summaryrefslogtreecommitdiff
path: root/drivers/md/md.h
AgeCommit message (Collapse)Author
2014-10-14md: remove unwanted white space from md.cNeilBrown
My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-04-09md/bitmap: don't abuse i_writecount for bitmap files.NeilBrown
md bitmap code currently tries to use i_writecount to stop any other process from writing to out bitmap file. But that is really an abuse and has bit-rotted so locking is all wrong. So discard that - root should be allowed to shoot self in foot. Still use it in a much less intrusive way to stop the same file being used as bitmap on two different array, and apply other checks to ensure the file is at least vaguely usable for bitmap storage (is regular, is open for write. Support for ->bmap is already checked elsewhere). Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NeilBrown <neilb@suse.de>
2014-01-20Merge tag 'driver-core-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / sysfs patches from Greg KH: "Here's the big driver core and sysfs patch set for 3.14-rc1. There's a lot of work here moving sysfs logic out into a "kernfs" to allow other subsystems to also have a virtual filesystem with the same attributes of sysfs (handle device disconnect, dynamic creation / removal as needed / unneeded, etc) This is primarily being done for the cgroups filesystem, but the goal is to also move debugfs to it when it is ready, solving all of the known issues in that filesystem as well. The code isn't completed yet, but all should be stable now (there is a big section that was reverted due to problems found when testing) There's also some other smaller fixes, and a driver core addition that allows for a "collection" of objects, that the DRM people will be using soon (it's in this tree to make merges after -rc1 easier) All of this has been in linux-next with no reported issues" * tag 'driver-core-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (113 commits) kernfs: associate a new kernfs_node with its parent on creation kernfs: add struct dentry declaration in kernfs.h kernfs: fix get_active failure handling in kernfs_seq_*() Revert "kernfs: fix get_active failure handling in kernfs_seq_*()" Revert "kernfs: replace kernfs_node->u.completion with kernfs_root->deactivate_waitq" Revert "kernfs: remove KERNFS_ACTIVE_REF and add kernfs_lockdep()" Revert "kernfs: remove KERNFS_REMOVED" Revert "kernfs: restructure removal path to fix possible premature return" Revert "kernfs: invoke kernfs_unmap_bin_file() directly from __kernfs_remove()" Revert "kernfs: remove kernfs_addrm_cxt" Revert "kernfs: make kernfs_get_active() block if the node is deactivated but not removed" Revert "kernfs: implement kernfs_{de|re}activate[_self]()" Revert "kernfs, sysfs, driver-core: implement kernfs_remove_self() and its wrappers" Revert "pci: use device_remove_file_self() instead of device_schedule_callback()" Revert "scsi: use device_remove_file_self() instead of device_schedule_callback()" Revert "s390: use device_remove_file_self() instead of device_schedule_callback()" Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()" Revert "kernfs: remove unnecessary NULL check in __kernfs_remove()" kernfs: remove unnecessary NULL check in __kernfs_remove() drivers/base: provide an infrastructure for componentised subsystems ...
