summaryrefslogtreecommitdiff
path: root/drivers/mailbox
AgeCommit message (Collapse)Author
2017-07-07Merge branch 'mailbox-for-next' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - Minor improvement : avoid requiring unnecessary startup/shutdown callback that many drivers seem to not need - New controller driver for Qualcomm's APCS IPC * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Introduce Qualcomm APCS IPC driver dt-bindings: mailbox: Introduce Qualcomm APCS global binding mailbox: Make startup and shutdown ops optional
2017-06-14mailbox: Introduce Qualcomm APCS IPC driverBjorn Andersson
This implements a driver that exposes the IPC bits found in the APCS Global block in various Qualcomm platforms. The bits are used to signal inter-processor communication signals from the application CPU to other masters. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-06-14mailbox: Make startup and shutdown ops optionalBjorn Andersson
Some mailbox hardware doesn't have to perform any additional operations on startup of shutdown, so make these optional. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-06-12ACPICA: Add support for new PCCT subtablesDavid E. Box
ACPICA commit e7b817e3c405a4fb9ae9ee7ae4992b8c1f20d284 Extended PCC Subspaces (types 3 and 4) Link: https://github.com/acpica/acpica/commit/e7b817e3 Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-27mailbox: handle empty message in tx_tickSudeep Holla
We already check if the message is empty before calling the client tx_done callback. Calling completion on a wait event is also invalid if the message is empty. This patch moves the existing empty message check earlier. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-04-27mailbox: skip complete wait event if timer expiredSudeep Holla
If a wait_for_completion_timeout() call returns due to a timeout, complete() can get called after returning from the wait which is incorrect and can cause subsequent transmissions on a channel to fail. Since the wait_for_completion_timeout() sees the completion variable is non-zero caused by the erroneous/spurious complete() call, and it immediately returns without waiting for the time as expected by the client. This patch fixes the issue by skipping complete() call for the timer expiry. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Reported-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-04-27mailbox: always wait in mbox_send_message for blocking Tx modeSudeep Holla
There exists a race when msg_submit return immediately as there was an active request being processed which may have completed just before it's checked again in mbox_send_message. This will result in return to the caller without waiting in mbox_send_message even when it's blocking Tx. This patch fixes the issue by waiting for the completion always if Tx is in blocking mode. Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox") Reported-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-29mailbox: Remove depends on COMPILE_TEST for BCM_FLEXRM_MBOXAnup Patel
The Broadcom FlexRM mailbox driver uses platform MSI support but not all ARCHs provide asm/msi.h. Due to this, we get compilation error in Broadcom FlexRM mailbox driver via linux/msi.h on ARCHs which lack asm/msi.h. This patch removes "depends on COMPILE_TEST" for Kconfig option BCM_FLEXRM_MBOX so that Broadcom FlexRM mailbox driver is only compiled for ARM64. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-28mailbox: check ->last_tx_done for NULL in case of timer-based pollingAlexey Klimov
It is allowed by code to register mailbox controller that sets txdone_poll flag to request timer-based polling with missed ->last_tx_done() method. If such thing happens and since presence of last_tx_done() is not checked it will fail in hrtimer callback function txdone_hrtimer() when first message will be transmitted. This patch adds check for this method and logging of error on registration of mailbox controller if it requested timer-based polling. Signed-off-by: Alexey Klimov <alexey.klimov@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-28mailbox: Add driver for Broadcom FlexRM ring managerAnup Patel
Some of the Broadcom iProc SoCs have FlexRM ring manager which provides a ring-based programming interface to various offload engines (e.g. RAID, Crypto, etc). This patch adds a common mailbox driver for Broadcom FlexRM ring manager which can be shared by various offload engine drivers (implemented as mailbox clients). Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com> Signed-off-by: Anup Patel <anup.patel@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-28mailbox: bcm-pdc: Add Northstar Plus support to PDC driverSteve Lin
