summaryrefslogtreecommitdiff
path: root/drivers/leds/leds-pca955x.c
AgeCommit message (Collapse)Author
2020-08-17leds: pca955x: Add an IBM software implementation of the PCA9552 chipEddie James
IBM created an implementation of the PCA9552 on a PIC16F microcontroller. The I2C device addresses are different from the hardware PCA9552, so add a new compatible string and associated platform data to be able to probe this device. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-12leds: pca955x: Include the right GPIO headerLinus Walleij
This driver provides a GPIO chip, so include <linux/gpio/driver.h> and not the legacy <linux/gpio.h> header. Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Matt Spinler <mspinler@linux.vnet.ibm.com> Cc: Cédric Le Goater <clg@kaod.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-07-09Merge tag 'leds-for-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
2019-06-09leds: leds-pca955x: simplify getting the adapter of a clientWolfram Sang
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-31leds: pca955x: Make use of device property APIAndy Shevchenko
Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-31leds: pca955x: Revert "Add ACPI support"Andy Shevchenko
There is no evidence of officially registered ACPI IDs for these devices. Thus, revert commit 44b3e31d540e917a4d2292b902ade63fa1748d9a. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-06leds: pca955x: Don't invert requested value in pca955x_gpio_set_value()Andrew Jeffery
The PCA9552 lines can be used either for driving LEDs or as GPIOs. The manual states that for LEDs, the operation is open-drain: The LSn LED select registers determine the source of the LED data. 00 = output is set LOW (LED on) 01 = output is set high-impedance (LED off; default) 10 = output blinks at PWM0 rate 11 = output blinks at PWM1 rate For GPIOs it suggests a pull-up so that the open-case drives the line high: For use as output, connect external pull-up resistor to the pin and size it according to the DC recommended operating characteristics. LED output pin is HIGH when the output is programmed as high-impedance, and LOW when the output is programmed LOW through the ‘LED selector’ register. The output can be pulse-width controlled when PWM0 or PWM1 are used. Now, I have a hardware design that uses the LED controller to control LEDs. However, for $reasons, we're using the leds-gpio driver to drive the them. The reasons are here are a tangent but lead to the discovery of the inversion, which manifested as the LEDs being set to full brightness at boot when we expected them to be off. As we're driving the LEDs through leds-gpio, this means wending our way through the gpiochip abstractions. So with that in mind we need to describe an active-low GPIO configuration to drive the LEDs as though they were GPIOs. The set() gpiochip callback in leds-pca955x does the following: ... if (val) pca955x_led_set(&led->led_cdev, LED_FULL); else pca955x_led_set(&led->led_cdev, LED_OFF); ... Where LED_FULL = 255. pca955x_led_set() in turn does: ... switch (value) { case LED_FULL: ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_ON); break; ... Where PCA955X_LS_LED_ON is defined as: #define PCA955X_LS_LED_ON 0x0 /* Output LOW */ So here we have some type confusion: We've crossed domains from GPIO behaviour to LED behaviour without accounting for possible inversions in the process. Stepping back to leds-gpio for a moment, during probe() we call create_gpio_led(), which eventually executes: if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { state = gpiod_get_value_cansleep(led_dat->gpiod); if (state < 0) return state; } else { state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); } ... ret = gpiod_direction_output(led_dat->gpiod, state); In the devicetree the GPIO is annotated as active-low, and gpiod_get_value_cansleep() handles this for us: int gpiod_get_value_cansleep(const struct gpio_desc *desc) { int value; might_sleep_if(extra_checks); VALIDATE_DESC(desc); value = _gpiod_get_raw_value(desc); if (value < 0) return value; if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; return value; } _gpiod_get_raw_value() in turn calls through the get() callback for the gpiochip implementation, so returning to our get() implementation in leds-pca955x we find we extract the raw value from hardware: static int pca955x_gpio_get_value(struct gpio_chip *gc, unsigned int offset) { struct pca955x *pca955x = gpiochip_get_data(gc); struct pca955x_led *led = &pca955x->leds[offset]; u8 reg = pca955x_read_input(pca955x->client, led->led_num / 8); return !!(reg & (1 << (led->led_num % 8))); } This behaviour is not symmetric with that of set(), where the val is inverted by the driver. Closing the loop on the GPIO_ACTIVE_LOW inversions, gpiod_direction_output(), like gpiod_get_value_cansleep(), handles it for us: int gpiod_direction_output(struct gpio_desc *desc, int value) { VALIDATE_DESC(desc); if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; else value = !!value; return _gpiod_direction_output_raw(desc, value); } All-in-all, with a value of 'keep' for default-state property in a leds-gpio child node, the current state of the hardware will in-fact be inverted; precisely the opposite of what was intended. Rework leds-pca955x so that we avoid the incorrect inversion and clarify the semantics with respect to GPIO. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Matt Spinler <mspinler@linux.vnet.ibm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-30leds: pca955x: check for I2C errorsCédric Le Goater
This should also allow probing to fail when a pca955x chip is not found on a I2C bus. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-29leds: pca955x: Prevent crippled LED device nameJacek Anaszewski
