| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2018-06-12 | treewide: devm_kzalloc() -> devm_kcalloc() | Kees Cook | |
| The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org> | |||
| 2017-11-14 | mailbox/omap: unregister mbox class | Arvind Yadav | |
| platform_driver_register() can fail here and we must unregister mbox class. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: kill omap_mbox_{save/restore}_ctx() functions | Suman Anna | |
| The omap_mbox_save_ctx() and omap_mbox_restore_ctx() API were previously provided to OMAP mailbox clients to save and restore the mailbox context during system suspend/resume. The save and restore functionality is now implemented through System PM driver callbacks, and there is no need for these functions, so kill these API. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: check for any unread messages during suspend | Suman Anna | |
| The OMAP mailbox driver is used by clients to communicate with remote processors in general. The mailbox clients are expected to have stopped communicating with these remote processors during a system suspend. The OMAP mailbox fifos are expected to not have any messages as such. Add a check for any pending unprocessed messages in the suspend callback, to detect any communication protocol issues of the mailbox clients. The system suspend is aborted if any messages are found. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: add support for suspend/resume | Suman Anna | |
| Support has been added to the OMAP mailbox driver to allow it to work across a system suspend/resume. The OMAP mailbox driver requires only the interrupt configuration registers to be saved and restored, and this is done in the suspend/resume callbacks. The registers need to be saved only if there are active clients at the time of suspend. The enabling and disabling of the mailbox clocks is done automatically by the omap_device layer. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: store mailbox interrupt type in omap_mbox_device | Suman Anna | |
| The interrupt type used for identifying the layout of the interrupt configuration registers between OMAP4+ SoCs and older SoCs is stored only in the sub-mailbox structures for easier access. Store this type in the the omap_mbox_device structure as well along with the other global variables. This is being done to facilitate the context save and restore of appropriate registers during system suspend/resume. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: add blank lines after declarations | Suman Anna | |
| Fix couple of checkpatch warnings of the type, "WARNING: Missing a blank line after declarations" Also, fixed a warning about a space after a typecast while at this. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: remove FSF mailing address paragraph | Suman Anna | |
| Remove the paragraph about writing to the Free Software Foundation's mailing address from the GPL license header as this address can change. This fixes the corresponding checkpatch warning. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: use variable name for sizeof() operator | Suman Anna | |
| Fix the code formatting to use the kernel preferred style of using the actual variables to determize the size using the sizeof() operator. This fixes the corresponding checkpatch warning as well. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2016-04-26 | mailbox/omap: drop legacy platform device support | Suman Anna | |
| OMAP mailbox devices can no longer be created in legacy non-DT mode, all the relevant code has been cleaned up. The OMAP mailbox driver will only support devices created from DT going forward, so drop the legacy platform device support from the driver. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2015-10-23 | mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle | Dave Gerlach | |
| The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2015-05-12 | mailbox: Fix up error handling in mbox_request_channel() | Benson Leung | |
| mbox_request_channel() currently returns EBUSY in the event the controller is not present or if of_xlate() fails, but in neither case is EBUSY really appropriate. Return EPROBE_DEFER if the controller is not yet present and change of_xlate() to return an ERR_PTR instead of NULL so that the error can be propagated back to the caller of mbox_request_channel(). Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Suman Anna <s-anna@ti.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2015-05-12 | mailbox: Make mbox_chan_ops const | Andrew Bresticker | |
| The mailbox controller's channel ops ought to be read-only. Update all the mailbox drivers to make their mbox_chan_ops const as well. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org> Cc: Ley Foon Tan <lftan@altera.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2014-12-14 | Merge tag 'driver-core-3.19-rc1' of ↵ | Linus Torvalds | |
| git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ... | |||
| 2014-11-27 | mailbox/omap: adapt to the new mailbox framework | Suman Anna | |
| The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | |||
| 2014-10-20 | mailbox: drop owner assignment from platform_drivers | Wolfram Sang | |
