summaryrefslogtreecommitdiff
path: root/drivers/interconnect
AgeCommit message (Collapse)Author
2020-06-10Merge tag 'pm-5.8-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-01Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework changes for v5.8 from Viresh Kumar: "This contains: - support for interconnect bandwidth in the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - support for regulator enable/disable (Kamil Konieczny). This is based on three patches from the interconnect tree which shall get merged via Greg's tree." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-05-29opp: Expose bandwidth information via debugfsViresh Kumar
Expose the bandwidth information as well via debugfs. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-22Merge tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman
into char-misc-next Georgi writes: interconnect changes for 5.8 These are the interconnect changes for the 5.8-rc1 merge window: Core changes: - Convert the framework core from tristate to bool to make handling dependencies between other core frameworks easier - Add of_icc_get_by_index() - Add devm_of_icc_get() helper function - Add icc_enable() and icc_disable() helpers New drivers: - Platform driver for NXP i.MX8MM SoC - Platform driver for NXP i.MX8MN SoC - Platform driver for NXP i.MX8MQ SoC Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function interconnect: Add helpers for enabling/disabling a path interconnect: imx: Fix return value check in imx_icc_node_init_qos() interconnect: imx: Add platform driver for imx8mn interconnect: imx: Add platform driver for imx8mq interconnect: imx: Add platform driver for imx8mm interconnect: Add imx core driver dt-bindings: interconnect: Add bindings for imx8m noc interconnect: Add devm_of_icc_get() as exported API for users
2020-05-15Merge branch 'icc-get-by-index' into icc-nextGeorgi Djakov
This is an immutable branch shared with the OPP tree. It contains also the patches to convert the interconnect framework from tristate to bool after Greg agreed with that. This will make the integration between the OPP layer and interconnect much easier. * icc-get-by-index: interconnect: Add of_icc_get_by_index() helper function interconnect: Disallow interconnect core to be built as a module interconnect: Remove unused module exit code from core Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-15interconnect: Remove unused module exit code from coreJordan Crouse
The interconnect core is currently always built in: menuconfig INTERCONNECT bool "On-Chip Interconnect management support" So remove the module_exit function and symbolically rename module_init to device_initcall to drive home the point. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1572546532-19248-3-git-send-email-jcrouse@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-15interconnect: Disallow interconnect core to be built as a moduleViresh Kumar
Building individual drivers as modules is fine but allowing a core framework to be built as a module makes it really complex and should be avoided. Whatever uses the interconnect core APIs must also be built as a module if interconnect core is built as module, else we will see compilation failures. If another core framework (like cpufreq, clk, etc), that can't be built as module, needs to use interconnect APIs then we will start seeing compilation failures with allmodconfig configurations as the symbols (like of_icc_get()) used in other frameworks will not be available in the built-in image. Disallow the interconnect core to be built as a module to avoid all these issues. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/b789cce388dd1f2906492f307dea6780c398bc6a.1567065991.git.viresh.kumar@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-13interconnect: Add of_icc_get_by_index() helper functionGeorgi Djakov
This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10interconnect: Add helpers for enabling/disabling a pathGeorgi Djakov
There is a repeated pattern in multiple drivers where they want to switch the bandwidth between zero and some other value. This is happening often in the suspend/resume callbacks. Let's add helper functions to enable and disable the path, so that callers don't have to take care of remembering the bandwidth values and handle this in the framework instead. With this patch the users can call icc_disable() and icc_enable() to lower their bandwidth request to zero and then restore it back to it's previous value. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10interconnect: imx: Fix return value check in imx_icc_node_init_qos()Wei Yongjun
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: f0d8048525d7 ("interconnect: Add imx core driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20200509030214.14435-1-weiyongjun1@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-29interconnect: qcom: Move the static keyword to the front of declarationChenTao