Adds support for Northstar Plus (NS+) products to the PDC mailbox driver. The PDC driver was originally written to support the PDC ring manager in the Northstar2 (64-bit) device. The NS+ (32 bit device) uses an almost identical ring manager, though with a different name. We just need to check for the type of hardware in use, in order to write the appropriate interrupt configuration register. Also updated DMA width to be correct for both NS+ and NS2. Tested on NS+ and NS2. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-28mailbox: constify mbox_chan_ops structuresBhumika Goyal
Check for mbox_chan_ops structures that are only stored in the ops field of a mbox_controller structure. This field is of type const struct mbox_chan_ops *, so mbox_chan_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ struct mbox_chan_ops i@p = {...}; @ok1@ identifier r1.i; struct hi6220_mbox mbox; struct slimpro_mbox ctx; position p; @@ ( mbox.controller.ops=&i@p | ctx.mb_ctrl.ops=&i@p ) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct mbox_chan_ops i; File size details: text data bss dec hex filename 2310 248 0 2558 9fe drivers/mailbox/hi6220-mailbox.o 2366 192 0 2558 9fe drivers/mailbox/hi6220-mailbox.o 1500 248 0 1748 6d4 mailbox/mailbox-xgene-slimpro.o 1556 192 0 1748 6d4 mailbox/mailbox-xgene-slimpro.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-22Merge tag 'acpi-extra-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Here are new versions of two ACPICA changes that were deferred previously due to a problem they had introduced, two cleanups on top of them and the removal of a useless warning message from the ACPI core. Specifics: - Move some Linux-specific functionality to upstream ACPICA and update the in-kernel users of it accordingly (Lv Zheng) - Drop a useless warning (triggered by the lack of an optional object) from the ACPI namespace scanning code (Zhang Rui)" * tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel ACPI: do not warn if _BQC does not exist
2016-12-22Merge branches 'acpica' and 'acpi-scan'Rafael J. Wysocki
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
2016-12-21ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() usersLv Zheng
This patch removes the users of the deprectated APIs: acpi_get_table_with_size() early_acpi_os_unmap_memory() The following APIs should be used instead of: acpi_get_table() acpi_put_table() The deprecated APIs are invented to be a replacement of acpi_get_table() during the early stage so that the early mapped pointer will not be stored in ACPICA core and thus the late stage acpi_get_table() won't return a wrong pointer. The mapping size is returned just because it is required by early_acpi_os_unmap_memory() to unmap the pointer during early stage. But as the mapping size equals to the acpi_table_header.length (see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when such a convenient result is returned, driver code will start to use it instead of accessing acpi_table_header to obtain the length. Thus this patch cleans up the drivers by replacing returned table size with acpi_table_header.length, and should be a no-op. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-20Merge branch 'mailbox-for-next' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - new features (poll and SRAM usage) added to the mailbox-test driver - major update of Broadcom's PDC controller driver - minor fix for auto-loading test and STI driver modules * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mailbox-test: allow reserved areas in SRAM mailbox: mailbox-test: add support for fasync/poll mailbox: bcm-pdc: Remove unnecessary void* casts mailbox: bcm-pdc: Simplify interrupt handler logic mailbox: bcm-pdc: Performance improvements mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors mailbox: bcm-pdc: Convert from threaded IRQ to tasklet mailbox: bcm-pdc: Try to improve branch prediction mailbox: bcm-pdc: streamline rx code mailbox: bcm-pdc: Convert from interrupts to poll for tx done mailbox: bcm-pdc: PDC driver leaves debugfs files after removal mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted mailbox: bcm-pdc: Use octal permissions rather than symbolic mailbox: sti: Fix module autoload for OF registration mailbox: mailbox-test: Fix module autoload
2016-12-19mailbox: mailbox-test: allow reserved areas in SRAMSudeep Holla
