summaryrefslogtreecommitdiff
path: root/drivers/irqchip/irq-gic.c
AgeCommit message (Collapse)Author
2019-08-20irqchip/gic: Prepare for more than 16 PPIsMarc Zyngier
GICv3.1 allows up to 80 PPIs (16 legaci PPIs and 64 Extended PPIs), meaning we can't just leave the old 16 hardcoded everywhere. We also need to add the infrastructure to discover the number of PPIs on a per redistributor basis, although we still pretend there is only 16 of them for now. No functional change. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Rework gic_configure_irq to take the full ICFGR baseMarc Zyngier
gic_configure_irq is currently passed the (re)distributor address, to which it applies an a fixed offset to get to the configuration registers. This offset is constant across all GICs, or rather it was until to v3.1... An easy way out is for the individual drivers to pass the base address of the configuration register for the considered interrupt. At the same time, move part of the error handling back to the individual drivers, as things are about to change on that front. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-07irqchip/gic: Register the distributor's PA instead of its VA in fwnodeMarc Zyngier
Do not expose the distributor's VA (it appears in debugfs). Instead, record the PA, which at least can be used to precisely identify the associated irqchip and domain. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04acpi: Create subtable parsing infrastructureKeith Busch
Parsing entries in an ACPI table had assumed a generic header structure. There is no standard ACPI header, though, so less common layouts with different field sizes required custom parsers to go through their subtable entry list. Create the infrastructure for adding different table types so parsing the entries array may be more reused for all ACPI system tables and the common code doesn't need to be duplicated. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-11irqchip/gic: Drop support for secondary GIC in non-DT systemsMarc Zyngier
We do not have any in-tree platform with this pathological setup, and only a single system (Cavium's cns3xxx) isn't DT aware. Let's drop the secondary GIC support for now, until we remove the above horror altogether. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18genirq: Fix various typos in commentsIngo Molnar
Go over the IRQ subsystem source code (including irqchip drivers) and fix common typos in comments. No change in functionality intended. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org
2018-03-28irqchip/gic: Update supports_deactivate static key to modern apiDavidlohr Bueso
No changes in semantics -- key init is true; replace static_key_slow_dec with static_branch_disable static_key_true with static_branch_likely The first is because we never actually do any couterpart incs, thus there is really no reference counting semantics going on. Use the more proper static_branch_disable() construct. Also added a '_key' suffix to supports_deactivate, for better self documentation. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-16irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONEMarc Zyngier
There is a huge number of broken device trees out there. Just grepping through the tree for the use of IRQ_TYPE_NONE in conjunction with the GIC is scary. People just don't realise that IRQ_TYPE_NONE just doesn't exist, and you just get whatever junk was there before. So let's make them aware of the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14irqchip/gic-v2: Reset APRn registers at boot timeMarc Zyngier
Booting a crash kernel while in an interrupt handler is likely to leave the Active Priority Registers with some state that is not relevant to the new kernel, and is likely to lead to erratic behaviours such as interrupts not firing as their priority is already active. As a sanity measure, wipe the APRs clean on startup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-16Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-06KVM: arm/arm64: Check that system supports split eoi/deactivateChristoffer Dall
Some systems without proper firmware and/or hardware description data don't support the split EOI and deactivate operation. On such systems, we cannot leave the physical interrupt active after the timer handler on the host has run, so we cannot support KVM with an in-kernel GIC with the timer changes we are about to introduce. This patch makes sure that trying to initialize the KVM GIC code will fail on such systems. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-02irqchip/gic: Deal with broken firmware exposing only 4kB of GICv2 CPU interfaceMarc Zyngier
There is a lot of broken firmware out there that don't really expose the information the kernel requires when it comes with dealing with GICv2: (1) Firmware that only describes the first 4kB of GICv2 (2) Firmware that describe 128kB of CPU interface, while the usable portion of the address space is between 60 and 68kB So far, we only deal with (2). But we have platforms exhibiting behaviour (1), resulting in two sub-cases: (a) The GIC is occupying 8kB, as required by the GICv2 architecture (b) It is actually spread 128kB, and this is likely to be a version of (2) This patch tries to work around both (a) and (b) by poking at the outside of the described memory region, and try to work out what is actually there. This is of course unsafe, and should only be enabled if there is no way to otherwise fix the DT provided by the firmware (we provide a "irqchip.gicv2_force_probe" option to that effect). Note that for the time being, we restrict ourselves to GICv2 implementations provided by ARM, since there I have no knowledge of an alternative implementations. This could be relaxed if such an implementation comes to light on a broken platform. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt subsystem delivers this time: - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support - Initial GIC-V4 support - Consolidation of the FSL MSI support - Utilize the effective affinity interface in various ARM irqchip drivers - Yet another interrupt chip driver (UniPhier AIDET) - Bulk conversion of the irq chip driver to use %pOF - The usual small fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) irqchip/ls-scfg-msi: Add MSI affinity support irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support irqchip/ls-scfg-msi: Add LS1046a MSI support arm64: dts: ls1046a: Add MSI dts node arm64: dts: ls1043a: Share all MSIs arm: dts: ls1021a: Share all MSIs arm64: dts: ls1043a: Fix typo of MSI compatible string arm: dts: ls1021a: Fix typo of MSI compatible string irqchip/ls-scfg-msi: Fix typo of MSI compatible strings irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask irqchip/mmp: Make mmp_intc_conf const irqchip/gic: Make irq_chip const irqchip/gic-v3: Advertise GICv4 support to KVM irqchip/gic-v4: Enable low-level GICv4 operations irqchip/gic-v4: Add some basic documentation irqchip/gic-v4: Add VLPI configuration interface irqchip/gic-v4: Add VPE command interface irqchip/gic-v4: Add per-VM VPE domain creation irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared ...