2014-01-14md: fix problem when adding device to read-only array with bitmap.NeilBrown
If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de>
2013-12-11kernfs: s/sysfs_dirent/kernfs_node/ and rename its friends accordinglyTejun Heo
kernfs has just been separated out from sysfs and we're already in full conflict mode. Nothing can make the situation any worse. Let's take the chance to name things properly. This patch performs the following renames. * s/sysfs_elem_dir/kernfs_elem_dir/ * s/sysfs_elem_symlink/kernfs_elem_symlink/ * s/sysfs_elem_attr/kernfs_elem_file/ * s/sysfs_dirent/kernfs_node/ * s/sd/kn/ in kernfs proper * s/parent_sd/parent/ * s/target_sd/target/ * s/dir_sd/parent/ * s/to_sysfs_dirent()/rb_to_kn()/ * misc renames of local vars when they conflict with the above Because md, mic and gpio dig into sysfs details, this patch ends up modifying them. All are sysfs_dirent renames and trivial. While we can avoid these by introducing a dummy wrapping struct sysfs_dirent around kernfs_node, given the limited usage outside kernfs and sysfs proper, I don't think such workaround is called for. This patch is strictly rename only and doesn't introduce any functional difference. - mic / gpio renames were missing. Spotted by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-14Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO core updates from Jens Axboe: "This is the pull request for the core changes in the block layer for 3.13. It contains: - The new blk-mq request interface. This is a new and more scalable queueing model that marries the best part of the request based interface we currently have (which is fully featured, but scales poorly) and the bio based "interface" which the new drivers for high IOPS devices end up using because it's much faster than the request based one. The bio interface has no block layer support, since it taps into the stack much earlier. This means that drivers end up having to implement a lot of functionality on their own, like tagging, timeout handling, requeue, etc. The blk-mq interface provides all these. Some drivers even provide a switch to select bio or rq and has code to handle both, since things like merging only works in the rq model and hence is faster for some workloads. This is a huge mess. Conversion of these drivers nets us a substantial code reduction. Initial results on converting SCSI to this model even shows an 8x improvement on single queue devices. So while the model was intended to work on the newer multiqueue devices, it has substantial improvements for "classic" hardware as well. This code has gone through extensive testing and development, it's now ready to go. A pull request is coming to convert virtio-blk to this model will be will be coming as well, with more drivers scheduled for 3.14 conversion. - Two blktrace fixes from Jan and Chen Gang. - A plug merge fix from Alireza Haghdoost. - Conversion of __get_cpu_var() from Christoph Lameter. - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven. - A fix for a race between request completion and the timeout handling from Jeff Moyer. This is what caused the merge conflict with blk-mq/core, in case you are looking at that. - A dm stacking fix from Mike Snitzer. - A code consolidation fix and duplicated code removal from Kent Overstreet. - A handful of block bug fixes from Mikulas Patocka, fixing a loop crash and memory corruption on blk cg. - Elevator switch bug fix from Tomoki Sekiyama. A heads-up that I had to rebase this branch. Initially the immutable bio_vecs had been queued up for inclusion, but a week later, it became clear that it wasn't fully cooked yet. So the decision was made to pull this out and postpone it until 3.14. It was a straight forward rebase, just pruning out the immutable series and the later fixes of problems with it. The rest of the patches applied directly and no further changes were made" * 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits) block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: Do not call sector_div() with a 64-bit divisor kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup() block: Consolidate duplicated bio_trim() implementations block: Use rw_copy_check_uvector() block: Enable sysfs nomerge control for I/O requests in the plug list block: properly stack underlying max_segment_size to DM device elevator: acquire q->sysfs_lock in elevator_change() elevator: Fix a race in elevator switching and md device initialization block: Replace __get_cpu_var uses bdi: test bdi_init failure block: fix a probe argument to blk_register_region loop: fix crash if blk_alloc_queue fails blk-core: Fix memory corruption if blkcg_init_queue fails block: fix race between request completion and timeout handling blktrace: Send BLK_TN_PROCESS events to all running traces blk-mq: don't disallow request merges for req->special being set blk-mq: mq plug list breakage blk-mq: fix for flush deadlock ...
2013-11-08block: Consolidate duplicated bio_trim() implementationsKent Overstreet
Someone cut and pasted md's md_trim_bio() into xen-blkfront.c. Come on, we should know better than this. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Neil Brown <neilb@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-09-26sysfs: clean up sysfs_get_dirent()Tejun Heo
