| Age | Commit message (Collapse) | Author |
|---|
|
Pull more block updates from Jens Axboe:
"Some later arrivals, but all fixes at this point:
- bcache fix series (Coly)
- Series of BFQ fixes (Paolo)
- NVMe pull request from Keith with a few minor NVMe fixes
- Various little tweaks"
* tag 'block-5.6-2020-02-05' of git://git.kernel.dk/linux-block: (23 commits)
nvmet: update AEN list and array at one place
nvmet: Fix controller use after free
nvmet: Fix error print message at nvmet_install_queue function
brd: check and limit max_part par
nvme-pci: remove nvmeq->tags
nvmet: fix dsm failure when payload does not match sgl descriptor
nvmet: Pass lockdep expression to RCU lists
block, bfq: clarify the goal of bfq_split_bfqq()
block, bfq: get a ref to a group when adding it to a service tree
block, bfq: remove ifdefs from around gets/puts of bfq groups
block, bfq: extend incomplete name of field on_st
block, bfq: get extra ref to prevent a queue from being freed during a group move
block, bfq: do not insert oom queue into position tree
block, bfq: do not plug I/O for bfq_queues with no proc refs
bcache: check return value of prio_read()
bcache: fix incorrect data type usage in btree_flush_write()
bcache: add readahead cache policy options via sysfs interface
bcache: explicity type cast in bset_bkey_last()
bcache: fix memory corruption in bch_cache_accounting_clear()
xen/blkfront: limit allocated memory size to actual use case
...
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now if prio_read() failed during starting a cache set, we can print
out error message in run_cache_set() and handle the failure properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Dan Carpenter points out that from commit 2aa8c529387c ("bcache: avoid
unnecessary btree nodes flushing in btree_flush_write()"), there is a
incorrect data type usage which leads to the following static checker
warning:
drivers/md/bcache/journal.c:444 btree_flush_write()
warn: 'ref_nr' unsigned <= 0
drivers/md/bcache/journal.c
422 static void btree_flush_write(struct cache_set *c)
423 {
424 struct btree *b, *t, *btree_nodes[BTREE_FLUSH_NR];
425 unsigned int i, nr, ref_nr;
^^^^^^
426 atomic_t *fifo_front_p, *now_fifo_front_p;
427 size_t mask;
428
429 if (c->journal.btree_flushing)
430 return;
431
432 spin_lock(&c->journal.flush_write_lock);
433 if (c->journal.btree_flushing) {
434 spin_unlock(&c->journal.flush_write_lock);
435 return;
436 }
437 c->journal.btree_flushing = true;
438 spin_unlock(&c->journal.flush_write_lock);
439
440 /* get the oldest journal entry and check its refcount */
441 spin_lock(&c->journal.lock);
442 fifo_front_p = &fifo_front(&c->journal.pin);
443 ref_nr = atomic_read(fifo_front_p);
444 if (ref_nr <= 0) {
^^^^^^^^^^^
Unsigned can't be less than zero.
445 /*
446 * do nothing if no btree node references
447 * the oldest journal entry
448 */
449 spin_unlock(&c->journal.lock);
450 goto out;
451 }
452 spin_unlock(&c->journal.lock);
As the warning information indicates, local varaible ref_nr in unsigned
int type is wrong, which does not matche atomic_read() and the "<= 0"
checking.
This patch fixes the above error by defining local variable ref_nr as
int type.
Fixes: 2aa8c529387c ("bcache: avoid unnecessary btree nodes flushing in btree_flush_write()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In year 2007 high performance SSD was still expensive, in order to
save more space for real workload or meta data, the readahead I/Os
for non-meta data was bypassed and not cached on SSD.
In now days, SSD price drops a lot and people can find larger size
SSD with more comfortable price. It is unncessary to alway bypass
normal readahead I/Os to save SSD space for now.
This patch adds options for readahead data cache policies via sysfs
file /sys/block/bcache<N>/readahead_cache_policy, the options are,
- "all": cache all readahead data I/Os.
- "meta-only": only cache meta data, and bypass other regular I/Os.
If users want to make bcache continue to only cache readahead request
for metadata and bypass regular data readahead, please set "meta-only"
to this sysfs file. By default, bcache will back to cache all read-
ahead requests now.
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In bset.h, macro bset_bkey_last() is defined as,
bkey_idx((struct bkey *) (i)->d, (i)->keys)
Parameter i can be variable type of data structure, the macro always
works once the type of struct i has member 'd' and 'keys'.
bset_bkey_last() is also used in macro csum_set() to calculate the
checksum of a on-disk data structure. When csum_set() is used to
calculate checksum of on-disk bcache super block, the parameter 'i'
data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in
struct cache_sb) the member keys is __u16 type. But bkey_idx() expects
unsigned int (a 32bit width), so there is problem when sending
parameters via stack to call bkey_idx().