2017-08-31Merge tag 'irqchip-4.14' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.14 from Marc Zyngier: - irqchip-specific part of the monster GICv4 series - new UniPhier AIDET irqchip driver - new variants of some Freescale MSI widget - blanket removal of of_node->full_name in printk - random collection of fixes
2017-08-31irqchip/gic: Make irq_chip constBhumika Goyal
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-18irqchip/gic: Report that effective affinity is a single targetMarc Zyngier
The GIC driver only targets a single CPU at a time, even if the notional affinity is wider. Let's inform the core code about this. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Chris Zankel <chris@zankel.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20170818083925.10108-4-marc.zyngier@arm.com
2017-08-02irqchip/gic: Ensure we have an ISB between ack and ->handle_irqWill Deacon
Devices that expose their interrupt status registers via system registers (e.g. Statistical profiling, CPU PMU, DynamIQ PMU, arch timer, vgic (although unused by Linux), ...) rely on a context synchronising operation on the CPU to ensure that the updated status register is visible to the CPU when handling the interrupt. This usually happens as a result of taking the IRQ exception in the first place, but there are two race scenarios where this isn't the case. For example, let's say we have two peripherals (X and Y), where Y uses a system register for its interrupt status. Case 1: 1. CPU takes an IRQ exception as a result of X raising an interrupt 2. Y then raises its interrupt line, but the update to its system register is not yet visible to the CPU 3. The GIC decides to expose Y's interrupt number first in the Ack register 4. The CPU runs the IRQ handler for Y, but the status register is stale Case 2: 1. CPU takes an IRQ exception as a result of X raising an interrupt 2. CPU reads the interrupt number for X from the Ack register and runs its IRQ handler 3. Y raises its interrupt line and the Ack register is updated, but again, the update to its system register is not yet visible to the CPU. 4. Since the GIC drivers poll the Ack register, we read Y's interrupt number and run its handler without a context synchronisation operation, therefore seeing the stale register value. In either case, we run the risk of missing an IRQ. This patch solves the problem by ensuring that we execute an ISB in the GIC drivers prior to invoking the interrupt handler. This is already the case for GICv3 and EOIMode 1 (the usual case for the host). Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-07-04irqchip/gic-v2: Report failures in gic_irq_domain_allocSuzuki K Poulose
If the GIC cannot map an IRQ via irq_domain_ops->alloc(), it doesn't return an error code. This can cause a problem with drivers, where it thinks it has successfully got an IRQ for the device, but requesting the same ends up failure with -ENOSYS (as the IRQ's chip is not set). Fixes: commit 9a1091ef0017c ("irqchip: gic: Support hierarchy irq domain.") Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-20irqchip/gic: Add missing \n to CPU IF adjustment messageMarc Zyngier
It really looks bad without a newline. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic: Mark gic_init_physaddr() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/irqchip/irq-gic.c:917:13: warning: no previous prototype for 'gic_init_physaddr' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic: Make locking a BL_SWITCHER only featureMarc Zyngier
The BL switcher code manipulates the logical/physical CPU mapping, forcing a lock to be taken on the IPI path. With an IPI heavy load, this single lock becomes contended. But when CONFIG_BL_SWITCHER is not enabled, there is no reason to take this lock at all since the CPU mapping is immutable. This patch allows the lock to be entierely removed when BL_SWITCHER is not enabled (which is the case in most configurations), leading to a small improvement of "perf bench sched pipe" (measured on an 8 core AMD Seattle system): Before: 101370 ops/sec After: 103680 ops/sec Take this opportunity to remove a useless lock being taken when handling an interrupt on a secondary GIC. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-17irqchip/gic: Allow self-SGIs for SMP on UP configurationsMarc Zyngier
On systems where a single CPU is present, the GIC may not support having SGIs delivered to a target list. In that case, we use the self-SGI mechanism to allow the interrupt to be delivered locally. Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-14irqchip/gic: Convert to hotplug state machineRichard Cochran
More or less straightforward, although this driver sports some very interesting SMP setup code. Regarding the callback ordering, this deleted comment is interesting: ... the GIC needs to be up before the ARM generic timers. That comment is half baken as the same requirement is true for perf. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153333.069777215@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-13irqchip/gic: Add platform driver for non-root GICs that require RPMJon Hunter
