summaryrefslogtreecommitdiff
path: root/drivers/md/bcache/sysfs.c
AgeCommit message (Collapse)Author
2020-05-27bcache: Convert pr_<level> uses to a more typical styleJoe Perches
Remove the trailing newline from the define of pr_fmt and add newlines to the uses. Miscellanea: o Convert bch_bkey_dump from multiple uses of pr_err to pr_cont as the earlier conversion was inappropriate done causing multiple lines to be emitted where only a single output line was desired o Use vsprintf extension %pV in bch_cache_set_error to avoid multiple line output where only a single line output was desired o Coalesce formats Fixes: 6ae63e3501c4 ("bcache: replace printk() by pr_*() routines") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-22bcache: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-01bcache: add readahead cache policy options via sysfs interfaceColy Li
In year 2007 high performance SSD was still expensive, in order to save more space for real workload or meta data, the readahead I/Os for non-meta data was bypassed and not cached on SSD. In now days, SSD price drops a lot and people can find larger size SSD with more comfortable price. It is unncessary to alway bypass normal readahead I/Os to save SSD space for now. This patch adds options for readahead data cache policies via sysfs file /sys/block/bcache<N>/readahead_cache_policy, the options are, - "all": cache all readahead data I/Os. - "meta-only": only cache meta data, and bypass other regular I/Os. If users want to make bcache continue to only cache readahead request for metadata and bypass regular data readahead, please set "meta-only" to this sysfs file. By default, bcache will back to cache all read- ahead requests now. Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13bcache: add idle_max_writeback_rate sysfs interfaceColy Li
For writeback mode, if there is no regular I/O request for a while, the writeback rate will be set to the maximum value (1TB/s for now). This is good for most of the storage workload, but there are still people don't what the maximum writeback rate in I/O idle time. This patch adds a sysfs interface file idle_max_writeback_rate to permit people to disable maximum writeback rate. Then the minimum writeback rate can be advised by writeback_rate_minimum in the bcache device's sysfs interface. Reported-by: Christian Balzer <chibi@gol.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Two NVMe pull requests: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." - controller reset and namespace scan races fixes - nvme discovery log change uevent support - naming improvements from Keith - multiple discovery controllers reject fix from James - some regular cleanups from various people - Series fixing (and re-fixing) null_blk debug printing and nr_devices checks (André) - A few pull requests from Song, with fixes from Andy, Guoqing, Guilherme, Neil, Nigel, and Yufen. - REQ_OP_ZONE_RESET_ALL support (Chaitanya) - Bio merge handling unification (Christoph) - Pick default elevator correctly for devices with special needs (Damien) - Block stats fixes (Hou) - Timeout and support devices nbd fixes (Mike) - Series fixing races around elevator switching and device add/remove (Ming) - sed-opal cleanups (Revanth) - Per device weight support for BFQ (Fam) - Support for blk-iocost, a new model that can properly account cost of IO workloads. (Tejun) - blk-cgroup writeback fixes (Tejun) - paride queue init fixes (zhengbin) - blk_set_runtime_active() cleanup (Stanley) - Block segment mapping optimizations (Bart) - lightnvm fixes (Hans/Minwoo/YueHaibing) - Various little fixes and cleanups * tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits) null_blk: format pr_* logs with pr_fmt null_blk: match the type of parameter nr_devices null_blk: do not fail the module load with zero devices block: also check RQF_STATS in blk_mq_need_time_stamp() block: make rq sector size accessible for block stats bfq: Fix bfq linkage error raid5: use bio_end_sector in r5_next_bio raid5: remove STRIPE_OPS_REQ_PENDING md: add feature flag MD_FEATURE_RAID0_LAYOUT md/raid0: avoid RAID0 data corruption due to layout confusion. raid5: don't set STRIPE_HANDLE to stripe which is in batch list raid5: don't increment read_errors on EILSEQ return nvmet: fix a wrong error status returned in error log page nvme: send discovery log page change events to userspace nvme: add uevent variables for controller devices nvme: enable aen regardless of the presence of I/O queues nvme-fabrics: allow discovery subsystems accept a kato nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery() nvme: Remove redundant assignment of cq vector nvme: Assign subsys instance from first ctrl ...