Sparse tool from Intel 0day kbuild system reports this incompatible
problem. bkey_idx() is part of user space API, so the simplest fix is
to cast the (i)->keys to unsigned int type in macro bset_bkey_last().
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 83ff9318c44ba ("bcache: not use hard coded memset size in
bch_cache_accounting_clear()") tries to make the code more easy to
understand by removing the hard coded number with following change,
void bch_cache_accounting_clear(...)
{
memset(&acc->total.cache_hits,
0,
- sizeof(unsigned long) * 7);
+ sizeof(struct cache_stats));
}
Unfortunately the change was wrong (it also tells us the original code
was not easy to correctly understand). The hard coded number 7 is used
because in struct cache_stats,
15 struct cache_stats {
16 struct kobject kobj;
17
18 unsigned long cache_hits;
19 unsigned long cache_misses;
20 unsigned long cache_bypass_hits;
21 unsigned long cache_bypass_misses;
22 unsigned long cache_readaheads;
23 unsigned long cache_miss_collisions;
24 unsigned long sectors_bypassed;
25
26 unsigned int rescale;
27 };
only members in LINE 18-24 want to be set to 0. It is wrong to use
'sizeof(struct cache_stats)' to replace 'sizeof(unsigned long) * 7), the
memory objects behind acc->total is staled by this change.
Сорокин Артем Сергеевич reports that by the following steps, kernel
panic will be triggered,
1. Create new set: make-bcache -B /dev/nvme1n1 -C /dev/sda --wipe-bcache
2. Run in /sys/fs/bcache/<uuid>:
echo 1 > clear_stats && cat stats_five_minute/cache_bypass_hits
I can reproduce the panic and get following dmesg with KASAN enabled,
[22613.172742] ==================================================================
[22613.172862] BUG: KASAN: null-ptr-deref in sysfs_kf_seq_show+0x117/0x230
[22613.172864] Read of size 8 at addr 0000000000000000 by task cat/6753
[22613.172870] CPU: 1 PID: 6753 Comm: cat Not tainted 5.5.0-rc7-lp151.28.16-default+ #11
[22613.172872] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[22613.172873] Call Trace:
[22613.172964] dump_stack+0x8b/0xbb
[22613.172968] ? sysfs_kf_seq_show+0x117/0x230
[22613.172970] ? sysfs_kf_seq_show+0x117/0x230
[22613.173031] __kasan_report+0x176/0x192
[22613.173064] ? pr_cont_kernfs_name+0x40/0x60
[22613.173067] ? sysfs_kf_seq_show+0x117/0x230
[22613.173070] kasan_report+0xe/0x20
[22613.173072] sysfs_kf_seq_show+0x117/0x230
[22613.173105] seq_read+0x199/0x6d0
[22613.173110] vfs_read+0xa5/0x1a0
[22613.173113] ksys_read+0x110/0x160
[22613.173115] ? kernel_write+0xb0/0xb0
[22613.173177] do_syscall_64+0x77/0x290
[22613.173238] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[22613.173241] RIP: 0033:0x7fc2c886ac61
[22613.173244] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89
[22613.173245] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22613.173248] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61
[22613.173249] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003
[22613.173250] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000
[22613.173251] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000
[22613.173253] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000
[22613.173255] ==================================================================
[22613.173256] Disabling lock debugging due to kernel taint
[22613.173350] BUG: kernel NULL pointer dereference, address: 0000000000000000
[22613.178380] #PF: supervisor read access in kernel mode
[22613.180959] #PF: error_code(0x0000) - not-present page
[22613.183444] PGD 0 P4D 0
[22613.184867] Oops: 0000 [#1] SMP KASAN PTI
[22613.186797] CPU: 1 PID: 6753 Comm: cat Tainted: G B 5.5.0-rc7-lp151.28.16-default+ #11
[22613.191253] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[22613.196706] RIP: 0010:sysfs_kf_seq_show+0x117/0x230
[22613.199097] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48
[22613.208016] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246
[22613.210448] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6
[22613.213691] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
[22613.216893] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd
[22613.220075] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200
[22613.223256] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000
[22613.226290] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000
[22613.229637] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22613.231993] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0
[22613.234909] Call Trace:
[22613.235931] seq_read+0x199/0x6d0
[22613.237259] vfs_read+0xa5/0x1a0
[22613.239229] ksys_read+0x110/0x160
[22613.240590] ? kernel_write+0xb0/0xb0
[22613.242040] do_syscall_64+0x77/0x290
[22613.243625] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[22613.245450] RIP: 0033:0x7fc2c886ac61
[22613.246706] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89
[22613.253296] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22613.255835] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61