Add a platform driver to support non-root GICs that require runtime power-management. Currently, only non-root GICs are supported because the functions, smp_cross_call() and set_handle_irq(), that need to be called for a root controller are located in the __init section and so cannot be called by the platform driver. The GIC platform driver re-uses many functions from the existing GIC driver including some functions to save and restore the GIC context during power transitions. The functions for saving and restoring the GIC context are currently only defined if CONFIG_CPU_PM is enabled and to ensure that these functions are always defined when the platform driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the platform driver) has been added. In order to re-use the private GIC initialisation code, a new public function, gic_of_init_child(), has been added which calls various private functions to initialise the GIC. This is different from the existing gic_of_init() because it only supports non-root GICs (ie. does not call smp_cross_call() is set_handle_irq()) and is not located in the __init section (so can be used by platform drivers). Furthermore, gic_of_init_child() dynamically allocates memory for the GIC chip data which is also different from gic_of_init(). There is no specific suspend handling for GICs registered as platform devices. Non-wakeup interrupts will be disabled by the kernel during late suspend, however, this alone will not power down the GIC if interrupts have been requested and not freed. Therefore, requestors of non-wakeup interrupts will need to free them on entering suspend in order to power-down the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gic: Prepare for adding platform driverJon Hunter
To support GICs that require runtime power management, it is necessary to add a platform driver, so that the probing of the chip can be deferred if resources, such as a power-domain, is not yet available. To prepare for adding a platform driver: 1. Drop the __init section from the gic_dist_config() so this can be re-used by the platform driver. 2. Add prototypes for functions required by the platform driver to the GIC header file so they can be re-used. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gic: Add helper function for chip initialisationJon Hunter
For GICs that require runtime power-management it is necessary to populate the 'parent_device' member of the irqchip structure. In preparation for supporting such GICs, move the code that initialises the irqchip structure for a GIC into its own function called gic_init_chip() where the parent device pointer is also set. Instead of calling gic_init_chip() from within gic_init_bases(), move the calls to outside of this function, so that in the future we can avoid having to pass additional parameters to gic_init_bases() in order set the parent device pointer or set the name to a specific string. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gic: Isolate early GIC initialisation codeJon Hunter
To re-use the code that initialises the GIC (found in __gic_init_bases()), from within a platform driver, it is necessary to move the code from the __init section so that it is always present and not removed. Unfortunately, it is not possible to simply drop the __init from the function declaration for __gic_init_bases() because it contains calls to set_smp_cross_call() and set_handle_irq() which are both located in the __init section. Fortunately, these calls are only required for the root controller and because the initial platform driver will only support non-root controllers that can be initialised later in the boot process, we can move these calls to another function. Move the bulk of the code from __gic_init_bases() to a new function called gic_init_bases() which is not located in the __init section and can be used by the platform driver. Update __gic_init_bases() to call gic_init_bases() and if necessary, set_smp_cross_call() and set_handle_irq(). Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "Small release overall. x86: - miscellaneous fixes - AVIC support (local APIC virtualization, AMD version) s390: - polling for interrupts after a VCPU goes to halted state is now enabled for s390 - use hardware provided information about facility bits that do not need any hypervisor activity, and other fixes for cpu models and facilities - improve perf output - floating interrupt controller improvements. MIPS: - miscellaneous fixes PPC: - bugfixes only ARM: - 16K page size support - generic firmware probing layer for timer and GIC Christoffer Dall (KVM-ARM maintainer) says: "There are a few changes in this pull request touching things outside KVM, but they should all carry the necessary acks and it made the merge process much easier to do it this way." though actually the irqchip maintainers' acks didn't make it into the patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer, later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more formally and for documentation purposes')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits) KVM: MTRR: remove MSR 0x2f8 KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same svm: Manage vcpu load/unload when enable AVIC svm: Do not intercept CR8 when enable AVIC svm: Do not expose x2APIC when enable AVIC KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore svm: Add VMEXIT handlers for AVIC svm: Add interrupt injection via AVIC KVM: x86: Detect and Initialize AVIC support svm: Introduce new AVIC VMCB registers KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg KVM: x86: Misc LAPIC changes to expose helper functions KVM: shrink halt polling even more for invalid wakeups KVM: s390: set halt polling to 80 microseconds KVM: halt_polling: provide a way to qualify wakeups during poll KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts kvm: Conditionally register IRQ bypass consumer ...
