| Age | Commit message (Collapse) | Author |
|---|
|
The mailbox core uses jiffy based timer to handle polling for the
transmit completion. If the client/protocol have/support notification
of the last packet transmit completion via ACK packet, then we tick the
Tx state machine immediately in the callback. However if the client
doesn't support that mechanism we might end-up waiting for atleast a
jiffy even though the remote is ready to receive the next request.
This patch switches the timer used for that polling from jiffy-based
to hrtimer-based so that we can support polling at much higher time
resolution.
Reported-and-suggested-by: Juri Lelli <Juri.Lelli@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This patch fix spelling typo inv various part of sources.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull module_init replacement part two from Paul Gortmaker:
"Replace module_init with appropriate alternate initcall in non
modules.
This series converts non-modular code that is using the module_init()
call to hook itself into the system to instead use one of our
alternate priority initcalls.
Unlike the previous series that used device_initcall and hence was a
runtime no-op, these commits change to one of the alternate initcalls,
because (a) we have them and (b) it seems like the right thing to do.
For example, it would seem logical to use arch_initcall for arch
specific setup code and fs_initcall for filesystem setup code.
This does mean however, that changes in the init ordering will be
taking place, and so there is a small risk that some kind of implicit
init ordering issue may lie uncovered. But I think it is still better
to give these ones sensible priorities than to just assign them all to
device_initcall in order to exactly preserve the old ordering.
Thad said, we have already made similar changes in core kernel code in
commit c96d6660dc65 ("kernel: audit/fix non-modular users of
module_init in core code") without any regressions reported, so this
type of change isn't without precedent. It has also got the same
local testing and linux-next coverage as all the other pull requests
that I'm sending for this merge window have got.
Once again, there is an unused module_exit function removal that shows
up as an outlier upon casual inspection of the diffstat"
* tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
x86: perf_event_intel_pt.c: use arch_initcall to hook in enabling
x86: perf_event_intel_bts.c: use arch_initcall to hook in enabling
mm/page_owner.c: use late_initcall to hook in enabling
lib/list_sort: use late_initcall to hook in self tests
arm: use subsys_initcall in non-modular pl320 IPC code
powerpc: don't use module_init for non-modular core hugetlb code
powerpc: use subsys_initcall for Freescale Local Bus
x86: don't use module_init for non-modular core bootflag code
netfilter: don't use module_init/exit in core IPV4 code
fs/notify: don't use module_init for non-modular inotify_user code
mm: replace module_init usages with subsys_initcall in nommu.c
|
|
The drivers/mailbox/pl320-ipc.o is dependent on config PL320_MBOX
which is declared as a bool. Hence the code is never going to be
modular. So using module_init as an alias for __initcall can be
somewhat misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing. Also add an inclusion of init.h, as
that was previously implicit.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of subsys_initcall (which
seems to make sense for IPC code) will thus change this
registration from level 6-device to level 4-subsys (i.e. slightly
earlier). However no impact of that small difference is expected.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
With the VC reader blocked and the ARM writing, MAIL0_STA reads empty
permanently while MAIL1_STA goes from empty (0x40000000) to non-empty
(0x00000001-0x00000007) to full (0x80000008).
This bug ended up having no effect on us, because all of our
transactions in the client driver were synchronous and under a mutex.
Suggested-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This patch supplies a new framework API; mbox_request_channel_byname().
It works by supplying the usual client pointer as the first argument and
a string as the second. The API will search the client's node for a
'mbox-names' property then request a channel in the normal way using the
requested string's index as the expected second 'index' argument.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
This mailbox driver provides a single mailbox channel to write 32-bit
values to the VPU and get a 32-bit response. The Raspberry Pi
firmware uses this mailbox channel to implement firmware calls, while
Roku 2 (despite being derived from the same firmware tree) doesn't.
