| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Cure the fallout from the MSI irqdomain overhaul which missed that
the Intel IOMMU does not register virtual function devices and
therefore never reaches the point where the MSI interrupt domain is
assigned. This made the VF devices use the non-remapped MSI domain
which is trapped by the IOMMU/remap unit
- Remove an extra space in the SGI_UV architecture type procfs output
for UV5
- Remove a unused function which was missed when removing the UV BAU
TLB shootdown handler"
* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iommu/vt-d: Cure VF irqdomain hickup
x86/platform/uv: Fix copied UV5 output archtype
x86/platform/uv: Drop last traces of uv_flush_tlb_others
|
|
The recent changes to store the MSI irqdomain pointer in struct device
missed that Intel DMAR does not register virtual function devices. Due to
that a VF device gets the plain PCI-MSI domain assigned and then issues
compat MSI messages which get caught by the interrupt remapping unit.
Cure that by inheriting the irq domain from the physical function
device.
Ideally the irqdomain would be associated to the bus, but DMAR can have
multiple units and therefore irqdomains on a single bus. The VF 'bus' could
of course inherit the domain from the PF, but that'd be yet another x86
oddity.
Fixes: 85a8dfc57a0b ("iommm/vt-d: Store irq domain in struct device")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/draft-87eekymlpz.fsf@nanos.tec.linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"Two tiny fixes for issues that make drivers under Xen unhappy under
certain conditions"
* 'stable/for-linus-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: remove the tbl_dma_addr argument to swiotlb_tbl_map_single
swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb"
|
|
The "data->flags" variable is a u64 so if one of the high 32 bits is
set the original code will allow it, but it should be rejected. The
fix is to declare "mask" as a u64 instead of a u32.
Fixes: d90573812eea ("iommu/uapi: Handle data and argsz filled by users")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101623.GA1127762@mwanda
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In prq_event_thread(), the QI_PGRP_PDP is wrongly set by
'req->pasid_present' which should be replaced to
'req->priv_data_present'.
Fixes: 5b438f4ba315 ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1604025444-6954-3-git-send-email-yi.y.sun@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Should get correct sid and set it into sdev. Because we execute
'sdev->sid != req->rid' in the loop of prq_event_thread().
Fixes: eb8d93ea3c1d ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1604025444-6954-2-git-send-email-yi.y.sun@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If calling find_domain() for a device which hasn't been probed by the
iommu core, below kernel NULL pointer dereference issue happens.
[ 362.736947] BUG: kernel NULL pointer dereference, address: 0000000000000038
[ 362.743953] #PF: supervisor read access in kernel mode
[ 362.749115] #PF: error_code(0x0000) - not-present page
[ 362.754278] PGD 0 P4D 0
[ 362.756843] Oops: 0000 [#1] SMP NOPTI
[ 362.760528] CPU: 0 PID: 844 Comm: cat Not tainted 5.9.0-rc4-intel-next+ #1
[ 362.767428] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake
U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3384.A02.1909200816
09/20/2019
[ 362.781109] RIP: 0010:find_domain+0xd/0x40
[ 362.785234] Code: 48 81 fb 60 28 d9 b2 75 de 5b 41 5c 41 5d 5d c3 0f 1f 00 66
2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 87 e0 02 00
00 55 <48> 8b 40 38 48 89 e5 48 83 f8 fe 0f 94 c1 48 85 ff
0f 94 c2 08 d1
[ 362.804041] RSP: 0018:ffffb09cc1f0bd38 EFLAGS: 00010046
[ 362.809292] RAX: 0000000000000000 RBX: ffff905b98e4fac8 RCX: 0000000000000000
[ 362.816452] RDX: 0000000000000001 RSI: ffff905b98e4fac8 RDI: ffff905b9ccd40d0
[ 362.823617] RBP: ffffb09cc1f0bda0 R08: ffffb09cc1f0bd48 R09: 000000000000000f
[ 362.830778] R10: ffffffffb266c080 R11: ffff905b9042602d R12: ffff905b98e4fac8
[ 362.837944] R13: ffffb09cc1f0bd48 R14: ffff905b9ccd40d0 R15: ffff905b98e4fac8
[ 362.845108] FS: 00007f8485460740(0000) GS:ffff905b9fc00000(0000)
knlGS:0000000000000000
