| Age | Commit message (Collapse) | Author |
|---|
|
Create one debug entry directory per instance to support the multi
instantiation.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
We get a warning about this being unused when CONFIG_PM is disabled:
drivers/mailbox/tegra-hsp.c:782:12: error: 'tegra_hsp_resume' defined but not used [-Werror=unused-function]
Fixes: 9a63f0f40599 ("mailbox: tegra-hsp: Add suspend/resume support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
RING_CONTROL reg was not written due to wrong address, hence all
the subsequent ring flush was timing out.
Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The mbox_flush() function can be used by drivers that are built as
modules, so the function needs to be exported.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
In order to get rid of a lot of cleanup boilerplate code, use the
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Use devm_kstrdup_const() in the tegra-hsp driver. This mostly serves as
an example of how to use this new routine to shrink driver code.
Also use devm_kzalloc() instead of regular kzalloc() to shrink the
driver even more.
Doorbell objects are only removed in the driver's remove callback so
it's safe to convert all memory allocations to devres.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Upon resuming from a system sleep state, the interrupts for all active
shared mailboxes need to be reenabled, otherwise they will not work.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The Tegra HSP block supports 'shared mailboxes' that are simple 32-bit
registers consisting of a FULL bit in MSB position and 31 bits of data.
The hardware can be configured to trigger interrupts when a mailbox
is empty or full. Add support for these shared mailboxes to the HSP
driver.
The initial use for the mailboxes is the Tegra Combined UART. For this
purpose, we use interrupts to receive data, and spinning to wait for
the transmit mailbox to be emptied to minimize unnecessary overhead.
Based on work by Mikko Perttunen <mperttunen@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Look through the whole controller list when mapping device tree
phandles to controllers instead of stopping at the first one.
Each controller is intended to only contain one kind of mailbox,
but some devices (like Tegra HSP) implement multiple kinds and use
the same device tree node for all of them. As such, we need to allow
multiple mbox_controllers per device tree node.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The mailbox framework supports blocking transfers via completions for
clients that can sleep. In order to support blocking transfers in cases
where the transmission is not permitted to sleep, add a new ->flush()
callback that controller drivers can implement to busy loop until the
transmission has been completed. A new mbox_flush() function can be
called by mailbox consumers in atomic context to make sure a transfer
has completed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Memory allocated through device-managed functions doesn't need to be
explicitly freed, so these calls can be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add device-managed equivalents of the mbox_controller_register() and
mbox_controller_unregister() functions that can be used to have the
devres infrastructure automatically unregister mailbox controllers on
driver probe failure or driver removal. This can help remove a lot of
boiler plate code from drivers.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Adopt the SPDX license identifier headers to ease license compliance
management.
Cc: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The > comparison should be >= or we access one element beyond the end
of the array.
(The inst->qinsts[] array is allocated in the ti_msgmgr_probe() function
and it has ->num_valid_queues elements.)
Fixes: a2b79838b891 ("mailbox: ti-msgmgr: Add support for Secure Proxy")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Current mailbox driver of Hi3660 release the mailbox directly
before sending a new message which may cause last message lost
and next message sending doesn't take effect actually.
This patch fixs this issue by following the right progress below,
each time before sending a message, mailbox driver will check
whether the mailbox is in ready state, if last message has been
acknowledged, the mailbox driver will clear the ack state to turn
the mailbox to ready state again.
