summaryrefslogtreecommitdiff
path: root/drivers/md/dm-log-writes.c
AgeCommit message (Collapse)Author
2019-07-09dm log writes: fix incorrect comment about the logged sequence exampleQu Wenruo
dm-log-writes records the sequence of completion, not submission, thus for the following sequence (W=write, C=complete): Wa,Wb,Wc,Cc,Ca,FLUSH,FUAd,Cb,CFLUSH,CFUAd The logged results in log device should be: c,a,b,flush,fua Fix the comment to give a better example. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-09dm log writes: use struct_size() to calculate size of pending_blockZhengyuan Liu
Use struct_size() to avoid open-coded equivalent that is prone to a type mistake. Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm log writes: make sure super sector log updates are written in orderzhangyi (F)
Currently, although we submit super bios in order (and super.nr_entries is incremented by each logged entry), submit_bio() is async so each super sector may not be written to log device in order and then the final nr_entries may be smaller than it should be. This problem can be reproduced by the xfstests generic/455 with ext4: QA output created by 455 -Silence is golden +mark 'end' does not exist Fix this by serializing submission of super sectors to make sure each is written to the log disk in order. Fixes: 0e9cebe724597 ("dm: add log writes target") Cc: stable@vger.kernel.org Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-05-22dax: Introduce a ->copy_to_iter dax operationDan Williams
Similar to the ->copy_from_iter() operation, a platform may want to deploy an architecture or device specific routine for handling reads from a dax_device like /dev/pmemX. On x86 this routine will point to a machine check safe version of copy_to_iter(). For now, add the plumbing to device-mapper and the dax core. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-10Merge tag 'libnvdimm-for-4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This cycle was was not something I ever want to repeat as there were several late changes that have only now just settled. Half of the branch up to commit d2c997c0f145 ("fs, dax: use page->mapping to warn...") have been in -next for several releases. The of_pmem driver and the address range scrub rework were late arrivals, and the dax work was scaled back at the last moment. The of_pmem driver missed a previous merge window due to an oversight. A sense of obligation to rectify that miss is why it is included for 4.17. It has acks from PowerPC folks. Stephen reported a build failure that only occurs when merging it with your latest tree, for now I have fixed that up by disabling modular builds of of_pmem. A test merge with your tree has received a build success report from the 0day robot over 156 configs. An initial version of the ARS rework was submitted before the merge window. It is self contained to libnvdimm, a net code reduction, and passing all unit tests. The filesystem-dax changes are based on the wait_var_event() functionality from tip/sched/core. However, late review feedback showed that those changes regressed truncate performance to a large degree. The branch was rewound to drop the truncate behavior change and now only includes preparation patches and cleanups (with full acks and reviews). The finalization of this dax-dma-vs-trnucate work will need to wait for 4.18. Summary: - A rework of the filesytem-dax implementation provides for detection of unmap operations (truncate / hole punch) colliding with in-progress device-DMA. A fix for these collisions remains a work-in-progress pending resolution of truncate latency and starvation regressions. - The of_pmem driver expands the users of libnvdimm outside of x86 and ACPI to describe an implementation of persistent memory on PowerPC with Open Firmware / Device tree. - Address Range Scrub (ARS) handling is completely rewritten to account for the fact that ARS may run for 100s of seconds and there is no platform defined way to cancel it. ARS will now no longer block namespace initialization. - The NVDIMM Namespace Label implementation is updated to handle label areas as small as 1K, down from 128K. - Miscellaneous cleanups and updates to unit test infrastructure" * tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits) libnvdimm, of_pmem: workaround OF_NUMA=n build error nfit, address-range-scrub: add module option to skip initial ars nfit, address-range-scrub: rework and simplify ARS state machine nfit, address-range-scrub: determine one platform max_ars value powerpc/powernv: Create platform devs for nvdimm buses doc/devicetree: Persistent memory region bindings libnvdimm: Add device-tree based driver libnvdimm: Add of_node to region and bus descriptors libnvdimm, region: quiet region probe libnvdimm, namespace: use a safe lookup for dimm device name libnvdimm, dimm: fix dpa reservation vs uninitialized label area libnvdimm, testing: update the default smart ctrl_temperature libnvdimm, testing: Add emulation for smart injection commands nfit, address-range-scrub: introduce nfit_spa->ars_state libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device' nfit, address-range-scrub: fix scrub in-progress reporting dax, dm: allow device-mapper to operate without dax support dax: introduce CONFIG_DAX_DRIVER fs, dax: use page->mapping to warn if truncate collides with a busy page ext2, dax: introduce ext2_dax_aops ...
