summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)Author
2018-12-25Merge tag 'leds-for-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "There are several few-liners, where most of them are fixes and improvments. One thing standing out is ground preparation for inititializing trigger parameters via Device Tree. We introduce LED_INIT_DEFAULT_TRIGGER flag for that purpose and set it when default trigger is matched. It indicates that trigger should parse DT properties to retrieve the initialization data when set as default one" * tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag led: triggers: Break the for loop after default trigger is found leds: pwm: Use OF variant of LED registering function leds: pwm: Simplify with resource-managed devm_led_classdev_register() leds: gpio: Drop unneeded manual of_node assignment leds: 88pm860x: Use of_node_name_eq for node name comparisons leds: powernv: add of_node_put()
2018-12-10led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought ↵Krzysztof Kozlowski
after class Trigger driver can be initialized after the LED class device driver. In such case led_trigger_set_default() won't be called and flag LED_INIT_DEFAULT_TRIGGER should be set from led_trigger_register(). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-10led: triggers: Add LED_INIT_DEFAULT_TRIGGER flagJacek Anaszewski
Add the flag LED_INIT_DEFAULT_TRIGGER for indicating that trigger being set is a default trigger for the LED class device, and thus it should be initialized with settings provided in the fwnode. Set the flag in the led_trigger_set_default(). It is expected to be cleared in the activate() op of a trigger after trigger fwnode initialization data is parsed and applied. This should happen only once after LED class device registration, to allow leaving triggers in the idle state on re-apply and let the users apply their own settings without interference from the default ones. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-10led: triggers: Break the for loop after default trigger is foundJacek Anaszewski
It is of no avail to continue iterating through registered triggers in the led_trigger_set_default() after the trigger to set has been found. Add "break" statement to fix this omission. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-08leds: pwm: Use OF variant of LED registering functionKrzysztof Kozlowski
The PWM leds can be instantiated from Device Tree so pass the respective device node to LED core. This provides the LED system with proper device node and exposes it through uevent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08leds: pwm: Simplify with resource-managed devm_led_classdev_register()Krzysztof Kozlowski
Simplify the exit path with resource-managed version of registering LED class device. The code should be functionally the same, except that on device removal the led_pwm_priv->num_leds is not decremented to zero (which should not have any effect as device is going away). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08leds: gpio: Drop unneeded manual of_node assignmentKrzysztof Kozlowski
This reverts the main change of commit bff23714bc36 ("leds: leds-gpio: Set of_node for created LED devices") because of_node assignment is handled by core since commit 7ea79ae86c28 ("leds: gpio: use OF variant of LED registering function"). Basically the code was overwriting the of_node with same value. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-06leds: 88pm860x: Use of_node_name_eq for node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: linux-leds@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-11-28leds: trigger: Introduce audio mute LED triggerTakashi Iwai
This patch adds a new LED trigger for coupling the audio mixer change with the LED on laptops or other devices. Currently there are two trigger types, "audio-mute" and "audio-micmute". The audio driver triggers the LED brightness change via ledtrig_audio_set() call with the proper type (either mute or mic-mute). OTOH, the consumers may call ledtrig_audio_get() for the initial brightness value that may have been set by the audio driver beforehand. This new stuff will be used by HD-audio codec driver and some platform drivers (thinkpad_acpi and dell-laptop, also upcoming huawei-wmi). Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-21leds: powernv: add of_node_put()Yangtao Li
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. powernv_led_probe() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-11-08Merge tag 'led-fixes-for-4.20-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: "All three fixes are related to the newly added pattern trigger: - remove mutex_lock() from timer callback, which would trigger problems related to sleeping in atomic context, the removal is harmless since mutex protection turned out to be redundant in this case - fix pattern parsing to properly handle intervals with brightness == 0 - fix typos in the ABI documentation" * tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: Documentation: ABI: led-trigger-pattern: Fix typos leds: trigger: Fix sleeping function called from invalid context Fix pattern handling optimalization
