summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-stm32-exti.c
AgeCommit message (Collapse)Author
2021-06-10irqchip: Bulk conversion to generic_handle_domain_irq()Marc Zyngier
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-05-16irqchip: Remove redundant error printingZhen Lei
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210511125428.6108-2-thunder.leizhen@huawei.com
2021-04-07irqchip/stm32: Add usart instances exti direct event supportErwan Le Ray
Add following usart instances exti direct event support (used for UART wake up). - exti 26 (USART1) is mapped to GIC 37 - exti 27 (USART2) is mapped to GIC 38 - exti 28 (USART3) is mapped to GIC 39 - exti 29 (USART6) is mapped to GIC 71 - exti 31 (UART5) is mapped to GIC 53 - exti 32 (UART7) is mapped to GIC 82 - exti 33 (UART8) is mapped to GIC 83 Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210319184253.5841-4-erwan.leray@foss.st.com
2020-10-25irqchip/stm32-exti: Add all LP timer exti direct events supportFabrice Gasnier
Add all remaining LP timer exti direct events, e.g. for LP Timer 2 to 5. LP timer 1 is already listed (e.g. exti 47). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1602859219-15684-2-git-send-email-fabrice.gasnier@st.com
2020-08-25irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by ↵qiuguorui1
mistake In the current code, when the eoi callback of the exti clears the pending bit of the current interrupt, it will first read the values of fpr and rpr, then logically OR the corresponding bit of the interrupt number, and finally write back to fpr and rpr. We found through experiments that if two exti interrupts, we call them int1/int2, arrive almost at the same time. in our scenario, the time difference is 30 microseconds, assuming int1 is triggered first. there will be an extreme scenario: both int's pending bit are set to 1, the irq handle of int1 is executed first, and eoi handle is then executed, at this moment, all pending bits are cleared, but the int 2 has not finally been reported to the cpu yet, which eventually lost int2. According to stm32's TRM description about rpr and fpr: Writing a 1 to this bit will trigger a rising edge event on event x, Writing 0 has no effect. Therefore, when clearing the pending bit, we only need to clear the pending bit of the irq. Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com
2020-07-27irqchip/stm32-exti: Map direct event to irq parentAlexandre Torgue
EXTI lines are mainly used to wake-up system from CStop low power mode. Currently, if a device wants to use a EXTI (direct) line as wakeup line, it has to declare 2 interrupts: - one for EXTI used to wake-up system (with dedicated_wake_irq api). - one for GIC used to get the wake up reason inside the concerned IP. This split is not really needed as each EXTI line is actually "linked " to a GIC. So to avoid this useless double interrupt management in each wake-up driver, this patch lets the STM32 EXTI driver abstract it by mapping each EXTI line to his corresponding GIC. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200717140717.29606-1-alexandre.torgue@st.com
2020-07-27irqchip/stm32-exti: Use the hwspin_lock_timeout_in_atomic() APIFabien Dessenne
Now that the hwspin_lock_timeout_in_atomic() API is available use it. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200706081115.25180-1-alexandre.torgue@st.com
2020-03-08irqchip/stm32: Add irq retrigger supportAlexandre Torgue
This commit introduces retrigger support for stm32_ext_h chip. It consists to rise the GIC interrupt mapped to an EXTI line. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20200219143229.18084-2-alexandre.torgue@st.com
2019-04-29irqchip/stm32: Use a platform driver for stm32mp1-exti deviceFabien Dessenne
This irqchip driver uses the hwspinlock framework (coprocessor HW regs access concurrency) for the stm32mp1-exti device. Hence, this driver needs to handle the hwspinlock driver dependency using the deferred probe mechanism which requires to move this driver into a platform one with a probe() ops. This applies only for the device which is "st,stm32mp1-exti" compatible, the management of the other devices (st,stm32h7-exti / st,stm32-exti) is kept unchanged (use IRQCHIP_DECLARE) Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21Merge tag 'irqchip-5.1-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0)
2019-03-21irqchip/stm32: Don't set rising configuration registers at initFabien Dessenne
The rising configuration status register (rtsr) is not banked. As it is shared with the co-processor, it should not be written at probe time, else the co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/stm32: Don't clear rising/falling config registers at initFabien Dessenne
Falling and rising configuration and status registers are not banked. As they are shared with M4 co-processor, they should not be cleared at probe time, else M4 co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-01-17irqchip/stm32-exti: Add domain translate functionLoic Pallardy
Domain translate function is needed to recover irq configuration parameters from DT node Fixes: 927abfc4461e ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18irqchip/stm32: protect configuration registers with hwspinlockBenjamin Gaignard
If a hwspinlock is defined in device tree use it to protect configuration registers. Do not request for hwspinlock during the exti driver init since the hwspinlock driver is not probed yet at that stage and the exti driver does not support deferred probe. Instead of this, postpone the hwspinlock request at the first time the hwspinlock is actually needed. Use the hwspin_trylock_raw() API which is the most appropriated here Indeed: - hwspin_lock_() calls are under spin_lock protection (chip_data->rlock or gc->lock). - the _timeout() API relies on jiffies count which won't work if IRQs are disabled which is the case here (a large part of the IRQ setup is done atomically (see irq/manage.c)) As a consequence implement the retry/timeout lock from here. And since all of this is done atomically, reduce the timeout delay to 1 ms. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-13irqchhip: Convert to using %pOFn instead of device_node.nameYangtao Li
