| Age | Commit message (Collapse) | Author |
|---|
|
Reference to a device in device-mapper table contains offset in sectors.
If the sector_t is 32bit integer (CONFIG_LBDAF is not set), then
several device-mapper targets can overflow this offset and validity
check is then performed on a wrong offset and a wrong table is activated.
See for example (on 32bit without CONFIG_LBDAF) this overflow:
# dmsetup create test --table "0 2048 linear /dev/sdg 4294967297"
# dmsetup table test
0 2048 linear 8:96 1
This patch adds explicit check for overflow if the offset is sector_t type.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: Scott Bauer <Scott.Bauer@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
This target's kernel module being named dm-unstripe.ko doesn't allow
lvm2's DM module autoload capability to load the dm-unstripe.ko
because lvm2 looks for dm-unstriped.ko due to the target name being
"unstriped".
Add the "dm-unstriped" module alias to resolve this oversight.
NOTE: this isn't needed for the "striped" target, despite its source
file being named dm-stripe.c, because it is part of dm-mod.ko.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Address "FIXME: must support non power of 2 chunk_size, dm-stripe.c does".
Bump target version to indicate change.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Scott Bauer <Scott.Bauer@intel.com>
Reviewed-by: Scott Bauer <Scott.Bauer@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Since the unstripe target takes a target length which is the
size of *one* striped member we're trying to expose, not the
total size of *all* the striped members, the check does not
make sense and fails for some striped setups.
For example, say we have a 4TB striped device:
or 3907018496 sectors per underlying device:
if (sector_div(width, uc->stripes)) :
3907018496 / 2(num stripes) == 1953509248
tmp_len = width;
if (sector_div(tmp_len, uc->chunk_size)) :
1953509248 / 256(chunk size) == 7630895.5
(fails)
Fix this by removing the first check which isn't valid for unstriping.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
This device mapper "unstriped" target remaps and unstripes I/O so it
is issued solely on a single drive in a HW RAID0 or dm-striped target.
In a 4 drive HW RAID0 the striped target exposes 1/4th of the LBA range
as a virtual drive. Each I/O to that virtual drive will only be issued
to the 1 drive that was selected of the 4 drives in the HW RAID0.
This unstriped target is most useful for Intel NVMe drives that have
multiple cores but that do not have firmware control to pin separate LBA
ranges to each discrete cpu core.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