2018-11-07leds: trigger: Fix sleeping function called from invalid contextBaolin Wang
We will meet below issue due to mutex_lock() is called in interrupt context. The mutex lock is used to protect the pattern trigger data, but before changing new pattern trigger data (pattern values or repeat value) by users, we always cancel the timer firstly to clear previous patterns' performance. That means there is no race in pattern_trig_timer_function(), so we can drop the mutex lock in pattern_trig_timer_function() to avoid this issue. Moreover we can move the timer cancelling into mutex protection, since there is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function(). BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) [<c020f19c>] (unwind_backtrace) from [<c020aecc>] (show_stack+0x10/0x14) [<c020aecc>] (show_stack) from [<c07affb8>] (dump_stack+0x7c/0x9c) [<c07affb8>] (dump_stack) from [<c02417d4>] (___might_sleep+0xf4/0x158) [<c02417d4>] (___might_sleep) from [<c07c92c4>] (mutex_lock+0x18/0x60) [<c07c92c4>] (mutex_lock) from [<c067b28c>] (pattern_trig_timer_function+0x1c/0x11c) [<c067b28c>] (pattern_trig_timer_function) from [<c027f6fc>] (call_timer_fn+0x1c/0x90) [<c027f6fc>] (call_timer_fn) from [<c027f944>] (expire_timers+0x94/0xa4) [<c027f944>] (expire_timers) from [<c027fc98>] (run_timer_softirq+0x108/0x15c) [<c027fc98>] (run_timer_softirq) from [<c02021cc>] (__do_softirq+0x1d4/0x258) [<c02021cc>] (__do_softirq) from [<c0224d24>] (irq_exit+0x64/0xc4) [<c0224d24>] (irq_exit) from [<c0268dd0>] (__handle_domain_irq+0x80/0xb4) [<c0268dd0>] (__handle_domain_irq) from [<c045e1b0>] (gic_handle_irq+0x58/0x90) [<c045e1b0>] (gic_handle_irq) from [<c02019f8>] (__irq_svc+0x58/0x74) Exception stack(0xeb483f60 to 0xeb483fa8) 3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408 3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98 3fa0: 60020013 ffffffff [<c02019f8>] (__irq_svc) from [<c0207e98>] (arch_cpu_idle+0x1c/0x38) [<c0207e98>] (arch_cpu_idle) from [<c0247ca8>] (do_idle+0x138/0x268) [<c0247ca8>] (do_idle) from [<c0248050>] (cpu_startup_entry+0x18/0x1c) [<c0248050>] (cpu_startup_entry) from [<402022ec>] (0x402022ec) Fixes: 5fd752b6b3a2 ("leds: core: Introduce LED pattern trigger") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-26leds: gpio: set led_dat->gpiod pointer for OF defined GPIO ledsLiviu Dudau
Commit 45d4c6de4e49 ("leds: gpio: Try to lookup gpiod from device") removed the common code path that set the led_dat->gpiod pointer in create_gpio_led(), but only added it back for the devices that have a valid gpio_led_platform_data structure. Calling gpio_leds_create() in gpio_led_probe() is not enough to get a valid gpiod pointer. Fortunately enough, gpio_leds_create() already gets the needed pointer, we just need to assign it to the relevant gpio_led_data structure. Fixes: 45d4c6de4e49 ("leds: gpio: Try to lookup gpiod from device") Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-25Fix pattern handling optimalizationPavel Machek
Check for zero duration before skipping step. This fixes pattern echo "0 1000 10 2550 0 1000" > pattern which should do [ .-xXx-.] but does [ Xx-.] Signed-off-by: Pavel Machek <pavel@ucw.cz> Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11leds: sc27xx: Add pattern_set/clear interfaces for LED controllerBaolin Wang
This patch implements the 'pattern_set'and 'pattern_clear' interfaces to support SC27XX LED breathing mode. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.c> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11leds: core: Introduce LED pattern triggerBaolin Wang
This patch adds a new LED trigger that LED device can configure to employ software or hardware pattern engine. Consumers can write 'pattern' file to enable the software pattern which alters the brightness for the specified duration with one software timer. Moreover consumers can write 'hw_pattern' file to enable the hardware pattern for some LED controllers which can autonomously control brightness over time, according to some preprogrammed hardware patterns. Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10leds: add Panasonic AN30259A supportSimon Shields
AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10leds: gpio: Try to lookup gpiod from deviceLinus Walleij
This augments the GPIO lookup code in the GPIO LEDs to attempt to look up a GPIO descriptor from the device with index. This makes it possible to use GPIO machine look-up tables and stop passing global GPIO numbers through platform data. Using this we can stepwise convert existing board files to use machine descriptor tables and then eventually drop the legacy GPIO support and only include <linux/gpio/consumer.h> and use descriptors exclusively. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-08leds: pwm: silently error out on EPROBE_DEFERJerome Brunet
When probing, if we fail to get the pwm due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-08-28leds: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-leds@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-08-06leds: ns2: Change unsigned to unsigned intKitone Elvis Peter