2019-09-03bcache: add cond_resched() in __bch_cache_cmp()Shile Zhang
Read /sys/fs/bcache/<uuid>/cacheN/priority_stats can take very long time with huge cache after long run. Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Tested-by: Heitor Alves de Siqueira <halves@canonical.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-09bcache: Revert "bcache: use sysfs_match_string() instead of ↵Coly Li
__sysfs_match_string()" This reverts commit 89e0341af082dbc170019f908846f4a424efc86b. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Peifeng Lin <pflin@suse.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-28bcache: add reclaimed_journal_buckets to struct cache_setColy Li
Now we have counters for how many times jouranl is reclaimed, how many times cached dirty btree nodes are flushed, but we don't know how many jouranl buckets are really reclaimed. This patch adds reclaimed_journal_buckets into struct cache_set, this is an increasing only counter, to tell how many journal buckets are reclaimed since cache set runs. From all these three counters (reclaim, reclaimed_journal_buckets, flush_write), we can have idea how well current journal space reclaim code works. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-28bcache: remove retry_flush_write from struct cache_setColy Li
In struct cache_set, retry_flush_write is added for commit c4dc2497d50d ("bcache: fix high CPU occupancy during journal") which is reverted in previous patch. Now it is useless anymore, and this patch removes it from bcache code. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-28bcache: avoid a deadlock in bcache_reboot()Coly Li
It is quite frequently to observe deadlock in bcache_reboot() happens and hang the system reboot process. The reason is, in bcache_reboot() when calling bch_cache_set_stop() and bcache_device_stop() the mutex bch_register_lock is held. But in the process to stop cache set and bcache device, bch_register_lock will be acquired again. If this mutex is held here, deadlock will happen inside the stopping process. The aftermath of the deadlock is, whole system reboot gets hung. The fix is to avoid holding bch_register_lock for the following loops in bcache_reboot(), list_for_each_entry_safe(c, tc, &bch_cache_sets, list) bch_cache_set_stop(c); list_for_each_entry_safe(dc, tdc, &uncached_devices, list) bcache_device_stop(&dc->disk); A module range variable 'bcache_is_reboot' is added, it sets to true in bcache_reboot(). In register_bcache(), if bcache_is_reboot is checked to be true, reject the registration by returning -EBUSY immediately. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-28bcache: fix mistaken sysfs entry for io_error counterColy Li
In bch_cached_dev_files[] from driver/md/bcache/sysfs.c, sysfs_errors is incorrectly inserted in. The correct entry should be sysfs_io_errors. This patch fixes the problem and now I/O errors of cached device can be read from /sys/block/bcache<N>/bcache/io_errors. Fixes: c7b7bd07404c5 ("bcache: add io_disable to struct cached_dev") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-28bcache: add return value check to bch_cached_dev_run()Coly Li
This patch adds return value check to bch_cached_dev_run(), now if there is error happens inside bch_cached_dev_run(), it can be catched. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-28bcache: use sysfs_match_string() instead of __sysfs_match_string()Alexandru Ardelean
The arrays (of strings) that are passed to __sysfs_match_string() are static, so use sysfs_match_string() which does an implicit ARRAY_SIZE() over these arrays. Functionally, this doesn't change anything. The change is more cosmetic. It only shrinks the static arrays by 1 byte each. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-13bcache: only set BCACHE_DEV_WB_RUNNING when cached device attachedColy Li
When people set a writeback percent via sysfs file, /sys/block/bcache<N>/bcache/writeback_percent current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags and schedules kworker dc->writeback_rate_update. If there is no cache set attached to, the writeback kernel thread is not running indeed, running dc->writeback_rate_update does not make sense and may cause NULL pointer deference when reference cache set pointer inside update_writeback_rate(). This patch checks whether the cache set point (dc->disk.c) is NULL in sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and schedule dc->writeback_rate_update when dc->disk.c is not NULL (it means the cache device is attached to a cache set). This problem might be introduced from initial bcache commit, but commit 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly") changes part of the original code piece, so I add 'Fixes: 3fd47bfe55b0' to indicate from which commit this patch can be applied. Fixes: 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly") Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Bjørn Forsman <bjorn.forsman@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-24bcache: fix inaccurate result of unused bucketsGuoju Fang
