summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)Author
2012-05-29leds: add LM3533 LED driverJohan Hovold
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels, hardware accelerated blinking as well as ambient-light-sensor and pwm input control. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/leds/leds-pca955x.c: fix race condition while setting brightness on ↵Alexander Stein
several LEDs When issuing the following command: for I in 0 1 2 3 4 5 6 7; do echo 0 > /sys/class/leds/pca955x\:${I}/brightness; done It is possible that all the pca955x_read_ls calls are done sequentially before any pca955x_write_ls call is done. This updates the LS only to the last LED update in its set. Fix this by using a global lock for the pca995x device during pca955x_led_work. Also used a struct for shared data betreen all LEDs. [akpm@linux-foundation.org: revert unintentional rename of pca955x_ledsel()] Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: add new transient trigger for one shot timer activationShuah Khan
The leds timer trigger does not currently have an interface to activate a one shot timer. The current support allows for setting two timers, one for specifying how long a state to be on, and the second for how long the state to be off. The delay_on value specifies the time period an LED should stay in on state, followed by a delay_off value that specifies how long the LED should stay in off state. The on and off cycle repeats until the trigger gets deactivated. There is no provision for one time activation to implement features that require an on or off state to be held just once and then stay in the original state forever. Without one shot timer interface, user space can still use timer trigger to set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. As a specific example of this use-case, let's look at vibrate feature on phones. Vibrate function on phones is implemented using PWM pins on SoC or PMIC. There is a need to activate one shot timer to control the vibrate feature, to prevent user space crashes leaving the phone in vibrate mode permanently causing the battery to drain. This trigger exports three properties, activate, state, and duration When transient trigger is activated these properties are set to default values. - duration allows setting timer value in msecs. The initial value is 0. - activate allows activating and deactivating the timer specified by duration as needed. The initial and default value is 0. This will allow duration to be set after trigger activation. - state allows user to specify a transient state to be held for the specified duration. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: NeilBrown <neilb@suse.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: heartbeat: stop on shutdownAlexander Holler
A halted kernel should not show a heartbeat. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Alexander Holler <holler@ahsoftware.de> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/leds/leds-lm3530.c: simplify als configuration on initializationKim, Milo
For better code readability, ALS code is moved to new a function - lm3530_als_configure() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: change ledtrig-timer to use activated flagShuah Khan
Change existing timer trigger to use the new ->activated flag to set activate successful status in activate routine and check it in deactivate routine to do cleanup. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: change existing triggers to use activated flagShuah Khan
Change existing triggers backlight, gpio, and heartbeat to use the new ->activated flag to set activate successful status in their activate routines and check it in their deactivate routines to do cleanup. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: Use kcalloc instead of kzalloc to allocate arrayThomas Meyer
The advantage of kcalloc is that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: simple_strtoul() cleanupShuah Khan
led-class.c and ledtrig-timer.c still use simple_strtoul(). Change them to use kstrtoul() instead of obsolete simple_strtoul(). Also fix the existing int ret declaration to be ssize_t to match the return type for _store functions in ledtrig-timer.c. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: driver for DA9052/53 PMIC v2David Dajun Chen
LED Driver for Dialog Semiconductor DA9052/53 PMICs. [akpm@linux-foundation.org: make led_reg static] Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29drivers/leds/leds-lp5521.c: fix lp5521_read() error handlingDan Carpenter
Gcc 4.6.2 complains that: drivers/leds/leds-lp5521.c: In function `lp5521_load_program': drivers/leds/leds-lp5521.c:214:21: warning: `mode' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c: In function `lp5521_probe': drivers/leds/leds-lp5521.c:788:5: warning: `buf' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c:740:6: warning: `ret' may be used uninitialized in this function [-Wuninitialized] These are real problems if lp5521_read() returns an error. When that happens we should handle it, instead of ignoring it or doing a bitwise OR with all the other error codes and continuing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Milo <Milo.Kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-10drivers/leds: correct __devexit annotationsArnd Bergmann
__devexit functions are discarded without CONFIG_HOTPLUG, so they need to be referenced carefully. A __devexit function may also not be called from a __devinit function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-17leds-atmel-pwm.c: Make pwmled_probe() __devinitNicolas Ferre
Commit 892a884 (leds: convert led platform drivers to module_platform_driver) is omitting the section mismatch error: so change annotation of the probe function to __devinit instead of __init. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2012-03-28Merge tag 'mfd_3.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...