Fix the following warning: Move the static keyword to the front of declaration of sdm845_icc_osm_l3 sdm845_aggre1_noc sc7180_icc_osm_l3 sdm845_aggre2_noc sdm845_config_noc sdm845_dc_noc sdm845_gladiator_noc sdm845_mem_noc sdm845_mmss_noc and sdm845_system_noc, resolve the following compiler warning that can be when building with warnings enabled (W=1): drivers/interconnect/qcom/osm-l3.c:81:1: warning: const static struct qcom_icc_desc sdm845_icc_osm_l3 = { drivers/interconnect/qcom/osm-l3.c:94:1: warning: const static struct qcom_icc_desc sc7180_icc_osm_l3 = { drivers/interconnect/qcom/sdm845.c:195:1: warning: const static struct qcom_icc_desc sdm845_aggre1_noc = { drivers/interconnect/qcom/sdm845.c:223:1: warning: const static struct qcom_icc_desc sdm845_aggre2_noc = { drivers/interconnect/qcom/sdm845.c:284:1: warning: const static struct qcom_icc_desc sdm845_config_noc = { drivers/interconnect/qcom/sdm845.c:300:1: warning: const static struct qcom_icc_desc sdm845_dc_noc = { drivers/interconnect/qcom/sdm845.c:318:1: warning: const static struct qcom_icc_desc sdm845_gladiator_noc = { drivers/interconnect/qcom/sdm845.c:353:1: warning: const static struct qcom_icc_desc sdm845_mem_noc = { drivers/interconnect/qcom/sdm845.c:387:1: warning: const static struct qcom_icc_desc sdm845_mmss_noc = { drivers/interconnect/qcom/sdm845.c:433:1: warning: const static struct qcom_icc_desc sdm845_system_noc = { Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ChenTao <chentao107@huawei.com> Link: https://lore.kernel.org/r/20200423132142.45174-1-chentao107@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200429101904.5771-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28interconnect: imx: Add platform driver for imx8mnLeonard Crestez
Add a platform driver for the i.MX8MN SoC describing bus topology, based on internal documentation. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/338a5409ce88811ba6c940ba06441db3faa8c187.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28interconnect: imx: Add platform driver for imx8mqLeonard Crestez
Add a platform driver for the i.MX8MQ SoC describing bus topology, based on internal documentation. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/864310d1f2599c3bd621e70b77028a6e89f6410e.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28interconnect: imx: Add platform driver for imx8mmLeonard Crestez
Add a platform driver for the i.MX8MM SoC describing bus topology. Bandwidth adjustments is currently only supported on the DDRC and main NOC. Scaling for the vpu/gpu/display NICs could be added in the future. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/b14eef179dbd837a486619724b8033490f49db72.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28interconnect: Add imx core driverLeonard Crestez
This adds support for i.MX SoC family to interconnect framework. Platform drivers can describe the interconnect graph and several adjustment knobs where icc node bandwidth is converted to a DEV_PM_QOS_MIN_FREQUENCY request. The interconnect provider is probed through the main NOC device and other adjustable nodes on the same graph are found from a fsl,scalable-nodes phandle array property. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/35920e673df6c04cbbb7d877a7d4ba25fd91a784.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-27interconnect: Add devm_of_icc_get() as exported API for usersAkash Asthana
Users can use devm version of of_icc_get() to benefit from automatic resource release. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1586946198-13912-2-git-send-email-akashast@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-23interconnect: qcom: Fix uninitialized tcs_cmd::waitMike Tipton
Currently, if tcs_cmd_gen is called with commit=false, then tcs_cmd::wait is left uninitialized. Since the tcs_cmd structures passed to this function aren't zero-initialized, then we're left with random wait values. This results in waiting for completion for more commands than is necessary, depending on what's on the stack at the time. Removing the unnecessary if-condition fixes this, but add an explicit memset of the tcs_cmd structure as well to ensure predictable behavior if more tcs_cmd members are added in the future. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200319231021.18108-1-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200415130327.23059-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20Merge tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman
into char-misc-next Georgi writes: interconnect changes for 5.7 Here is a pull request with interconnect changes for the 5.7-rc1 merge window. It contains just driver updates, and these are: - Refactoring of the SDM845 driver, which is now improved to better represent the hardware. - New driver for SC7180 platforms. - New driver for OSM L3 interconnect hardware found on SDM845/SC7180 platforms. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: Add OSM L3 support on SC7180 dt-bindings: interconnect: Add OSM L3 DT binding on SC7180 interconnect: qcom: Add OSM L3 interconnect provider support dt-bindings: interconnect: Add OSM L3 DT bindings interconnect: qcom: Allow icc node to be used across icc providers interconnect: qcom: Add SC7180 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings interconnect: qcom: sdm845: Split qnodes into their respective NoCs interconnect: qcom: Consolidate interconnect RPMh support dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter dt-bindings: interconnect: Convert qcom,sdm845 to DT schema