The driver was originally submitted by Lubomir, based on the
out-of-tree 2708 mailbox driver. Eric Anholt fixed it up for
upstreaming, with the major functional change being that it now has no
notion of multiple channels (since that is a firmware-dependent
concept) and instead the raspberrypi-firmware driver will do that
bit-twiddling in its own messages.
[Jassi: made the 'mbox_chan_ops' struct as const and removed a redundant
variable]
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Craig McGeachie <slapdau@yahoo.com.au>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
mbox_request_channel() currently returns EBUSY in the event the controller
is not present or if of_xlate() fails, but in neither case is EBUSY really
appropriate. Return EPROBE_DEFER if the controller is not yet present
and change of_xlate() to return an ERR_PTR instead of NULL so that the
error can be propagated back to the caller of mbox_request_channel().
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The mailbox controller's channel ops ought to be read-only. Update
all the mailbox drivers to make their mbox_chan_ops const as well.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Cc: Ley Foon Tan <lftan@altera.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Not all architectures have io memory.
Fixes:
drivers/built-in.o: In function `altera_mbox_probe':
mailbox-altera.c:(.text+0x409fd2): undefined reference to `devm_ioremap_resource'
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add driver for the ARM Primecell Message-Handling-Unit(MHU) controller.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Vincent Yang <vincent.yang@socionext.com>
Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya@socionext.com>
|
|
Previously the PCC driver depended on the client
side to map the communication space base address. This region
was was then used in the PCC driver and the client side.
The client side used this region to read and write its data
and the PCC driver used it to only write the PCC command.
Removing this split simplifies the PCC driver a lot. This patch
moves all communication region read/writes to the client side.
The PCC clients can now drive the PCC mailbox controller via the
mbox_client_txdone() method.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox framework updates from Jassi Brar.
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Add Altera mailbox driver
mailbox: check for bit set before polling
Mailbox: Fix return value check in pcc_init()
|
|
The Altera mailbox allows for interprocessor communication. It supports
only one channel and work as either sender or receiver.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
|
|
Before polling we just need to see if the TXDONE_BY_POLL bit
is set in txdone_method. There may be another bit (method)
specified as well, like TXDONE_BY_ACK.
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
In case of error, the function platform_create_bundle() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
|
|
pcc_init() uses pr_err() to print two messages that are really debug
and not interesting to users. Replace those pr_err() with pr_debug().
Reported-by: Cristian <caravena@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
|
|
ACPI 5.0+ spec defines a generic mode of communication
between the OS and a platform such as the BMC. This medium
(PCC) is typically used by CPPC (ACPI CPU Performance management),
RAS (ACPI reliability protocol) and MPST (ACPI Memory power
states).
This patch adds PCC support as a Mailbox Controller. As of
ACPI v5.1 there is no provision for clients to lookup mailbox
controllers in a way that Linux expects. e.g. in DT the clients
can list the mailboxes they can associate with in the DT binding
and then provide a unique index to lookup a channel within a mailbox.
Since the ACPI spec doesn't have anything similar, we introduce a
mailbox controller specific API so that when the client calls it,
we know to lookup in the context of a specific controller. This
also helps in keeping a consistent interface across DT and ACPI
for such drivers.
This patch implements basic PCC support using the ACPI v5.1
structures. IRQ mode support will be provided as follow up patches.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The OMAP mailbox driver and its existing clients (remoteproc
for OMAP4+) are adapted to use the generic mailbox framework.
The main changes for the adaptation are:
- The tasklet used for Tx is replaced with the state machine from
the generic mailbox framework. The workqueue used for processing
the received messages stays intact for minimizing the effects on
the OMAP mailbox clients.
- The existing exported client API, omap_mbox_get, omap_mbox_put and
omap_mbox_send_msg are deleted, as the framework provides equivalent
functionality. A OMAP-specific omap_mbox_request_channel is added
though to support non-DT way of requesting mailboxes.