[22613.258472] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003
[22613.260807] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000
[22613.263188] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000
[22613.265598] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000
[22613.268729] Modules linked in: scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock fuse bnep kvm_intel kvm irqbypass crc32_pclmul crc32c_intel ghash_clmulni_intel snd_ens1371 snd_ac97_codec ac97_bus bcache snd_pcm btusb btrtl btbcm btintel crc64 aesni_intel glue_helper crypto_simd vmw_balloon cryptd bluetooth snd_timer snd_rawmidi snd joydev pcspkr e1000 rfkill vmw_vmci soundcore ecdh_generic ecc gameport i2c_piix4 mptctl ac button hid_generic usbhid sr_mod cdrom ata_generic ehci_pci vmwgfx uhci_hcd drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ttm ehci_hcd mptspi scsi_transport_spi mptscsih ata_piix mptbase ahci usbcore libahci drm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua
[22613.292429] CR2: 0000000000000000
[22613.293563] ---[ end trace a074b26a8508f378 ]---
[22613.295138] RIP: 0010:sysfs_kf_seq_show+0x117/0x230
[22613.296769] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48
[22613.303553] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246
[22613.305280] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6
[22613.307924] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
[22613.310272] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd
[22613.312685] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200
[22613.315076] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000
[22613.318116] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000
[22613.320743] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22613.322628] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0
Here this patch fixes the following problem by explicity set all the 7
members to 0 in bch_cache_accounting_clear().
Reported-by: Сорокин Артем Сергеевич <a.sorokin@bank-hlynov.ru>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's potential for q->make_request_fn NULL pointer in the
unlikely case that a DM device is created without a DM table and then
accessed due to upper-layer userspace code or user error.
- Fix DM thin-provisioning's metadata_pre_commit_callback to not use
memory after it is free'd. Also refactor code to disallow changing
the thin-pool's data device once in use -- doing so guarantees smae
lifetime of pool's data device relative to the pool metadata.
- Fix DM space maps used by DM thinp and DM cache to avoid reuse of a
already used block. This race was identified with extremely heavy
snapshot use in the context of DM thin provisioning.
- Fix DM raid's table status relative to an active rebuild.
- Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to
skcipher_request_alloc(). Also fix benbi IV constructor crash if used
in authenticated mode.
- Add DM crypt support for Elephant diffuser to allow for Bitlocker
compatibility.
- Fix DM verity target to not prefetch hash blocks for data that has
already been verified.
- Fix DM writecache's incorrect flush sequence during commit when in
SSD mode.
- Improve DM writecache's sequential write performance on SSDs.
- Add DM zoned target support for zone sizes smaller than 128MiB.
- Add DM multipath 'queue_if_no_path_timeout_secs' module param to
allow timeout if path isn't reinstated. This allows users a kernel
safety-net against IO hanging indefinitely, due to no active paths,
that has historically only been provided by multipathd userspace.
- Various DM code cleanups to use true/false rather than 1/0, a
variable rename in dm-dust, and fix for a math error in comment for
DM thin metadata's ondisk format.
* tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (21 commits)
dm: fix potential for q->make_request_fn NULL pointer
dm writecache: improve performance of large linear writes on SSDs
dm mpath: Add timeout mechanism for queue_if_no_path
dm thin: change data device's flush_bio to be member of struct pool
dm thin: don't allow changing data device during thin-pool reload
dm thin: fix use-after-free in metadata_pre_commit_callback
dm thin metadata: use pool locking at end of dm_pool_metadata_close
dm writecache: fix incorrect flush sequence when doing SSD mode commit
dm crypt: fix benbi IV constructor crash if used in authenticated mode
dm crypt: Implement Elephant diffuser for Bitlocker compatibility
dm space map common: fix to ensure new block isn't already in use
dm verity: don't prefetch hash blocks for already-verified data
dm crypt: fix GFP flags passed to skcipher_request_alloc()
dm thin metadata: Fix trivial math error in on-disk format documentation
dm thin metadata: use true/false for bool variable
dm snapshot: use true/false for bool variable
dm bio prison v2: use true/false for bool variable
dm mpath: use true/false for bool variable
dm zoned: support zone sizes smaller than 128MiB
dm raid: table line rebuild status fixes
...
