summaryrefslogtreecommitdiff
path: root/drivers/md/raid1.c
AgeCommit message (Collapse)Author
2020-01-13md/raid1: introduce wait_for_serializationGuoqing Jiang
Previously, we call check_and_add_serial when serialization is enabled for write IO, but it could allocate and free memory back and forth. Now, let's just get an element from memory pool with the new function, then insert node to rb tree if no collision happens. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13md/raid1: use bucket based mechanism for IO serializationGuoqing Jiang
Since raid1 had already used bucket based mechanism to reduce the conflict between write IO and resync IO, it is possible to speed up performance for io serialization with refer to the same mechanism. To align with the barrier bucket mechanism, we created arrays (with the same number of BARRIER_BUCKETS_NR) for spinlock, rb tree and waitqueue. Then we can reduce lock competition with multiple spinlocks, boost search performance with multiple rb trees and also reduce thundering herd problem with multiple waitqueues. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13md: introduce a new struct for IO serializationGuoqing Jiang
Obviously, IO serialization could cause the degradation of performance a lot. In order to reduce the degradation, so a rb interval tree is added in raid1 to speed up the check of collision. So, a rb root is needed in md_rdev, then abstract all the serialize related members to a new struct (serial_in_rdev), embed it into md_rdev. Of course, we need to free the struct if it is not needed anymore, so rdev/rdevs_uninit_serial are added accordingly. And they should be called when destroty memory pool or can't alloc memory. And we need to consider to call mddev_destroy_serial_pool in case serialize_policy/write-behind is disabled, bitmap is destroyed or in __md_stop_writes. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13raid1: serialize the overlap writeGuoqing Jiang
Before dispatch write bio, raid1 array which enables serialize_policy need to check if overlap exists between this bio and previous on-flying bios. If there is overlap, then it has to wait until the collision is disappeared. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-01-13md: rename wb stuffsGuoqing Jiang
Previously, wb_info_pool and wb_list stuffs are introduced to address potential data inconsistence issue for write behind device. Now rename them to serial related name, since the same mechanism will be used to address reorder overlap write issue for raid1. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-12-11md: raid1: check rdev before reference in raid1_sync_request funcZhiqiang Liu
In raid1_sync_request func, rdev should be checked before reference. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-11-11md/raid1: avoid soft lockup under high loadHannes Reinecke
As all I/O is being pushed through a kernel thread the softlockup watchdog might be triggered under high load. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-10-24md: improve handling of bio with REQ_PREFLUSH in md_flush_request()David Jeffery
If pers->make_request fails in md_flush_request(), the bio is lost. To fix this, pass back a bool to indicate if the original make_request call should continue to handle the I/O and instead of assuming the flush logic will push it to completion. Convert md_flush_request to return a bool and no longer calls the raid driver's make_request function. If the return is true, then the md flush logic has or will complete the bio and the md make_request call is done. If false, then the md make_request function needs to keep processing like it is a normal bio. Let the original call to md_handle_request handle any need to retry sending the bio to the raid driver's make_request function should it be needed. Also mark md_flush_request and the make_request function pointer as __must_check to issue warnings should these critical return values be ignored. Fixes: 2bc13b83e629 ("md: batch flush requests.") Cc: stable@vger.kernel.org # # v4.19+ Cc: NeilBrown <neilb@suse.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-03md/raid1: fail run raid1 array when active disk less than oneYufen Yu
When run test case: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force mdadm run fail with kernel message as follow: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run(). Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07raid1: factor out a common routine to handle the completion of sync writeHou Tao
It's just code clean-up. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md: allow last device to be forcibly removed from RAID1/RAID10.Guoqing Jiang
When the 'last' device in a RAID1 or RAID10 reports an error, we do not mark it as failed. This would serve little purpose as there is no risk of losing data beyond that which is obviously lost (as there is with RAID5), and there could be other sectors on the device which are readable, and only readable from this device. This in general this maximises access to data. However the current implementation also stops an admin from removing the last device by direct action. This is rarely useful, but in many case is not harmful and can make automation easier by removing special cases. Also, if an attempt to write metadata fails the device must be marked as faulty, else an infinite loop will result, attempting to update the metadata on all non-faulty devices. So add 'fail_last_dev' member to 'struct mddev', then we can bypasses the 'last disk' checks for RAID1 and RAID10, and control the behavior per array by change sysfs node. Signed-off-by: NeilBrown <neilb@suse.de> [add sysfs node for fail_last_dev by Guoqing] Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md/raid1: end bio when the device faultyYufen Yu
