512] ___might_sleep.cold.79+0xe1/0xf1 [174705.995523] __mutex_lock+0x50/0x8f0 [174705.995531] ? find_held_lock+0x2d/0x90 [174705.995536] ? find_held_lock+0x2d/0x90 [174705.995542] ? find_held_lock+0x2d/0x90 [174705.995564] ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev] [174705.995576] v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev] [174705.995590] v4l2_ctrl_request_release+0x1c/0x30 [videodev] [174705.995600] media_request_clean+0x64/0xe0 [media] [174705.995609] media_request_release+0x19/0x40 [media] [174705.995617] vb2_buffer_done+0xef/0x1d0 [videobuf2_common] [174705.995630] vivid_thread_vid_out+0x2c1/0x550 [vivid] [174705.995645] ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid] [174705.995653] kthread+0x113/0x130 [174705.995659] ? kthread_park+0x80/0x80 [174705.995667] ret_from_fork+0x35/0x40 The vb2_buffer_done function can be called from interrupt context, so anything that sleeps is not allowed. The solution is to increment the request refcount when the buffer is queued and decrement it when the buffer is dequeued. Releasing the request is fine if that happens from VIDIOC_DQBUF. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: skip request checks for VIDIOC_PREPARE_BUFHans Verkuil
VIDIOC_PREPARE_BUF should ignore V4L2_BUF_FLAG_REQUEST_FD since it isn't doing anything with requests. So inform vb2_queue_or_prepare_buf whether it is called from vb2_prepare_buf or vb2_qbuf and just return 0 in the first case. This was found when adding new v4l2-compliance checks. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failedHans Verkuil
vb2_start_streaming() already rolls back the buffers, so there is no need to call __vb2_queue_cancel(). Especially since __vb2_queue_cancel() does too much, such as zeroing the q->queued_count value, causing vb2 to think that no buffers have been queued. It appears that this call to __vb2_queue_cancel() is a left-over from before commit b3379c6201bb3. Fixes: b3379c6201bb3 ('vb2: only call start_streaming if sufficient buffers are queued') Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.16 and up Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: vb2: be sure to unlock mutex on errorsMauro Carvalho Chehab
As reported by smatch: drivers/media/common/videobuf2/videobuf2-core.c: drivers/media/common/videobuf2/videobuf2-core.c:2159 vb2_mmap() warn: inconsistent returns 'mutex:&q->mmap_lock'. Locked on: line 2148 Unlocked on: line 2100 line 2108 line 2113 line 2118 line 2156 line 2159 There is one error condition that doesn't unlock a mutex. Fixes: cd26d1c4d1bc ("media: vb2: vb2_mmap: move lock up") Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: videobuf2-v4l2: drop WARN_ON in vb2_warn_zero_bytesused()Hans Verkuil
Userspace shouldn't set bytesused to 0 for output buffers. vb2_warn_zero_bytesused() warns about this (only once!), but it also calls WARN_ON(1), which is confusing since it is not immediately clear that it warns about a 0 value for bytesused. Just drop the WARN_ON as it serves no purpose. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: vb2: Allow reqbufs(0) with "in use" MMAP buffersJohn Sheu
Videobuf2 presently does not allow VIDIOC_REQBUFS to destroy outstanding buffers if the queue is of type V4L2_MEMORY_MMAP, and if the buffers are considered "in use". This is different behavior than for other memory types and prevents us from deallocating buffers in following two cases: 1) There are outstanding mmap()ed views on the buffer. However even if we put the buffer in reqbufs(0), there will be remaining references, due to vma .open/close() adjusting vb2 buffer refcount appropriately. This means that the buffer will be in fact freed only when the last mmap()ed view is unmapped. 2) Buffer has been exported as a DMABUF. Refcount of the vb2 buffer is managed properly by VB2 DMABUF ops, i.e. incremented on DMABUF get and decremented on DMABUF release. This means that the buffer will be alive until all importers release it. Considering both cases above, there does not seem to be any need to prevent reqbufs(0) operation, because buffer lifetime is already properly managed by both mmap() and DMABUF code paths. Let's remove it and allow userspace freeing the queue (and potentially allocating a new one) even though old buffers might be still in processing. To let userspace know that the kernel now supports orphaning buffers that are still in use, add a new V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS to be set by reqbufs and create_bufs. [p.zabel@pengutronix.de: added V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS, updated documentation, and added back debug message] Signed-off-by: John Sheu <sheu@chromium.org> Reviewed-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: added V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS ref] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: v4l2-tpg: array index could become negativeHans Verkuil
text[s] is a signed char, so using that as index into the font8x16 array can result in negative indices. Cast it to u8 to be safe. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: vb2: check memory model for VIDIOC_CREATE_BUFSHans Verkuil
vb2_core_create_bufs did not check if the memory model for newly added buffers is the same as for already existing buffers. It should return an error if they aren't the same. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+e1fb118a2ebb88031d21@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: vb2: vb2_mmap: move lock upHans Verkuil