When CONFIG_SRAM is enable and the SRAM region is found, the entire SRAM region resource is requested and marked as occupied by SRAM driver even if certain parts of regions is marked reserved. It's quite possible that a small region of the SRAM is reserved for all the mailbox communication and hence it may fail to request the region as it's already marked busy region. This patch tries to just do a ioremap of this mailbox memory region if it finds it busy. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: mailbox-test: add support for fasync/pollSudeep Holla
Currently the read operation on the message debug file returns error if there's no data ready to be read. It expects the userspace to retry if it fails. Since the mailbox response could be asynchronous, it would be good to add support to block the read until the data is available. We can also implement poll file operations so that the userspace can wait to become ready to perform any I/O. This patch implements the poll and fasync file operation callback for the test mailbox device. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Remove unnecessary void* castsRob Rice
Remove unnecessary void* casts in register writes. Fix two other minor formatting issues. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Simplify interrupt handler logicRob Rice
Earlier versions of the PDC driver registered for both transmit and receive interrupts. The hard IRQ handler had to communicate to the soft handler which interrupt(s) had occurred. The PDC driver no longer registers for tx interrupts. So there is no reason to save the intstatus. So remove the intstatus member of the PDC state. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Performance improvementsRob Rice
Three changes to improve performance in the PDC driver: - disable and reenable interrupts while the interrupt handler is running - update rxin and txin descriptor indexes more efficiently - group receive descriptor context into a structure and keep context in a single array rather than five to improve locality of reference Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptorsRob Rice
In PDC driver, it is not necessary to use iowrite32() when writing DMA descriptors to the transmit and receive rings. The ring memory is in host memory. So convert to normal assignment statements. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Convert from threaded IRQ to taskletRob Rice
Previously used threaded IRQs in the PDC driver to defer processing the rx DMA ring after getting an rx done interrupt. Instead, use a tasklet at normal priority for deferred processing. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Try to improve branch predictionRob Rice
Use likely/unlikely directives to improve branch prediction. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: streamline rx codeRob Rice
Remove the unnecessary rmb() from the receive path. If the rx ring has multiple messages ready, avoid reading last_rx_curr multiple times from the register. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Convert from interrupts to poll for tx doneRob Rice
The PDC driver is a mailbox controller. A mailbox controller can report that a mailbox message has been "transmitted" either when a tx interrupt fires or by having the mailbox framework poll. This commit converts the PDC driver to the poll method. We found that the tx interrupt happens when the descriptors are read by the SPU hw. Thus, the interrupt method does not allow more than one tx message in the PDC tx DMA ring at a time. To keep the SPU hw busy, we would like to keep the tx ring full under heavy load. With the poll method, the PDC driver responds that the previous message has been transmitted if the tx ring has space for another message. SPU request messages take a variable number of descriptors. If 15 descriptors are available, there is a good chance another message will fit. Also increased the ring size from 128 to 512 descriptors. With this change, I found the PDC driver hangs on its spinlock under heavy load. The PDC spinlock is not required; so I removed it. Calls to pdc_send_data() are already synchronized because of the channel spinlock in the mailbox framework. Other references to ring indexes should not require locking because they only written on either the tx or rx side. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: PDC driver leaves debugfs files after removalSteve Lin
Minor fix to ensure that debugfs stats pseudo-files are removed when driver module is unloaded. Previously, the call to debugfs_remove_recursive() was never being called since the directory was not empty, and a seg fault would occur if another process tried to access these leftover files. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Changes so mbox client can be removed / re-insertedSteve Lin