When write bio return error, it would be added to conf->retry_list and wait for raid1d thread to retry write and acknowledge badblocks. In narrow_write_error(), the error bio will be split in the unit of badblock shift (such as one sector) and raid1d thread issues them one by one. Until all of the splited bio has finished, raid1d thread can go on processing other things, which is time consuming. But, there is a scene for error handling that is not necessary. When the device has been set faulty, flush_bio_list() may end bios in pending_bio_list with error status. Since these bios has not been issued to the device actually, error handlding to retry write and acknowledge badblocks make no sense. Even without that scene, when the device is faulty, badblocks info can not be written out to the device. Thus, we also no need to handle the error IO. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07raid1: use an int as the return value of raise_barrier()Hou Tao
Using a sector_t as the return value is misleading, because raise_barrier() only return 0 or -EINTR. Also add comments for the return values of raise_barrier(). Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-06-26md/raid1: Fix a warning message in remove_wb()Dan Carpenter
The WARN_ON() macro doesn't take an error message, it just takes a condition. I've changed this to use WARN(1, "...") instead. Fixes: 3e148a320979 ("md/raid1: fix potential data inconsistency issue with write behind device") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-06-20md/raid1: fix potential data inconsistency issue with write behind deviceGuoqing Jiang
For write-behind mode, we think write IO is complete once it has reached all the non-writemostly devices. It works fine for single queue devices. But for multiqueue device, if there are lots of IOs come from upper layer, then the write-behind device could issue those IOs to different queues, depends on the each queue's delay, so there is no guarantee that those IOs can arrive in order. To address the issue, we need to check the collision among write behind IOs, we can only continue without collision, otherwise wait for the completion of previous collisioned IO. And WBCollision is introduced for multiqueue device which is worked under write-behind mode. But this patch doesn't handle below cases which could have the data inconsistency issue as well, these cases will be handled in later patches. 1. modify max_write_behind by write backlog node. 2. add or remove array's bitmap dynamically. 3. the change of member disk. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-06-15md: raid1-10: Unify r{1,10}bio_pool_freeMarcos Paulo de Souza
Avoiding duplicated code, since they just execute a kfree. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15md/raid1: get rid of extra blank line and spaceYufen Yu
This patch get rid of extra blank line and space, and add necessary space for code. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-15drivers: md: Unify common definitions of raid1 and raid10Marcos Paulo de Souza
These definitions are being moved to raid1-10.c. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 47Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version you should have received a copy of the gnu general public license for example usr src linux copying if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 20 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30block: remove the i argument to bio_for_each_segment_allChristoph Hellwig
We only have two callers that need the integer loop iterator, and they can easily maintain it themselves. Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: David Sterba <dsterba@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-08Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "Not a huge amount of changes in this round, the biggest one is that we finally have Mings multi-page bvec support merged. Apart from that, this pull request contains: - Small series that avoids quiescing the queue for sysfs changes that match what we currently have (Aleksei) - Series of bcache fixes (via Coly) - Series of lightnvm fixes (via Mathias) - NVMe pull request from Christoph. Nothing major, just SPDX/license cleanups, RR mp policy (Hannes), and little fixes (Bart, Chaitanya). - BFQ series (Paolo) - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection for the fast path (Jianchao) - fops->iopoll() added for async IO polling, this is a feature that the upcoming io_uring interface will use (Christoph, me) - Partition scan loop fixes (Dongli) - mtip32xx conversion from managed resource API (Christoph) - cdrom registration race fix (Guenter) - MD pull from Song, two minor fixes. - Various documentation fixes (Marcos) - Multi-page bvec feature. This brings a lot of nice improvements with it, like more efficient splitting, larger IOs can be supported without growing the bvec table size, and so on. (Ming) - Various little fixes to core and drivers" * tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits) block: fix updating bio's front segment size block: Replace function name in string with __func__ nbd: propagate genlmsg_reply return code floppy: remove set but not used variable 'q' null_blk: fix checking for REQ_FUA block: fix NULL pointer dereference in register_disk fs: fix guard_bio_eod to check for real EOD errors blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map block: optimize bvec iteration in bvec_iter_advance block: introduce mp_bvec_for_each_page() for iterating over page block: optimize blk_bio_segment_split for single-page bvec block: optimize __blk_segment_map_sg() for single-page bvec block: introduce bvec_nth_page() iomap: wire up the iopoll method block: add bio_set_polled() helper block: wire up block device iopoll method fs: add an iopoll method to struct file_operations loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part() loop: do not print warn message if partition scan is successful block: bounce: make sure that bvec table is updated ...
