summaryrefslogtreecommitdiff
path: root/drivers/mailbox
AgeCommit message (Collapse)Author
2018-10-29Merge tag 'mailbox-v4.20' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - convert print users to use the %pOFn format specifier - enable ti-msgmr driver for the K3 platform as well - add QCS404 to compatible list of QCOM's APCS IPC driver - minor spelling fixes toogle -> toggle - kzalloc failure catch in Mediatek driver * tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: Add check for possible failure of kzalloc mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle" mailbox: qcom: Add QCS404 APPS Global compatible drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3 mailbox: Convert to using %pOFn instead of device_node.name
2018-09-29mailbox: mediatek: Add check for possible failure of kzallocHoulong Wei
The patch 623a6143a845("mailbox: mediatek: Add Mediatek CMDQ driver") introduce the following static checker warning: drivers/mailbox/mtk-cmdq-mailbox.c:366 cmdq_mbox_send_data() error: potential null dereference 'task'. (kzalloc returns null) Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle"Colin Ian King
Trivial fix to spelling mistake in function name flexrm_flip_header_toogle, rename it to flexrm_flip_header_toggle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: qcom: Add QCS404 APPS Global compatibleBjorn Andersson
Add support for the QCS404 APPS Global block with IPC register at offset 8. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3Nishanth Menon
ti-msgmr driver can support K3 platforms as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-10mailbox: PCC: handle parse errorDavid Arcari
acpi_pcc_probe() calls acpi_table_parse_entries_array() but fails to check for an error return. This in turn can result in calling kcalloc() with a negative count as well as emitting the following misleading erorr message: [ 2.642015] Could not allocate space for PCC mbox channels Fixes: 8f8027c5f935 (mailbox: PCC: erroneous error message when parsing ACPI PCCT) Signed-off-by: David Arcari <darcari@redhat.com> Reviewed-by: Al Stone <ahs3@redhat.com> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15mailbox: Add support for i.MX messaging unitOleksij Rempel
The i.MX Messaging Unit is a two side block which allows applications implement communication over this sides. The MU includes the following features: - Messaging control by interrupts or by polling - Four general-purpose interrupt requests reflected to the other side - Three general-purpose flags reflected to the other side - Four receive registers with maskable interrupt - Four transmit registers with maskable interrupt Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.cRandy Dunlap
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c: WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: mediatek: Add Mediatek CMDQ driverHoulong Wei
This patch is first version of Mediatek Command Queue(CMDQ) driver. The CMDQ is used to help write registers with critical time limitation, such as updating display configuration during the vblank. It controls Global Command Engine (GCE) hardware to achieve this requirement. Currently, CMDQ only supports display related hardwares, but we expect it can be extended to other hardwares for future requirements. Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: HS Liao <hs.liao@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Add support for Secure ProxyNishanth Menon
Secure Proxy is another communication scheme in Texas Instrument's devices intended to provide an unique communication path from various processors in the System on Chip(SoC) to a central System Controller. Secure proxy is, in effect, an evolution of current generation Message Manager hardware block found in K2G devices. However the following changes have taken place: Secure Proxy instance exposes "threads" or "proxies" which is primary representation of "a" communication channel. Each thread is preconfigured by System controller configuration based on SoC usage requirements. Secure proxy by itself represents a single "queue" of communication but allows the proxies to be independently operated. Each Secure proxy thread can uniquely have their own error and threshold interrupts allowing for more fine control of IRQ handling. Provide the driver support for Secure Proxy and thread instances. NOTE: Secure proxy configuration is only done by System Controller, hence these are assumed to be pre-configured instances. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Move the memory region name to descriptorNishanth Menon
For newer generation of the hardware, the naming of the region is decided at integration level and there could be additional regions as well. Hence move the region naming to be described from compatible descriptor. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Change message count mask to be descriptor basedNishanth Menon
Change mask used to extract the message count to be descriptor based. This is to support changes for count location for various SoC solutions. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Allocate Rx channel resources only on requestNishanth Menon
In a much bigger system SoCs, the number of Rx channels can be many and mostly unused based on the system of choice, and not all Rx channels need IRQs and allocating all memory at probe will be inefficient. Some SoCs could have total threads in the 100s and usage would be just 1 Rx thread. Thus, request and map the IRQs and allocate memory only when needed. Since these channels are requested by client drivers on need, our utilization will be optimal. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Get rid of unused structure membersNishanth Menon
