| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size"
* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: fix FEC for RS roots unaligned to block size
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
|
|
Optional Forward Error Correction (FEC) code in dm-verity uses
Reed-Solomon code and should support roots from 2 to 24.
The error correction parity bytes (of roots lengths per RS block) are
stored on a separate device in sequence without any padding.
Currently, to access FEC device, the dm-verity-fec code uses dm-bufio
client with block size set to verity data block (usually 4096 or 512
bytes).
Because this block size is not divisible by some (most!) of the roots
supported lengths, data repair cannot work for partially stored parity
bytes.
This fix changes FEC device dm-bufio block size to "roots << SECTOR_SHIFT"
where we can be sure that the full parity data is always available.
(There cannot be partial FEC blocks because parity must cover whole
sectors.)
Because the optional FEC starting offset could be unaligned to this
new block size, we have to use dm_bufio_set_sector_offset() to
configure it.
The problem is easily reproduced using veritysetup, e.g. for roots=13:
# create verity device with RS FEC
dd if=/dev/urandom of=data.img bs=4096 count=8 status=none
veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=13 | awk '/^Root hash/{ print $3 }' >roothash
# create an erasure that should be always repairable with this roots setting
dd if=/dev/zero of=data.img conv=notrunc bs=1 count=8 seek=4088 status=none
# try to read it through dm-verity
veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=13 $(cat roothash)
dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer
# wait for possible recursive recovery in kernel
udevadm settle
veritysetup close test
With this fix, errors are properly repaired.
device-mapper: verity-fec: 7:1: FEC 0: corrected 8 errors
...
Without it, FEC code usually ends on unrecoverable failure in RS decoder:
device-mapper: verity-fec: 7:1: FEC 0: failed to correct: -74
...
This problem is present in all kernels since the FEC code's
introduction (kernel 4.5).
It is thought that this problem is not visible in Android ecosystem
because it always uses a default RS roots=2.
Depends-on: a14e5ec66a7a ("dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size")
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Tested-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm_bufio_get_device_size returns the device size in blocks. Before
returning the value, we must subtract the nubmer of starting
sectors. The number of starting sectors may not be divisible by block
size.
Note that currently, no target is using dm_bufio_set_sector_offset and
dm_bufio_get_device_size simultaneously, so this change has no effect.
However, an upcoming dm-verity-fec fix needs this change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
|
|
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM integrity's HMAC support to provide enhanced security of
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number of
in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
dm: fix deadlock when swapping to encrypted device
dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
dm: support key eviction from keyslot managers of underlying devices
dm: add support for passing through inline crypto support
block/keyslot-manager: Introduce functions for device mapper support
block/keyslot-manager: Introduce passthrough keyslot manager
dm era: only resize metadata in preresume
dm era: Use correct value size in equality function of writeset tree
dm era: Fix bitset memory leaks
dm era: Verify the data block size hasn't changed
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: Update in-core bitset after committing the metadata
dm era: Recover committed writeset after crash
dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
dm writecache: fix writing beyond end of underlying device when shrinking
dm table: remove needless request_queue NULL pointer checks
dm table: fix zoned iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix iterate_devices based device capability checks
...
|
|
Pull block driver updates from Jens Axboe:
- Remove the skd driver. It's been EOL for a long time (Damien)
- NVMe pull requests
- fix multipath handling of ->queue_rq errors (Chao Leng)
- nvmet cleanups (Chaitanya Kulkarni)
- add a quirk for buggy Amazon controller (Filippo Sironi)
- avoid devm allocations in nvme-hwmon that don't interact well
with fabrics (Hannes Reinecke)
- sysfs cleanups (Jiapeng Chong)
- fix nr_zones for multipath (Keith Busch)
- nvme-tcp crash fix for no-data commands (Sagi Grimberg)
- nvmet-tcp fixes (Sagi Grimberg)
- add a missing __rcu annotation (Christoph)
- failed reconnect fixes (Chao Leng)
- various tracing improvements (Michal Krakowiak, Johannes
Thumshirn)
- switch the nvmet-fc assoc_list to use RCU protection (Leonid
Ravich)
- resync the status codes with the latest spec (Max Gurtovoy)
- minor nvme-tcp improvements (Sagi Grimberg)
- various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
Kulkarni, Israel Rukshin)
- Floppy O_NDELAY fix (Denis)
- MD pull request
- raid5 chunk_sectors fix (Guoqing)
- Use lore links (Kees)
- Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)
- loop lock scaling (Pavel)
- mtip32xx PCI fixes (Bjorn)
- bcache fixes (Kai, Dongdong)
- Misc fixes (Tian, Yang, Guoqing, Joe, Andy)
* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
lightnvm: fix unnecessary NULL check warnings
nvme-tcp: fix crash triggered with a dataless request submission
block: Replace lkml.org links with lore
nbd: Convert to DEFINE_SHOW_ATTRIBUTE
nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
nvme-hwmon: rework to avoid devm allocation
nvmet: remove else at the end of the function
nvmet: add nvmet_req_subsys() helper
nvmet: use min of device_path and disk len
nvmet: use invalid cmd opcode helper
nvmet: use invalid cmd opcode helper
nvmet: add helper to report invalid opcode
nvmet: remove extra variable in id-ns handler
nvmet: make nvmet_find_namespace() req based
nvmet: return uniform error for invalid ns
nvmet: set status to 0 in case for invalid nsid
nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
nvme-multipath: set nr_zones for zoned namespaces
nvmet-tcp: fix potential race of tcp socket closing accept_work
...