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The mbox_chan_ops structure can be const as it is only stored in the
ops field of an mbox_controller structure and this field is const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- convert print users to use the %pOFn format specifier
- enable ti-msgmr driver for the K3 platform as well
- add QCS404 to compatible list of QCOM's APCS IPC driver
- minor spelling fixes toogle -> toggle
- kzalloc failure catch in Mediatek driver
* tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: mediatek: Add check for possible failure of kzalloc
mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle"
mailbox: qcom: Add QCS404 APPS Global compatible
drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3
mailbox: Convert to using %pOFn instead of device_node.name
|
|
The patch 623a6143a845("mailbox: mediatek: Add Mediatek CMDQ driver")
introduce the following static checker warning:
drivers/mailbox/mtk-cmdq-mailbox.c:366 cmdq_mbox_send_data()
error: potential null dereference 'task'. (kzalloc returns null)
Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Trivial fix to spelling mistake in function name flexrm_flip_header_toogle,
rename it to flexrm_flip_header_toggle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add support for the QCS404 APPS Global block with IPC register at offset
8.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
ti-msgmr driver can support K3 platforms as well.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
acpi_pcc_probe() calls acpi_table_parse_entries_array() but fails
to check for an error return. This in turn can result in calling
kcalloc() with a negative count as well as emitting the following
misleading erorr message:
[ 2.642015] Could not allocate space for PCC mbox channels
Fixes: 8f8027c5f935 (mailbox: PCC: erroneous error message when parsing ACPI PCCT)
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: Al Stone <ahs3@redhat.com>
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The i.MX Messaging Unit is a two side block which allows applications
implement communication over this sides.
The MU includes the following features:
- Messaging control by interrupts or by polling
- Four general-purpose interrupt requests reflected to the other side
- Three general-purpose flags reflected to the other side
- Four receive registers with maskable interrupt
- Four transmit registers with maskable interrupt
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c:
WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o
Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <linux-mediatek@lists.infradead.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This patch is first version of Mediatek Command Queue(CMDQ) driver. The
CMDQ is used to help write registers with critical time limitation,
such as updating display configuration during the vblank. It controls
Global Command Engine (GCE) hardware to achieve this requirement.
Currently, CMDQ only supports display related hardwares, but we expect
it can be extended to other hardwares for future requirements.
Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Secure Proxy is another communication scheme in Texas Instrument's
devices intended to provide an unique communication path from various
processors in the System on Chip(SoC) to a central System Controller.
Secure proxy is, in effect, an evolution of current generation Message
Manager hardware block found in K2G devices. However the following
changes have taken place:
Secure Proxy instance exposes "threads" or "proxies" which is
primary representation of "a" communication channel. Each thread is
preconfigured by System controller configuration based on SoC usage
requirements. Secure proxy by itself represents a single "queue" of
communication but allows the proxies to be independently operated.
Each Secure proxy thread can uniquely have their own error and threshold
interrupts allowing for more fine control of IRQ handling.
Provide the driver support for Secure Proxy and thread instances.
NOTE: Secure proxy configuration is only done by System Controller,
hence these are assumed to be pre-configured instances.
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
For newer generation of the hardware, the naming of the region is
decided at integration level and there could be additional regions
as well. Hence move the region naming to be described from compatible
descriptor.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Change mask used to extract the message count to be descriptor based.
This is to support changes for count location for various SoC
solutions.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
In a much bigger system SoCs, the number of Rx channels can be
many and mostly unused based on the system of choice, and not all
Rx channels need IRQs and allocating all memory at probe will be
inefficient. Some SoCs could have total threads in the 100s and usage
would be just 1 Rx thread.
Thus, request and map the IRQs and allocate memory only when needed.
Since these channels are requested by client drivers on need, our
utilization will be optimal.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Though q_proxies and q_slices do describe the hardware configuration,
they are not necessary for operation given that the values are
always default. Hence drop the same.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The OMAP Mailbox driver is directly using an integer value as
match data for distinguishing the interrupt register layout
between OMAP2 and OMAP4+ SoCs. Introduce a dedicated structure
for storing this match data, and simplify the probe function by
using the of_device_get_match_data() function. This allows the
driver to scale for 64-bit platforms by eliminating the unnecessary
type-casting between a u32 and a void pointer types.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Use the appropriate SPDX license identifier in the OMAP Mailbox
driver source files and drop the previous boilerplate license text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