The pre-existing sysfs interfaces which take explicit namespace argument are weird in that they place the optional @ns in front of @name which is contrary to the established convention. For example, we end up forcing vast majority of sysfs_get_dirent() users to do sysfs_get_dirent(parent, NULL, name), which is silly and error-prone especially as @ns and @name may be interchanged without causing compilation warning. This renames sysfs_get_dirent() to sysfs_get_dirent_ns() and swap the positions of @name and @ns, and sysfs_get_dirent() is now a wrapper around sysfs_get_dirent_ns(). This makes confusions a lot less likely. There are other interfaces which take @ns before @name. They'll be updated by following patches. This patch doesn't introduce any functional changes. v2: EXPORT_SYMBOL_GPL() wasn't updated leading to undefined symbol error on module builds. Reported by build test robot. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27md: avoid deadlock when dirty buffers during md_stop.NeilBrown
When the last process closes /dev/mdX sync_blockdev will be called so that all buffers get flushed. So if it is then opened for the STOP_ARRAY ioctl to be sent there will be nothing to flush. However if we open /dev/mdX in order to send the STOP_ARRAY ioctl just moments before some other process which was writing closes their file descriptor, then there won't be a 'last close' and the buffers might not get flushed. So do_md_stop() calls sync_blockdev(). However at this point it is holding ->reconfig_mutex. So if the array is currently 'clean' then the writes from sync_blockdev() will not complete until the array can be marked dirty and that won't happen until some other thread can get ->reconfig_mutex. So we deadlock. We need to move the sync_blockdev() call to before we take ->reconfig_mutex. However then some other thread could open /dev/mdX and write to it after we call sync_blockdev() and before we actually stop the array. This can leave dirty data in the page cache which is awkward. So introduce new flag MD_STILL_CLOSED. Set it before calling sync_blockdev(), clear it if anyone does open the file, and abort the STOP_ARRAY attempt if it gets set before we lock against further opens. It is still possible to get problems if you open /dev/mdX, write to it, then issue the STOP_ARRAY ioctl. Just don't do that. Signed-off-by: NeilBrown <neilb@suse.de>
2013-08-27md: Don't test all of mddev->flags at once.NeilBrown
mddev->flags is mostly used to record if an update of the metadata is needed. Sometimes the whole field is tested instead of just the important bits. This makes it difficult to introduce more state bits. So replace all bare tests of mddev->flags with tests for the bits that actually need testing. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-26MD: Remember the last sync operation that was performedJonathan Brassow
MD: Remember the last sync operation that was performed This patch adds a field to the mddev structure to track the last sync operation that was performed. This is especially useful when it comes to what is recorded in mismatch_cnt in sysfs. If the last operation was "data-check", then it reports the number of descrepancies found by the user-initiated check. If it was a "repair" operation, then it is reporting the number of descrepancies repaired. etc. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-04-24MD: Export 'md_reap_sync_thread' functionJonathan Brassow
MD: Export 'md_reap_sync_thread' function Make 'md_reap_sync_thread' available to other files, specifically dm-raid.c. - rename reap_sync_thread to md_reap_sync_thread - move the fn after md_check_recovery to match md.h declaration placement - export md_reap_sync_thread Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-03-20MD: Prevent sysfs operations on uninitialized kobjectsJonathan Brassow
MD: Prevent sysfs operations on uninitialized kobjects Device-mapper does not use sysfs; but when device-mapper is leveraging MD's RAID personalities, MD sometimes attempts to update sysfs. This patch adds checks for 'mddev-kobj.sd' in sysfs_[un]link_rdev to ensure it is about to operate on something valid. This patch also checks for 'mddev->kobj.sd' before calling 'sysfs_notify' in 'remove_and_add_spares'. Although 'sysfs_notify' already makes this check, doing so in 'remove_and_add_spares' prevents an additional mutex operation. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-12-18Merge tag 'md-3.8' of git://neil.brown.name/mdLinus Torvalds
Pull md update from Neil Brown: "Mostly just little fixes. Probably biggest part is AVX accelerated RAID6 calculations." * tag 'md-3.8' of git://neil.brown.name/md: md/raid5: add blktrace calls md/raid5: use async_tx_quiesce() instead of open-coding it. md: Use ->curr_resync as last completed request when cleanly aborting resync. lib/raid6: build proper files on corresponding arch lib/raid6: Add AVX2 optimized gen_syndrome functions lib/raid6: Add AVX2 optimized recovery functions md: Update checkpoint of resync/recovery based on time. md:Add place to update ->recovery_cp. md.c: re-indent various 'switch' statements. md: close race between removing and adding a device. md: removed unused variable in calc_sb_1_csm.