|
|
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
|
|
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-linear and dm-flakey obviously can pass through inline crypto support.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Now that device mapper supports inline encryption, add the ability to
evict keys from all underlying devices. When an upper layer requests
a key eviction, we simply iterate through all underlying devices
and evict that key from each device.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Metadata resize shouldn't happen in the ctr. The ctr loads a temporary
(inactive) table that will only become active upon resume. That is why
resize should always be done in terms of resume. Otherwise a load (ctr)
whose inactive table never becomes active will incorrectly resize the
metadata.
Also, perform the resize directly in preresume, instead of using the
worker to do it.
The worker might run other metadata operations, e.g., it could start
digestion, before resizing the metadata. These operations will end up
using the old size.
This could lead to errors, like:
device-mapper: era: metadata_digest_transcribe_writeset: dm_array_set_value failed
device-mapper: era: process_old_eras: digest step failed, stopping digestion
The reason of the above error is that the worker started the digestion
of the archived writeset using the old, larger size.
As a result, metadata_digest_transcribe_writeset tried to write beyond
the end of the era array.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix the writeset tree equality test function to use the right value size
when comparing two btree values.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Deallocate the memory allocated for the in-core bitsets when destroying
the target and in error paths.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-era doesn't support changing the data block size of existing devices,
so check explicitly that the requested block size for a new target
matches the one stored in the metadata.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
In case of devices with at most 64 blocks, the digestion of consecutive
eras uses the writeset of the first era as the writeset of all eras to
digest, leading to lost writes. That is, we lose the information about
what blocks were written during the affected eras.
The digestion code uses a dm_disk_bitset object to access the archived
writesets. This structure includes a one word (64-bit) cache to reduce
the number of array lookups.
This structure is initialized only once, in metadata_digest_start(),
when we kick off digestion.
But, when we insert a new writeset into the writeset tree, before the
digestion of the previous writeset is done, or equivalently when there
are multiple writesets in the writeset tree to digest, then all these
writesets are digested using the same cache and the cache is not
re-initialized when moving from one writeset to the next.
For devices with more than 64 blocks, i.e., the size of the cache, the
cache is indirectly invalidated when we move to a next set of blocks, so
we avoid the bug.
But for devices with at most 64 blocks we end up using the same cached
data for digesting all archived writesets, i.e., the cache is loaded
when digesting the first writeset and it never gets reloaded, until the
digestion is done.
As a result, the writeset of the first era to digest is used as the
writeset of all the following archived eras, leading to lost writes.
Fix this by reinitializing the dm_disk_bitset structure, and thus
invalidating the cache, every time the digestion code starts digesting a
new writeset.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
In case of a system crash, dm-era might fail to mark blocks as written
in its metadata, although the corresponding writes to these blocks were
passed down to the origin device and completed successfully.
Consider the following sequence of events:
1. We write to a block that has not been yet written in the current era
2. era_map() checks the in-core bitmap for the current era and sees
that the block is not marked as written.
3. The write is deferred for submission after the metadata have been
updated and committed.
4. The worker thread processes the deferred write
(process_deferred_bios()) and marks the block as written in the
in-core bitmap, **before** committing the metadata.