|
|
Pull block driver updates from Jens Axboe:
"Like the core side, not a lot of changes here, just two main items:
- Series of patches (via Coly) with fixes for bcache (Coly,
Christoph)
- MD pull request from Song"
* tag 'for-5.6/drivers-2020-01-27' of git://git.kernel.dk/linux-block: (31 commits)
bcache: reap from tail of c->btree_cache in bch_mca_scan()
bcache: reap c->btree_cache_freeable from the tail in bch_mca_scan()
bcache: remove member accessed from struct btree
bcache: print written and keys in trace_bcache_btree_write
bcache: avoid unnecessary btree nodes flushing in btree_flush_write()
bcache: add code comments for state->pool in __btree_sort()
lib: crc64: include <linux/crc64.h> for 'crc64_be'
bcache: use read_cache_page_gfp to read the superblock
bcache: store a pointer to the on-disk sb in the cache and cached_dev structures
bcache: return a pointer to the on-disk sb from read_super
bcache: transfer the sb_page reference to register_{bdev,cache}
bcache: fix use-after-free in register_bcache()
bcache: properly initialize 'path' and 'err' in register_bcache()
bcache: rework error unwinding in register_bcache
bcache: use a separate data structure for the on-disk super block
bcache: cached_dev_free needs to put the sb page
md/raid1: introduce wait_for_serialization
md/raid1: use bucket based mechanism for IO serialization
md: introduce a new struct for IO serialization
md: don't destroy serial_info_pool if serialize_policy is true
...
|
|
Move blk_queue_make_request() to dm.c:alloc_dev() so that
q->make_request_fn is never NULL during the lifetime of a DM device
(even one that is created without a DM table).
Otherwise generic_make_request() will crash simply by doing:
dmsetup create -n test
mount /dev/dm-N /mnt
While at it, move ->congested_data initialization out of
dm.c:alloc_dev() and into the bio-based specific init method.
Reported-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1860231
Fixes: ff36ab34583a ("dm: remove request-based logic from make_request_fn wrapper")
Depends-on: c12c9a3c3860c ("dm: various cleanups to md->queue initialization code")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When shrink btree node cache from c->btree_cache in bch_mca_scan(),
no matter the selected node is reaped or not, it will be rotated from
the head to the tail of c->btree_cache list. But in bcache journal
code, when flushing the btree nodes with oldest journal entry, btree
nodes are iterated and slected from the tail of c->btree_cache list in
btree_flush_write(). The list_rotate_left() in bch_mca_scan() will
make btree_flush_write() iterate more nodes in c->btree_list in reverse
order.
This patch just reaps the selected btree node cache, and not move it
from the head to the tail of c->btree_cache list. Then bch_mca_scan()
will not mess up c->btree_cache list to btree_flush_write().
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to skip the most recently freed btree node cahce, currently
in bch_mca_scan() the first 3 caches in c->btree_cache_freeable list
are skipped when shrinking bcache node caches in bch_mca_scan(). The
related code in bch_mca_scan() is,
737 list_for_each_entry_safe(b, t, &c->btree_cache_freeable, list) {
738 if (nr <= 0)
739 goto out;
740
741 if (++i > 3 &&
742 !mca_reap(b, 0, false)) {
lines free cache memory
746 }
747 nr--;
748 }
The problem is, if virtual memory code calls bch_mca_scan() and
the calculated 'nr' is 1 or 2, then in the above loop, nothing will
be shunk. In such case, if slub/slab manager calls bch_mca_scan()
for many times with small scan number, it does not help to shrink
cache memory and just wasts CPU cycles.
This patch just selects btree node caches from tail of the
c->btree_cache_freeable list, then the newly freed host cache can
still be allocated by mca_alloc(), and at least 1 node can be shunk.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The member 'accessed' of struct btree is used in bch_mca_scan() when
shrinking btree node caches. The original idea is, if b->accessed is
set, clean it and look at next btree node cache from c->btree_cache
list, and only shrink the caches whose b->accessed is cleaned. Then
only cold btree node cache will be shrunk.
But when I/O pressure is high, it is very probably that b->accessed
of a btree node cache will be set again in bch_btree_node_get()
before bch_mca_scan() selects it again. Then there is no chance for
bch_mca_scan() to shrink enough memory back to slub or slab system.
This patch removes member accessed from struct btree, then once a
btree node ache is selected, it will be immediately shunk. By this
change, bch_mca_scan() may release btree node cahce more efficiently.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
the commit 91be66e1318f ("bcache: performance improvement for
btree_flush_write()") was an effort to flushing btree node with oldest
btree node faster in following methods,
- Only iterate dirty btree nodes in c->btree_cache, avoid scanning a lot
of clean btree nodes.
- Take c->btree_cache as a LRU-like list, aggressively flushing all
dirty nodes from tail of c->btree_cache util the btree node with
oldest journal entry is flushed. This is to reduce the time of holding
c->bucket_lock.