2016-05-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This update delivers: - Yet another interrupt chip diver (LPC32xx) - Core functions to handle partitioned per-cpu interrupts - Enhancements to the IPI core - Proper handling of irq type configuration - A large set of ARM GIC enhancements - The usual pile of small fixes, cleanups and enhancements" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) irqchip/bcm2836: Use a more generic memory barrier call irqchip/bcm2836: Fix compiler warning on 64-bit build irqchip/bcm2836: Drop smp_set_ops on arm64 builds irqchip/gic: Add helper functions for GIC setup and teardown irqchip/gic: Store GIC configuration parameters irqchip/gic: Pass GIC pointer to save/restore functions irqchip/gic: Return an error if GIC initialisation fails irqchip/gic: Remove static irq_chip definition for eoimode1 irqchip/gic: Don't initialise chip if mapping IO space fails irqchip/gic: WARN if setting the interrupt type for a PPI fails irqchip/gic: Don't unnecessarily write the IRQ configuration irqchip: Mask the non-type/sense bits when translating an IRQ genirq: Ensure IRQ descriptor is valid when setting-up the IRQ irqchip/gic-v3: Configure all interrupts as non-secure Group-1 irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratum irqchip/irq-alpine-msi: Don't use <asm-generic/msi.h> irqchip/mbigen: Checking for IS_ERR() instead of NULL irqchip/gic-v3: Remove inexistant register definition irqchip/gicv3-its: Don't allow devices whose ID is outside range irqchip: Add LPC32xx interrupt controller driver ...
2016-05-11irqchip/gic: Add helper functions for GIC setup and teardownJon Hunter
Move the code that sets-up a GIC via device-tree into it's own function and add a generic function for GIC teardown that can be used for both device-tree and ACPI to unmap the GIC memory. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Store GIC configuration parametersJon Hunter
Store the GIC configuration parameters in the GIC chip data structure. This will allow us to simplify the code by reducing the number of parameters passed between functions. Update the __gic_init_bases() function so that we only need to pass a pointer to the GIC chip data structure and no longer need to pass the GIC index in order to look-up the chip data. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Pass GIC pointer to save/restore functionsJon Hunter
Instead of passing the GIC index to the save/restore functions pass a pointer to the GIC chip data. This will allow these save/restore functions to be re-used by a platform driver where the GIC chip data structure is allocated dynamically and so there is no applicable index for identifying the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Return an error if GIC initialisation failsJon Hunter
If the GIC initialisation fails, then currently we do not return an error or clean-up afterwards. Although for root controllers, this failure may be fatal anyway, for secondary controllers, it may not be fatal and so return an error on failure and clean-up. Update the functions gic_cpu_init() and gic_pm_init() to return an error instead of calling BUG() and perform any necessary clean-up. For non-banked GIC controllers, make sure that we free any memory allocated if we fail to initialise the IRQ domain. Please note that free_percpu() only frees memory if the pointer passed to it is not NULL and so it is unnecessary to check if both pointers are valid or not. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Remove static irq_chip definition for eoimode1Jon Hunter
There are only 3 differences (not including the name) in the definitions of the gic_chip and gic_eoimode1_chip structures. Instead of statically defining the gic_eoimode1_chip structure, remove it and populate the eoimode1 functions dynamically for the appropriate GIC irqchips. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Don't initialise chip if mapping IO space failsJon Hunter
If we fail to map the address space for the GIC distributor or CPU interface, then don't attempt to initialise the chip, just WARN and return. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Ensure ordering between read of INTACK and shared dataWill Deacon