Use unsigned int, because it's preferred to unsigned. Signed-off-by: Kitone Elvis Peter <elviskitone@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: gpio trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and to handle device attributes. Also make use of the module_led_trigger() helper to simplify trigger registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: backlight trigger: simplifications from core changesUwe Kleine-König
Use the new module_led_trigger() helper. Also use attribute support from the trigger core. Drop error message on allocation failure as kzalloc() already screams loudly when failing. Use wrappers to get and set trigger data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: activity trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and the accessor function to get and set trigger_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: default-on trigger: make use of module_led_trigger()Uwe Kleine-König
This removes some boilerplate from the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: heartbeat trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and the accessor function to get and set trigger_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: oneshot trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away in .deactivate(). Also make use of module_led_trigger() and do some minor coding style improvements. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: transient trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .activated can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: timer trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for .trigger_data being non-NULL can go away. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: netdev trigger: simplifications from core changesUwe Kleine-König
The trigger core learned error handling for the activate callback and can handle device attributes now. This allows simplifying the driver considerably. Note that .deactivate() is only called when .activate() succeeded, so the check for trigger_data being non-NULL can go away. (It was broken before because the core didn't clear .trigger_data, so it might have been non-NULL even if .activate() failed before.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: handle .trigger_data and .activated() in the coreUwe Kleine-König
This helps keeping these two fields consistent and drivers don't need to care for this themselves any more. Note that .activated isn't set to true automatically because that might confuse some triggers when deactivating (e.g. ledtrig-gpio). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: add device attribute supportUwe Kleine-König
As many triggers use device attributes, add support for these in led_trigger_set which allows simplifying the drivers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König
Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: make the MODULE_LICENSE string match the actual licenseUwe Kleine-König
These files are licensed under GPL version 2 only. So use "GPL v2" instead of "GPL" (which means v2 or later). Also remove an empty (but commented) line at the end of the license header which nicely proves in the context that the drivers are really v2 only :-) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lm3692x: Support LED sync configurationDan Murphy
The LM36922 has one output but can sync current to 2 LED strings. The user may only use one sync so the other syncs need to be disabled. The LM36923 has 3 LED syncs. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lm3692x: Change DT calls to fwnode callsDan Murphy
Update the code to use the fwnode calls as opposed to ARM DT node api's. This allows the device to be used with either DT configurations or ACPI definitions. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lm3692x: Update license header to SPDXDan Murphy
Update the license header to the current SPDX licensing format. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: max8997: use mode when calling max8997_led_set_modeColin Ian King
Variable mode is assigned to pdata->led_pdata->mode[led->id] and yet is not being used when calling function max8997_led_set_mode. Fix this by using mode when calling max8997_led_set_mode. Cleans up clang warning: warning: variable 'mode' set but not used [-Wunused-but-set-variable] Fixes: 8584cb82f151 ("leds: Add suuport for MAX8997-LED driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lt3593: update email address and switch to SPDX license headerDaniel Mack
Update the email address in the module information and in the comments and in the module information, and drop the existing boilerplate in favor of a SPDX header. Also sync the module license information with the header. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lt3593: Add device tree probing glueDaniel Mack
The binding details are described in an earlier commit that adds the documentation. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lt3593: switch to gpiod interfaceDaniel Mack