5. The worker thread starts committing the metadata.
6. We do more writes that map to the same block as the write of step (1)
7. era_map() checks the in-core bitmap and sees that the block is marked
as written, **although the metadata have not been committed yet**.
8. These writes are passed down to the origin device immediately and the
device reports them as completed.
9. The system crashes, e.g., power failure, before the commit from step
(5) finishes.
When the system recovers and we query the dm-era target for the list of
written blocks it doesn't report the aforementioned block as written,
although the writes of step (6) completed successfully.
The issue is that era_map() decides whether to defer or not a write
based on non committed information. The root cause of the bug is that we
update the in-core bitmap, **before** committing the metadata.
Fix this by updating the in-core bitmap **after** successfully
committing the metadata.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Following a system crash, dm-era fails to recover the committed writeset
for the current era, leading to lost writes. That is, we lose the
information about what blocks were written during the affected era.
dm-era assumes that the writeset of the current era is archived when the
device is suspended. So, when resuming the device, it just moves on to
the next era, ignoring the committed writeset.
This assumption holds when the device is properly shut down. But, when
the system crashes, the code that suspends the target never runs, so the
writeset for the current era is not archived.
There are three issues that cause the committed writeset to get lost:
1. dm-era doesn't load the committed writeset when opening the metadata
2. The code that resizes the metadata wipes the information about the
committed writeset (assuming it was loaded at step 1)
3. era_preresume() starts a new era, without taking into account that
the current era might not have been archived, due to a system crash.
To fix this:
1. Load the committed writeset when opening the metadata
2. Fix the code that resizes the metadata to make sure it doesn't wipe
the loaded writeset
3. Fix era_preresume() to check for a loaded writeset and archive it,
before starting a new era.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is potentially long running and not latency sensitive, let's get
it out of the way of other latency sensitive events.
As observed in the previous commit, the `system_wq` comes easily
congested by bcache, and this fixes a few more stalls I was observing
every once in a while.
Let's not make this `WQ_MEM_RECLAIM` as it showed to reduce performance
of boot and file system operations in my tests. Also, without
`WQ_MEM_RECLAIM`, I no longer see desktop stalls. This matches the
previous behavior as `system_wq` also does no memory reclaim:
> // workqueue.c:
> system_wq = alloc_workqueue("events", 0, 0);
Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Before killing `btree_io_wq`, the queue was allocated using
`create_singlethread_workqueue()` which has `WQ_MEM_RECLAIM`. After
killing it, it no longer had this property but `system_wq` is not
single threaded.
Let's combine both worlds and make it multi threaded but able to
reclaim memory.
Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 56b30770b27d54d68ad51eccc6d888282b568cee.
With the btree using the `system_wq`, I seem to see a lot more desktop
latency than I should.
After some more investigation, it looks like the original assumption
of 56b3077 no longer is true, and bcache has a very high potential of
congesting the `system_wq`. In turn, this introduces laggy desktop
performance, IO stalls (at least with btrfs), and input events may be
delayed.
So let's revert this. It's important to note that the semantics of
using `system_wq` previously mean that `btree_io_wq` should be created
before and destroyed after other bcache wqs to keep the same
assumptions.
Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Should be `register_device_async`.
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current way to calculate the writeback rate only considered the
dirty sectors, this usually works fine when the fragmentation
is not high, but it will give us unreasonable small rate when
we are under a situation that very few dirty sectors consumed
a lot dirty buckets. In some case, the dirty bucekts can reached
to CUTOFF_WRITEBACK_SYNC while the dirty data(sectors) not even
reached the writeback_percent, the writeback rate will still
be the minimum value (4k), thus it will cause all the writes to be
stucked in a non-writeback mode because of the slow writeback.
We accelerate the rate in 3 stages with different aggressiveness,
the first stage starts when dirty buckets percent reach above
BCH_WRITEBACK_FRAGMENT_THRESHOLD_LOW (50), the second is
BCH_WRITEBACK_FRAGMENT_THRESHOLD_MID (57), the third is
BCH_WRITEBACK_FRAGMENT_THRESHOLD_HIGH (64). By default
the first stage tries to writeback the amount of dirty data
in one bucket (on average) in (1 / (dirty_buckets_percent - 50)) second,
the second stage tries to writeback the amount of dirty data in one bucket
in (1 / (dirty_buckets_percent - 57)) * 100 millisecond, the third
stage tries to writeback the amount of dirty data in one bucket in
(1 / (dirty_buckets_percent - 64)) millisecond.