2018-04-04dm: remove fmode_t argument from .prepare_ioctl hookMike Snitzer
Use the fmode_t that is passed to dm_blk_ioctl() rather than inconsistently (varies across targets) drop it on the floor by overriding it with the fmode_t stored in 'struct dm_dev'. All the persistent reservation functions weren't using the fmode_t they got back from .prepare_ioctl so remove them. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm log writes: record metadata flag for better flags recordQu Wenruo
So developer could distinguish data and metadata bios easier. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm: allow targets to return output from messages they are sentMike Snitzer
Could be useful for a target to return stats or other information. If a target does DMEMIT() anything to @result from its .message method then it must return 1 to the caller. Signed-off-By: Mike Snitzer <snitzer@redhat.com>
2018-04-03dax, dm: allow device-mapper to operate without dax supportDan Williams
Change device-mapper's DAX dependency to require the presence of at least one DAX_DRIVER. This allows device-mapper to be built without bringing the DAX core along which is especially wasteful when there are no DAX drivers, like BLK_DEV_PMEM, configured. Cc: Alasdair Kergon <agk@redhat.com> Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-17dm log writes: fix max length used for kstrndupMa Shimiao
If source string is longer than max, kstrndup will allocate max+1 space. So make sure the result will not exceed max. Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-10dm log writes: add support for DAXRoss Zwisler
Now that we have the ability log filesystem writes using a flat buffer, add support for DAX. The motivation for this support is the need for an xfstest that can test the new MAP_SYNC DAX flag. By logging the filesystem activity with dm-log-writes we can show that the MAP_SYNC page faults are writing out their metadata as they happen, instead of requiring an explicit msync/fsync. Unfortunately we can't easily track data that has been written via mmap() now that the dax_flush() abstraction was removed by commit c3ca015fab6d ("dax: remove the pmem_dax_ops->flush abstraction"). Otherwise we could just treat each flush as a big write, and store the data that is being synced to media. It may be worthwhile to add the dax_flush() entry point back, just as a notifier so we can do this logging. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-10dm log writes: add support for inline data buffersRoss Zwisler
Currently dm-log-writes supports writing filesystem data via BIOs, and writing internal metadata from a flat buffer via write_metadata(). For DAX writes, though, we won't have a BIO, but will instead have an iterator that we'll want to use to fill a flat data buffer. So, create write_inline_data() which allows us to write filesystem data using a flat buffer as a source, and wire it up in log_one_block(). Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-14Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-09-11dm log writes: fix >512b sectorsize supportJosef Bacik
512b sectors vs device's physical sectorsize was not maintained consistently and as such the support for >512b sector devices has bugs. The log metadata expects native sectorsize but 512b sectors were being stored. Also, device's sectorsize was assumed when assigning the bi_sector for blocks that were being logged. Fix this up by adding two helpers to convert between bio and dev sectors, and use these in the appropriate places to fix the problem and make it clear which units go where. Doing so allows dm-log-writes use with 4k devices. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-09-11dm log writes: don't use all the cpu while waiting to log blocksJosef Bacik