2019-02-15block: allow bio_for_each_segment_all() to iterate over multi-page bvecMing Lei
This patch introduces one extra iterator variable to bio_for_each_segment_all(), then we can allow bio_for_each_segment_all() to iterate over multi-page bvec. Given it is just one mechannical & simple change on all bio_for_each_segment_all() users, this patch does tree-wide change in one single patch, so that we can avoid to use a temporary helper for this conversion. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-12md/raid1: don't clear bitmap bits on interrupted recovery.Nate Dailey
sync_request_write no longer submits writes to a Faulty device. This has the unfortunate side effect that bitmap bits can be incorrectly cleared if a recovery is interrupted (previously, end_sync_write would have prevented this). This means the next recovery may not copy everything it should, potentially corrupting data. Add a function for doing the proper md_bitmap_end_sync, called from end_sync_write and the Faulty case in sync_request_write. backport note to 4.14: s/md_bitmap_end_sync/bitmap_end_sync Cc: stable@vger.kernel.org 4.14+ Fixes: 0c9d5b127f69 ("md/raid1: avoid reusing a resync bio after error handling.") Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Tested-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-02-04raid1: simplify raid1_error functionYufen Yu
Remove redundance set_bit and let code simplify. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2018-10-14MD: fix invalid stored role for a disk - try2Shaohua Li
Commit d595567dc4f0 (MD: fix invalid stored role for a disk) broke linear hotadd. Let's only fix the role for disks in raid1/10. Based on Guoqing's original patch. Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-08-01md: Avoid namespace collision with bitmap APIAndy Shevchenko
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-09Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD updates from Shaohua Li: "A few fixes of MD for this merge window. Mostly bug fixes: - raid5 stripe batch fix from Amy - Read error handling for raid1 FailFast device from Gioh - raid10 recovery NULL pointer dereference fix from Guoqing - Support write hint for raid5 stripe cache from Mariusz - Fixes for device hot add/remove from Neil and Yufen - Improve flush bio scalability from Xiao" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix lock contention for flush bios md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe md/raid1: add error handling of read error from FailFast device md: fix NULL dereference of mddev->pers in remove_and_add_spares() raid5: copy write hint from origin bio to stripe md: fix two problems with setting the "re-add" device state. raid10: check bio in r10buf_pool_free to void NULL pointer dereference md: fix an error code format and remove unsed bio_sector
2018-05-30md: convert to bioset_init()/mempool_init()Kent Overstreet
Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-17md/raid1: add error handling of read error from FailFast deviceGioh Kim
Current handle_read_error() function calls fix_read_error() only if md device is RW and rdev does not include FailFast flag. It does not handle a read error from a RW device including FailFast flag. I am not sure it is intended. But I found that write IO error sets rdev faulty. The md module should handle the read IO error and write IO error equally. So I think read IO error should set rdev faulty. Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-01md: fix an error code format and remove unsed bio_sectorYufen Yu
Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-09raid1: copy write hint from master bio to behind bioMariusz Dabrowski
Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com> Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-09md/raid1: exit sync request if MD_RECOVERY_INTR is setYufen Yu