the initial rate at each stage can be controlled by 3 configurable
parameters writeback_rate_fp_term_{low|mid|high}, they are by default
1, 10, 1000, the hint of IO throughput that these values are trying
to achieve is described by above paragraph, the reason that
I choose those value as default is based on the testing and the
production data, below is some details:
A. When it comes to the low stage, there is still a bit far from the 70
threshold, so we only want to give it a little bit push by setting the
term to 1, it means the initial rate will be 170 if the fragment is 6,
it is calculated by bucket_size/fragment, this rate is very small,
but still much reasonable than the minimum 8.
For a production bcache with unheavy workload, if the cache device
is bigger than 1 TB, it may take hours to consume 1% buckets,
so it is very possible to reclaim enough dirty buckets in this stage,
thus to avoid entering the next stage.
B. If the dirty buckets ratio didn't turn around during the first stage,
it comes to the mid stage, then it is necessary for mid stage
to be more aggressive than low stage, so i choose the initial rate
to be 10 times more than low stage, that means 1700 as the initial
rate if the fragment is 6. This is some normal rate
we usually see for a normal workload when writeback happens
because of writeback_percent.
C. If the dirty buckets ratio didn't turn around during the low and mid
stages, it comes to the third stage, and it is the last chance that
we can turn around to avoid the horrible cutoff writeback sync issue,
then we choose 100 times more aggressive than the mid stage, that
means 170000 as the initial rate if the fragment is 6. This is also
inferred from a production bcache, I've got one week's writeback rate
data from a production bcache which has quite heavy workloads,
again, the writeback is triggered by the writeback percent,
the highest rate area is around 100000 to 240000, so I believe this
kind aggressiveness at this stage is reasonable for production.
And it should be mostly enough because the hint is trying to reclaim
1000 bucket per second, and from that heavy production env,
it is consuming 50 bucket per second on average in one week's data.
Option writeback_consider_fragment is to control whether we want
this feature to be on or off, it's on by default.
Lastly, below is the performance data for all the testing result,
including the data from production env:
https://docs.google.com/document/d/1AmbIEa_2MhB9bqhC3rfga9tp7n9YX9PLn0jSUxscVW0/edit?usp=sharing
Signed-off-by: dongdong tao <dongdong.tao@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Do not attempt to write any data beyond the end of the underlying data
device while shrinking it.
The DM writecache device must be suspended when the underlying data
device is shrunk.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Since commit ff9ea323816d ("block, bdi: an active gendisk always has a
request_queue associated with it") the request_queue pointer returned
from bdev_get_queue() shall never be NULL.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix dm_table_supports_zoned_model() and invert logic of both
iterate_devices_callout_fn so that all devices' zoned capabilities are
properly checked.
Add one more parameter to dm_table_any_dev_attr(), which is actually
used as the @data parameter of iterate_devices_callout_fn, so that
dm_table_matches_zone_sectors() can be replaced by
dm_table_any_dev_attr().
Fixes: dd88d313bef02 ("dm table: add zoned block devices validation")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix dm_table_supports_dax() and invert logic of both
iterate_devices_callout_fn so that all devices' DAX capabilities are
properly checked.
Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
According to the definition of dm_iterate_devices_fn:
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
For some target type (e.g. dm-stripe), one call of iterate_devices() may
iterate multiple underlying devices internally, in which case a non-zero
return code returned by iterate_devices_callout_fn will stop the iteration
in advance. No iterate_devices_callout_fn should return non-zero unless
device iteration should stop.
Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and
elevate it for reuse to stop iterating (and return non-zero) on the
first device that causes iterate_devices_callout_fn to return non-zero.
Use dm_table_any_dev_attr() to properly iterate through devices.
Rename device_is_nonrot() to device_is_rotational() and invert logic
accordingly to fix improper disposition.
Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set")
Fixes: 4693c9668fdc ("dm table: propagate non rotational flag")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
LVM doesn't like it when the target returns different values from what
was set in the constructor. Fix dm-writecache so that the returned
table values are exactly the same as requested values.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
A bio allocated by bio_alloc_bioset comes pre-zeroed, no need to
clear random fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, raid5 calculates dev_sectors from chunk_sectors without
proper cast, which is problematic.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Commit 27f5411a718c ("dm crypt: support using encrypted keys") extended
dm-crypt to allow use of "encrypted" keys along with "user" and "logon".