2012-03-27Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson: "These changes are all specific to one board only. We're trying to keep the number of board files low, but generally board level updates are ok on platforms that are working on moving towards DT based probing, which will eventually lead to removing them. The board-ams-delta.c board file gets a conflict between the removal of ams_delta_config and the addition of a lot of other data. The Kconfig file has two changes in the same line, and in exynos, the power domain cleanup conflicts with the addition of the image sensor device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended a fix for a mismerge to board-omap4panda.c] Signed-off-by: Olof Johansson <olof@lixom.net>" Fixed up some fairly trivial conflicts manually. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits) i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board ARM: EXYNOS: Register JPEG on nuri ARM: EXYNOS: Register JPEG on universal_c210 ARM: S5PV210: Enable JPEG on SMDKV210 ARM: S5PV210: Add JPEG board definition ARM: EXYNOS: Enable JPEG on Origen ARM: EXYNOS: Enable JPEG on SMDKV310 ARM: EXYNOS: Add __init attribute to universal_camera_init() ARM: EXYNOS: Add __init attribute to nuri_camera_init() ARM: S5PV210: Enable FIMC on SMDKC110 ARM: S5PV210: Enable FIMC on SMDKV210 ARM: S5PV210: Enable MFC on SMDKC110 ARM: S5PV210: Enable MFC on SMDKV210 ARM: EXYNOS: Enable G2D on SMDKV310 ARM: tegra: update defconfig ...
2012-03-27Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
2012-03-23led-class: change back LEDS_CLASS to tristate instead of boolBryan Wu
After moving some core functions to led-core.c, led-class.c can be built as module again. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lm3530.c: move the code setting gen_config to one placeAxel Lin
Improve the readability by moving the code setting gen_config to one place. [akpm@linux-foundation.org: fix some patch skew] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: "Milo(Woogyom) Kim" <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-pca9633.c: remove unused 'adapter' variableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Peter Meerwald <p.meerwald@bct-electronic.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23leds-lm3530: replace pltfm with pdataKim, Milo
Use 'pdata' rather than 'pltfm' in lm3530_init_registers(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23leds-lm3530: remove LM3530_ALS_ZONE_REG codeKim, Milo
LM3530_ALS_ZONE_REG is read-only register. Writing this register is not necessary. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23leds-lm3530: support pwm input modeKim, Milo
* add 'struct lm3530_pwm_data' in the platform data The pwm data is the platform specific functions which generate the pwm. The pwm data is only valid when brightness is pwm input mode. Functions should be implemented by the pwm driver. pwm_set_intensity() : set duty of pwm. pwm_get_intensity() : get current the brightness. * brightness control by pwm If the control mode is pwm, then brightness is changed by the duty of pwm=. So pwm platform function should be called in lm3530_brightness_set(). * do not update brightness register when pwm input mode In pwm input mode, brightness register is not used. If any value is updated in this register, then the led will be off. * when input mode is changed, set duty of pwm to 0 if unnecessary. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23leds-lm3530: replace i2c_client with led_classdevKim, Milo
To get members of lm3530_data, use 'struct led_classdev' rather than 'struct i2c_client'. [akpm@linux-foundation.org: fix 80-column fixes more nicely] Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23leds-lm3530: set the max_brightness to 127Kim, Milo
Only 7 bits are used for updating the brightness. (register address : A0h) So the max_brightness property of lm3530 should be set to 127. On initializing registers, maximum initial brightness is limited to 'max_brightness'. Division-by-two is removed on updating the brightness. This arithmetic is not necessary because the range of brightness is 0 ~ 127= . Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-gpio.c: use linux/gpio.h rather than asm/gpio.hMark Brown
Direct usage of the asm include has long been deprecated by the introduction of gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds: add driver for PCA9633 I2C chipPeter Meerwald
Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness levels. [akpm@linux-foundation.org: fix kcalloc() call] [axel.lin@gmail.com: fix kcalloc parameters swapped] Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5523.c: constify some dataAndrew Morton
Saves ~50 bytes text and speeds things up. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: ret may be uninitializedSrinidhi KASAGAR
Fix it by assigning the lp5521_read return value. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Cc: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: redefinition of register bitsKim, Milo
For better readability, values of LP5521_REG_ENABLE register were redefined= . Additional definitions: LP5521_ENABLE_DEFAULT and LP5521_ENABLE_RUN_PROGRAM= . Use definition rather than hard code value. : 0x3F -> 'LP5521_CMD_DIRECT' Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: support led pattern dataKim, Milo
The lp5521 has autonomous operation mode without external control. Using lp5521_platform_data, various led patterns can be configurable. For supporting this feature, new functions and device attribute are added. Structure of lp5521_led_pattern: 3 channels are supported - red, green and blue. Pattern(s) of each channel and numbers of pattern(s) are defined in the pla= tform data. Pattern data are hexa codes which include pattern commands such like set pwm, wait, ramp up/down, branch and so on. Pattern mode functions: * lp5521_clear_program_memory Before running new led pattern, program memory should be cleared. * lp5521_write_program_memory Pattern data updated in the program memory via the i2c. * lp5521_get_pattern Get pattern from predefined in the platform data. * lp5521_run_led_pattern Stop current pattern or run new pattern. Transition time is required between different operation mode. Device attribute - 'led_pattern': To load specific led pattern, new device attribute is added. When the lp5521 driver is unloaded, stop current led pattern mode. Documentation updated : description about how to define the led patterns and example. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: add 'update_config' in the lp5521_platform_dataKim, Milo