We met a sync thread stuck as follows: raid1_sync_request+0x2c9/0xb50 md_do_sync+0x983/0xfa0 md_thread+0x11c/0x160 kthread+0x111/0x130 ret_from_fork+0x35/0x40 0xffffffffffffffff At the same time, there is a stuck mdadm thread (mdadm --manage /dev/md2 --add /dev/sda). It is trying to stop the sync thread: kthread_stop+0x42/0xf0 md_unregister_thread+0x3a/0x70 md_reap_sync_thread+0x15/0x160 action_store+0x142/0x2a0 md_attr_store+0x6c/0xb0 kernfs_fop_write+0x102/0x180 __vfs_write+0x33/0x170 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x6e/0x190 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Debug tools show that the sync thread is waiting in raise_barrier(), until raid1d() end all normal IO bios into bio_end_io_list(introduced in commit 55ce74d4bfe1). But, raid1d() cannot end these bios if MD_CHANGE_PENDING bit is set. It needs to get mddev->reconfig_mutex lock and then clear the bit in md_check_recovery(). However, the lock is holding by mdadm in action_store(). Thus, there is a loop: mdadm waiting for sync thread to stop, sync thread waiting for raid1d() to end bios, raid1d() waiting for mdadm to release mddev->reconfig_mutex lock and then it can end bios. Fix this by checking MD_RECOVERY_INTR while waiting in raise_barrier(), so that sync thread can exit while mdadm is stoping the sync thread. Fixes: 55ce74d4bfe1 ("md/raid1: ensure device failure recorded before write request returns.") Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-05Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-03-08block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-25md/raid1: fix NULL pointer dereferenceYufen Yu
In handle_write_finished(), if r1_bio->bios[m] != NULL, it thinks the corresponding conf->mirrors[m].rdev is also not NULL. But, it is not always true. Even if some io hold replacement rdev(i.e. rdev->nr_pending.count > 0), raid1_remove_disk() can also set the rdev as NULL. That means, bios[m] != NULL, but mirrors[m].rdev is NULL, resulting in NULL pointer dereference in handle_write_finished and sync_request_write. This patch can fix BUGs as follows: BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 IP: [<ffffffff815bbbbd>] raid1d+0x2bd/0xfc0 PGD 12ab52067 PUD 12f587067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 2008 Comm: md3_raid1 Not tainted 4.1.44+ #130 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 Call Trace: ? schedule+0x37/0x90 ? prepare_to_wait_event+0x83/0xf0 md_thread+0x144/0x150 ? wake_atomic_t_function+0x70/0x70 ? md_start_sync+0xf0/0xf0 kthread+0xd8/0xf0 ? kthread_worker_fn+0x160/0x160 ret_from_fork+0x42/0x70 ? kthread_worker_fn+0x160/0x160 BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 IP: sync_request_write+0x9e/0x980 PGD 800000007c518067 P4D 800000007c518067 PUD 8002b067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 24 PID: 2549 Comm: md3_raid1 Not tainted 4.15.0+ #118 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 Call Trace: ? sched_clock+0x5/0x10 ? sched_clock_cpu+0xc/0xb0 ? flush_pending_writes+0x3a/0xd0 ? pick_next_task_fair+0x4d5/0x5f0 ? __switch_to+0xa2/0x430 raid1d+0x65a/0x870 ? find_pers+0x70/0x70 ? find_pers+0x70/0x70 ? md_thread+0x11c/0x160 md_thread+0x11c/0x160 ? finish_wait+0x80/0x80 kthread+0x111/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ? do_syscall_64+0x6f/0x190 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-17md/raid1: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2017-12-11md/raid1,raid10: silence warning about wait-within-waitNeilBrown
If you prepare_to_wait() after a previous prepare_to_wait(), but before calling schedule(), you get warning: do not call blocking ops when !TASK_RUNNING; state=2 This is appropriate as it is often a bug. The event that the first prepare_to_wait() expects might wake up the schedule following the second prepare_to_wait(), which could be confusing. However if both prepare_to_wait()s are part of simple wait_event() loops, and if the inner one is rarely called, then there is no problem. The inner loop is too simple to get confused by a stray wakeup, and the outer loop won't spin unduly because the inner doesnt affect it often. This pattern occurs in both raid1.c and raid10.c in the use of flush_pending_writes(). The warning can be silenced by setting current->state to TASK_RUNNING. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01md/raid1/10: add missed blk plugShaohua Li
flush_pending_writes isn't always called with block plug, so add it, and plug works in nested way. Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01raid1: remove obsolete code in raid1_write_requestGuoqing Jiang
There are some lines could be removed due to recent change for raid1 such as commit 3956df15d634 ("md: move suspend_hi/lo handling into core md code"). Also, seems some comments are put to wrong place, move them before wait_barrier. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01raid1: prevent freeze_array/wait_all_barriers deadlockNate Dailey