- The OMAP mailbox driver is integrated with the mailbox framework
through the proper implementations of mbox_chan_ops, except for
.last_tx_done and .peek_data. The OMAP mailbox driver does not need
these ops, as it is completely interrupt driven.
- The OMAP mailbox driver uses a custom of_xlate controller ops that
allows phandles for the pargs specifier instead of indexing to avoid
any channel registration order dependencies.
- The new framework does not support multiple clients operating on a
single channel, so the reference counting logic is simplified.
- The remoteproc driver (current client) is adapted to use the new API.
The notifier callbacks used within this client is replaced with the
regular callbacks from the newer framework.
- The exported OMAP mailbox API are limited to omap_mbox_save_ctx,
omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq,
with the signature modified to take in the new mbox_chan handle instead
of the OMAP specific omap_mbox handle. The first 2 will be removed when
the OMAP mailbox driver is adapted to runtime_pm. The other exported
API omap_mbox_request_channel will be removed once existing legacy
users are converted to DT.
Signed-off-by: Suman Anna <s-anna@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
If the mailbox controller expects the payload is in place before
initiating the transmit, then it's impossible to reuse the list
maintained by core mailbox code currently. Maintaining another list
for sending the message in the controller seems totally unnecessary
as core mailbox library already provides that feature.
This patch introduces tx_prepare callback in mbox_client which
can be used by the core mailbox library before initiating the
transaction through mbox->ops->send_data. The client driver can
implement this callback to ensure the payload is copied to the
shared memory.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
poll_txdone() will unconditionally re-arm the polling timer if there was
an active request, even if the active request completed and no other
requests were submitted. This is fixed by:
- only re-arming the timer if the controller reported that the current
transmission has not completed, and,
- moving the call to poll_txdone() into msg_submit() so that the
controller gets polled (and the timer re-armed, if necessary) whenever
a new message is submitted.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox framework from Jassi Brar:
"A framework for Mailbox controllers and clients have been cooking for
more than a year now.
Everybody in the CC list had been copied on patchset revisions and
most of them have made sounds of approval, though just one concrete
Reviewed-by. The patchset has also been in linux-next for a couple of
weeks now and no conflict has been reported. The framework has the
backing of at least 5 platforms, though I can't say if/when they
upstream their drivers (some businesses have 'changed')"
(Further acked-by by Arnd Bergmann and Suman Anna in the pull request
thread)
* 'mailbox-for-linus' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt: mailbox: add generic bindings
doc: add documentation for mailbox framework
mailbox: Introduce framework for mailbox
mailbox: rename pl320-ipc specific mailbox.h
|
|
A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Introduce common framework for client/protocol drivers and
controller drivers of Inter-Processor-Communication (IPC).
Client driver developers should have a look at
include/linux/mailbox_client.h to understand the part of
the API exposed to client drivers.
Similarly controller driver developers should have a look
at include/linux/mailbox_controller.h
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The patch 30058677 "ARM / highbank: add support for pl320 IPC"
added a pl320 IPC specific header file as a generic mailbox.h.
This file has been renamed appropriately to allow the
introduction of the generic mailbox API framework.
Acked-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Logic has been added to the OMAP2+ mailbox code to parse the
mailbox dt nodes and construct the different sub-mailboxes
associated with the instance. The DT representation of the
sub-mailbox devices is different from legacy platform data
representation to allow flexibility of interrupt configuration
between Tx and Rx fifos (to also possibly allow simplex devices
in the future). The DT representation gathers similar information
that was being passed previously through the platform data, except
for the interrupt type information, which is gathered through driver
compatible match data.
The non-DT support has to be maintained for now to not break
OMAP3 legacy boot, and the legacy-style code will be cleaned
up once OMAP3 is also converted to DT-boot only.
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
A new structure, omap_mbox_device, is added to contain
the global variables pertinent to a mailbox h/w IP block.
This enables the support for having multiple instances of
the same h/w IP block in the SoC. This is in preparation
to support the DRA7 SoC, which is the first SoC in the OMAP
family to have multiple mailbox IP instances.