Clean up the code a bit and transition over to the gpiod based interface. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03leds: lt3593: merge functions and clean up codeDaniel Mack
In preparation to DT probe functionality, merge create_lt3593_led() into its only call-site. The DT based setup code will be quite different, so this internal helper function is of no help. This also changes the way the driver works by only handling one entry inside 'struct gpio_led_platform_data'. If multiple devices of the same type are found in a design, there should be a platform device for each of them. The only mainline user of this driver is not affected by this change. Last, use devm_led_classdev_register() instead of led_classdev_register(), so the driver's remove callback can go away. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-28leds: triggers: don't depend on LEDS_TRIGGERS twiceUwe Kleine-König
All the triggers are defined in a big if LEDS_TRIGGERS...endif block. So there is no need to let each driver depend on LEDS_TRIGGERS explicitly once more. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-28leds: Modify PC Engines apu/apu2 driver to support apu3Raffaello D. Di Napoli
PC Engines apu3 is an improved version of the apu2, using the same SoC and almost everything else. This patch reuses as much as possible from the apu2 definitions, to avoid redundancy. Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-19leds: ledtrig-activity: use ktime_get_boot_ns()Arnd Bergmann
get_monotonic_boottime() is deprecated, so let's convert this to the simpler ktime_get_boot_ns(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12leds: Use struct_size() in allocationKees Cook
This case got missed by the earlier treewide struct_size() conversions. Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24leds: class: ensure workqueue is initialized before setting brightnessLuis Henriques
An application can try to set brightness before all the initialization is done, in particular before the workqueue is initialized with the call to led_init_core(). Here's a WARNING easy to trigger: [ 36.780813] WARNING: CPU: 3 PID: 1411 at ../kernel/workqueue.c:1444 __queue_work+0x37b/0x420 [ 36.780815] Modules linked in: ... [ 36.780868] CPU: 3 PID: 1411 Comm: systemd-backlig Not tainted 4.16.9-1-default #1 openSUSE Tumbleweed (unreleased) [ 36.780868] Hardware name: Dell Inc. Precision 5510/0N8J4R, BIOS 1.6.1 12/11/2017 [ 36.780870] RIP: 0010:__queue_work+0x37b/0x420 [ 36.780871] RSP: 0018:ffffaced048b7d78 EFLAGS: 00010086 [ 36.780873] RAX: 0000000000000000 RBX: ffffffffb3f01440 RCX: 0000000000000000 [ 36.780873] RDX: ffffffffc05a90d8 RSI: 0000000000000000 RDI: ffff8eac7dce2700 [ 36.780874] RBP: ffff8ea547c16400 R08: ffff8ea547800000 R09: ffff8eac7dc22700 [ 36.780875] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000003 [ 36.780876] R13: 0000000000000200 R14: ffffffffc05a90d0 R15: ffff8eac7dce8600 [ 36.780877] FS: 00007f871e61cf40(0000) GS:ffff8eac7dcc0000(0000) knlGS:0000000000000000 [ 36.780878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.780879] CR2: 000055c91115e308 CR3: 0000000883ee0005 CR4: 00000000003606e0 [ 36.780880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 36.780880] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 36.780881] Call Trace: [ 36.780886] queue_work_on+0x81/0x90 [ 36.780889] brightness_store+0x5d/0x90 [ 36.780892] kernfs_fop_write+0x105/0x180 [ 36.780894] __vfs_write+0x26/0x150 [ 36.780897] ? common_file_perm+0x51/0x150 [ 36.780900] ? security_file_permission+0x3c/0xb0 [ 36.780901] vfs_write+0xad/0x1a0 [ 36.780903] SyS_write+0x42/0x90 [ 36.780906] do_syscall_64+0x76/0x140 [ 36.780908] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 36.780910] RIP: 0033:0x7f871dd04c94 [ 36.780910] RSP: 002b:00007ffeb3a57d38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 36.780912] RAX: ffffffffffffffda RBX: 000055c91115c810 RCX: 00007f871dd04c94 [ 36.780912] RDX: 0000000000000001 RSI: 000055c91115c810 RDI: 0000000000000004 [ 36.780913] RBP: 00007ffeb3a57e10 R08: 0000000000000003 R09: 0000000000000000 [ 36.780914] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [ 36.780914] R13: 000055c911158f30 R14: 000055c90f3a9a4e R15: 0000000000000004 [ 36.780917] Code: 74 18 e8 49 80 00 00 48 85 c0 74 0e 48 8b 40 20 48 3b 68 08 0f 84 c2 fc ff ff 0f 0b 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b e9 82 fd ff ff 83 cd 02 49 8d 57 60 e9 69 fd ff ff 80 3d [ 36.780942] ---[ end trace 1fce4edad54c4017 ]--- This patch initializes and acquires the led_access mutex early in the of_led_classdev_register function, so that any application trying to write to sysfs to set brightness will block until initialization ends. Signed-off-by: Luis Henriques <lhenriques@suse.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-23leds: lm3601x: Introduce the lm3601x LED driverDan Murphy
Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-22leds: sc27xx: Fix return value check in sc27xx_led_probe()Wei Yongjun
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e081c49e30ec ("leds: Add Spreadtrum SC27xx breathing light controller driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 17:05:26 +0000