Guoju Fang and Shuang Li reported that they observe unexptected extra
write I/Os on cache device after applying the above patch. Guoju Fang
provideed more detailed diagnose information that the aggressive
btree nodes flushing may cause 10x more btree nodes to flush in his
workload. He points out when system memory is large enough to hold all
btree nodes in memory, c->btree_cache is not a LRU-like list any more.
Then the btree node with oldest journal entry is very probably not-
close to the tail of c->btree_cache list. In such situation much more
dirty btree nodes will be aggressively flushed before the target node
is flushed. When slow SATA SSD is used as cache device, such over-
aggressive flushing behavior will cause performance regression.
After spending a lot of time on debug and diagnose, I find the real
condition is more complicated, aggressive flushing dirty btree nodes
from tail of c->btree_cache list is not a good solution.
- When all btree nodes are cached in memory, c->btree_cache is not
a LRU-like list, the btree nodes with oldest journal entry won't
be close to the tail of the list.
- There can be hundreds dirty btree nodes reference the oldest journal
entry, before flushing all the nodes the oldest journal entry cannot
be reclaimed.
When the above two conditions mixed together, a simply flushing from
tail of c->btree_cache list is really NOT a good idea.
Fortunately there is still chance to make btree_flush_write() work
better. Here is how this patch avoids unnecessary btree nodes flushing,
- Only acquire c->journal.lock when getting oldest journal entry of
fifo c->journal.pin. In rested locations check the journal entries
locklessly, so their values can be changed on other cores
in parallel.
- In loop list_for_each_entry_safe_reverse(), checking latest front
point of fifo c->journal.pin. If it is different from the original
point which we get with locking c->journal.lock, it means the oldest
journal entry is reclaim on other cores. At this moment, all selected
dirty nodes recorded in array btree_nodes[] are all flushed and clean
on other CPU cores, it is unncessary to iterate c->btree_cache any
longer. Just quit the list_for_each_entry_safe_reverse() loop and
the following for-loop will skip all the selected clean nodes.
- Find a proper time to quit the list_for_each_entry_safe_reverse()
loop. Check the refcount value of orignial fifo front point, if the
value is larger than selected node number of btree_nodes[], it means
more matching btree nodes should be scanned. Otherwise it means no
more matching btee nodes in rest of c->btree_cache list, the loop
can be quit. If the original oldest journal entry is reclaimed and
fifo front point is updated, the refcount of original fifo front point
will be 0, then the loop will be quit too.
- Not hold c->bucket_lock too long time. c->bucket_lock is also required
for space allocation for cached data, hold it for too long time will
block regular I/O requests. When iterating list c->btree_cache, even
there are a lot of maching btree nodes, in order to not holding
c->bucket_lock for too long time, only BTREE_FLUSH_NR nodes are
selected and to flush in following for-loop.
With this patch, only btree nodes referencing oldest journal entry
are flushed to cache device, no aggressive flushing for unnecessary
btree node any more. And in order to avoid blocking regluar I/O
requests, each time when btree_flush_write() called, at most only
BTREE_FLUSH_NR btree nodes are selected to flush, even there are more
maching btree nodes in list c->btree_cache.
At last, one more thing to explain: Why it is safe to read front point
of c->journal.pin without holding c->journal.lock inside the
list_for_each_entry_safe_reverse() loop ?
Here is my answer: When reading the front point of fifo c->journal.pin,
we don't need to know the exact value of front point, we just want to
check whether the value is different from the original front point
(which is accurate value because we get it while c->jouranl.lock is
held). For such purpose, it works as expected without holding
c->journal.lock. Even the front point is changed on other CPU core and
not updated to local core, and current iterating btree node has
identical journal entry local as original fetched fifo front point, it
is still safe. Because after holding mutex b->write_lock (with memory
barrier) this btree node can be found as clean and skipped, the loop
will quite latter when iterate on next node of list c->btree_cache.
Fixes: 91be66e1318f ("bcache: performance improvement for btree_flush_write()")
Reported-by: Guoju Fang <fangguoju@gmail.com>
Reported-by: Shuang Li <psymon@bonuscloud.io>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To explain the pages allocated from mempool state->pool can be
swapped in __btree_sort(), because state->pool is a page pool,
which allocates pages by alloc_pages() indeed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid a pointless dependency on buffer heads in bcache by simply open
coding reading a single page. Also add a SB_OFFSET define for the
byte offset of the superblock instead of using magic numbers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows to properly build the superblock bio including the offset in
the page using the normal bio helpers. This fixes writing the superblock
for page sizes larger than 4k where the sb write bio would need an offset
in the bio_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Returning the properly typed actual data structure insteaf of the
containing struct page will save the callers some work going
forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid an extra reference count roundtrip by transferring the sb_page
ownership to the lower level register helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The patch "bcache: rework error unwinding in register_bcache" introduces
a use-after-free regression in register_bcache(). Here are current code,
2510 out_free_path:
2511 kfree(path);
2512 out_module_put:
2513 module_put(THIS_MODULE);
2514 out:
2515 pr_info("error %s: %s", path, err);
2516 return ret;
If some error happens and the above code path is executed, at line 2511
path is released, but referenced at line 2515. Then KASAN reports a use-
after-free error message.