Though q_proxies and q_slices do describe the hardware configuration, they are not necessary for operation given that the values are always default. Hence drop the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox/omap: use of_device_get_match_data() to get match dataSuman Anna
The OMAP Mailbox driver is directly using an integer value as match data for distinguishing the interrupt register layout between OMAP2 and OMAP4+ SoCs. Introduce a dedicated structure for storing this match data, and simplify the probe function by using the of_device_get_match_data() function. This allows the driver to scale for 64-bit platforms by eliminating the unnecessary type-casting between a u32 and a void pointer types. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox/omap: switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in the OMAP Mailbox driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: xgene-slimpro: Fix potential NULL pointer dereferenceGustavo A. R. Silva
There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: f700e84f417b ("mailbox: Add support for APM X-Gene platform mailbox driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'mailbox-v4.18' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - Remove HAS_DMA config dependencies - New STMicroelectronics STM32 IPCC driver - Enable QCom driver to run more controllers - Fixed return code from null to ptr-err for Brcm driver - Fix kconfig dependencies for the HiSilicon driver * tag 'mailbox-v4.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/drivers/hisi: Consolidate the Kconfig for the MAILBOX mailbox: Add support for Qualcomm SDM845 SoCs dt-bindings: mailbox: Add APSS shared binding for SDM845 SoCs mailbox: bcm2835: Fix of_xlate return value mailbox: qcom: Add msm8998 hmss compatible mailbox: add STMicroelectronics STM32 IPCC driver dt-bindings: mailbox: add STMicroelectronics STM32 IPCC binding mailbox: Remove depends on HAS_DMA in case of platform dependency
2018-06-06mailbox/drivers/hisi: Consolidate the Kconfig for the MAILBOXDaniel Lezcano
The current defconfig is inconsistent as it selects the mailbox and the clock for the hi6220 and the hi3660 without having their Kconfigs making sure the dependencies are correct. It ends up when selecting different versions for the kernel (for example when git bisecting) those options disappear and they don't get back, leading to unexpected behaviors. In our case, the cpufreq driver does no longer work because the clock fails to initialize due to the clock stub and the mailbox missing. In order to have the dependencies correctly set when defaulting, let's do the same as commit 3a49afb84ca074e ("clk: enable hi655x common clk automatically") where we select automatically the driver when the parent driver is selected. With sensible defaults in place, we can leave other choices for EXPERT. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-06mailbox: Add support for Qualcomm SDM845 SoCsSibi Sankar
Add the corresponding APSS shared offset for SDM845 SoC Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-06mailbox: bcm2835: Fix of_xlate return valueStefan Wahren
The bcm2835-mailbox returns NULL instead of an error pointer, which could result in a NULL ptr dereference in mbox_request_channel. So fix this by returning a proper error pointer. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-06mailbox: qcom: Add msm8998 hmss compatibleBjorn Andersson
The Qualcomm MSM8998 platform has a APCS HMSS GLOBAL block, add the compatible for this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-06mailbox: add STMicroelectronics STM32 IPCC driverFabien Dessenne
The STMicroelectronics STM32 Inter-Processor Communication Controller (IPCC) is used for communicating data between two processors. It provides a non blocking signaling mechanism to post and retrieve communication data in an atomic way. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-06mailbox: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-05-18mailbox: PCC: erroneous error message when parsing ACPI PCCTAl Stone
There have been multiple reports of the following error message: [ 0.068293] Error parsing PCC subspaces from PCCT This error message is not correct. In multiple cases examined, the PCCT (Platform Communications Channel Table) concerned is actually properly constructed; the problem is that acpi_pcc_probe() which reads the PCCT is making the assumption that the only valid PCCT is one that contains subtables of one of two types: ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE or ACPI_PCCT_TYPE_HW_REDUCED_TYPE2. The number of subtables of these types are counted and as long as there is at least one of the desired types, the acpi_pcc_probe() succeeds. When no subtables of these types are found, regardless of whether or not any other subtable types are present, the error mentioned above is reported. In the cases reported to me personally, the PCCT contains exactly one subtable of type ACPI_PCCT_TYPE_GENERIC_SUBSPACE. The function acpi_pcc_probe() does not count it as a valid subtable, so believes there to be no valid subtables, and hence outputs the error message. An example of the PCCT being reported as erroneous yet perfectly fine is the following: Signature : "PCCT" Table Length : 0000006E Revision : 05 Checksum : A9 Oem ID : "XXXXXX" Oem Table ID : "XXXXX " Oem Revision : 00002280 Asl Compiler ID : "XXXX" Asl Compiler Revision : 00000002 Flags (decoded below) : 00000001 Platform : 1 Reserved : 0000000000000000 Subtable Type : 00 [Generic Communications Subspace] Length : 3E Reserved : 