[ 362.853227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 362.858996] CR2: 0000000000000038 CR3: 00000004627a6003 CR4: 0000000000770ef0
[ 362.866161] PKRU: fffffffc
[ 362.868890] Call Trace:
[ 362.871363] ? show_device_domain_translation+0x32/0x100
[ 362.876700] ? bind_store+0x110/0x110
[ 362.880387] ? klist_next+0x91/0x120
[ 362.883987] ? domain_translation_struct_show+0x50/0x50
[ 362.889237] bus_for_each_dev+0x79/0xc0
[ 362.893121] domain_translation_struct_show+0x36/0x50
[ 362.898204] seq_read+0x135/0x410
[ 362.901545] ? handle_mm_fault+0xeb8/0x1750
[ 362.905755] full_proxy_read+0x5c/0x90
[ 362.909526] vfs_read+0xa6/0x190
[ 362.912782] ksys_read+0x61/0xe0
[ 362.916037] __x64_sys_read+0x1a/0x20
[ 362.919725] do_syscall_64+0x37/0x80
[ 362.923329] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 362.928405] RIP: 0033:0x7f84855c5e95
Filter out those devices to avoid such error.
Fixes: e2726daea583d ("iommu/vt-d: debugfs: Add support to show page table internals")
Reported-and-tested-by: Xu Pengfei <pengfei.xu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org#v5.6+
Link: https://lore.kernel.org/r/20201028070725.24979-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Certain device drivers allocate IO queues on a per-cpu basis.
On AMD EPYC platform, which can support up-to 256 cpu threads,
this can exceed the current MAX_IRQ_PER_TABLE limit of 256,
and result in the error message:
AMD-Vi: Failed to allocate IRTE
This has been observed with certain NVME devices.
AMD IOMMU hardware can actually support upto 512 interrupt
remapping table entries. Therefore, update the driver to
match the hardware limit.
Please note that this also increases the size of interrupt remapping
table to 8KB per device when using the 128-bit IRTE format.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201015025002.87997-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad534a ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Fix a build regression with !CONFIG_IOMMU_API"
* tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built
|
|
Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units
with no supported address widths") dmar.c needs struct iommu_device to
be selected. We can drop this dependency by not dereferencing struct
iommu_device if IOMMU_API is not selected and by reusing the information
stored in iommu->drhd->ignored instead.
This fixes the following build error when IOMMU_API is not selected:
drivers/iommu/intel/dmar.c: In function ‘free_iommu’:
drivers/iommu/intel/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’
1139 | if (intel_iommu_enabled && iommu->iommu.ops) {
^
Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
a device tries DMA on memory owned by a guest. This needs new
fault-types as well as a rewrite of the IOMMU memory semaphore for
command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to still be
used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
iommu/vt-d: Gracefully handle DMAR units with no supported address widths
iommu/vt-d: Check UAPI data processed by IOMMU core
iommu/uapi: Handle data and argsz filled by users
iommu/uapi: Rename uapi functions
iommu/uapi: Use named union for user data
iommu/uapi: Add argsz for user filled data
docs: IOMMU user API
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
iommu/arm-smmu-v3: Add SVA device feature
iommu/arm-smmu-v3: Check for SVA features
iommu/arm-smmu-v3: Seize private ASID
iommu/arm-smmu-v3: Share process page tables
iommu/arm-smmu-v3: Move definitions to a header
iommu/io-pgtable-arm: Move some definitions to a header
iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
iommu/amd: Use 4K page for completion wait write-back semaphore
iommu/tegra-smmu: Allow to group clients in same swgroup
iommu/tegra-smmu: Fix iova->phys translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
|
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq updates from Thomas Gleixner:
"Surgery of the MSI interrupt handling to prepare the support of
upcoming devices which require non-PCI based MSI handling:
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which
allows to utilize the full functionality of hierarchical
irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the
irqdomain which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch
and let the last few users select it"
* tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS
x86/apic/msi: Unbreak DMAR and HPET MSI
iommu/amd: Remove domain search for PCI/MSI
iommu/vt-d: Remove domain search for PCI/MSI[X]
x86/irq: Make most MSI ops XEN private
x86/irq: Cleanup the arch_*_msi_irqs() leftovers
PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable
x86/pci: Set default irq domain in pcibios_add_device()
iommm/amd: Store irq domain in struct device
iommm/vt-d: Store irq domain in struct device
x86/xen: Wrap XEN MSI management into irqdomain
irqdomain/msi: Allow to override msi_domain_alloc/free_irqs()
x86/xen: Consolidate XEN-MSI init
x86/xen: Rework MSI teardown
x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init()
PCI/MSI: Provide pci_dev_has_special_msi_domain() helper
PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI
irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI
x86/irq: Initialize PCI/MSI domain at PCI init time
x86/pci: Reducde #ifdeffery in PCI init code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
|
|
'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/amd', 'x86/vt-d' and 'core' into next
|
|
Instead of bailing out completely, such a unit can still be used for
interrupt remapping.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/linux-iommu/549928db2de6532117f36c9c810373c14cf76f51.camel@infradead.org/
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Move more nitty gritty DMA implementation details into the common
internal header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Lock(&iommu->lock) without disabling irq causes lockdep warnings.
[ 12.703950] ========================================================
[ 12.703962] WARNING: possible irq lock inversion dependency detected
[ 12.703975] 5.9.0-rc6+ #659 Not tainted
[ 12.703983] --------------------------------------------------------
[ 12.703995] systemd-udevd/284 just changed the state of lock:
[ 12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.57+0x2e/0x90
[ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 12.704043] (&iommu->lock){+.+.}-{2:2}
[ 12.704045]
and interrupts could create inverse lock ordering between
them.
[ 12.704073]
other info that might help us debug this:
[ 12.704085] Possible interrupt unsafe locking scenario:
[ 12.704097] CPU0 CPU1
[ 12.704106] ---- ----
[ 12.704115] lock(&iommu->lock);
[ 12.704123] local_irq_disable();
[ 12.704134] lock(device_domain_lock);
[ 12.704146] lock(&iommu->lock);
[ 12.704158] <Interrupt>
[ 12.704164] lock(device_domain_lock);
[ 12.704174]
*** DEADLOCK ***
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU generic layer already does sanity checks on UAPI data for version
match and argsz range based on generic information.
This patch adjusts the following data checking responsibilities:
- removes the redundant version check from VT-d driver
- removes the check for vendor specific data size
- adds check for the use of reserved/undefined flags
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-7-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU user APIs are responsible for processing user data. This patch
changes the interface such that user pointers can be passed into IOMMU
code directly. Separate kernel APIs without user pointers are introduced
for in-kernel users of the UAPI functionality.
IOMMU UAPI data has a user filled argsz field which indicates the data
length of the structure. User data is not trusted, argsz must be
validated based on the current kernel data size, mandatory data size,
and feature flags.
User data may also be extended, resulting in possible argsz increase.
Backward compatibility is ensured based on size and flags (or
the functional equivalent fields) checking.
This patch adds sanity checks in the IOMMU layer. In addition to argsz,
reserved/unused fields in padding, flags, and version are also checked.
Details are documented in Documentation/userspace-api/iommu.rst
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-6-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
User APIs such as iommu_sva_unbind_gpasid() may also be used by the
kernel. Since we introduced user pointer to the UAPI functions,
in-kernel callers cannot share the same APIs. In-kernel callers are also
trusted, there is no need to validate the data.