2012-12-13md: Use ->curr_resync as last completed request when cleanly aborting resync.majianpeng
If a resync is aborted cleanly, ->curr_resync is a reliable record of where we got up to. If there was an error it is less reliable but we always know that ->curr_resync_completed is safe. So add a flag MD_RECOVERY_ERROR to differentiate between these cases and set recovery_cp accordingly. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-11-30wait: add wait_event_lock_irq() interfaceLukas Czerner
New wait_event{_interruptible}_lock_irq{_cmd} macros added. This commit moves the private wait_event_lock_irq() macro from MD to regular wait includes, introduces new macro wait_event_lock_irq_cmd() instead of using the old method with omitting cmd parameter which is ugly and makes a use of new macros in the MD. It also introduces the _interruptible_ variant. The use of new interface is when one have a special lock to protect data structures used in the condition, or one also needs to invoke "cmd" before putting it to sleep. All new macros are expected to be called with the lock taken. The lock is released before sleep and is reacquired afterwards. We will leave the macro with the lock held. Note to DM: IMO this should also fix theoretical race on waitqueue while using simultaneously wait_event_lock_irq() and wait_event() because of lack of locking around current state setting and wait queue removal. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-11Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid racesJianpeng Ma
Now that multiple threads can handle stripes, it is safer to use an atomic64_t for resync_mismatches, to avoid update races. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11MD: change the parameter of md threadShaohua Li
Change the thread parameter, so the thread can carry extra info. Next patch will use it. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31blk: pass from_schedule to non-request unplug functions.NeilBrown
This will allow md/raid to know why the unplug was called, and will be able to act according - if !from_schedule it is safe to perform tasks which could themselves schedule. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31blk: centralize non-request unplug handling.NeilBrown
Both md and umem has similar code for getting notified on an blk_finish_plug event. Centralize this code in block/ and allow each driver to provide its distinctive difference. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31md: remove plug_cnt feature of plugging.NeilBrown
This seemed like a good idea at the time, but after further thought I cannot see it making a difference other than very occasionally and testing to try to exercise the case it is most likely to help did not show any performance difference by removing it. So remove the counting of active plugs and allow 'pending writes' to be activated at any time, not just when no plugs are active. This is only relevant when there is a write-intent bitmap, and the updating of the bitmap will likely introduce enough delay that the single-threading of bitmap updates will be enough to collect large numbers of updates together. Removing this will make it easier to centralise the unplug code, and will clear the other for other unplug enhancements which have a measurable effect. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-22md/bitmap: add new 'space' attribute for bitmaps.NeilBrown
If we are to allow bitmaps to be resized when the array is resized, we need to know how much space there is. So create an attribute to store this information and set appropriate defaults. It can be set more precisely via sysfs, or future metadata extensions may allow it to be recorded. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22md: dm-raid should call helper function to clear rdev.NeilBrown
dm-raid currently open-codes the freeing of some members of and rdev. It is more maintainable to have it call common code from md.c which does this for all call-sites. So remove free_disk_sb to md_rdev_clear, export it, and use it in dm-raid.c Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21md: add possibility to change data-offset for devices.NeilBrown
When reshaping we can avoid costly intermediate backup by changing the 'start' address of the array on the device (if there is enough room). So as a first step, allow such a change to be requested through sysfs, and recorded in v1.x metadata. (As we didn't previous check that all 'pad' fields were zero, we need a new FEATURE flag for this. A (belatedly) check that all remaining 'pad' fields are zero to avoid a repeat of this) The new data offset must be requested separately for each device. This allows each to have a different change in the data offset. This is not likely to be used often but as data_offset can be set per-device, new_data_offset should be too. This patch also removes the 'acknowledged' arg to rdev_set_badblocks as it is never used and never will be. At the same time we add a new arg ('in_new') which is currently always zero but will be used more soon. When a reshape finishes we will need to update the data_offset and rdev->sectors. So provide an exported function to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-21md: allow a reshape operation to be reversed.NeilBrown