In case platform data provided empty LED name string the resulting LED class device name would be crippled. Use corresponding LED chip bit in place of "function" segment of LED class device name then to make the LEDs at least distinguishable. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Reported-by: Colin King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Nate Case <ncase@xes-inc.com>
2017-08-14leds: pca955x: add GPIO supportCédric Le Goater
The PCA955x family of chips are I2C LED blinkers whose pins not used to control LEDs can be used as general purpose I/Os (GPIOs). The following adds such a support by defining different operation modes for the pins (See bindings documentation for more details). The pca955x driver is then extended with a gpio_chip when some of pins are operating as GPIOs. The default operating mode is to behave as a LED. The GPIO support is conditioned by CONFIG_LEDS_PCA955X_GPIO. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-14leds: pca955x: use devm_led_classdev_registerCédric Le Goater
This lets us remove the loop doing the cleanup in case of failure and also the remove handler of the i2c_driver. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-14leds: pca955x: add device tree supportCédric Le Goater
It will be used in a following patch to define different operation modes for each pin. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-22leds: pca955x: Correct I2C FunctionalityTin Huynh
The driver checks an incorrect flag of functionality of adapter. When a driver requires i2c_smbus_read_byte_data and i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA instead I2C_FUNC_I2C. This patch fixes the problem. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2016-12-02leds: pca955x: Add ACPI supportTin Huynh
This patch enables ACPI support for leds-pca955x driver. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04leds: pca955x: Remove work queueAndrew Lunn
Now the core implements the work queue, remove it from the drivers, and switch to using brightness_set_blocking op. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-08-28leds: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2013-08-26leds: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-12-15Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (47 commits) leds: leds-lp5521: return an error code on error in probe() leds: leds-clevo-mail: Use pr_* instead of printks leds: leds-rb532: Fix checkpatch errors leds: led-triggers: Fix checkpatch warnings leds: ledtrig-backlight: Fix checkpatch error leds: leds-wrap: Use <linux/io.h> instead of <asm/io.h> leds: leds-wm8350: Use dev_err instead of printk leds: leds-pwm: Fix checkpatch warning leds: leds-pca955x: Use dev_info instead of printk leds: leds-net48xx: Use linux/io.h instead of asm/io.h leds: leds-lt3593: Fix checkpatch warnings leds: leds-gpio: Use dev_info instead of printk leds: leds-da903x: Fix checkpatch error and warnings leds: leds-bd2802: Fix checkpatch warnings leds: leds-adp5520: Fix checkpatch warnings leds: led-class: Fix checkpatch warning leds: leds-ns2: use devm_gpio_request_one leds: leds-lt3593: use devm_gpio_request_one leds: leds-gpio: use devm_gpio_request_one leds: lp3944: Fix return value ...
2012-11-28leds: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28leds: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28leds: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27leds: leds-pca955x: Use dev_info instead of printkSachin Kamat
Fixes the following checkpatch warning: WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-07-24leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit pathBryan Wu
Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-05-29drivers/leds/leds-pca955x.c: fix race condition while setting brightness on ↵Alexander Stein
several LEDs When issuing the following command: for I in 0 1 2 3 4 5 6 7; do echo 0 > /sys/class/leds/pca955x\:${I}/brightness; done It is possible that all the pca955x_read_ls calls are done sequentially before any pca955x_write_ls call is done. This updates the LS only to the last LED update in its set. Fix this by using a global lock for the pca995x device during pca955x_led_work. Also used a struct for shared data betreen all LEDs. [akpm@linux-foundation.org: revert unintentional rename of pca955x_ledsel()] Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10leds: convert led i2c drivers to module_i2c_driverAxel Lin
Factor out some boilerplate code for i2c driver registration into module_i2c_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <hzhuang1@marvell.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Michael Hennerich <hennerich@blackfin.uclinux.org> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-03i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2008-10-20leds: leds-pca955x - Mark pca955x_led_set() staticSven Wegener
Mark pca955x_led_set() as static Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-03leds-pca955x: add proper error handling and fix bogus memory handlingSven Wegener
Check the return value of led_classdev_register and unregister all registered devices, if registering one device fails. Also the dynamic memory handling is totally bogus. You can't allocate multiple chunks via kzalloc() and expect them to be in order later. I wonder how this ever worked. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Nate Case <ncase@xes-inc.com> Tested-by: Nate Case <ncase@xes-inc.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23leds: Add support for Philips PCA955x I2C LED driversNate Case
This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553 LED driver chips. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>