Along the same lines, teach dm-crypt to support "trusted" keys as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
IS_ENABLED(CONFIG_ENCRYPTED_KEYS) is true whether the option is built-in
or a module, so use it instead of #if defined checking for each
separately.
The other #if was to avoid a static function defined, but unused
warning. As we now always build the callsite when the function
is defined, we can remove that first #if guard.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Remove NULL checks before vfree() to fix these warnings:
./drivers/md/dm-writecache.c:2008:2-7: WARNING: NULL check before some
freeing functions is not needed.
./drivers/md/dm-writecache.c:2024:2-7: WARNING: NULL check before some
freeing functions is not needed.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix a thinko in ssd_commit_superblock. region.count is in sectors, not
bytes. This bug doesn't corrupt data, but it causes performance
degradation.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: dc8a01ae1dbd ("dm writecache: optimize superblock write")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The "fix_hmac" argument improves security of internal_hash and
journal_mac:
- the section number is mixed to the mac, so that an attacker can't
copy sectors from one journal section to another journal section
- the superblock is protected by journal_mac
- a 16-byte salt stored in the superblock is mixed to the mac, so
that the attacker can't detect that two disks have the same hmac
key and also to disallow the attacker to move sectors from one
disk to another
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> # ReST fix
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
shadow_root() truncates 64-bit dm_block_t into 32-bit int. This is
not an issue in practice, since dm metadata as of v5.11 can only hold at
most 4161600 blocks (255 index entries * ~16k metadata blocks).
Nevertheless, this can confuse users debugging some specific data
corruption scenarios. Also, DM_SM_METADATA_MAX_BLOCKS may be bumped in
the future, or persistent-data may find its use in other places.
Therefore, switch the return type of shadow_root from int to dm_block_t.
Signed-off-by: Jinoh Kang <jinoh.kang.kr@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add two helper macros calculating the offset of bio in struct dm_io and
struct dm_target_io respectively.
Besides, simplify the front padding calculation in
dm_alloc_md_mempools().
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There is a spelling mistake in a dm_integrity_io_error error
message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix a misspelling of "cipher".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
See Documentation/core-api/printk-formats.rst.
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Make the read-only check in restart_array identical to the other two
read-only checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->meta_bdev is optional and not set for most arrays. Add a
rdev_read_only helper that calls bdev_read_only for both devices
in a safe way.
Fixes: 6f0d9689b670 ("block: remove the NULL bdev check in bdev_read_only")
Reported-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"All over the place fixes for this release:
- blk-cgroup iteration teardown resched fix (Baolin)
- NVMe pull request from Christoph:
- add another Write Zeroes quirk (Chaitanya Kulkarni)
- handle a no path available corner case (Daniel Wagner)
- use the proper RCU aware list_add helper (Chao Leng)
- bcache regression fix (Coly)
- bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12,
but for now, we'll make it IRQ safe (Damien)
- null_blk zoned init fix (Damien)
- add_partition() error handling fix (Dinghao)
- s390 dasd kobject fix (Jan)
- nbd fix for freezing queue while adding connections (Josef)
- tag queueing regression fix (Ming)
- revert of a patch that inadvertently meant that we regressed write
performance on raid (Maxim)"
* tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
null_blk: cleanup zoned mode initialization
nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
nvme-multipath: Early exit if no path is available
nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
block: fix bd_size_lock use
blk-cgroup: Use cond_resched() when destroy blkgs
Revert "block: simplify set_init_blocksize" to regain lost performance
nbd: freeze the queue while we're adding connections
s390/dasd: Fix inconsistent kobject removal
block: Fix an error handling in add_partition
blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
|
|
BCACHE_SB_VERSION_CDEV_WITH_FEATURES
For super block version < BCACHE_SB_VERSION_CDEV_WITH_FEATURES, it
doesn't make sense to check the feature sets. This patch checks
super block version in bch_has_feature_* routines, if the version
doesn't have feature sets yet, returns 0 (false) to the caller.
Fixes: 5342fd425502 ("bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET")
Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Cc: stable@vger.kernel.org # 5.9+
Reported-and-tested-by: Bockholdt Arne <a.bockholdt@precitec-optronik.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refactor raid5_read_one_chunk so that all simple checks are done
before allocating the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