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-08-24Merge tag 'irqchip-4.19-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 4.19, take #2 from Marc Zyngier: - bcm7038: compilation fix for !SMP - stm32: fix teardown on probe error - s3c24xx: fix compilation warning - renesas-irqc: r8a774a1 support - tango: chained irq setup simplification - gic-v3: allow wake-up sources
2018-08-13irqchip/stm32: Fix init error handlingDan Carpenter
If there are any errors in stm32_exti_host_init() then it leads to a NULL dereference in the callers. The function should clean up after itself. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-07-19irqchip/stm32: Add exti0 translation for stm32mp1Ludovic Barre
This patch fixes a datasheet issue, in the draft version the "exti0" was not connected whereas is it. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-06-06irqchip/stm32: Fix non-SMP build warningArnd Bergmann
A CONFIG_SMP=n build emits a harmless compile-time warning: drivers/irqchip/irq-stm32-exti.c:495:12: error: 'stm32_exti_h_set_affinity' defined but not used [-Werror=unused-function] The #ifdef is inconsistent here, and it's better to use an IS_ENABLED() check that lets the compiler silently drop that function. Fixes: 927abfc4461e ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Cc: Rob Herring <robh@kernel.org> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lkml.kernel.org/r/20180605114347.1347128-1-arnd@arndb.de
2018-05-24irqchip/stm32: Add suspend/resume support for hierarchy domainLudovic Barre
This patch adds suspend/resume feature for exti hierarchy domain. -suspend function sets wake_active into imr of each banks -resume function restores the mask_cache interrupt into imr of each banks Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Add stm32mp1 support with hierarchy domainLudovic Barre
Exti controller has been differently integrated on stm32mp1 SoC. A parent irq has only one external interrupt. A hierachy domain could be used. Handlers are call by parent, each parent interrupt could be masked and unmasked according to the needs. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Prepare common functionsLudovic Barre
This patch prepares functions which could be reused by next variant of stm32 exti controller. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Add host and driver data structuresLudovic Barre
This patch adds host and driver data structures to support different stm32 exti controllers with variants. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Add suspend supportLudovic Barre
This patch adds suspend feature. -Use default irq_set_wake function to store wakeup request. -Suspend function set wake_active into imr of each bank and save rising/falling trigger registers. -Resume function restore the mask_cache interrupt into imr of each bank and restore rising/falling trigger registers. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Add falling pending register supportLudovic Barre
This patch adds support of rising/falling pending registers. Falling pending register (fpr) is needed for next revision. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Checkpatch fixLudovic Barre
-WARNING: struct irq_domain_ops should normally be const -CHECK: Alignment should match open parenthesis Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24irqchip/stm32: Optimizes and cleans up stm32-exti irq_domainRadoslaw Pietrzyk
- In stm32_exti_alloc function, discards irq_domain_set_info with handle_simple_irq. This overwrite the setting defined while init of generic chips. Exti controller manages edge irq type. - Removes acking in chained irq handler as this is done by irq_chip itself inside handle_edge_irq - removes unneeded irq_domain_ops.xlate callback Acked-by: Ludovic Barre <ludovic.barre@st.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-01-29irqchip/stm32: Fix copyrightBenjamin Gaignard
Uniformize STMicroelectronics copyrights header and add SPDX identifier CC: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/20171130084500.23439-1-benjamin.gaignard@st.com
2017-11-07irqchip/stm32: Move the wakeup on interrupt maskLudovic Barre
Move irq_set_wake on interrupt mask, needed to wake up from low power mode as the event mask is not able to do so. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Fix initial valuesLudovic Barre
-After cold boot, imr default value depends on hardware configuration. -After hot reboot the registers must be cleared to avoid residue. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Add stm32h7 supportLudovic Barre
stm32h7 has up to 96 inputs (3 banks of 32 inputs max). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Add multi-bank managementLudovic Barre
-Prepare to manage multi-bank of external interrupts (N banks of 32 inputs). -Prepare to manage registers offsets by compatible (registers offsets could be different follow per stm32 platform). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-23irqchip: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Lee Jones <lee@kernel.org> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-tegra@vger.kernel.org Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-21drivers/irqchip: Add STM32 external interrupts supportAlexandre TORGUE
The STM32 external interrupt controller consists of edge detectors that generate interrupts requests or wake-up events. Each line can be independently configured as interrupt or wake-up source, and triggers either on rising, falling or both edges. Each line can also be masked independently. Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:38:46 +0000