| Age | Commit message (Collapse) | Author |
|---|
|
The num_cells variable is only used in the dev_dbg print,
but we can directly use the ret variable which also includes the same
value.
Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bar number is found in reg2 within the gdd. Therefore
we need to change the assigment from reg1 to reg2 which
is the correct location.
Signed-off-by: Andreas Werner <andreas.werner@men.de>
Fixes: '3764e82e5' drivers: Introduce MEN Chameleon Bus
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replaced ioremap with devm_ioremap and request_mem_region with
devm_request_mem_region. This makes the code much more cleaner.
Signed-off-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mcb_bus structure previously was released in mcb_release_bus. This lead to
the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2032 at drivers/base/core.c:251 device_release+0x73/0x90
Device 'mcb:0' does not have a release() function, it is broken and must be fixed.
Modules linked in: men_z135_uart mcb_pci(-) mcb
CPU: 1 PID: 2032 Comm: rmmod Not tainted 4.6.0-rc4+ #3
Hardware name: N/A N/A/COMe-mBTi10, BIOS MVV1R921 X64 10/14/2015
00000286 00000286 c0117de4 c12d6f16 c0117e2c c18be0d3 c0117dfc c104f6e1
000000fb f5ccbe08 f5ccbe00 f5c64600 c0117e18 c104f728 00000009 00000000
c0117e10 c18db674 c0117e2c c0117e3c c13ce5c3 c18be0d3 000000fb c18db674
Call Trace:
[<c12d6f16>] dump_stack+0x47/0x61
[<c104f6e1>] __warn+0xc1/0xe0
[<c104f728>] warn_slowpath_fmt+0x28/0x30
[<c13ce5c3>] device_release+0x73/0x90
[<c12d92e4>] kobject_release+0x34/0x80
[<c12d929d>] ? kobject_del+0x2d/0x40
[<c12d9205>] kobject_put+0x25/0x50
[<c13ce77f>] put_device+0xf/0x20
[<c13d114b>] klist_devices_put+0xb/0x10
[<c1752673>] klist_next+0x73/0xf0
[<c13d1140>] ? unbind_store+0x100/0x100
[<f8a23370>] ? mcb_bus_add_devices+0x30/0x30 [mcb]
[<c13d0a81>] bus_for_each_dev+0x51/0x80
[<f8a23319>] mcb_release_bus+0x19/0x40 [mcb]
[<f8a23370>] ? mcb_bus_add_devices+0x30/0x30 [mcb]
[<f8a2b033>] mcb_pci_remove+0x13/0x20 [mcb_pci]
[<c130d358>] pci_device_remove+0x28/0xb0
[<c13d201b>] __device_release_driver+0x7b/0x110
[<c13d2847>] driver_detach+0x87/0x90
[<c13d1b9b>] bus_remove_driver+0x3b/0x80
[<c13d2ed0>] driver_unregister+0x20/0x50
[<c130be53>] pci_unregister_driver+0x13/0x60
[<f8a2b1f4>] mcb_pci_driver_exit+0xd/0xf [mcb_pci]
[<c10be588>] SyS_delete_module+0x138/0x200
[<c1159208>] ? ____fput+0x8/0x10
[<c1068054>] ? task_work_run+0x74/0x90
[<c1001879>] do_fast_syscall_32+0x69/0x120
[<c1757597>] sysenter_past_esp+0x40/0x6a
---[ end trace 1ed34c2aa3019875 ]---
Release a mcb_bus' memory on the device's release callback, to avoid above
warning.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Export information about the bus stored in the FPGA's header to userspace via
sysfs, instead of hiding it in pr_debug()s from everyone.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mcb bus' device member wasn't correctly initialized and thus wasn't placed
correctly into the driver model.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Destroy mcb_ida on module_unload
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is an error path in mcb_pci_probe() where
it returns zero instead of error code.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a MCB PCI Carrier device is IO mapped insted of memory-mapped,
the memory of the PCI device is still not unmapped.
Also the patch adds deallocation of the bus
if chameleon_parse_cells() fails.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code here is checking for IS_ERR() when request_mem_region() only
returns NULL on error and never an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a MCB PCI Carrier device is IO mapped insted of memory-mapped (which is
currently unsupported by the upstream driver) the probe function bails out
with -ENOTSUPP.
In this case the memory of the PCI device was not unmapped.
Also rename error label to reflect what will happen at the destination (suggested
by Julia Lawall <julia.lawall@lip6.fr>.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently it is not possible to have a kernel with built-in MCB attached
devices. This results out of the fact that mcb-pci requests PCI BAR 0, then
parses the chameleon table and calls the driver's probe function before
releasing BAR 0 again. When building the kernel with modules this is not a
problem (and therefore it wasn't detected by my tests yet).
A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device.
0x200 bytes is the maximum size of a Chameleon v2 Table.
Also this patch stops disabling the PCI device on successful registration of MCB
devices.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for shared PCI IRQs to mcb and mcb-pci.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
chameleon_parse_cells() bails out if chameleon descriptor type is
invalid but does not free the storage 'header' points to.
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make mcb depend on HAS_IOMEM and mcb-pci depend on PCI. This fixes build errors
discovered by the 0-day kernel build testing system.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Coverage builds found this build fail in ARM ebsa110_defconfig:
drivers/mcb/mcb-parse.c: In function 'chameleon_parse_cells':
drivers/mcb/mcb-parse.c:105:2: error: implicit declaration of function 'memcpy_fromio' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/mcb/mcb-parse.o] Error 1
A simple bisect will output this:
3764e82e5150d87b205c10cd78a9c9ab86fbfa51 is the first bad commit
commit 3764e82e5150d87b205c10cd78a9c9ab86fbfa51
Author: Johannes Thumshirn <johannes.thumshirn@men.de>
Date: Wed Feb 26 17:29:05 2014 +0100
drivers: Introduce MEN Chameleon Bus
The above commit used "default m" which is wrong. New drivers
should never be globally enabled with "default y/m". Whether
this driver makes sense to build on ARM is an independent issue.
Here we delete the "default m" line, which is the equivalent of
"default n".
Cc: Johannes Thumshirn <johannes.thumshirn@men.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for MCB over PCI devices. Both PCI attached on-board Chameleon FPGAs
as well as CompactPCI based MCB carrier cards are supported with this driver.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MCB (MEN Chameleon Bus) is a Bus specific to MEN Mikroelektronik
FPGA based devices. It is used to identify MCB based IP-Cores within
an FPGA and provide the necessary framework for instantiating drivers
for these devices.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