We plan to have two flavors of the same API functions, one called
through ioctls, carrying a user pointer and one called directly with
valid IOMMU UAPI structs. To differentiate both, let's rename existing
functions with an iommu_uapi_ prefix.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-5-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU UAPI data size is filled by the user space which must be validated
by the kernel. To ensure backward compatibility, user data can only be
extended by either re-purpose padding bytes or extend the variable sized
union at the end. No size change is allowed before the union. Therefore,
the minimum size is the offset of the union.
To use offsetof() on the union, we must make it named.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/
Link: https://lore.kernel.org/r/1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 387caf0b759a ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes: 387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
if of_find_device_by_node() succeed, qcom_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200929014037.2436663-1-yukuai3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement the IOMMU device feature callbacks to support the SVA feature.
At the moment dev_has_feat() returns false since I/O Page Faults and BTM
aren't yet implemented.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-12-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Aggregate all sanity-checks for sharing CPU page tables with the SMMU
under a single ARM_SMMU_FEAT_SVA bit. For PCIe SVA, users also need to
check FEAT_ATS and FEAT_PRI. For platform SVA, they will have to check
FEAT_STALLS.
Introduce ARM_SMMU_FEAT_BTM (Broadcast TLB Maintenance), but don't
enable it at the moment. Since the entire VMID space is shared with the
CPU, enabling DVM (by clearing SMMU_CR2.PTM) could result in
over-invalidation and affect performance of stage-2 mappings.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200918101852.582559-11-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SMMU has a single ASID space, the union of shared and private ASID
sets. This means that the SMMU driver competes with the arch allocator
for ASIDs. Shared ASIDs are those of Linux processes, allocated by the
arch, and contribute in broadcast TLB maintenance. Private ASIDs are
allocated by the SMMU driver and used for "classic" map/unmap DMA. They
require command-queue TLB invalidations.
When we pin down an mm_context and get an ASID that is already in use by
the SMMU, it belongs to a private context. We used to simply abort the
bind, but this is unfair to users that would be unable to bind a few
seemingly random processes. Try to allocate a new private ASID for the
context, and make the old ASID shared.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-10-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With Shared Virtual Addressing (SVA), we need to mirror CPU TTBR, TCR,
MAIR and ASIDs in SMMU contexts. Each SMMU has a single ASID space split
into two sets, shared and private. Shared ASIDs correspond to those
obtained from the arch ASID allocator, and private ASIDs are used for
"classic" map/unmap DMA.
A possible conflict happens when trying to use a shared ASID that has
already been allocated for private use by the SMMU driver. This will be
addressed in a later patch by replacing the private ASID. At the
moment we return -EBUSY.
Each mm_struct shared with the SMMU will have a single context
descriptor. Add a refcount to keep track of this. It will be protected
by the global SVA lock.
Introduce a new arm-smmu-v3-sva.c file and the CONFIG_ARM_SMMU_V3_SVA
option to let users opt in SVA support.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-9-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow sharing structure definitions with the upcoming SVA support for
Arm SMMUv3, by moving them to a separate header. We could surgically
extract only what is needed but keeping all definitions in one place
looks nicer.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200918101852.582559-8-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Extract some of the most generic TCR defines, so they can be reused by
the page table sharing code.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200918101852.582559-6-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Reading the 'prod' MMIO register in order to determine whether or not
there is valid data beyond 'cons' for a given queue does not provide
sufficient dependency ordering, as the resulting access is address
dependent only on 'cons' and can therefore be speculated ahead of time,
potentially allowing stale data to be read by the CPU.
Use readl() instead of readl_relaxed() when updating the shadow copy of
the 'prod' pointer, so that all speculated memory reads from the
corresponding queue can occur only from valid slots.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/1601281922-117296-1-git-send-email-wangzhou1@hisilicon.com
[will: Use readl() instead of explicit barrier. Update 'cons' side to match.]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement the alloc_noncoherent method to provide memory that is neither
coherent not contiguous.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into dma-mapping-for-next
Pull in the latest 5.9 tree for the commit to revert the
V4L2_FLAG_MEMORY_NON_CONSISTENT uapi addition.
|
|
Several ACPI static tables contain references to proximity domains.