2020-03-03interconnect: qcom: Add OSM L3 support on SC7180Sibi Sankar
Add Operating State Manager (OSM) L3 interconnect provider support on SC7180 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Add OSM L3 interconnect provider supportSibi Sankar
On some Qualcomm SoCs, Operating State Manager (OSM) controls the resources of scaling L3 caches. Add a driver to handle bandwidth requests to OSM L3 from CPU on SDM845 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-4-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Allow icc node to be used across icc providersSibi Sankar
Move the icc node ids to a common header, this will allow for referencing/linking of icc nodes to multiple icc providers on SDM845 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-2-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Add SC7180 interconnect provider driverOdelu Kukatla
Add driver for the Qualcomm interconnect buses found in SC7180 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Link: https://lore.kernel.org/r/1583241493-21212-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: Handle memory allocation errorsGeorgi Djakov
When we allocate memory, kasprintf() can fail and we must check its return value. Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path") Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28interconnect: qcom: sdm845: Split qnodes into their respective NoCsDavid Dai
In order to better represent the hardware and its different Network-On-Chip devices, split the sdm845 provider driver into NoC specific providers. Remove duplicate functionality already provided by the icc rpmh and bcm voter drivers to calculate and commit bandwidth requests to hardware. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200209183411.17195-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-02-28interconnect: qcom: Consolidate interconnect RPMh supportDavid Dai
Add bcm voter driver and add support for RPMh specific interconnect providers which implements the set and aggregate functionalities that translates bandwidth requests into RPMh messages. These modules provide a common set of functionalities for all Qualcomm RPMh based interconnect providers and should help reduce code duplication when adding new providers. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200228095951.15457-1-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-07interconnect: qcom: Add MSM8916 interconnect provider driverGeorgi Djakov
Add driver for the Qualcomm interconnect buses found in MSM8916 based platforms. The topology consists of three NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-07interconnect: Check for valid path in icc_set_bw()Georgi Djakov
Use IS_ERR() to ensure that the path passed to icc_set_bw() is valid. Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-06interconnect: Print the tag in the debugfs summaryGeorgi Djakov
Now we can have a tag associated with the path. Add this information to the interconnect_summary file, as the current information in debugfs is incomplete. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: Add interconnect_graph file to debugfsLeonard Crestez
The interconnect graphs can be difficult to understand and the current "interconnect_summary" file doesn't even display links in any way. Add a new "interconnect_graph" file to debugfs in the graphviz "dot" format which describes interconnect providers, nodes and links. The file is human-readable and can be visualized by piping through graphviz. Example: ssh $TARGET cat /sys/kernel/debug/interconnect/interconnect_graph \ | dot -Tsvg > interconnect_graph.svg Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: qcom: Use the standard aggregate functionGeorgi Djakov
Now we have a common function for standard aggregation, so let's use it, instead of duplicating the code. Reviewed-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: Add a common standard aggregate functionGeorgi Djakov
Currently there is one very standard aggregation method that is used by several drivers. Let's add this as a common function, so that drivers could just point to it, instead of copy/pasting code. Suggested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: Add basic tracepointsGeorgi Djakov
The tracepoints can help with understanding the system behavior of a given interconnect path when the consumer drivers change their bandwidth demands. This might be interesting when we want to monitor the requested interconnect bandwidth for each client driver. The paths may share the same nodes and this will help to understand "who and when is requesting what". All this is useful for subsystem drivers developers and may also provide hints when optimizing the power and performance profile of the system. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: Add a name to struct icc_pathGeorgi Djakov
When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: Move internal structs into a separate fileGeorgi Djakov
Move the interconnect framework internal structs into a separate file, so that it can be included and used by ftrace code. This will allow us to expose some more useful information in the traces. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: qcom: Use the new common helper for node removalGeorgi Djakov