000000000000 Base Address : 00000000DCE43018 Address Length : 0000000000001000 Doorbell Register : [Generic Address Structure] Space ID : 01 [SystemIO] Bit Width : 08 Bit Offset : 00 Encoded Access Width : 01 [Byte Access:8] Address : 0000000000001842 Preserve Mask : 00000000000000FD Write Mask : 0000000000000002 Command Latency : 00001388 Maximum Access Rate : 00000000 Minimum Turnaround Time : 0000 To fix this, we count up all of the possible subtable types for the PCCT, and only report an error when there are none (which could mean either no subtables, or no valid subtables), or there are too many. We also change the logic so that if there is a valid subtable, we do try to initialize it per the PCCT subtable contents. This is a change in functionality; previously, the probe would have returned right after the error message and would not have tried to use any other subtable definition. Tested on my personal laptop which showed the error previously; the error message no longer appears and the laptop appears to operate normally. Signed-off-by: Al Stone <ahs3@redhat.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20mailbox: Add support for Hi3660 mailboxKaihua Zhong
Hi3660 mailbox controller is used to send message within multiple processors, MCU, HIFI, etc. It supports 32 mailbox channels and every channel can only be used for single transferring direction. Once the channel is enabled, it needs to specify the destination interrupt and acknowledge interrupt, these two interrupt vectors are used to create the connection between the mailbox and interrupt controllers. The data transferring supports two modes, one is named as "automatic acknowledge" mode so after send message the kernel doesn't need to wait for acknowledge from remote and directly return; there have another mode is to rely on handling interrupt for acknowledge. This commit is for initial version driver, which only supports "automatic acknowledge" mode to support CPU clock, which is the only one consumer to use mailbox and has been verified. Later may enhance this driver for interrupt mode (e.g. for supporting HIFI). Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ruyi Wang <wangruyi@huawei.com> Signed-off-by: Kaihua Zhong <zhongkaihua@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-03-15mailbox: tegra: relax TEGRA_HSP_MBOX Kconfig dependenciesArnd Bergmann
With the addition of the ARCH_TEGRA_194_SOC driver, we get a new Kconfig warning: warning: (ARCH_TEGRA_186_SOC && ARCH_TEGRA_194_SOC) selects TEGRA_HSP_MBOX which has unmet direct dependencies (MAILBOX && ARCH_TEGRA_186_SOC) It looks like the dependency is a bit too strict here, allowing the driver to be built for any Tegra chip avoids the problem. Fixes: 6f9ed07fde03 ("soc/tegra: Add Tegra194 SoC configuration option") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-03-15maillbox: bcm-flexrm-mailbox: Use dma_pool_zalloc()Souptick Joarder
Use dma_pool_zalloc() instead of dma_pool_alloc + memset Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-04Merge tag 'mailbox-v4.16' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "Misc driver changes only: - TI-MsgMgr: Fix print format for a printk - TI-MSgMgr: SPDX license switch for the driver - QCOM-IPC: Convert driver to use regmap - QCOM-IPC: Spawn sibling clock device from mailbox driver" * tag 'mailbox-v4.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: Document the APCS clock binding mailbox: qcom: Create APCS child device for clock controller mailbox: qcom: Convert APCS IPC driver to use regmap mailbox: ti-msgmgr: Use %zu for size_t print format mailbox: ti-msgmgr: Switch to SPDX Licensing
2018-02-04mailbox: qcom: Create APCS child device for clock controllerGeorgi Djakov
There is a clock controller functionality provided by the APCS hardware block of msm8916 devices. The device-tree would represent an APCS node with both mailbox and clock provider properties. Create a platform child device for the clock controller functionality so the driver can probe and use APCS as parent. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-02-04mailbox: qcom: Convert APCS IPC driver to use regmapGeorgi Djakov
This hardware block provides more functionalities that just IPC. Convert it to regmap to allow other child platform devices to use the same regmap. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-01-10mailbox: ti-msgmgr: Use %zu for size_t print formatNishanth Menon
message->len is of type size_t and %d is incorrect format usage. Instead use %zu for handling size_t correctly. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-01-10mailbox: ti-msgmgr: Switch to SPDX LicensingNishanth Menon
Switch to SPDX licensing and drop the GPL text which comes redundant. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-15Merge tag 'mailbox-v4.15' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "Change to POLL api and fixes for FlexRM and OMAP driver. Summary: - Core: Prefer ACK method over POLL, if both supported - Test: use flag instead of special character - FlexRM: Usual driver internal minor churn - Omap: fix error path" * tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/omap: unregister mbox class mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs mailbox: bcm-flexrm-mailbox: Use common GPL comment header mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence
2017-11-14mailbox/omap: unregister mbox classArvind Yadav
platform_driver_register() can fail here and we must unregister mbox class. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-11-14mailbox: mailbox-test: don't rely on rx_buffer content to signal data readySudeep Holla