To get the amount of unused buckets in sysfs_priority_stats, the code count the buckets which GC_SECTORS_USED is zero. It's correct and should not be overwritten by the count of buckets which prio is zero. Signed-off-by: Guoju Fang <fangguoju@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input overflow to cache set sysfs file io_error_halflifeColy Li
Cache set sysfs entry io_error_halflife is used to set c->error_decay. c->error_decay is in type unsigned int, and it is converted by strtoul_or_return(), therefore overflow to c->error_decay is possible for a large input value. This patch fixes the overflow by using strtoul_safe_clamp() to convert input string to an unsigned long value in range [0, UINT_MAX], then divides by 88 and set it to c->error_decay. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input overflow to cache set io_error_limitColy Li
c->error_limit is in type unsigned int, it is set via cache set sysfs file io_error_limit. Inside the bcache code, input string is converted by strtoul_or_return() and set the converted value to c->error_limit. Because the converted value is unsigned long, and c->error_limit is unsigned int, if the input is large enought, overflow will happen to c->error_limit. This patch uses sysfs_strtoul_clamp() to convert input string, and set the range in [0, UINT_MAX] to avoid the potential overflow. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input overflow to journal_delay_msColy Li
c->journal_delay_ms is in type unsigned short, it is set via sysfs interface and converted by sysfs_strtoul() from input string to unsigned short value. Therefore overflow to unsigned short might be happen when the converted value exceed USHRT_MAX. e.g. writing 65536 into sysfs file journal_delay_ms, c->journal_delay_ms is set to 0. This patch uses sysfs_strtoul_clamp() to convert the input string and limit value range in [0, USHRT_MAX], to avoid the input overflow. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input overflow to writeback_rate_minimumColy Li
dc->writeback_rate_minimum is type unsigned integer variable, it is set via sysfs interface, and converte from input string to unsigned integer by d_strtoul_nonzero(). When the converted input value is larger than UINT_MAX, overflow to unsigned integer happens. This patch fixes the overflow by using sysfs_strotoul_clamp() to convert input string and limit the value in range [1, UINT_MAX], then the overflow can be avoided. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix potential div-zero error of writeback_rate_p_term_inverseColy Li
Current code already uses d_strtoul_nonzero() to convert input string to an unsigned integer, to make sure writeback_rate_p_term_inverse won't be zero value. But overflow may happen when converting input string to an unsigned integer value by d_strtoul_nonzero(), then dc->writeback_rate_p_term_inverse can still be set to 0 even if the sysfs file input value is not zero, e.g. 4294967296 (a.k.a UINT_MAX+1). If dc->writeback_rate_p_term_inverse is set to 0, it might cause a dev-zero error in following code from __update_writeback_rate(), int64_t proportional_scaled = div_s64(error, dc->writeback_rate_p_term_inverse); This patch replaces d_strtoul_nonzero() by sysfs_strtoul_clamp() and limit the value range in [1, UINT_MAX]. Then the unsigned integer overflow and dev-zero error can be avoided. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix potential div-zero error of writeback_rate_i_term_inverseColy Li
dc->writeback_rate_i_term_inverse can be set via sysfs interface. It is in type unsigned int, and convert from input string by d_strtoul(). The problem is d_strtoul() does not check valid range of the input, if 4294967296 is written into sysfs file writeback_rate_i_term_inverse, an overflow of unsigned integer will happen and value 0 is set to dc->writeback_rate_i_term_inverse. In writeback.c:__update_writeback_rate(), there are following lines of code, integral_scaled = div_s64(dc->writeback_rate_integral, dc->writeback_rate_i_term_inverse); If dc->writeback_rate_i_term_inverse is set to 0 via sysfs interface, a div-zero error might be triggered in the above code. Therefore we need to add a range limitation in the sysfs interface, this is what this patch does, use sysfs_stroul_clamp() to replace d_strtoul() and restrict the input range in [1, UINT_MAX]. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input overflow to writeback_delayColy Li