There is a new helper function for removing all nodes. Let's use it instead of duplicating the code. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: Add a common helper for removing all nodesGeorgi Djakov
The removal of all nodes from a provider seem to be a common functionality for all existing users and it would make sense to factor out this into a a common helper function. Suggested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-12interconnect: qcom: msm8974: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-5-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: qcs404: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.4 Link: https://lore.kernel.org/r/20191212075332.16202-4-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: sdm845: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20191212075332.16202-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-11Merge 5.4-rc7 into char-misc-nextGreg Kroah-Hartman
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08interconnect: qcom: add msm8974 driverBrian Masney
Add driver for the Qualcomm MSM8974 interconnect providers that support setting system bandwidth requirements between various network-on-chip fabrics. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191024103054.9770-3-masneyb@onstation.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191108125349.24191-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-20interconnect: Add locking in icc_set_tag()Georgi Djakov
We must ensure that the tag is not changed while we aggregate the requests. Currently the icc_set_tag() is not using any locks and this may cause the values to be aggregated incorrectly. Fix this by acquiring the icc_lock while we set the tag. Link: https://lore.kernel.org/lkml/20191018141750.17032-1-georgi.djakov@linaro.org/ Fixes: 127ab2cc5f19 ("interconnect: Add support for path tags") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-10-20interconnect: qcom: Fix icc_onecell_data allocationLeonard Crestez
This is a struct with a trailing zero-length array of icc_node pointers but it's allocated as if it were a single array of icc_nodes instead. This allocates too much memory at probe time but shouldn't have any noticeable effect. Both sdm845 and qcs404 are affected. Fix by replacing kcalloc with kzalloc and using the "struct_size" macro. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Link: https://lore.kernel.org/linux-pm/a7360abb6561917e30bbfaa6084578449152bf1d.1569348056.git.leonard.crestez@nxp.com/ Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-20drivers: qcom: Add BCM vote macro to headerJordan Crouse
The macro to generate a Bus Controller Manager (BCM) TCS command is used by the interconnect driver but might also be interesting to other drivers that need to construct TCS commands for sub processors so move it out of the sdm845 specific file and into the header. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-15interconnect: qcom: remove COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404Mao Wenan
There is one compilation error when CONFIG_INTERCONNECT_QCOM_QCS404=y and CONFIG_INTERCONNECT_QCOM_SMD_RPM=y, as well as CONFIG_COMPILE_TEST=y, but CONFIG_QCOM_SMD_RPM is not set, logs as below: drivers/interconnect/qcom/smd-rpm.o: In function `qcom_icc_rpm_smd_send': smd-rpm.c:(.text+0xe4): undefined reference to `qcom_rpm_smd_write' Makefile:1071: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 This is because INTERCONNECT_QCOM_QCS404 depends on QCOM_SMD_RPM || COMPILE_TEST. Here CONFIG_COMPILE_TEST=y, so CONFIG_INTERCONNECT_QCOM_SMD_RPM is selected. If CONFIG_QCOM_SMD_RPM is not set, then qcom_rpm_smd_write() is not defined, and compilation error happen. Fix this by removing COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404. Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: qcom: Add QCS404 interconnect provider driverBjorn Andersson
Add driver for the interconnect buses found in Qualcomm QCS404-based platforms. The topology consists of three NoCs that are controlled by a remote processor. This remote processor collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: qcom: Add interconnect RPM over SMD driverGeorgi Djakov
On some Qualcomm SoCs, there is a remote processor, which controls some of the Network-On-Chip interconnect resources. Other CPUs express their needs by communicating with this processor. Add a driver to handle communication with this remote processor. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: qcom: Add tagging and wake/sleep support for sdm845David Dai
Add support for wake and sleep commands by using a tag to indicate whether or not the aggregate and set requests fall into execution state specific bucket. Signed-off-by: David Dai <daidavid1@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-13interconnect: Add pre_aggregate() callbackGeorgi Djakov
Introduce an optional callback in interconnect provider drivers. It can be used for implementing actions, that need to be executed before the actual aggregation of the bandwidth requests has started. The benefit of this for now is that it will significantly simplify the code in provider drivers. Suggested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 02:16:19 +0000