This patch changes line 2515 in the following way to fix the problem,
2515 pr_info("error %s: %s", path?path:"", err);
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Patch "bcache: rework error unwinding in register_bcache" from
Christoph Hellwig changes the local variables 'path' and 'err'
in undefined initial state. If the code in register_bcache() jumps
to label 'out:' or 'out_module_put:' by goto, these two variables
might be reference with undefined value by the following line,
out_module_put:
module_put(THIS_MODULE);
out:
pr_info("error %s: %s", path, err);
return ret;
Therefore this patch initializes these two local variables properly
in register_bcache() to avoid such issue.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split the successful and error return path, and use one goto label for each
resource to unwind. This also fixes some small errors like leaking the
module reference count in the reboot case (which seems entirely harmless)
or printing the wrong warning messages for early failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split out an on-disk version struct cache_sb with the proper endianness
annotations. This fixes a fair chunk of sparse warnings, but there are
some left due to the way the checksum is defined.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Same as cache device, the buffer page needs to be put while
freeing cached_dev. Otherwise a page would be leaked every
time a cached_dev is stopped.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When dm-writecache is used with SSD as a cache device, it would submit a
separate bio for each written block. The I/Os would be merged by the disk
scheduler, but this merging degrades performance.
Improve dm-writecache performance by submitting larger bios - this is
possible as long as there is consecutive free space on the cache
device.
Benchmark (arm64 with 64k page size, using /dev/ram0 as a cache device):
fio --bs=512k --iodepth=32 --size=400M --direct=1 \
--filename=/dev/mapper/cache --rw=randwrite --numjobs=1 --name=test
block old new
size MiB/s MiB/s
---------------------
512 181 700
1k 347 1256
2k 644 2020
4k 1183 2759
8k 1852 3333
16k 2469 3509
32k 2974 3670
64k 3404 3810
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Logical block size has type unsigned short. That means that it can be at
most 32768. However, there are architectures that can run with 64k pages
(for example arm64) and on these architectures, it may be possible to
create block devices with 64k block size.
For exmaple (run this on an architecture with 64k pages):
Mount will fail with this error because it tries to read the superblock using 2-sector
access:
device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536
EXT4-fs (dm-0): unable to read superblock
This patch changes the logical block size from unsigned short to unsigned
int to avoid the overflow.
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a configurable timeout mechanism to disable queue_if_no_path without
assistance from userspace multipathd. This reimplements multipathd's
no_path_retry mechanism in kernel space. This is motivated by the
desire to prevent processes from hanging indefinitely waiting for IO
in cases where multipathd might be unable to respond (after a failure
or for whatever reason).
Despite replicating userspace multipathd's policy configuration in
kernel space, it is important to prevent IOs from hanging forever,
waiting for userspace that may be incapable of behaving correctly.
Use of the provided "queue_if_no_path_timeout_secs" dm-multipath
module parameter is optional. This timeout mechanism is disabled by
default (by being set to 0).
Signed-off-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
With commit fe64369163c5 ("dm thin: don't allow changing data device
during thin-pool load") it is now possible to re-parent the data
device's flush_bio from the pool_c to pool structure. Doing so offers
improved lifetime guarantees for the flush_bio so that the call to
dm_pool_register_pre_commit_callback can now be done safely from
pool_ctr().
Depends-on: fe64369163c5 ("dm thin: don't allow changing data device during thin-pool load")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The existing code allows changing the data device when the thin-pool
target is reloaded.
This capability is not required and only complicates device lifetime
guarantees. This can cause crashes like the one reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1788596
where the kernel tries to issue a flush bio located in a structure that
was already freed.
Take the first step to simplifying the thin-pool's data device lifetime
by disallowing changing it. Like the thin-pool's metadata device, the
data device is now set in pool_create() and it cannot be changed for a
given thin-pool.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-thin uses struct pool to hold the state of the pool. There may be
multiple pool_c's pointing to a given pool, each pool_c represents a
loaded target. pool_c's may be created and destroyed arbitrarily and the
pool contains a reference count of pool_c's pointing to it.
