summaryrefslogtreecommitdiff
path: root/drivers/lightnvm
AgeCommit message (Collapse)Author
2018-07-18block: Add and use op_stat_group() for indexing disk_stat fields.Michael Callahan
Add and use a new op_stat_group() function for indexing partition stat fields rather than indexing them by rq_data_dir() or bio_data_dir(). This function works similarly to op_is_sync() in that it takes the request::cmd_flags or bio::bi_opf flags and determines which stats should et updated. In addition, the second parameter to generic_start_io_acct() and generic_end_io_acct() is now a REQ_OP rather than simply a read or write bit and it uses op_stat_group() on the parameter to determine the stat group. Note that the partition in_flight counts are not part of the per-cpu statistics and as such are not indexed via this function. It's now indexed by op_is_write(). tj: Refreshed on top of v4.17. Updated to pass around REQ_OP. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: assume that chunks are closed on 1.2 devicesHans Holmberg
We can't know if a block is closed or not on 1.2 devices, so assume closed state to make sure that blocks are erased before writing. Fixes: 32ef9412c114 ("lightnvm: pblk: implement get log report chunk") Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: add asynchronous partial readHeiner Litz
In the read path, partial reads are currently performed synchronously which affects performance for workloads that generate many partial reads. This patch adds an asynchronous partial read path as well as the required partial read ctx. Signed-off-by: Heiner Litz <hlitz@ucsc.edu> Reviewed-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: expose generic disk name on pr_* msgsMatias Bjørling
The error messages in pblk does not say which pblk instance that a message occurred from. Update each error message to reflect the instance it belongs to, and also prefix it with pblk, so we know the message comes from the pblk module. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: fix read_bitmap for 32bit archsMatias Bjørling
If using pblk on a 32bit architecture, and there is a need to perform a partial read, the partial read bitmap will only have allocated 32 entries, where as 64 are needed. Make sure that the read_bitmap is initialized to 64bits on 32bit architectures as well. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Igor Konopko <igor.j.konopko@intel.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: enable line minor version detectionMatias Bjørling
When recovering a line, an extra check was added when debugging was active, such that minor version where also checked. Unfortunately, this used the ifdef NVM_DEBUG, which is not correct. Instead use the proper DEBUG def, and now that it compiles, also fix the variable. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Fixes: d0ab0b1ab991f ("lightnvm: pblk: check data lines version on recovery") Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: move NVM_DEBUG to pblkMatias Bjørling
There is no users of CONFIG_NVM_DEBUG in the LightNVM subsystem. All users are in pblk. Rename NVM_DEBUG to NVM_PBLK_DEBUG and enable only for pblk. Also fix up the CONFIG_NVM_PBLK entry to follow the code style for Kconfig files. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-13lightnvm: pblk: handle case when mw_cunits equals to 0Marcin Dziegielewski
Some devices can expose mw_cunits equal to 0, it can cause the creation of too small write buffer and cause performance to drop on write workloads. Additionally, write buffer size must cover write data requirements, such as WS_MIN and MW_CUNITS - it must be greater than or equal to the larger one multiplied by the number of PUs. However, for performance reasons, use the WS_OPT value to calculation instead of WS_MIN. Because the place where buffer size is calculated was changed, this patch also removes pgs_in_buffer filed in pblk structure. Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-24Merge tag 'for-linus-20180623' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Further timeout fixes. We aren't quite there yet, so expect another round of fixes for that to completely close some of the IRQ vs completion races. (Christoph/Bart) - Set of NVMe fixes from the usual suspects, mostly error handling - Two off-by-one fixes (Dan) - Another bdi race fix (Jan) - Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron) * tag 'for-linus-20180623' of git://git.kernel.dk/linux-block: blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE bdi: Fix another oops in wb_workfn() lightnvm: Remove depends on HAS_DMA in case of platform dependency nvme-pci: limit max IO size and segments to avoid high order allocations nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl nvme-fc: release io queues to allow fast fail nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag. block: sed-opal: Fix a couple off by one bugs blk-mq-debugfs: Off by one in blk_mq_rq_state_name() nvmet: reset keep alive timer in controller enable nvme-rdma: don't override opts->queue_size nvme-rdma: Fix command completion race at error recovery nvme-rdma: fix possible free of a non-allocated async event buffer nvme-rdma: fix possible double free condition when failing to create a controller Revert "block: Add warning for bi_next not NULL in bio_endio()" block: fix timeout changes for legacy request drivers
2018-06-22lightnvm: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05lightnvm: pblk: fix resource leak of invalid_bitmapColin Ian King
Currently the error exit path when the emeta could not be interpreted is via fail_free_ws and this fails to free invalid_bitmap. Fix this by adding another exit label and exiting via this to kfree invalid_bitmap. Detected by CoverityScan, CID#1469659 ("Resource leak") Fixes: 48b8d20895f8 ("lightnvm: pblk: garbage collect lines with failed writes") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-05lightnvm: pblk: make symbol write_buffer_size staticWei Yongjun
Fixes the following sparse warning: drivers/lightnvm/pblk-init.c:23:14: warning: symbol 'write_buffer_size' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: take bitmap alloc. out of critical sectionJavier González
pblk allocates line bitmaps within the line lock unnecessarily. In order to take pressure out of the fast patch, allocate line bitmaps outside of this lock and refactor accordingly. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: kick writer on new flush pointsHans Holmberg
Unless we kick the writer directly when setting a new flush point, the user risks having to wait for up to one second (the default timeout for the write thread to be kicked) for the IO to complete. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: only try to recover lines with written smetaHans Holmberg
When switching between different lun configurations, there is no guarantee that all lines that contain closed/open chunks have some valid data to recover. Check that the smeta chunk has been written to instead. Also skip bad lines (that does not have enough good chunks). Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: remove unnecessary bio_get/putJavier González
In the read path, pblk gets a reference to the incoming bio and puts it after ending the bio. Though this behavior is correct, it is unnecessary since pblk is the one putting the bio, therefore, it cannot disappear underneath it. Removing this reference, allows to clean up rqd->bio and avoids pointer bouncing for the different read paths. Now, the incoming bio always resides in the read context and pblk's internal bios (if any) reside in rqd->bio. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: add possibility to set write buffer size manuallyMarcin Dziegielewski
In some cases, users can want set write buffer size manually, e.g. to adjust it to specific workload. This patch provides the possibility to set write buffer size via module parameter feature. Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: fix partial read error pathIgor Konopko
When error occurs during bio_add_page on partial read path, pblk tries to free pages twice. Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: proper error handling for pblk_bio_add_pagesIgor Konopko
Currently in case of error caused by bio_pc_add_page in pblk_bio_add_pages two issues occur when calling from pblk_rb_read_to_bio(). First one is in pblk_bio_free_pages, since we are trying to free pages not allocated from our mempool. Second one is the warn from dma_pool_free, that we are trying to free NULL pointer dma. This commit fix both issues. Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: fix smeta write error pathHans Holmberg
Smeta write errors were previously ignored. Skip these lines instead and throw them back on the free list, so the chunks will go through a reset cycle before we attempt to use the line again. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: garbage collect lines with failed writesHans Holmberg
Write failures should not happen under normal circumstances, so in order to bring the chunk back into a known state as soon as possible, evacuate all the valid data out of the line and let the fw judge if the block can be written to in the next reset cycle. Do this by introducing a new gc list for lines with failed writes, and ensure that the rate limiter allocates a small portion of the write bandwidth to get the job done. The lba list is saved in memory for use during gc as we cannot gurantee that the emeta data is readable if a write error occurred. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: rework write error recovery pathHans Holmberg
The write error recovery path is incomplete, so rework the write error recovery handling to do resubmits directly from the write buffer. When a write error occurs, the remaining sectors in the chunk are mapped out and invalidated and the request inserted in a resubmit list. The writer thread checks if there are any requests to resubmit, scans and invalidates any lbas that have been overwritten by later writes and resubmits the failed entries. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: remove dead functionJavier González
Remove dead function for manual sync. I/O Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pass flag on graceful teardown to targetsJavier González
If the namespace is unregistered before the LightNVM target is removed (e.g., on hot unplug) it is too late for the target to store any metadata on the device - any attempt to write to the device will fail. In this case, pass on a "gracefull teardown" flag to the target to let it know when this happens. In the case of pblk, we pad the open line (close all open chunks) to improve data retention. In the event of an ungraceful shutdown, avoid this part and just clean up. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: check for chunk size before allocating itJavier González
Do the check for the chunk state after making sure that the chunk type is supported. Fixes: 32ef9412c114 ("lightnvm: pblk: implement get log report chunk") Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: remove unnecessary argumentJavier González
Remove unnecessary argument on pblk_line_free() Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: remove unnecessary indirectionJavier González
Call nvm_submit_io directly and remove an unnecessary indirection on the read path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: return NVM_ error on failed submissionJavier González
Return a meaningful error when the sanity vector I/O check fails. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: warn in case of corrupted write bufferJavier González
When cleaning up buffer entries as we wrap up, their state should be "completed". If any of the entries is in "submitted" state, it means that something bad has happened. Trigger a warning immediately instead of waiting for the state flag to eventually be updated, thus hiding the issue. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: improve error msg on corrupted LBAsJavier González
In the event of a mismatch between the read LBA and the metadata pointer reported by the device, improve the error message to be able to detect the offending physical address (PPA) mapped to the corrupted LBA. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: check read lba on gc pathJavier González
Check that the lba stored in the LBA metadata is correct in the GC path too. This requires a new helper function to check random reads in the vector read. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: recheck for bad lines at runtimeJavier González
Bad blocks can grow at runtime. Check that the number of valid blocks in a line are within the sanity threshold before allocating the line for new writes. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01lightnvm: pblk: fail gracefully on line alloc. failureJavier González
In the event of a line failing to allocate, fail gracefully and stop the pipeline to avoid more write failing in the same place. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30lightnvm: convert to bioset_init()/mempool_init()Kent Overstreet
Convert lightnvm to embedded bio sets. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: pblk: remove some unnecessary NULL checksDan Carpenter
Smatch complains that flush_workqueue() dereferences the work queue pointer but then we check if it's NULL on the next line when it's too late. These NULL checks can be removed because the module won't load if we can't allocate the work queues. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: pblk: don't recover unwritten linesHans Holmberg
If the line has not been written to, we should not try to recover any data from it, so check the state of the chunks in the line before attempting to read smeta. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: pblk: implement 2.0 supportJavier González
Implement 2.0 support in pblk. This includes the address formatting and mapping paths, as well as the sysfs entries for them. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: pblk: implement get log report chunkJavier González
In preparation of pblk supporting 2.0, implement the get log report chunk in pblk. Also, define the chunk states as given in the 2.0 spec. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: pblk: rename ppaf* to addrf*Javier González
In preparation for 2.0 support in pblk, rename variables referring to the address format to addrf and reserve ppaf for the 1.2 path. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: pblk: check for supported versionJavier González
At this point, only 1.2 spec is supported, thus check for it. Also, since device-side L2P is only supported in the 1.2 spec, make sure to only check its value under 1.2. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: implement get log report chunk helpersJavier González
The 2.0 spec provides a report chunk log page that can be retrieved using the stangard nvme get log page. This replaces the dedicated get/put bad block table in 1.2. This patch implements the helper functions to allow targets retrieve the chunk metadata using get log page. It makes nvme_get_log_ext available outside of nvme core so that we can use it form lightnvm. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: make address conversions depend on generic deviceJavier González
On address conversions, use the generic device, instead of the target device. This allows to use conversions outside of the target's realm. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: add support for 2.0 address formatJavier González
Add support for 2.0 address format. Also, align address bits for 1.2 and 2.0 to be able to operate on channel and luns without requiring a format conversion. Use a generic address format for this purpose. Also, convert the generic operations to the generic format in pblk. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: normalize geometry nomenclatureJavier González
Normalize nomenclature for naming channels, luns, chunks, planes and sectors as well as derivations in order to improve readability. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 06:59:50 +0000