The check to see if the logging kthread needs to go to sleep is wrong, it checks lc->pending_blocks, which will be non-0 if there are any blocks that are pending, whether they are ready to be logged or not. What we really want is to go to sleep until it's time to log blocks, so change this check so we do actually go to sleep in between flushes. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09dm: change ->end_io calling conventionChristoph Hellwig
Turn the error paramter into a pointer so that target drivers can change the value, and make sure only DM_ENDIO_* values are returned from the methods. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09dm: don't return errnos from ->mapChristoph Hellwig
Instead use the special DM_MAPIO_KILL return value to return -EIO just like we do for the request based path. Note that dm-log-writes returned -ENOMEM in a few places, which now becomes -EIO instead. No consumer treats -ENOMEM special so this shouldn't be an issue (and it should use a mempool to start with to make guaranteed progress). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-07Merge branch 'for-4.9/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the main pull request for block layer changes in 4.9. As mentioned at the last merge window, I've changed things up and now do just one branch for core block layer changes, and driver changes. This avoids dependencies between the two branches. Outside of this main pull request, there are two topical branches coming as well. This pull request contains: - A set of fixes, and a conversion to blk-mq, of nbd. From Josef. - Set of fixes and updates for lightnvm from Matias, Simon, and Arnd. Followup dependency fix from Geert. - General fixes from Bart, Baoyou, Guoqing, and Linus W. - CFQ async write starvation fix from Glauber. - Add supprot for delayed kick of the requeue list, from Mike. - Pull out the scalable bitmap code from blk-mq-tag.c and make it generally available under the name of sbitmap. Only blk-mq-tag uses it for now, but the blk-mq scheduling bits will use it as well. From Omar. - bdev thaw error progagation from Pierre. - Improve the blk polling statistics, and allow the user to clear them. From Stephen. - Set of minor cleanups from Christoph in block/blk-mq. - Set of cleanups and optimizations from me for block/blk-mq. - Various nvme/nvmet/nvmeof fixes from the various folks" * 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits) fs/block_dev.c: return the right error in thaw_bdev() nvme: Pass pointers, not dma addresses, to nvme_get/set_features() nvme/scsi: Remove power management support nvmet: Make dsm number of ranges zero based nvmet: Use direct IO for writes admin-cmd: Added smart-log command support. nvme-fabrics: Add host_traddr options field to host infrastructure nvme-fabrics: revise host transport option descriptions nvme-fabrics: rework nvmf_get_address() for variable options nbd: use BLK_MQ_F_BLOCKING blkcg: Annotate blkg_hint correctly cfq: fix starvation of asynchronous writes blk-mq: add flag for drivers wanting blocking ->queue_rq() blk-mq: remove non-blocking pass in blk_mq_map_request blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue() block: export bio_free_pages to other modules lightnvm: propagate device_add() error code lightnvm: expose device geometry through sysfs lightnvm: control life of nvm_dev in driver blk-mq: register device instead of disk ...