Ensure that DMA is disabled, and pointers reset, when changing DMA base addresses in pdc_ring_init(). This allows a mailbox client to be re-inserted after being removed. Otherwise, the DMA doesn't restart so the client hangs while being reinserted. Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: bcm-pdc: Use octal permissions rather than symbolicRob Rice
When creating the debugfs files for the PDC driver, use octal file permissions rather than symbolic file permissions. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: sti: Fix module autoload for OF registrationJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mailbox/mailbox-sti.ko | grep alias alias: platform:mailbox-sti After this patch: $ modinfo drivers/mailbox/mailbox-sti.ko | grep alias alias: platform:mailbox-sti alias: of:N*T*Cst,stih407-mailboxC* alias: of:N*T*Cst,stih407-mailbox Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-19mailbox: mailbox-test: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mailbox/mailbox-test.ko | grep alias $ After this patch: $ modinfo drivers/mailbox/mailbox-test.ko | grep alias alias: of:N*T*Cmailbox-testC* alias: of:N*T*Cmailbox-test Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-12-15Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
2016-11-18mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()Dan Carpenter
We have to use the _safe version of list_for_each() because we're freeing the pointer as we go along. (This might not show up testing depending on what config options you have enabled). Fixes: 0fe88461a0ec ("mailbox: Add Tegra HSP driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18mailbox: Add Tegra HSP driverThierry Reding
This driver exposes a mailbox interface for interprocessor communication using the Hardware Synchronization Primitives (HSP) module's doorbell mechanism. There are multiple HSP instances and they provide additional features such as shared mailboxes, shared and arbitrated semaphores. A driver for a remote processor can use the mailbox client provided by the HSP driver and build an IPC protocol on top of this synchronization mechanism. Based on work by Joseph Lo <josephl@nvidia.com>. Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-14mailbox: PCC: Fix lockdep warning when request PCC channelHoan Tran
This patch fixes the lockdep warning below DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at linux-next/kernel/locking/lockdep.c:2876 lockdep_trace_alloc+0xe0/0xf0 Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-11756-g86c5152 #46 ... Call trace: Exception stack(0xffff8007da837890 to 0xffff8007da8379c0) 7880: ffff8007da834000 0001000000000000 78a0: ffff8007da837a70 ffff0000081111a0 00000000600000c5 000000000000003d 78c0: 9374bc6a7f3c7832 0000000000381878 ffff000009db7ab8 000000000000002f 78e0: ffff00000811aabc ffff000008be2548 ffff8007da837990 ffff00000811adf8 7900: ffff8007da834000 00000000024080c0 00000000000000c0 ffff000009021000 7920: 0000000000000000 0000000000000000 ffff000008c8f7c8 ffff8007da579810 7940: 000000000000002f ffff8007da858000 0000000000000000 0000000000000001 7960: 0000000000000001 0000000000000000 ffff00000811a468 0000000000000002 7980: 656c62617369645f 0000000000038187 00000000000000ee ffff8007da837850 79a0: ffff000009db50c0 ffff000009db569d 0000000000000006 ffff000089db568f [<ffff0000081111a0>] lockdep_trace_alloc+0xe0/0xf0 [<ffff0000081f4950>] __kmalloc_track_caller+0x50/0x250 [<ffff00000857c088>] devres_alloc_node+0x28/0x60 [<ffff0000081220e0>] devm_request_threaded_irq+0x50/0xe0 [<ffff0000087e6220>] pcc_mbox_request_channel+0x110/0x170 [<ffff0000084b2660>] acpi_cppc_processor_probe+0x264/0x414 [<ffff0000084ae9f4>] __acpi_processor_start+0x28/0xa0 [<ffff0000084aeab0>] acpi_processor_start+0x44/0x54 [<ffff00000857897c>] driver_probe_device+0x1fc/0x2b0 [<ffff000008578ae4>] __driver_attach+0xb4/0xc0 [<ffff00000857683c>] bus_for_each_dev+0x5c/0xa0 [<ffff000008578110>] driver_attach+0x20/0x30 [<ffff000008577c20>] bus_add_driver+0x110/0x230 [<ffff000008579320>] driver_register+0x60/0x100 [<ffff000008d478b8>] acpi_processor_driver_init+0x2c/0xb0 [<ffff000008083168>] do_one_initcall+0x38/0x130 [<ffff000008d20d6c>] kernel_init_freeable+0x210/0x2b4 [<ffff000008945d90>] kernel_init+0x10/0x110 [<ffff000008082e80>] ret_from_fork+0x10/0x50 It's because the spinlock inside pcc_mbox_request_channel() is kept too long. This patch releases spinlock before request_irq() and free_irq() to fix this issue as spinlock is only needed to protect the channel data. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-06Merge branch 'mailbox-for-next' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jussi Brar: "New driver and DT bindings for MHU controller integrated on Amlogic Meson platform" * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: Add Amlogic Meson MHU Bindings mailbox: Add Platform Message-Handling-Unit variant driver