Sysfs file writeback_delay is used to configure dc->writeback_delay which is type unsigned int. But bcache code uses sysfs_strtoul() to convert the input string, therefore it might be overflowed if the input value is too large. E.g. input value is 4294967296 but indeed 0 is set to dc->writeback_delay. This patch uses sysfs_strtoul_clamp() to convert the input string and set the result value range in [0, UINT_MAX] to avoid such unsigned integer overflow. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: use sysfs_strtoul_bool() to set bit-field variablesColy Li
When setting bcache parameters via sysfs, there are some variables are defined as bit-field value. Current bcache code in sysfs.c uses either d_strtoul() or sysfs_strtoul() to convert the input string to unsigned integer value and set it to the corresponded bit-field value. The problem is, the bit-field value only takes the lowest bit of the converted value. If input is 2, the expected value (like bool value) of the bit-field value should be 1, but indeed it is 0. The following sysfs files for bit-field variables have such problem, bypass_torture_test, for dc->bypass_torture_test writeback_metadata, for dc->writeback_metadata writeback_running, for dc->writeback_running verify, for c->verify key_merging_disabled, for c->key_merging_disabled gc_always_rewrite, for c->gc_always_rewrite btree_shrinker_disabled,for c->shrinker_disabled copy_gc_enabled, for c->copy_gc_enabled This patch uses sysfs_strtoul_bool() to set such bit-field variables, then if the converted value is non-zero, the bit-field variables will be set to 1, like setting a bool value like expensive_debug_checks. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input overflow to sequential_cutoffColy Li
People may set sequential_cutoff of a cached device via sysfs file, but current code does not check input value overflow. E.g. if value 4294967295 (UINT_MAX) is written to file sequential_cutoff, its value is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value will be 0. This is an unexpected behavior. This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert input string to unsigned integer value, and limit its range in [0, UINT_MAX]. Then the input overflow can be fixed. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: fix input integer overflow of congested thresholdColy Li
Cache set congested threshold values congested_read_threshold_us and congested_write_threshold_us can be set via sysfs interface. These two values are 'unsigned int' type, but sysfs interface uses strtoul to convert input string. So if people input a large number like 9999999999, the value indeed set is 1410065407, which is not expected behavior. This patch replaces sysfs_strtoul() by sysfs_strtoul_clamp() when convert input string to unsigned int value, and set value range in [0, UINT_MAX], to avoid the above integer overflow errors. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: export backing_dev_uuid via sysfsColy Li
When there are multiple bcache devices, after a reboot the name of bcache devices may change (e.g. current /dev/bcache1 was /dev/bcache0 before reboot). Therefore we need the backing device UUID (sb.uuid) to identify each bcache device. Backing device uuid can be found by program bcache-super-show, but directly exporting backing_dev_uuid by sysfs file /sys/block/bcache<?>/bcache/backing_dev_uuid is a much simpler method. With backing_dev_uuid, and partition uuids from /dev/disk/by-partuuid/, now we can identify each bcache device and its partitions conveniently. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-09bcache: export backing_dev_name via sysfsColy Li
This patch export dc->backing_dev_name to sysfs file /sys/block/bcache<?>/bcache/backing_dev_name, then people or user space tools may know the backing device name of this bcache device. Of cause it can be done by parsing sysfs links, but this method can be much simpler to find the link between bcache device and backing device. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-13bcache: set writeback_percent in a flexible rangeColy Li
Because CUTOFF_WRITEBACK is defined as 40, so before the changes of dynamic cutoff writeback values, writeback_percent is limited to [0, CUTOFF_WRITEBACK]. Any value larger than CUTOFF_WRITEBACK will be fixed up to 40. Now cutof writeback limit is a dynamic value bch_cutoff_writeback, so the range of writeback_percent can be a more flexible range as [0, bch_cutoff_writeback]. The flexibility is, it can be expended to a larger or smaller range than [0, 40], depends on how value bch_cutoff_writeback is specified. The default value is still strongly recommended to most of users for most of workloads. But for people who want to do research on bcache writeback perforamnce tuning, they may have chance to specify more flexible writeback_percent in range [0, 70]. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-13bcache: make cutoff_writeback and cutoff_writeback_sync tunableColy Li