Currently we rely on the first byte of the Rx buffer to check if there's any data available to be read. If the first byte of the received buffer is zero (i.e. null character), then we fail to signal that data is available even when it's available. Instead introduce a boolean variable to track the data availability and update it in the channel receive callback as ready and clear it when the data is read. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-11-14mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdoneSudeep Holla
Currently the mailbox framework sets txdone_method to TXDONE_BY_POLL if the controller sets txdone_by_poll. However some clients can have a mechanism to do TXDONE_BY_ACK which they can specify by knows_txdone. However, we endup setting both TXDONE_BY_POLL and TXDONE_BY_ACK in that case. In such scenario, we may end up with below warnings as the tx ticker is run both by mailbox framework and the client. WARNING: CPU: 1 PID: 0 at kernel/time/hrtimer.c:805 hrtimer_forward+0x88/0xd8 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc5 #242 Hardware name: ARM LTD ARM Juno Development Platform task: ffff8009768ca700 task.stack: ffff8009768f8000 PC is at hrtimer_forward+0x88/0xd8 LR is at txdone_hrtimer+0xd4/0xf8 Call trace: hrtimer_forward+0x88/0xd8 __hrtimer_run_queues+0xe4/0x158 hrtimer_interrupt+0xa4/0x220 arch_timer_handler_phys+0x30/0x40 handle_percpu_devid_irq+0x78/0x130 generic_handle_irq+0x24/0x38 __handle_domain_irq+0x5c/0xb8 gic_handle_irq+0x54/0xa8 This patch fixes the issue by resetting TXDONE_BY_POLL if client has set knows_txdone. Cc: Alexey Klimov <alexey.klimov@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-11-13Merge tag 'acpi-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update ACPICA to upstream revision 20170831, fix APEI to use the fixmap instead of ioremap_page_range(), add an operation region driver for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI CPPC driver, fix a few assorted issues and clean up some code. Specifics: - Update the ACPICA code to upstream revision 20170831 including * PDTT table header support (Bob Moore). * Cleanup and extension of internal string-to-integer conversion functions (Bob Moore). * Support for 64-bit hardware accesses (Lv Zheng). * ACPI PM Timer code adjustment to deal with 64-bit return values of acpi_hw_read() (Bob Moore). * Support for deferred table verification in acpiexec (Lv Zheng). - Fix APEI to use the fixmap instead of ioremap_page_range() which cannot work correctly the way the code in there attempted to use it and drop some code that's not necessary any more after that change (James Morse). - Clean up the APEI support code and make it use 64-bit timestamps (Arnd Bergmann, Dongjiu Geng, Jan Beulich). - Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani). - Add support for PCC subspace IDs to the ACPI CPPC driver (George Cherian). - Fix an ACPI EC driver regression related to the handling of EC events during the "noirq" phases of system suspend/resume (Lv Zheng). - Delay the initialization of the lid state in the ACPI button driver to fix issues appearing on some systems (Hans de Goede). - Extend the KIOX000A "device always present" quirk to cover all affected BIOS versions (Hans de Goede). - Clean up some code in the ACPI core and drivers (Colin Ian King, Gustavo Silva)" * tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) ACPI: Mark expected switch fall-throughs ACPI / LPSS: Remove redundant initialization of clk ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file ACPI / sysfs: Make function param_set_trace_method_name() static ACPI / button: Delay acpi_lid_initialize_state() until first user space open ACPI / EC: Fix regression related to triggering source of EC event handling APEI / ERST: use 64-bit timestamps ACPI / APEI: Remove arch_apei_flush_tlb_one() arm64: mm: Remove arch_apei_flush_tlb_one() ACPI / APEI: Remove ghes_ioremap_area ACPI / APEI: Replace ioremap_page_range() with fixmap ACPI / APEI: remove the unused dead-code for SEA/NMI notification type ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() ACPICA: Update version to 20170831 ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read ACPICA: String conversions: Update to add new behaviors ACPICA: String conversions: Cleanup/format comments. No functional changes ACPICA: Restructure/cleanup all string-to-integer conversion functions ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-09mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header fileGeorge Cherian
Move the MAX_PCC_SUBSPACES definition to acpi/pcc.h file in preparation to add subspace ID support for cppc_acpi driver. Signed-off-by: George Cherian <george.cherian@cavium.com> Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-06mailbox: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Ley Foon Tan <lftan@altera.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCsAnup Patel
By default, we build Broadcom FlexRM driver as loadable module for iProc SOCs so that kernel image is little smaller and we load FlexRM driver only when required. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-10-27mailbox: bcm-flexrm-mailbox: Use common GPL comment headerAnup Patel
This patch makes the comment header of Broadcom FlexRM driver similar to the GPL comment header used across Broadcom driver sources. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-10-27mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROCScott Branden
The Broadcom FlexRM Mailbox is only present in the Broadcom IPROC SoCs. Add depends on ARCH_BCM_IPROC to BCM_FLEXRX_MBOX. Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 21:25:20 +0000