Currently a reshape operation always progresses from the start of the array to the end unless the number of devices is being reduced, in which case it progressed in the opposite direction. To reverse a partial reshape which changes the number of devices you can stop the array and re-assemble with the raid-disks numbers reversed and it will undo. However for a reshape that does not change the number of devices it is not possible to reverse the reshape in the middle - you have to wait until it completes. So add a 'reshape_direction' attribute with is either 'forwards' or 'backwards' and can be explicitly set when delta_disks is zero. This will become more important when we allow the data_offset to change in a reshape. Then the explicit statement of what direction is being used will be more useful. This can be enabled in raid5 trivially as it already supports reverse reshape and just needs to use a different trigger to request it. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19md/raid10: handle merge_bvec_fn in member devices.NeilBrown
Currently we don't honour merge_bvec_fn in member devices so if there is one, we force all requests to be single-page at most. This is not ideal. So enhance the raid10 merge_bvec_fn to check that function in children as well. This introduces a small problem. There is no locking around calls the ->merge_bvec_fn and subsequent calls to ->make_request. So a device added between these could end up getting a request which violates its merge_bvec_fn. Currently the best we can do is synchronize_sched(). This will work providing no preemption happens. If there is preemption, we just have to hope that new devices are largely consistent with old devices. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19md: tidy up rdev_for_each usage.NeilBrown
md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23md: create externally visible flags for supporting hot-replace.NeilBrown
hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23md: change hot_remove_disk to take an rdev rather than a number.NeilBrown
Soon an array will be able to have multiple devices with the same raid_disk number (an original and a replacement). So removing a device based on the number won't work. So pass the actual device handle instead. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-10-19Merge branch 'v3.1-rc10' into for-3.2/coreJens Axboe
Conflicts: block/blk-core.c include/linux/blkdev.h Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-11md: rename "mdk_personality" to "md_personality"NeilBrown
"mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: remove typedefs: mdk_thread_t -> struct md_threadNeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: remove typedefs: mddev_t -> struct mddevNeilBrown
Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: removing typedefs: mdk_rdev_t -> struct md_rdevNeilBrown
The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21trival: md_k.h should be md.h in the beginning comment of file md.hWang Sheng-Hui
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-21md: Avoid waking up a thread after it has been freed.NeilBrown
Two related problems: 1/ some error paths call "md_unregister_thread(mddev->thread)" without subsequently clearing ->thread. A subsequent call to mddev_unlock will try to wake the thread, and crash. 2/ Most calls to md_wakeup_thread are protected against the thread disappeared either by: - holding the ->mutex - having an active request, so something else must be keeping the array active. However mddev_unlock calls md_wakeup_thread after dropping the mutex and without any certainty of an active request, so the ->thread could theoretically disappear. So we need a spinlock to provide some protections. So change md_unregister_thread to take a pointer to the thread pointer, and ensure that it always does the required locking, and clears the pointer properly. Reported-by: "Moshe Melnikov" <moshe@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de> cc: stable@kernel.org
2011-09-12block: remove support for bio remapping from ->make_requestChristoph Hellwig
There is very little benefit in allowing to let a ->make_request instance update the bios device and sector and loop around it in __generic_make_request when we can archive the same through calling generic_make_request from the driver and letting the loop in generic_make_request handle it. Note that various drivers got the return value from ->make_request and returned non-zero values for errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-28md: make it easier to wait for bad blocks to be acknowledged.NeilBrown
It is only safe to choose not to write to a bad block if that bad block is safely recorded in metadata - i.e. if it has been 'acknowledged'. If it hasn't we need to wait for the acknowledgement. We support that using rdev->blocked wait and md_wait_for_blocked_rdev by introducing a new device flag 'BlockedBadBlock'. This flag is only advisory. It is cleared whenever we acknowledge a bad block, so that a waiter can re-check the particular bad blocks that it is interested it. It should be set by a caller when they find they need to wait. This (set after test) is inherently racy, but as md_wait_for_blocked_rdev already has a timeout, losing the race will have minimal impact. When we clear "Blocked" was also clear "BlockedBadBlocks" incase it was set incorrectly (see above race). We also modify the way we manage 'Blocked' to fit better with the new handling of 'BlockedBadBlocks' and to make it consistent between externally managed and internally managed metadata. This requires that each raidXd loop checks if the metadata needs to be written and triggers a write (md_check_recovery) if needed. Otherwise a queued write request might cause raidXd to wait for the metadata to write, and only that thread can write it. Before writing metadata, we set FaultRecorded for all devices that are Faulty, then after writing the metadata we clear Blocked for any device for which the Fault was certainly Recorded. The 'faulty' device flag now appears in sysfs if the device is faulty *or* it has unacknowledged bad blocks. So user-space which does not understand bad blocks can continue to function correctly. User space which does, should not assume a device is faulty until it sees the 'faulty' flag, and then sees the list of unacknowledged bad blocks is empty. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28md: add 'write_error' flag to component devices.NeilBrown