If a filehandle is dup()ped, then it is possible to close it from one fd and call mmap from the other. This creates a race condition in vb2_mmap where it is using queue data that __vb2_queue_free (called from close()) is in the process of releasing. By moving up the mutex_lock(mmap_lock) in vb2_mmap this race is avoided since __vb2_queue_free is called with the same mutex locked. So vb2_mmap now reads consistent buffer data. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reported-by: syzbot+be93025dd45dccd8923c@syzkaller.appspotmail.com Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-31Merge tag 'media/v4.20-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull new experimental media request API from Mauro Carvalho Chehab: "A new media request API This API is needed to support device drivers that can dynamically change their parameters for each new frame. The latest versions of Google camera and codec HAL depends on such feature. At this stage, it supports only stateless codecs. It has been discussed for a long time (at least over the last 3-4 years), and we finally reached to something that seem to work. This series contain both the API and core changes required to support it and a new m2m decoder driver (cedrus). As the current API is still experimental, the only real driver using it (cedrus) was added at staging[1]. We intend to keep it there for a while, in order to test the API. Only when we're sure that this API works for other cases (like encoders), we'll move this driver out of staging and set the API into a stone. [1] We added support for the vivid virtual driver (used only for testing) to it too, as it makes easier to test the API for the ones that don't have the cedrus hardware" * tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits) media: dt-bindings: Document the Rockchip VPU bindings media: platform: Add Cedrus VPU decoder driver media: dt-bindings: media: Document bindings for the Cedrus VPU driver media: v4l: Add definition for the Sunxi tiled NV12 format media: v4l: Add definitions for MPEG-2 slice format and metadata media: videobuf2-core: Rework and rename helper for request buffer count media: v4l2-ctrls.c: initialize an error return code with zero media: v4l2-compat-ioctl32.c: add missing documentation for a field media: media-request: update documentation media: media-request: EPERM -> EACCES/EBUSY media: v4l2-ctrls: improve media_request_(un)lock_for_update media: v4l2-ctrls: use media_request_(un)lock_for_access media: media-request: add media_request_(un)lock_for_access media: vb2: set reqbufs/create_bufs capabilities media: videodev2.h: add new capabilities for buffer types media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF media: v4l2-ctrls: return -EACCES if request wasn't completed media: media-request: return -EINVAL for invalid request_fds media: vivid: add request support media: vivid: add mc ...
2018-10-09media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSDHans Verkuil
When the OSD is on (i.e. vivid displays text on top of the test pattern), and you enable hflip, then the driver crashes. The cause turned out to be a division of a negative number by an unsigned value. You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-( Fixes: 3e14e7a82c1ef ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: <stable@vger.kernel.org> # for v4.1 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-09media: v4l2-tpg-core: Add 16-bit bayerBård Eirik Winther
Add 16-bit bayer formats to the test pattern generator, namely V4L2_PIX_FMT_SRGGB16 V4L2_PIX_FMT_SGRBG16 V4L2_PIX_FMT_SGBRG16 V4L2_PIX_FMT_SBGGR16 Signed-off-by: Bård Eirik Winther <bwinther@cisco.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: rc: Remove init_ir_raw_event and DEFINE_IR_RAW_EVENT macrosSean Young
This can be done with c99 initializers, which makes the code cleaner and more transparent. It does require gcc 4.6, because of this bug in earlier versions: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 Since commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6"), this is the case. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: videobuf2-core: Rework and rename helper for request buffer countPaul Kocialkowski
The helper indicating whether buffers are associated with the request is reworked and renamed to return the number of associated buffer objects. This is useful for drivers that need to check how many buffers are in the request to validate it. Existing users of the helper don't need particular adaptation since the meaning of zero/non-zero remains consistent. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: vb2: check for sane values from queue_setupJohan Fjeldtvedt
Warn and return error from the reqbufs ioctl when driver sets 0 number of planes or 0 as plane sizes, as these values don't make any sense. Checking this here stops obviously wrong values from propagating further and causing various problems that are hard to trace back to either of these values being 0. Signed-off-by: Johan Fjeldtvedt <johfjeld@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: replace ADOBERGB by OPRGBHans Verkuil
The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: replace strcpy() by strscpy()Mauro Carvalho Chehab
The strcpy() function is being deprecated upstream. Replace it by the safer strscpy(). Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: media-request: EPERM -> EACCES/EBUSYHans Verkuil
If requests are not supported by the driver, then return EACCES, not EPERM. If you attempt to mix queueing buffers directly and using requests, then EBUSY is returned instead of EPERM: once a specific queueing mode has been chosen the queue is 'busy' if you attempt the other mode (i.e. direct queueing vs via a request). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: vb2: set reqbufs/create_bufs capabilitiesHans Verkuil
Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers. The various mapping modes were easy, but for signaling the request capability a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in vim2m and vivid). Drivers have to set this bitfield for any queue where requests are supported. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-tpg: add Z16 supportHans Verkuil
Z16 support is identical to Y16, so that's easy to add. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: v4l2-tpg: show either Y'CbCr or HSV encodingHans Verkuil
When logging the current TPG state detect if we are generating a Y'CbCr or HSV pattern and report one or the other instead of both, which is confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: refuse qbuf if queue uses requests or vv.Hans Verkuil