Currently the cutoff writeback and cutoff writeback sync thresholds are defined by CUTOFF_WRITEBACK (40) and CUTOFF_WRITEBACK_SYNC (70) as static values. Most of time these they work fine, but when people want to do research on bcache writeback mode performance tuning, there is no chance to modify the soft and hard cutoff writeback values. This patch introduces two module parameters bch_cutoff_writeback_sync and bch_cutoff_writeback which permit people to tune the values when loading bcache.ko. If they are not specified by module loading, current values CUTOFF_WRITEBACK_SYNC and CUTOFF_WRITEBACK will be used as default and nothing changes. When people want to tune this two values, - cutoff_writeback can be set in range [1, 70] - cutoff_writeback_sync can be set in range [1, 90] - cutoff_writeback always <= cutoff_writeback_sync The default values are strongly recommended to most of users for most of workloads. Anyway, if people wants to take their own risk to do research on new writeback cutoff tuning for their own workload, now they can make it. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-13bcache: option to automatically run gc thread after writebackColy Li
The option gc_after_writeback is disabled by default, because garbage collection will discard SSD data which drops cached data. Echo 1 into /sys/fs/bcache/<UUID>/internal/gc_after_writeback will enable this option, which wakes up gc thread when writeback accomplished and all cached data is clean. This option is helpful for people who cares writing performance more. In heavy writing workload, all cached data can be clean only happens when writeback thread cleans all cached data in I/O idle time. In such situation a following gc running may help to shrink bcache B+ tree and discard more clean data, which may be helpful for future writing requests. If you are not sure whether this is helpful for your own workload, please leave it as disabled by default. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-13bcache: introduce force_wake_up_gc()Coly Li
Garbage collection thread starts to work when c->sectors_to_gc is negative value, otherwise nothing will happen even the gc thread is woken up by wake_up_gc(). force_wake_up_gc() sets c->sectors_to_gc to -1 before calling wake_up_gc(), then gc thread may have chance to run if no one else sets c->sectors_to_gc to a positive value before gc_should_run(). This routine can be called where the gc thread is woken up and required to run in force. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-13bcache: cannot set writeback_running via sysfs if no writeback kthread createdShenghui Wang
"echo 1 > writeback_running" marks writeback_running even if no writeback kthread created as "d_strtoul(writeback_running)" will simply set dc-> writeback_running without checking the existence of dc->writeback_thread. Add check for setting writeback_running via sysfs: if no writeback kthread available, reject setting to 1. v2 -> v3: * Make message on wrong assignment more clear. * Print name of bcache device instead of name of backing device. Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-13bcache: update comment in sysfs.cShenghui Wang
We have struct cached_dev allocated by kzalloc in register_bcache(), which initializes all the fields of cached_dev with 0s. And commit ce4c3e19e520 ("bcache: Replace bch_read_string_list() by __sysfs_match_string()") has remove the string "default". Update the comment. Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-08bcache: Populate writeback_rate_minimum attributeBen Peddell
Forgot to include the maintainers with my first email. Somewhere between Michael Lyle's original "bcache: PI controller for writeback rate V2" patch dated 07 Sep 2017 and 1d316e6 bcache: implement PI controller for writeback rate, the mapping of the writeback_rate_minimum attribute was dropped. Re-add the missing sysfs writeback_rate_minimum attribute mapping to "allow the user to specify a minimum rate at which dirty blocks are retired." Fixes: 1d316e6 ("bcache: implement PI controller for writeback rate") Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-11bcache: add static const prefix to char * array declarationsColy Li
This patch declares char * array with const prefix in sysfs.c, which is suggested by checkpatch.pl. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-11bcache: style fixes for lines over 80 charactersColy Li
This patch fixes the lines over 80 characters into more lines, to minimize warnings by checkpatch.pl. There are still some lines exceed 80 characters, but it is better to be a single line and I don't change them. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-11bcache: style fix to add a blank line after declarationsColy Li
Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-11bcache: style fix to replace 'unsigned' by 'unsigned int'Coly Li