| A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | |||
| 2014-09-11 | mailbox/omap: add support for parsing dt devices | Suman Anna | |
| Logic has been added to the OMAP2+ mailbox code to parse the mailbox dt nodes and construct the different sub-mailboxes associated with the instance. The DT representation of the sub-mailbox devices is different from legacy platform data representation to allow flexibility of interrupt configuration between Tx and Rx fifos (to also possibly allow simplex devices in the future). The DT representation gathers similar information that was being passed previously through the platform data, except for the interrupt type information, which is gathered through driver compatible match data. The non-DT support has to be maintained for now to not break OMAP3 legacy boot, and the legacy-style code will be cleaned up once OMAP3 is also converted to DT-boot only. Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> | |||
| 2014-07-29 | mailbox/omap: add a parent structure for every IP instance | Suman Anna | |
| A new structure, omap_mbox_device, is added to contain the global variables pertinent to a mailbox h/w IP block. This enables the support for having multiple instances of the same h/w IP block in the SoC. This is in preparation to support the DRA7 SoC, which is the first SoC in the OMAP family to have multiple mailbox IP instances. The changes include enhancements to the sub-mailbox registration logic and mbox startup sequencing, removing the usage of single global configuration variables for all h/w instances, and storing the registered sub-mailboxes with the parent mailbox device structure. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | |||
| 2014-07-29 | mailbox/omap: remove the private mailbox structure | Suman Anna | |
| The structure omap_mbox_priv is used previously to store arch specific (OMAP1 vs OMAP2+) data, and is no longer required to be maintained separately. Instead, absorb its elements into either the sub-mailbox device structure, omap_mbox, or the individual fifo descriptor structure, omap_mbox_fifo. The newmsg_bit and notfull_bit used on Rx and Tx fifos respectively are represented by the new intr_bit field in the fifo descriptor structure. The interrupt configuration registers are also moved into the fifo descriptor structure to allow the Rx and Tx fifos to use different interrupt lines/users. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | |||
| 2014-07-29 | mailbox/omap: consolidate OMAP mailbox driver | Suman Anna | |
| There is no need for a separate common OMAP mailbox module now that the OMAP1 mailbox driver has been removed. So, consolidate the two individual OMAP mailbox modules into a single driver. This streamlines the driver for converting to mailbox framework. The following are the main changes: - collapse mailbox-omap2.c into omap-mailbox.c - remove omap_mbox_ops and replace the ops calls with the equivalent functionality. - simplify the sub-mailbox startup/shutdown functionality, the one-time operations are moved into probe, and the pm_runtime_get_sync and pm_runtime_put_sync can be invoked without using a configuration counter. - move all definitions from private omap_mbox.h into the source code, and eliminate this internal header. - rename some variables that used the omap2_mbox prefix with a generic omap_mbox prefix. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | |||
| 2014-07-29 | mailbox/omap: remove omap_mbox_type_t from mailbox ops | Suman Anna | |
| The type definition omap_mbox_type_t used for distinguishing OMAP1 from OMAP2+ mailboxes is no longer needed after the removal of OMAP1 mailbox driver, and has therefore been cleaned up. This cleanup also eliminates the need for the polling logic used for checking the transmit readiness. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | |||
| 2013-06-11 | mailbox/omap: move the OMAP mailbox framework to drivers | Suman Anna | |
| The mailbox hardware (in OMAP) uses a queued mailbox interrupt mechanism that provides a communication channel between processors through a set of registers and their associated interrupt signals by sending and receiving messages. The OMAP mailbox framework/driver code is moved to be under drivers/mailbox, in preparation for adapting to a common mailbox driver framework. This allows the build for OMAP mailbox to be enabled (it was disabled during the multi-platform support). As part of the migration from plat and mach code: - Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers. - mailbox.h under plat-omap/plat/include has been split into a public and private header files. The public header has only the API related functions and types. - The module name mailbox.ko from plat-omap is changed to omap-mailbox.ko - The module name mailbox_mach.ko from mach-omapX is changed as mailbox_omap1.ko for OMAP1 mailbox_omap2.ko for OMAP2+ Cc: Tony Lindgren <tony@atomide.com> [gregkh@linuxfoundation.org: ack for staging part] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com> Signed-off-by: Suman Anna <s-anna@ti.com> | |||
 |
index : linux.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |