| Age | Commit message (Collapse) | Author |
|---|
|
Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.
Cc: stable <stable@vger.kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 248b57015f35c94d4eae2fdd8c6febf5cd703900.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read")
Link: https://lore.kernel.org/r/20210503115736.2104747-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Nothing too exciting here, just some fixes"
* tag 'leds-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: pca9532: Assign gpio base dynamically
leds: trigger: pattern: Switch to using the new API kobj_to_dev()
leds: LEDS_BLINK_LGM should depend on X86
leds: lgm: Fix spelling mistake "prepate" -> "prepare"
MAINTAINERS: Remove Dan Murphy's bouncing email
leds-lm3642: convert comma to semicolon
leds: rt4505: Add support for Richtek RT4505 flash LED controller
leds: rt4505: Add DT binding document for Richtek RT4505
leds: Kconfig: LEDS_CLASS is usually selected.
leds: lgm: Improve Kconfig help
leds: lgm: fix gpiolib dependency
|
|
When using devicetree, gpio_base holds its initial zero value which can
lead to a rejection if another gpio controller already occupies this
base. To prevent that collision let the gpio base be assigned dynamically.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Switch to using the new API kobj_to_dev() to fix the below warnning:
./drivers/leds/trigger/ledtrig-pattern.c:336:60-61: WARNING opportunity
for kobj_to_dev()
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The Intel Lightning Mountain (LGM) Serial Shift Output controller (SSO)
is only present on Intel Lightning Mountain SoCs. Hence add a
dependency on X86, to prevent asking the user about this driver when
configuring a kernel without Intel Lightning Mountain platform support.
While at it, merge the other dependencies into a single statement.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for RT4505 flash LED controller. It can support up to 1.5A
flash current with hardware timeout and low input voltage protection.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
People should really say Y to the LEDS_CLASS prompt.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Remove unnecessary Kconfig symbol LEDS_BLINK
Improve Kconfig help text to make it more useful.
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
led_set_brightness() involves scheduling a workqueue. As here the led's
brightness setting is done in context of the trigger's workqueue this is
unjustified overhead and it's more sensible to use
led_set_brightness_sync().
Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Reported-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210219133307.4840-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ttyname is allocated before the mutex is taken, so it must not be
unlocked in the error path.
Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger")
Reported-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210219133307.4840-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without gpiolib, the driver fails to build:
drivers/leds/blink/leds-lgm-sso.c:123:19: error: field has incomplete type 'struct gpio_chip'
struct gpio_chip chip;
^
include/linux/gpio.h:107:8: note: forward declaration of 'struct gpio_chip'
struct gpio_chip;
^
drivers/leds/blink/leds-lgm-sso.c:263:3: error: implicit declaration of function 'gpiod_set_value' [-Werror,-Wimplicit-function-declaration]
gpiod_set_value(led->gpiod, val);
^
drivers/leds/blink/leds-lgm-sso.c:263:3: note: did you mean 'gpio_set_value'?
include/linux/gpio.h:168:20: note: 'gpio_set_value' declared here
static inline void gpio_set_value(unsigned gpio, int value)
^
drivers/leds/blink/leds-lgm-sso.c:345:3: error: implicit declaration of function 'gpiod_set_value' [-Werror,-Wimplicit-function-declaration]
gpiod_set_value(led->gpiod, 1);
^
Add the dependency in Kconfig.
Fixes: c3987cd2bca3 ("leds: lgm: Add LED controller driver for LGM SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Besides the usual fixes and new drivers, we are changing CLASS_FLASH
to return success to make it easier to work with V4L2 stuff disabled,
and we are getting rid of enum that should have been plain integer
long time ago. I'm slightly nervous about potential warnings, but it
needed to be fixed at some point"
* tag 'leds-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: lp50xx: Get rid of redundant explicit casting
leds: lp50xx: Update headers block to reflect reality
leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable()
leds: lp50xx: Reduce level of dereferences
leds: lp50xx: Switch to new style i2c-driver probe function
leds: lp50xx: Don't spam logs when probe is deferred
leds: apu: extend support for PC Engines APU1 with newer firmware
leds: flash: Fix multicolor no-ops registration by return 0
leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH
leds: lgm: Add LED controller driver for LGM SoC
dt-bindings: leds: Add bindings for Intel LGM SoC
leds: led-core: Get rid of enum led_brightness
leds: gpio: Set max brightness to 1
leds: lm3533: Switch to using the new API kobj_to_dev()
leds: ss4200: simplify the return expression of register_nasgpio_led()
leds: Use DEVICE_ATTR_{RW, RO, WO} macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver changes for 5.12-rc1.
Nothing huge, just lots of good cleanups and additions:
- n_tty line discipline cleanups
- vt core cleanups and reworks to make the code more "modern"
- stm32 driver additions
- tty led support added to the tty core and led layer
- minor serial driver fixups and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
serial: core: Remove BUG_ON(in_interrupt()) check
vt_ioctl: Remove in_interrupt() check
dt-bindings: serial: imx: Switch to my personal address
vt: keyboard, use new API for keyboard_tasklet
serial: stm32: improve platform_get_irq condition handling in init_port
serial: ifx6x60: Remove driver for deprecated platform
tty: fix up iterate_tty_read() EOVERFLOW handling
tty: fix up hung_up_tty_read() conversion
tty: fix up hung_up_tty_write() conversion
tty: teach the n_tty ICANON case about the new "cookie continuations" too
tty: teach n_tty line discipline about the new "cookie continuations"
tty: clean up legacy leftovers from n_tty line discipline
tty: implement read_iter
tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
serial: remove sirf prima/atlas driver
serial: mxs-auart: Remove <asm/cacheflush.h>
serial: mxs-auart: Remove serial_mxs_probe_dt()
serial: fsl_lpuart: Use of_device_get_match_data()
dt-bindings: serial: renesas,hscif: Add r8a779a0 support
tty: serial: Drop unused efm32 serial driver
...
|
|
In the line like
u32 bar = ...;
u8 foo = (u8)(bar >> 8) & 0xff;
is no need to have neither explicit casting nor ' & 0xff' part.
Get rid of them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The OF is not used in the driver, thus the OF headers are not needed,
but mod_devicetable.h is missed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Since GPIO is optional the API is NULL aware and will check descriptor anyway.
Remove duplicate redundant check in lp50xx_enable_disable().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The priv->dev is effectively the same as &priv->client->dev.
So, drop the latter for the former.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Switch to the new style i2c-driver probe_new probe function.
Note we do not have any old style board files using this but
user still has a possibility to instantiate device from sysfs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
When requesting GPIO line the probe can be deferred.
In such case don't spam logs with an error message.
This can be achieved by switching to dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The DMI_PRODUCT_NAME entry on current firmware of PC Engines APU1 changed
from "APU" to "apu1"
This modification adds the missing DMI data and thereby the LED support for
the PC Engines APU1 with firmware versions >= 4.6.8.
Signed-off-by: Andreas Eberlein <foodeas@aeberlein.de>
Tested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Parallel to serial conversion, which is also called SSO controller,
can drive external shift register for LED outputs, reset or
general purpose outputs.
This driver enables LED support for Serial Shift Output Controller (SSO).
Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
This gets rid of enum led_brightness in the main led files,
because it is deprecated, and an unsigned int can be used instead.
We can get rid of led_brightness completely and
patches can also be supplied for the other drivers' files.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The leds-rt8515 driver can optionall use the v4l2 flash led class,
but it causes a link error when that class is in a loadable module
and the rt8515 driver itself is built-in:
ld.lld: error: undefined symbol: v4l2_flash_init
>>> referenced by leds-rt8515.c
>>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive
drivers/built-in.a
Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that,
but it would make it impossible to use the driver without the
v4l2 support.
Add the same dependency that the other users of this class have
instead, which just prevents the broken configuration.
Fixes: e1c6edcbea13 ("leds: rt8515: Add Richtek RT8515 LED driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
GPIO LEDs only know 2 states: ON or OFF and do not have PWM capabilities.
However, the max brightness is reported as 255.
This patch sets the max brightness value of a GPIO controlled LED to 1.
Tested on my PinePhone 1.2.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
fixed the following coccicheck:
drivers/leds/leds-lm3533.c:611:60-61: WARNING opportunity for kobj_to_dev().
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.
This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.
A V4L interface is added.
We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.
Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
We have the following potential deadlock condition:
========================================================
WARNING: possible irq lock inversion dependency detected
5.10.0-rc2+ #25 Not tainted
--------------------------------------------------------
swapper/3/0 just changed the state of lock:
ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
but this lock took another, HARDIRQ-READ-unsafe lock in the past:
(&trig->leddev_list_lock){.+.?}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&trig->leddev_list_lock);
local_irq_disable();
lock(&host->lock);
lock(&trig->leddev_list_lock);
<Interrupt>
lock(&host->lock);
*** DEADLOCK ***
no locks held by swapper/3/0.
the shortest dependencies between 2nd lock and 1st lock:
-> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
HARDIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
IN-SOFTIRQ-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
kbd_bh+0x9e/0xc0
tasklet_action_common.constprop.0+0xe9/0x100
tasklet_action+0x22/0x30
__do_softirq+0xcc/0x46d
run_ksoftirqd+0x3f/0x70
smpboot_thread_fn+0x116/0x1f0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
SOFTIRQ-ON-R at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
INITIAL READ USE at:
lock_acquire+0x15f/0x420
_raw_read_lock+0x42/0x90
led_trigger_event+0x2b/0x70
rfkill_global_led_trigger_worker+0x94/0xb0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
}
... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10
... acquired at:
_raw_read_lock+0x42/0x90
led_trigger_blink_oneshot+0x3b/0x90
ledtrig_disk_activity+0x3c/0xa0
ata_qc_complete+0x26/0x450
ata_do_link_abort+0xa3/0xe0
ata_port_freeze+0x2e/0x40
ata_hsm_qc_complete+0x94/0xa0
ata_sff_hsm_move+0x177/0x7a0
ata_sff_pio_task+0xc7/0x1b0
process_one_work+0x240/0x560
worker_thread+0x58/0x3d0
kthread+0x151/0x170
ret_from_fork+0x1f/0x30
-> (&host->lock){-...}-{2:2} ops: 69 {
IN-HARDIRQ-W at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
INITIAL USE at:
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_dev_init+0x54/0xe0
ata_link_init+0x8b/0xd0
ata_port_alloc+0x1f1/0x210
ata_host_alloc+0xf1/0x130
ata_host_alloc_pinfo+0x14/0xb0
ata_pci_sff_prepare_host+0x41/0xa0
ata_pci_bmdma_prepare_host+0x14/0x30
piix_init_one+0x21f/0x600
local_pci_probe+0x48/0x80
pci_device_probe+0x105/0x1c0
really_probe+0x221/0x490
driver_probe_device+0xe9/0x160
device_driver_attach+0xb2/0xc0
__driver_attach+0x91/0x150
bus_for_each_dev+0x81/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x138/0x1f0
driver_register+0x91/0xf0
__pci_register_driver+0x73/0x80
piix_init+0x1e/0x2e
do_one_initcall+0x5f/0x2d0
kernel_init_freeable+0x26f/0x2cf
kernel_init+0xe/0x113
ret_from_fork+0x1f/0x30
}
... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10
... acquired at:
__lock_acquire+0x9da/0x2370
lock_acquire+0x15f/0x420
_raw_spin_lock_irqsave+0x52/0xa0
ata_bmdma_interrupt+0x27/0x200
__handle_irq_event_percpu+0xd5/0x2b0
handle_irq_event+0x57/0xb0
handle_edge_irq+0x8c/0x230
asm_call_irq_on_stack+0xf/0x20
common_interrupt+0x100/0x1c0
asm_common_interrupt+0x1e/0x40
native_safe_halt+0xe/0x10
arch_cpu_idle+0x15/0x20
default_idle_call+0x59/0x1c0
do_idle+0x22c/0x2c0
cpu_startup_entry+0x20/0x30
start_secondary+0x11d/0x150
secondary_startup_64_no_verify+0xa6/0xab
This lockdep splat is reported after:
commit e918188611f0 ("locking: More accurate annotations for read_lock()")
To clarify:
- read-locks are recursive only in interrupt context (when
in_interrupt() returns true)
- after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
that holds trig->leddev_list_lock in read-mode
- when CPU1 (ata_ac_complete()) tries to read-lock
trig->leddev_list_lock, it would be blocked by the write-lock waiter
on CPU2 (because we are not in interrupt context, so the read-lock is
not recursive)
- at this point if an interrupt happens on CPU0 and
ata_bmdma_interrupt() is executed it will try to acquire host->lock,
that is held by CPU1, that is currently blocked by CPU2, so:
* CPU0 blocked by CPU1
* CPU1 blocked by CPU2
* CPU2 blocked by CPU0
*** DEADLOCK ***
The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):
CPU 0: CPU 1: CPU 2:
----- ----- -----
led_trigger_event():
read_lock(&trig->leddev_list_lock);
<workqueue>
ata_hsm_qc_complete():
spin_lock_irqsave(&host->lock);
write_lock(&trig->leddev_list_lock);
ata_port_freeze():
ata_do_link_abort():
ata_qc_complete():
ledtrig_disk_activity():
led_trigger_blink_oneshot():
read_lock(&trig->leddev_list_lock);
// ^ not in in_interrupt() context, so could get blocked by CPU 2
<interrupt>
ata_bmdma_interrupt():
spin_lock_irqsave(&host->lock);
Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.
Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.
Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Usage is as follows:
myled=ledname
tty=ttyS0
echo tty > /sys/class/leds/$myled/trigger
echo $tty > /sys/class/leds/$myled/ttyname
. When this new trigger is active it periodically checks the tty's
statistics and when it changed since the last check the led is flashed
once.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210113173018.bq2fkea2o3yp6rf6@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Instead of open coding DEVICE_ATTR() defines, use the
DEVICE_ATTR_RW(), DEVICE_ATTR_WO(), and DEVICE_ATTR_RO()
macros.
This required a few functions to be renamed, but the functionality
itself is unchanged.
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
LED core does not allow LED_COLOR_ID_MULTI for now and instead for RGB
LEDs prefers LED_COLOR_ID_RGB.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 77dce3a22e89 ("leds: disallow /sys/class/leds/*:multi:* for now")
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use kstrtoul instead of sscanf to satisfy checkpatch.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Although checkpatch changed the max-line-length default to 100 columns,
we still prefer 80 columns somewhere.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use integer constants directly when building I2C messages for LED color
change command, instead of macros. The command is simple enough to
understand what is going on even without these names.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
In case of memory allocation failure, we must release some resources as
done in all other error handling paths of the function.
'goto child_out' instead of a direct return so that 'fwnode_handle_put()'
is called when we break out of a 'device_for_each_child_node' loop.
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
if of_find_device_by_node() succeed, netxbig_leds_get_of_pdata() doesn't
have a corresponding put_device(). Thus add jump target to fix the
exception handling for this function implementation.
Fixes: 2976b1798909 ("leds: netxbig: add device tree binding")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Since commit 141f15c66d94 ("leds: pwm: remove header") that platform
interface is not usable from outside and there seems to be no in tree
user anymore. All in-tree users of the leds-pwm driver seem to use DT
currently. Getting rid of the old platform interface allows the
leds-pwm driver to switch over from 'devm_led_classdev_register()' to
'devm_led_classdev_register_ext()'.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Cc: Denis Osterland-Heim <denis.osterland@diehl.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
If both LED banks aren't used in device tree, an out-of-bounds
condition in lm3697_init occurs because of the for loop assuming that
all the banks are used. Fix it by adding a variable that contains the
number of used banks.
Signed-off-by: Gabriel David <ultracoolguy@tutanota.com>
[removed extra rename, minor tweaks]
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@kernel.org
|
|
Do not match OF match pointer with of_match_ptr, so that even if
CONFIG_OF is disabled, the driver can still be bound via another method.
Move definition of of_ns2_leds_match just before ns2_led_driver
definition, since it is not needed sooner.
Signed-off-by: Marek Behún <kabel@kernel.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Convert from OF api to fwnode API, so that it is possible to bind this
driver without device-tree.
The fwnode API does not expose a function to read a specific element of
an array. We therefore change the types of the ns2_led_modval structure
so that we can read the whole modval array with one fwnode call.
Signed-off-by: Marek Behún <kabel@kernel.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
In one of the error paths of the for_each_child_of_node loop in
tlc591xx_probe, add missing call to of_node_put.
Fixes: 1ab4531ad132 ("leds: tlc591xx: simplify driver by using the managed led API")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Previously if the `label` DT property was not present, the code composed
name for the LED in the form
"pca963x:%d:%.2x:%u"
For backwards compatibility we therefore set init_data->default_label
to this value so that the LED will not get a different name if `label`
property is not present, nor are `color` and `function`.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Register LEDs immediately after parsing their properties.
This allows us to get rid of platdata, and since no one in tree uses
header linux/platform_data/leds-pca963x.h, remove it.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Remove the binding comment at the beginning. The information for
platdata is now obsolete and DT binding is documented in device-tree
bindings.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: NeilBrown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