2016-09-22block: export bio_free_pages to other modulesGuoqing Jiang
bio_free_pages is introduced in commit 1dfa0f68c040 ("block: add a helper to free bio bounce buffer pages"), we can reuse the func in other modules after it was imported. Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@fb.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-30dm log writes: fix check of kthread_run() return valueVladimir Zapolskiy
The kthread_run() function returns either a valid task_struct or ERR_PTR() value, check for NULL is invalid. This change fixes potential for oops, e.g. in OOM situation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2016-08-30dm log writes: fix bug with too large biosMikulas Patocka
bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector entries. However, the incoming bio may have more vector entries if it was allocated by other means. For example, bcache submits bios with more than BIO_MAX_PAGES entries. This results in bio_alloc() failure. To avoid the failure, change the code so that it allocates bio with at most BIO_MAX_PAGES entries. If the incoming bio has more entries, bio_add_page() will fail and a new bio will be allocated - the code that handles bio_add_page() failure already exists in the dm-log-writes target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Josef Bacik <jbacik@fb,com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v4.1+
2016-08-30dm log writes: move IO accounting earlier to fix error pathMikulas Patocka
Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to fix a bug that the target hangs if bio_alloc() fails. The error path does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before invoking the error path to avoid underflow of lc->io_blocks. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Josef Bacik <jbacik@fb,com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie
To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07dm: use bio op accessorsMike Christie
Separate the op from the rq_flag_bits and have dm set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-22dm: rename target's per_bio_data_size to per_io_data_sizeMike Snitzer
Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-31dm: refactor ioctl handlingChristoph Hellwig
This moves the call to blkdev_ioctl and the argument checking to DM core code, and only leaves a callout to find the block device to operate on in the targets. This simplifies the code and allows us to pass through ioctl-like command using other methods in the next patch. Also split out a helper around calling the prepare_ioctl method that will be reused for persistent reservation handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-09-02Merge tag 'dm-4.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper update from Mike Snitzer: - a couple small cleanups in dm-cache, dm-verity, persistent-data's dm-btree, and DM core. - a 4.1-stable fix for dm-cache that fixes the leaking of deferred bio prison cells - a 4.2-stable fix that adds feature reporting for the dm-stats features added in 4.2 - improve DM-snapshot to not invalidate the on-disk snapshot if snapshot device write overflow occurs; but a write overflow triggered through the origin device will still invalidate the snapshot. - optimize DM-thinp's async discard submission a bit now that late bio splitting has been included in block core. - switch DM-cache's SMQ policy lock from using a mutex to a spinlock; improves performance on very low latency devices (eg. NVMe SSD). - document DM RAID 4/5/6's discard support [ I did not pull the slab changes, which weren't appropriate for this tree, and weren't obviously the right thing to do anyway. At the very least they need some discussion and explanation before getting merged. Because not pulling the actual tagged commit but doing a partial pull instead, this merge commit thus also obviously is missing the git signature from the original tag ] * tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix use after freeing migrations dm cache: small cleanups related to deferred prison cell cleanup dm cache: fix leaking of deferred bio prison cells dm raid: document RAID 4/5/6 discard support dm stats: report precise_timestamps and histogram in @stats_list output dm thin: optimize async discard submission dm snapshot: don't invalidate on-disk image on snapshot write overflow dm: remove unlikely() before IS_ERR() dm: do not override error code returned from dm_get_device() dm: test return value for DM_MAPIO_SUBMITTED dm verity: remove unused mempool dm cache: move wake_waker() from free_migrations() to where it is needed dm btree remove: remove unused function get_nr_entries() dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling() dm cache policy smq: change the mutex to a spinlock
2015-08-13block: kill merge_bvec_fn() completelyKent Overstreet
As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-12dm: do not override error code returned from dm_get_device()Vivek Goyal
Some of the device mapper targets override the error code returned by dm_get_device() and return either -EINVAL or -ENXIO. There is nothing gained by this override. It is better to propagate the returned error code unchanged to caller. This work was motivated by hitting an issue where the underlying device was busy but -EINVAL was being returned. After this change we get -EBUSY instead and it is easier to figure out the problem. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-29dm log writes: use ULL suffix for 64-bit constantsGeert Uytterhoeven
On 32-bit: drivers/md/dm-log-writes.c: In function ‘log_super’: drivers/md/dm-log-writes.c:323: warning: integer constant is too large for ‘long’ type Add a ULL suffix to WRITE_LOG_MAGIC to fix this. Also add a ULL suffix to WRITE_LOG_VERSION as it's stored in a __le64 field. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15dm: add log writes targetJosef Bacik
Introduce a new target that is meant for file system developers to test file system integrity at particular points in the life of a file system. We capture all write requests and associated data and log them to a separate device for later replay. There is a userspace utility to do this replay. The idea behind this is to give file system developers a tool to verify that the file system is always consistent. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Zach Brown <zab@zabbo.net> Signed-off-by: Mike Snitzer <snitzer@redhat.com>