ACPI 6.3 has clarified that only entries in SRAT may define a new
domain (sec 5.2.16).
Those tables described in the ACPI spec have additional clarifying text.
NFIT: Table 5-132,
"Integer that represents the proximity domain to which the memory
belongs. This number must match with corresponding entry in the
SRAT table."
HMAT: Table 5-145,
"... This number must match with the corresponding entry in the SRAT
table's processor affinity structure ... if the initiator is a processor,
or the Generic Initiator Affinity Structure if the initiator is a generic
initiator".
IORT and DMAR are defined by external specifications.
Intel Virtualization Technology for Directed I/O Rev 3.1 does not make any
explicit statements, but the general SRAT statement above will still apply.
https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf
IO Remapping Table, Platform Design Document rev D, also makes not explicit
statement, but refers to ACPI SRAT table for more information and again the
generic SRAT statement above applies.
https://developer.arm.com/documentation/den0049/d/
In conclusion, any proximity domain specified in these tables, should be a
reference to a proximity domain also found in SRAT, and they should not be
able to instantiate a new domain. Hence we switch to pxm_to_node() which
will only return existing nodes.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the IOMMU SNP support bit is set in the IOMMU Extended Features
register, hardware re-purposes the following registers:
1. IOMMU Exclusion Base register (MMIO offset 0020h) to
Completion Wait Write-Back (CWWB) Base register
2. IOMMU Exclusion Range Limit (MMIO offset 0028h) to
Completion Wait Write-Back (CWWB) Range Limit register
and requires the IOMMU CWWB semaphore base and range to be programmed
in the register offset 0020h and 0028h accordingly.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU SNP support introduces two new IOMMU events:
* RMP Page Fault event
* RMP Hardware Error event
Hence, add reporting functions for these events.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOMMU SNP support requires the completion wait write-back semaphore to be
implemented using a 4K-aligned page, where the page address is to be
programmed into the newly introduced MMIO base/range registers.
This new scheme uses a per-iommu atomic variable to store the current
semaphore value, which is incremented for every completion wait command.
Since this new scheme is also compatible with non-SNP mode,
generalize the driver to use 4K page for completion-wait semaphore in
both modes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There can be clients using the same swgroup in DT, for example i2c0
and i2c1. The current driver will add them to separate IOMMU groups,
though it has implemented device_group() callback which is to group
devices using different swgroups like DC and DCB.
All clients having the same swgroup should be also added to the same
IOMMU group so as to share an asid. Otherwise, the asid register may
get overwritten every time a new device is attached.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200911071643.17212-4-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IOVA might not be always 4KB aligned. So tegra_smmu_iova_to_phys
function needs to add on the lower 12-bit offset from input iova.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200911071643.17212-3-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
PAGE_SHIFT and PAGE_MASK are defined corresponding to the page size
for CPU virtual addresses, which means PAGE_SHIFT could be a number
other than 12, but tegra-smmu maintains fixed 4KB IOVA pages and has
fixed [21:12] bit range for PTE entries.
So this patch replaces all PAGE_SHIFT/PAGE_MASK references with the
macros defined with SMMU_PTE_SHIFT.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200911071643.17212-2-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If there are multiple NUMA domains but the RHSA is missing in ACPI/DMAR
table, we could default to the device NUMA domain as fall back.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200904010303.2961-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20200922060843.31546-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: aa759fd376fb ("iommu/exynos: Add callback for initializing devices from device tree")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200918011335.909141-1-yukuai3@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Sprinkle a few `const`s where helpers don't need write access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Do a bit of prep work to add the upcoming adreno-smmu implementation.
Add an hook to allow the implementation to choose which context banks
to allocate.
Move some of the common structs to arm-smmu.h in anticipation of them
being used by the implementations and update some of the existing hooks
to pass more information that the implementation will need.
These modifications will be used by the upcoming Adreno SMMU
implementation to identify the GPU device and properly configure it
for pagetable switching.
Co-developed-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