If freeze_array is attempted in the middle of close_sync/ wait_all_barriers, deadlock can occur. freeze_array will wait for nr_pending and nr_queued to line up. wait_all_barriers increments nr_pending for each barrier bucket, one at a time, but doesn't actually issue IO that could be counted in nr_queued. So freeze_array is blocked until wait_all_barriers completes and allow_all_barriers runs. At the same time, when _wait_barrier sees array_frozen == 1, it stops and waits for freeze_array to complete. Prevent the deadlock by making close_sync call _wait_barrier and _allow_barrier for one bucket at a time, instead of deferring the _allow_barrier calls until after all _wait_barriers are complete. Signed-off-by: Nate Dailey <nate.dailey@stratus.com> Fix: fd76863e37fe(RAID1: a new I/O barrier implementation to remove resync window) Reviewed-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org (v4.11) Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: use TASK_IDLE instead of blocking signalsMikulas Patocka
Hi - I submit this patch for the next merge window: Some times ago, I made a patch f9c79bc05a2a that blocks signals around the schedule() calls in MD. The MD subsystem needs to do an uninterruptible sleep that is not accounted in load average - so we block signals and use interruptible sleep. The kernel has a special TASK_IDLE state for this purpose, so we can use it instead of blocking signals. This patch doesn't fix any bug, it just makes the code simpler. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: remove special meaning of ->quiesce(.., 2)NeilBrown
The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: move suspend_hi/lo handling into core md codeNeilBrown
responding to ->suspend_lo and ->suspend_hi is similar to responding to ->suspended. It is best to wait in the common core code without incrementing ->active_io. This allows mddev_suspend()/mddev_resume() to work while requests are waiting for suspend_lo/hi to change. This is will be important after a subsequent patch which uses mddev_suspend() to synchronize updating for suspend_lo/hi. So move the code for testing suspend_lo/hi out of raid1.c and raid5.c, and place it in md.c Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-16md: rename some drivers/md/ files to have an "md-" prefixMike Snitzer
Motivated by the desire to illiminate the imprecise nature of DM-specific patches being unnecessarily sent to both the MD maintainer and mailing-list. Which is born out of the fact that DM files also reside in drivers/md/ Now all MD-specific files in drivers/md/ start with either "raid" or "md-" and the MAINTAINERS file has been updated accordingly. Shaohua: don't change module name Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-16md-cluster: fix wrong condition check in raid1_write_requestGuoqing Jiang
The check used here is to avoid conflict between write and resync, however we used the wrong logic, it should be the inverse of the checking inside "if". Fixes: 589a1c4 ("Suspend writes in RAID1 if within range") Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-07Merge tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD updates from Shaohua Li: "This update mainly fixes bugs: - Make raid5 ppl support several ppl from Pawel - Several raid5-cache bug fixes from Song - Bitmap fixes from Neil and Me - One raid1/10 regression fix since 4.12 from Me - Other small fixes and cleanup" * tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/bitmap: disable bitmap_resize for file-backed bitmaps. raid5-ppl: Recovery support for multiple partial parity logs md: Runtime support for multiple ppls md/raid0: attach correct cgroup info in bio lib/raid6: align AVX512 constants to 512 bits, not bytes raid5: remove raid5_build_block md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_show md: replace seq_release_private with seq_release md: notify about new spare disk in the container md/raid1/10: reset bio allocated from mempool md/raid5: release/flush io in raid5_do_work() md/bitmap: copy correct data for bitmap super
2017-08-28md: Runtime support for multiple pplsPawel Baldysiak
Increase PPL area to 1MB and use it as circular buffer to store PPL. The entry with highest generation number is the latest one. If PPL to be written is larger then space left in a buffer, rewind the buffer to the start (don't wrap it). Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 17:07:43 +0000