The changes include enhancements to the sub-mailbox registration
logic and mbox startup sequencing, removing the usage of single
global configuration variables for all h/w instances, and storing
the registered sub-mailboxes with the parent mailbox device
structure.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The structure omap_mbox_priv is used previously to store arch
specific (OMAP1 vs OMAP2+) data, and is no longer required to be
maintained separately. Instead, absorb its elements into either
the sub-mailbox device structure, omap_mbox, or the individual
fifo descriptor structure, omap_mbox_fifo.
The newmsg_bit and notfull_bit used on Rx and Tx fifos respectively
are represented by the new intr_bit field in the fifo descriptor
structure. The interrupt configuration registers are also moved
into the fifo descriptor structure to allow the Rx and Tx fifos
to use different interrupt lines/users.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
There is no need for a separate common OMAP mailbox module
now that the OMAP1 mailbox driver has been removed. So,
consolidate the two individual OMAP mailbox modules into a
single driver. This streamlines the driver for converting
to mailbox framework.
The following are the main changes:
- collapse mailbox-omap2.c into omap-mailbox.c
- remove omap_mbox_ops and replace the ops calls with
the equivalent functionality.
- simplify the sub-mailbox startup/shutdown functionality,
the one-time operations are moved into probe, and the
pm_runtime_get_sync and pm_runtime_put_sync can be invoked
without using a configuration counter.
- move all definitions from private omap_mbox.h into the
source code, and eliminate this internal header.
- rename some variables that used the omap2_mbox prefix with
a generic omap_mbox prefix.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The OMAP mailbox IP has two different type of interrupt configuration
registers between OMAP4+ SoCs and OMAP2/3 SoCs. Simplify the current
interrupt configuration by using a single macro that translates the
two variants.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The type definition omap_mbox_type_t used for distinguishing
OMAP1 from OMAP2+ mailboxes is no longer needed after the
removal of OMAP1 mailbox driver, and has therefore been
cleaned up. This cleanup also eliminates the need for the
polling logic used for checking the transmit readiness.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
There are no existing users for OMAP1 mailbox driver
in kernel. Commit ab6f775 "Removing dead OMAP_DSP"
has cleaned up all the dead code related to the only
possible user, including the creation of the mailbox
platform device.
Remove this stale driver so that the OMAP mailbox
driver can be simplified and streamlined better for
converting to mailbox framework.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Use the various devm_ interfaces to simplify the cleanup in
probe and remove functions in OMAP2+ mailbox driver.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
There is a bug in omap2_mbox_probe() where we try do:
mbox->irq = platform_get_irq(pdev, info->irq_id);
if (mbox->irq < 0) {
The problem is that mbox->irq is unsigned so the error handling doesn't
work. I've changed it to a signed integer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The mailbox hardware (in OMAP) uses a queued mailbox interrupt
mechanism that provides a communication channel between processors
through a set of registers and their associated interrupt signals
by sending and receiving messages.
The OMAP mailbox framework/driver code is moved to be under
drivers/mailbox, in preparation for adapting to a common mailbox
driver framework. This allows the build for OMAP mailbox to be
enabled (it was disabled during the multi-platform support).
As part of the migration from plat and mach code:
- Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers.
- mailbox.h under plat-omap/plat/include has been split into a public
and private header files. The public header has only the API related
functions and types.
- The module name mailbox.ko from plat-omap is changed to
omap-mailbox.ko
- The module name mailbox_mach.ko from mach-omapX is changed as
mailbox_omap1.ko for OMAP1
mailbox_omap2.ko for OMAP2+
Cc: Tony Lindgren <tony@atomide.com>
[gregkh@linuxfoundation.org: ack for staging part]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
|
|
Avoids a section mismatch.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pl320 IPC allows for interprocessor communication between the
highbank A9 and the EnergyCore Management Engine. The pl320 implements
a straightforward mailbox protocol.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