This patch fixes warning reported by checkpatch.pl by replacing 'unsigned' with 'unsigned int'. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-10bcache: fix error setting writeback_rate through sysfs interfaceColy Li
Commit ea8c5356d390 ("bcache: set max writeback rate when I/O request is idle") changes struct bch_ratelimit member rate from uint32_t to atomic_long_t and uses atomic_long_set() in drivers/md/bcache/sysfs.c to set new writeback rate, after the input is converted from memory buf to long int by sysfs_strtoul_clamp(). The above change has a problem because there is an implicit return inside sysfs_strtoul_clamp() so the following atomic_long_set() won't be called. This error is detected by 0day system with following snipped smatch warnings: drivers/md/bcache/sysfs.c:271 __cached_dev_store() error: uninitialized symbol 'v'. 270 sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @271 atomic_long_set(&dc->writeback_rate.rate, v); This patch fixes the above error by using strtoul_safe_clamp() to convert the input buffer into a long int type result. Fixes: ea8c5356d390 ("bcache: set max writeback rate when I/O request is idle") Cc: Kai Krakow <kai@kaishome.de> Cc: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-09bcache: make the pr_err statement used for ENOENT only in sysfs_attatch sectionShenghui Wang
The pr_err statement in the code for sysfs_attatch section would run for various error codes, which maybe confusing. E.g, Run the command twice: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach [the backing dev got attached on the first run] echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach In dmesg, after the command run twice, we can get: bcache: bch_cached_dev_attach() Can't attach sda6: already attached bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\ a8df5e8be891 : cache set not found The first statement in the message was right, but the second was confusing. bch_cached_dev_attach has various pr_ statements for various error codes, except ENOENT. After the change, rerun above command twice: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach In dmesg we only got: bcache: bch_cached_dev_attach() Can't attach sda6: already attached No confusing "cache set not found" message anymore. And for some not exist SET-UUID: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be898 > \ /sys/block/bcache0/bcache/attach In dmesg we can get: bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\ a8df5e8be898 : cache set not found Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-09bcache: set max writeback rate when I/O request is idleColy Li
Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Kai Krakow <kai@kaishome.de> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-09bcache: display rate debug parameters to 0 when writeback is not runningColy Li
When writeback is not running, writeback rate should be 0, other value is misleading. And the following dyanmic writeback rate debug parameters should be 0 too, rate, proportional, integral, change otherwise they are misleading when writeback is not running. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-28bcache: Replace bch_read_string_list() by __sysfs_match_string()Andy Shevchenko
Kernel library has a common function to match user input from sysfs against an array of strings. Thus, replace bch_read_string_list() by __sysfs_match_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28bcache: Move couple of functions to sysfs.cAndy Shevchenko
There is couple of functions that are used exclusively in sysfs.c. Move it to there and make them static. Besides above, it will allow further clean up. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28bcache: Move couple of string arrays to sysfs.cAndy Shevchenko
There is couple of string arrays that are used exclusively in sysfs.c. Move it to there and make them static. Besides above, it will allow further clean up. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18bcache: add io_disable to struct cached_devColy Li
If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18bcache: fix incorrect sysfs output value of strip sizeTang Junhui
Stripe size is shown as zero when no strip in back end device: [root@ceph132 ~]# cat /sys/block/sdd/bcache/stripe_size 0.0k Actually it should be 1T Bytes (1 << 31 sectors), but in sysfs interface, stripe_size was changed from sectors to bytes, and move 9 bits left, so the 32 bits variable overflows. This patch change the variable to a 64 bits type before moving bits. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18bcache: add stop_when_cache_set_failed option to backing deviceColy Li
When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-18bcache: add CACHE_SET_IO_DISABLE to struct cache_set flagsColy Li
When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Cc: Pavel Vazharov <freakpv@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 15:41:10 +0000