Check if the vb2 queue uses requests, and if so refuse to add buffers that are not part of a request. Also check for the reverse: a vb2 queue did not use requests, and an attempt was made to queue a buffer to a request. We might relax this in the future, but for now just return -EPERM in that case. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: add uses_requests/qbuf flagsHans Verkuil
Set the first time a buffer from a request is queued to vb2 (uses_requests) or directly queued (uses_qbuf). Cleared when the queue is canceled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: add vb2_request_queue/validate helpersHans Verkuil
The generic vb2_request_validate helper function checks if there are buffers in the request and if so, prepares (validates) all objects in the request. The generic vb2_request_queue helper function queues all buffer objects in the validated request. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: add request helper functionsHans Verkuil
Add a new helper function to tell if a request object is a buffer. Add a new helper function that returns true if a media_request contains at least one buffer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: integrate with media requestsHans Verkuil
This implements the V4L2 part of the request support. The main change is that vb2_qbuf and vb2_prepare_buf now have a new media_device pointer. This required changes to several drivers that did not use the vb2_ioctl_qbuf/prepare_buf helper functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-core: integrate with media requestsHans Verkuil
Buffers can now be prepared or queued for a request. A buffer is unbound from the request at vb2_buffer_done time or when the queue is cancelled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: add init_buffer buffer opHans Verkuil
We need to initialize the request_fd field in struct vb2_v4l2_buffer to -1 instead of the default of 0. So we need to add a new op that is called when struct vb2_v4l2_buffer is allocated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videodev2.h: Add request_fd field to v4l2_bufferHans Verkuil
When queuing buffers allow for passing the request that should be associated with this buffer. If V4L2_BUF_FLAG_REQUEST_FD is set, then request_fd is used as the file descriptor. If a buffer is stored in a request, but not yet queued to the driver, then V4L2_BUF_FLAG_IN_REQUEST is set. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: drop VB2_BUF_STATE_PREPARED, use bool prepared/synced insteadHans Verkuil
The PREPARED state becomes a problem with the request API: a buffer could be PREPARED but dequeued, or PREPARED and in state IN_REQUEST. PREPARED is really not a state as such, but more a property of the buffer. So make new 'prepared' and 'synced' bools instead to remember whether the buffer is prepared and/or synced or not. V4L2_BUF_FLAG_PREPARED is only set if the buffer is both synced and prepared and in the DEQUEUED state. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: vb2: store userspace data in vb2_v4l2_bufferHans Verkuil
The userspace-provided plane data needs to be stored in vb2_v4l2_buffer. Currently this information is applied by __fill_vb2_buffer() which is called by the core prepare_buf and qbuf functions, but when using requests these functions aren't called yet since the buffer won't be prepared until the media request is actually queued. In the meantime this information has to be stored somewhere and vb2_v4l2_buffer is a good place for it. The __fill_vb2_buffer callback now just copies the relevant information from vb2_v4l2_buffer into the planes array. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: replace if by switch in __fill_vb2_buffer()Hans Verkuil
Replace 'if' statements by a switch in __fill_vb2_buffer() in preparation of the next patch. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: videobuf2-v4l2: move __fill_v4l2_buffer() functionHans Verkuil
Move the __fill_v4l2_buffer() to before the vb2_queue_or_prepare_buf() function to prepare for the next two patches. No other changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-15Merge tag 'media/v4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ...
2018-08-08siano: get rid of an unused return code for debugfs registerMauro Carvalho Chehab
The siano's debugfs register logic is optional: it should be ok if it fails. So, no need to check if debufs register succeeded. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dvb: represent min/max/step/tolerance freqs in HzMauro Carvalho Chehab
Right now, satellite frontend drivers specify frequencies in kHz, while terrestrial/cable ones specify in Hz. That's confusing for developers. However, the main problem is that universal frontends capable of handling both satellite and non-satelite delivery systems are appearing. We end by needing to hack the drivers in order to support such hybrid frontends. So, convert everything to specify frontend frequencies in Hz. Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: videobuf2-core: check for q->error in vb2_core_qbuf()Hans Verkuil
The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20dma_buf: remove device parameter from attach callback v2Christian König
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/226643/
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-28media: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Note: - The various VIDEOBUF*DMA* symbols had to loose their dependencies on HAS_DMA, as they are selected by several individual drivers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: videobuf2-core: don't call memop 'finish' when queueingHans Verkuil
When a buffer is queued or requeued in vb2_buffer_done, then don't call the finish memop. In this case the buffer is only returned to vb2, not to userspace. Calling 'finish' here will cause an unbalance when the queue is canceled, since the core will call the same memop again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-15media: siano: use GFP_DMA only for smssdioMauro Carvalho Chehab
Right now, the Siano's core uses GFP_DMA for both USB and SDIO variants of the driver. There's no reason to use it for USB. So, pass GFP_DMA as a parameter during sms core register. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 11:19:35 +0000