When an IPI is generated by a CPU, the pattern looks roughly like: <write shared data> smp_wmb(); <write to GIC to signal SGI> On the receiving CPU we rely on the fact that, once we've taken the interrupt, then the freshly written shared data must be visible to us. Put another way, the CPU isn't going to speculate taking an interrupt. Unfortunately, this assumption turns out to be broken. Consider that CPUx wants to send an IPI to CPUy, which will cause CPUy to read some shared_data. Before CPUx has done anything, a random peripheral raises an IRQ to the GIC and the IRQ line on CPUy is raised. CPUy then takes the IRQ and starts executing the entry code, heading towards gic_handle_irq. Furthermore, let's assume that a bunch of the previous interrupts handled by CPUy were SGIs, so the branch predictor kicks in and speculates that irqnr will be <16 and we're likely to head into handle_IPI. The prefetcher then grabs a speculative copy of shared_data which contains a stale value. Meanwhile, CPUx gets round to updating shared_data and asking the GIC to send an SGI to CPUy. Internally, the GIC decides that the SGI is more important than the peripheral interrupt (which hasn't yet been ACKed) but doesn't need to do anything to CPUy, because the IRQ line is already raised. CPUy then reads the ACK register on the GIC, sees the SGI value which confirms the branch prediction and we end up with a stale shared_data value. This patch fixes the problem by adding an smp_rmb() to the IPI entry code in gic_handle_irq. As it turns out, the combination of a control dependency and an ISB instruction from the EOI in the GICv3 driver is enough to provide the ordering we need, so we add a comment there justifying the absence of an explicit smp_rmb(). Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-03irqchip/gic-v2: Parse and export virtual GIC informationJulien Grall
For now, the firmware tables are parsed 2 times: once in the GIC drivers, the other timer when initializing the vGIC. It means code duplication and make more tedious to add the support for another firmware table (like ACPI). Introduce a new structure and set of helpers to get/set the virtual GIC information. Also fill up the structure for GICv2. Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03irqchip/gic-v2: Gather ACPI specific data in a single structureJulien Grall
The ACPI code requires to use global variables in order to collect information from the tables. For now, a single global variable is used, but more will be added in a subsequent patch. To make clear they are ACPI specific, gather all the information in a single structure. Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Christofer Dall <christoffer.dall@linaro.org> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-04-25irqchip/gic: Restore CPU interface checkingMarc Zyngier
When introducing the whole CPU feature detection framework, we lost the capability to detect a mismatched GIC configuration (using the GICv2 MMIO interface, but having the system register interface enabled). In order to solve this, use the new this_cpu_has_cap() helper. Also move the check to the CPU interface path in order to catch systems where the first CPU has been correctly configured, but the secondaries are not. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-08Merge branch 'linus' into irq/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-19irqchip/gic: Return IRQ_SET_MASK_OK_DONE in the set_affinity methodMarc Zyngier
Moving an SPI around doesn't require any extra work from the rest of the stack, and specially not for MSI-generated SPIs. It is then worth returning IRQ_SET_MASK_OK_DONE instead of IRQ_SET_MASK_OK, and simplify the other irqchips that rely on this behaviour (GICv2m and Marvell's ODMI controller). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1455894029-17270-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-11irqchip/gic: Only set the EOImodeNS bit for the root controllerJon Hunter
EOImode1 is only used for the root controller and hence only the root controller uses the eoimode1 functions for handling interrupts. However, if the root controller supports EOImode1, then the EOImodeNS bit will be set for all GICs, enabling EOImode1. This is not what we want and this causes interrupts on non-root GICs to only be dropped in priority but never deactivated. Therefore, only set the EOImodeNS bit for the root controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-11irqchip/gic: Only populate set_affinity for the root controllerJon Hunter
Setting the affinity of an IRQ, it only applicable for the root interrupt controller and so only populate this operator for the root controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-29Merge branch 'irq/gic-v2m-acpi' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull another round of GIC changes from Marc: ACPI support for GIV-v2m
2015-12-21irqchip/gic-v2m: acpi: Introducing GICv2m ACPI supportSuravee Suthikulpanit
This patch introduces gicv2m_acpi_init(), which uses information in MADT GIC MSI frames structure to initialize GICv2m driver. It also exposes gicv2m_init() function, which simplifies callers to a single GICv2m init function. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Duc Dang <dhdang@apm.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-21irqdomain: Introduce is_fwnode_irqchip helperSuravee Suthikulpanit
Since there will be several places checking if fwnode.type is equal FWNODE_IRQCHIP, this patch adds a convenient function for this purpose. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>