The value of CONFIG register(Addr 08h) is configurable. For supporting this feature, update_config is added in the platform data. If 'update_config' is not defined, the default value is 'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'. To define CONFIG register in the platform data, the bit definitions were mo= ved to the header file. Documentation updated : description about 'update_config' and example. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: add 'name' in the lp5521_led_configKim, Milo
The name of each led channel can be configurable. For the compatibility, the name is set to default value(xx:channelN) when 'name' is not defined. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-tca6507.c: remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: NeilBrown <neilb@suse.de> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-tca6507.c: cleanup error handling in tca6507_probe()Dan Carpenter
Just a small tidy-up. 1) There is a NULL dereference if the tca allocation fails. 2) The call to cancel_work_sync() isn't needed because we haven't scheduled any work. 3) The call to i2c_set_clientdata() isn't needed because the core handles that automatically if probe() fails. 4) I added some curly braces for style reasons. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: fix typoMasanari Iida
"reseting" -> "resetting" Signed-off-by: Masanari Iida <standby24x7@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-14Merge tag 'v3.3-rc7' into x86/platformIngo Molnar
Merge reason: Update to the almost-final v3.3 kernel. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-08Merge branch 'next/cleanup-s3c24xx' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup * 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits) ARM: S3C24XX: remove call to s3c24xx_setup_clocks ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443 ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443 ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443 ARM: S3C24XX: remove obsolete S3C2416_DMA option ARM: S3C24XX: Reuse S3C2443 dma for S3C2416 ARM: S3C24XX: Fix indentation of dma-s3c2443 ARM: S3C24XX: Move device setup files to mach directory ARM: S3C24XX: Consolidate Simtec extensions ARM: S3C24XX: move simtec-specific code to mach directory ARM: S3C24XX: Move common-smdk code to mach directory ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx ARM: s3c2410_defconfig: update s3c2410_defconfig ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/ ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/ ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/ ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX ARM: S3C2410: move s3c2410_baseclk_add to clock.h ...
2012-03-07Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xxKukjin Kim
Conflicts: arch/arm/mach-s3c24xx/include/mach/system.h
2012-03-06led: Modified power control of pm860x ledJett.Zhou
Since several sub modules such as backlight, leds and vibrator depend on the refernce group and internal oscillator in pm8606, so modified the power control of led in pm8606 by unified interface. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06x86/geode/net5501: Add platform driver for Soekris Engineering net5501Philip Prindeville
Add platform driver for the Soekris Engineering net5501 single-board computer. Probes well-known locations in ROM for BIOS signature to confirm correct platform. Registers 1 LED and 1 GPIO-based button (typically used for soft reset). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andres Salomon <dilinger@queued.net> Cc: Matthew Garrett <mjg@redhat.com> [ Removed Kconfig and Makefile detritus from drivers/leds/] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-jv5uf34996juqh5syes8mn4h@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-03ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XXKukjin Kim
This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: Felipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: Wim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-29Merge branch 'omap1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'omap1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: input: serio: ams-delta: toggle keyboard power over GPIO omapfb: lcd_ams_delta: drive control lines over GPIO MTD: NAND: ams-delta: use GPIO instead of custom I/O LED: drop leds-ams-delta driver ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio ARM: OMAP1: ams-delta: register latch dependent devices later
2012-02-08drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmaxAxel Lin
In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and pltfm->als_vmax is 0. This does not make sense. I think what we want here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV. Both als_vmin and als_vmax local variables will be set to pltfm->als_vmin and pltfm->als_vmax by a few lines latter. Thus also remove a redundant assignment for als_vmin and als_vmax in this patch. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23leds: add led driver for Bachmann's ot200Sebastian Andrzej Siewior
Add support for leds on Bachmann's ot200 visualisation device. The device has three leds on the back panel (led_err, led_init and led_run) and can handle up to seven leds on the front panel. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. It incorporates feedback from Lars-Peter Clausen [akpm@linux-foundation.org: add dependency on HAS_IOMEM] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-20Merge branch 'omap1-part2' into omap1Tony Lindgren
Conflicts: drivers/leds/leds-ams-delta.c
2012-01-14Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds
Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-10leds: convert wm8350 driver to devm_kzalloc()Mark Brown
Saves a small amount of code and systematically eliminates leaks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10leds: convert wm831x status driver to devm_kzalloc()Mark Brown
Saves a small amount of code and systematically eliminates leaks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 09:44:10 +0000