If a device has ever seen a write error, we will want to handle known-bad-blocks differently. So create an appropriate state flag and export it via sysfs. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
2011-07-28md/raid1: avoid reading from known bad blocks.NeilBrown
Now that we have a bad block list, we should not read from those blocks. There are several main parts to this: 1/ read_balance needs to check for bad blocks, and return not only the chosen device, but also how many good blocks are available there. 2/ fix_read_error needs to avoid trying to read from bad blocks. 3/ read submission must be ready to issue multiple reads to different devices as different bad blocks on different devices could mean that a single large read cannot be served by any one device, but can still be served by the array. This requires keeping count of the number of outstanding requests per bio. This count is stored in 'bi_phys_segments' 4/ retrying a read needs to also be ready to submit a smaller read and queue another request for the rest. This does not yet handle bad blocks when reading to perform resync, recovery, or check. 'md_trim_bio' will also be used for RAID10, so put it in md.c and export it. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28md: load/store badblock list from v1.x metadataNeilBrown
Space must have been allocated when array was created. A feature flag is set when the badblock list is non-empty, to ensure old kernels don't load and trust the whole device. We only update the on-disk badblocklist when it has changed. If the badblocklist (or other metadata) is stored on a bad block, we don't cope very well. If metadata has no room for bad block, flag bad-blocks as disabled, and do the same for 0.90 metadata. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28md: beginnings of bad block management.NeilBrown
This the first step in allowing md to track bad-blocks per-device so that we can fail individual blocks rather than the whole device. This patch just adds a data structure for recording bad blocks, with routines to add, remove, search the list. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com>
2011-07-27MD bitmap: Revert DM dirty log hooksJonathan Brassow
Revert most of commit e384e58549a2e9a83071ad80280c1a9053cfd84c md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log. MD should not need to use DM's dirty log - we decided to use md's bitmaps instead. Keeping the DIV_ROUND_UP clean-ups that were part of commit e384e58549a2e9a83071ad80280c1a9053cfd84c, however. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27md: change managed of recovery_disabled.NeilBrown
If we hit a read error while recovering a mirror, we want to abort the recovery without necessarily failing the disk - as having a disk this a read error is better than not having an array at all. Currently this is managed with a per-array flag "recovery_disabled" and is only implemented for RAID1. For RAID10 we will need finer grained control as we might want to disable recovery for individual devices separately. So push more of the decision making into the personality. 'recovery_disabled' is now a 'cookie' which is copied when the personality want to disable recovery and is changed when a device is added to the array as this is used as a trigger to 'try recovery again'. This will allow RAID10 to get the control that it needs. Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-27md: introduce link/unlink_rdev() helpersNamhyung Kim
There are places where sysfs links to rdev are handled in a same way. Add the helper functions to consolidate them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-09MD: support initial bitmap creation in-kernelJonathan Brassow
Add bitmap support to the device-mapper specific metadata area. This patch allows the creation of the bitmap metadata area upon initial array creation via device-mapper. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-06-08MD: add sync_super to mddev_t structJonathan Brassow
Add the 'sync_super' function pointer to MD array structure (struct mddev_s) If device-mapper (dm-raid.c) is to define its own on-disk superblock and be able to load it, there must still be a way for MD to initiate superblock updates. The simplest way to make this happen is to provide a pointer in the MD array structure that can be set by device-mapper (or other module) with a function to do this. If the function has been set, it will be used; otherwise, the method with be looked up via 'super_types' as usual. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18md: provide generic support for handling unplug callbacks.NeilBrown
When an md device adds a request to a queue, it can call mddev_check_plugged. If this succeeds then we know that the md thread will be woken up shortly, and ->plug_cnt will be non-zero until then, so some processing can be delayed. If it fails, then no unplug callback is expected and the make_request function needs to do whatever is required to make the request happen. Signed-off-by: NeilBrown <neilb@suse.de>
2011-04-18md - remove old plugging code.NeilBrown
md has some plugging infrastructure for RAID5 to use because the normal plugging infrastructure required a 'request_queue', and when called from dm, RAID5 doesn't have one of those available. This relied on the ->unplug_fn callback which doesn't exist any more. So remove all of that code, both in md and raid5. Subsequent patches with restore the plugging functionality. Signed-off-by: NeilBrown <neilb@suse.de>