Since commit 694cfe7f31db3 ("dm thin: Flush data device before
committing metadata") a pointer to pool_c is passed to
dm_pool_register_pre_commit_callback and this function stores it in
pmd->pre_commit_context. If this pool_c is freed, but pool is not
(because there is another pool_c referencing it), we end up in a
situation where pmd->pre_commit_context structure points to freed
pool_c. It causes a crash in metadata_pre_commit_callback.
Fix this by moving the dm_pool_register_pre_commit_callback() from
pool_ctr() to pool_preresume(). This way the in-core thin-pool metadata
is only ever armed with callback data whose lifetime matches the
active thin-pool target.
In should be noted that this fix preserves the ability to load a
thin-pool table that uses a different data block device (that contains
the same data) -- though it is unclear if that capability is still
useful and/or needed.
Fixes: 694cfe7f31db3 ("dm thin: Flush data device before committing metadata")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Ensure that the pool is locked during calls to __commit_transaction and
__destroy_persistent_data_objects. Just being consistent with locking,
but reality is dm_pool_metadata_close is called once pool is being
destroyed so access to pool shouldn't be contended.
Also, use pmd_write_lock_in_core rather than __pmd_write_lock in
dm_pool_commit_metadata and rename __pmd_write_lock to
pmd_write_lock_in_core -- there was no need for the alias.
In addition, verify that the pool is locked in __commit_transaction().
Fixes: 873f258becca ("dm thin metadata: do not write metadata if no changes occurred")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When committing state, the function writecache_flush does the following:
1. write metadata (writecache_commit_flushed)
2. flush disk cache (writecache_commit_flushed)
3. wait for data writes to complete (writecache_wait_for_ios)
4. increase superblock seq_count
5. write the superblock
6. flush disk cache
It may happen that at step 3, when we wait for some write to finish, the
disk may report the write as finished, but the write only hit the disk
cache and it is not yet stored in persistent storage. At step 5 we write
the superblock - it may happen that the superblock is written before the
write that we waited for in step 3. If the machine crashes, it may result
in incorrect data being returned after reboot.
In order to fix the bug, we must swap steps 2 and 3 in the above sequence,
so that we first wait for writes to complete and then flush the disk
cache.
Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If benbi IV is used in AEAD construction, for example:
cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256
the constructor uses wrong skcipher function and crashes:
BUG: kernel NULL pointer dereference, address: 00000014
...
EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt]
Call Trace:
? crypt_subkey_size+0x20/0x20 [dm_crypt]
crypt_ctr+0x567/0xfc0 [dm_crypt]
dm_table_add_target+0x15f/0x340 [dm_mod]
Fix this by properly using crypt_aead_blocksize() in this case.
Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # v4.12+
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051
Reported-by: Jerad Simpson <jbsimpson@gmail.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add experimental support for BitLocker encryption with CBC mode and
additional Elephant diffuser.
The mode was used in older Windows systems and it is provided mainly
for compatibility reasons. The userspace support to activate these
devices is being added to cryptsetup utility.
Read-write activation of such a device is very simple, for example:
echo <password> | cryptsetup bitlkOpen bitlk_image.img test
The Elephant diffuser uses two rotations in opposite direction for
data (Diffuser A and B) and also XOR operation with Sector key over
the sector data; Sector key is derived from additional key data. The
original public documentation is available here:
http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf
The dm-crypt implementation is embedded to "elephant" IV (similar to
tcw IV construction).
Because we cannot modify original bio data for write (before
encryption), an additional internal flag to pre-process data is
added.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The space-maps track the reference counts for disk blocks allocated by
both the thin-provisioning and cache targets. There are variants for
tracking metadata blocks and data blocks.
Transactionality is implemented by never touching blocks from the
previous transaction, so we can rollback in the event of a crash.
When allocating a new block we need to ensure the block is free (has
reference count of 0) in both the current and previous transaction.
Prior to this fix we were doing this by searching for a free block in
the previous transaction, and relying on a 'begin' counter to track
where the last allocation in the current transaction was. This
'begin' field was not being updated in all code paths (eg, increment
of a data block reference count due to breaking sharing of a neighbour
block in the same btree leaf).
This fix keeps the 'begin' field, but now it's just a hint to speed up
the search. Instead the current transaction is searched for a free
block, and then the old transaction is double checked to ensure it's
free. Much simpler.
This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when
DM thin-provisioning's snapshots are heavily used.
Reported-by: Eric Wheeler <dm-devel@lists.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Previously, we call check_and_add_serial when serialization is
enabled for write IO, but it could allocate and free memory
back and forth.