2016-10-02Merge branches 'acpi-x86', 'acpi-cppc' and 'acpi-soc'Rafael J. Wysocki
* acpi-x86: x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries() x86: ACPI: remove extraneous white space after semicolon * acpi-cppc: ACPI / CPPC: Support PCC with interrupt flag ACPI / CPPC: Add prefix cppc to cpudata structure name ACPI / CPPC: Add support for functional fixed hardware address ACPI / CPPC: Don't return on CPPC probe failure ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config ACPI / CPPC: check for error bit in PCC status field ACPI / CPPC: move all PCC related information into pcc_data ACPI / CPPC: add sysfs support to compute delivered performance ACPI / CPPC: set a non-zero value for transition_latency ACPI / CPPC: support for batching CPPC requests ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops mailbox: pcc: Support HW-Reduced Communication Subspace type 2 * acpi-soc: ACPI / APD: constify local structures ACPI / APD: Add device HID for Vulcan SPI controller
2016-09-07mailbox: Add Platform Message-Handling-Unit variant driverNeil Armstrong
Add Message-Handling-Unit driver for platform variants as mailbox controller. Actually, only the Amlogic Meson GXBB SoC MHU is supported. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-31mailbox: pcc: Support HW-Reduced Communication Subspace type 2hotran
ACPI 6.1 has a PCC HW-Reduced Communication Subspace type 2 intended for use on HW-Reduce ACPI Platform, which requires read-modify-write sequence to acknowledge doorbell interrupt. This patch provides the implementation for the Communication Subspace Type 2. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-29fix:mailbox:bcm-pdc-mailbox:mark symbols static where possibleBaoyou Xie
We get 2 warnings when biuld kernel with W=1: drivers/mailbox/bcm-pdc-mailbox.c:472:6: warning: no previous prototype for 'pdc_setup_debugfs' [-Wmissing-prototypes] drivers/mailbox/bcm-pdc-mailbox.c:488:6: warning: no previous prototype for 'pdc_free_debugfs' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown()Dan Carpenter
We can't pass NULL pointers to pdc_ring_free() so I moved the check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOXRob Rice
Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX to avoid link error on some platforms. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Rob Rice <rrice@broadcom.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-07-28mailbox: Fix format and type mismatches in Broadcom PDC driverRob Rice
Fix format and type mismatches in a couple debug prints in the Broadcom PDC driver. Use %pad for dma_addr_t and %pa for resource_size_t. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-07-28mailbox: Add Broadcom PDC mailbox driverRob Rice
The Broadcom PDC mailbox driver is a mailbox controller that manages data transfers to and from one or more offload engines. Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-06-24mailbox: pl320: remove __raw IOBen Dooks
The use of __raw IO accesors is not endian safe and should be used sparingly. The relaxed variants should be as lightweight and also are endian safe. Note, this has not been run-time tested. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-06-12mailbox: mailbox-test: set tdev->signal to NULL after freeingSudeep Holla
tdev->signal is not set NULL after it's freed. This will cause random exceptions when the stale pointer is accessed after tdev->signal is freed. Also, since tdev->signal allocation is skipped the next time it's written, this leads to continuous fault finally leading to the total death of the system. Fixes: d1c2f87c9a8f ("mailbox: mailbox-test: Prevent memory leak") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-05-08mailbox: Fix devm_ioremap_resource error detection codeAmitoj Kaur Chawla
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. The Coccinelle semantic patch used to make this change is as follows: @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-04-26mailbox/omap: kill omap_mbox_{save/restore}_ctx() functionsSuman Anna
The omap_mbox_save_ctx() and omap_mbox_restore_ctx() API were previously provided to OMAP mailbox clients to save and restore the mailbox context during system suspend/resume. The save and restore functionality is now implemented through System PM driver callbacks, and there is no need for these functions, so kill these API. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 13:36:27 +0000