Now, let's just get an element from memory pool with the new
function, then insert node to rb tree if no collision happens.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Since raid1 had already used bucket based mechanism to reduce
the conflict between write IO and resync IO, it is possible to
speed up performance for io serialization with refer to the
same mechanism.
To align with the barrier bucket mechanism, we created arrays
(with the same number of BARRIER_BUCKETS_NR) for spinlock, rb
tree and waitqueue. Then we can reduce lock competition with
multiple spinlocks, boost search performance with multiple rb
trees and also reduce thundering herd problem with multiple
waitqueues.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Obviously, IO serialization could cause the degradation of
performance a lot. In order to reduce the degradation, so a
rb interval tree is added in raid1 to speed up the check of
collision.
So, a rb root is needed in md_rdev, then abstract all the
serialize related members to a new struct (serial_in_rdev),
embed it into md_rdev.
Of course, we need to free the struct if it is not needed
anymore, so rdev/rdevs_uninit_serial are added accordingly.
And they should be called when destroty memory pool or can't
alloc memory.
And we need to consider to call mddev_destroy_serial_pool
in case serialize_policy/write-behind is disabled, bitmap
is destroyed or in __md_stop_writes.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
The serial_info_pool is needed if array sets serialize_policy to
true, so don't destroy it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Before dispatch write bio, raid1 array which enables
serialize_policy need to check if overlap exists between
this bio and previous on-flying bios. If there is overlap,
then it has to wait until the collision is disappeared.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
So far, IO serialization is used for two scenarios:
1. raid1 which enables write-behind mode, and there is rdev in the array
which is multi-queue device and flaged with writemostly.
2. IO serialization is enabled or disabled by change serialize_policy.
So introduce rdev_need_serial to check the first scenario. And for 1, IO
serialization is enabled automatically while 2 is controlled manually.
And it is possible that both scenarios are true, so for create serial pool,
rdev/rdevs_init_serial should be separate from check if the pool existed or
not. Then for destroy pool, we need to check if the pool is needed by other
rdevs due to the first scenario.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
With the new sysfs node, we can use it to control if raid1 array
wants io serialization or not. So mddev_create_serial_pool and
mddev_destroy_serial_pool are called in serialize_policy_store
to enable or disable the serialization.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
1. The related resources (spin_lock, list and waitqueue) are needed for
address raid1 reorder overlap issue too, in this case, rdev is set to
NULL for mddev_create/destroy_serial_pool which implies all rdevs need
to handle these resources.
And also add "is_suspend" to mddev_destroy_serial_pool since it will
be called under suspended situation, which also makes both create and
destroy pool have same arguments.
2. Introduce rdevs_init_serial which is called if raid1 io serialization
is enabled since all rdevs need to init related stuffs.
3. rdev_init_serial and clear_bit(CollisionCheck, &rdev->flags) should
be called between suspend and resume.
No need to export mddev_create_serial_pool since it is only called in
md-mod module.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
It actually means create here, so fix the typo.
Reported-by: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Previously, wb_info_pool and wb_list stuffs are introduced
to address potential data inconsistence issue for write
behind device.
Now rename them to serial related name, since the same
mechanism will be used to address reorder overlap write
issue for raid1.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
We can use "cnt" directly to update conf->worker_cnt_per_group
if alloc_thread_groups returns 0.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
In md_bitmap_unplug, bitmap->storage.filemap is double checked.
In md_bitmap_daemon_work, bitmap->storage.filemap should be checked
before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Try to skip prefetching hash blocks that won't be needed due to the
"check_at_most_once" option being enabled and the corresponding data
blocks already having been verified.
Since prefetching operates on a range of data blocks, do this by just
trimming the two ends of the range. This doesn't skip every unneeded
hash block, since data blocks in the middle of the range could also be
unneeded, and hash blocks are still prefetched in large clusters as
controlled by dm_verity_prefetch_cluster. But it can still help a lot.
In a test on Android Q launching 91 apps every 15s repeated 21 times,
prefetching was only done for 447177/4776629 = 9.36% of data blocks.
Tested-by: ruxian.feng <ruxian.feng@transsion.com>
Co-developed-by: yuanjiong.gao <yuanjiong.gao@transsion.com>
Signed-off-by: yuanjiong.gao <yuanjiong.gao@transsion.com>
Signed-off-by: xianrong.zhou <xianrong.zhou@transsion.com>
[EB: simplified the 'while' loops and improved the commit message]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
GFP_KERNEL is not supposed to be or'd with GFP_NOFS (the result is
equivalent to GFP_KERNEL). Also, we use GFP_NOIO instead of GFP_NOFS
because we don't want any I/O being submitted in the direct reclaim
path.
Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
