summaryrefslogtreecommitdiff
path: root/drivers/interconnect/qcom
AgeCommit message (Collapse)Author
2020-12-28interconnect: qcom: fix rpmh link failuresArnd Bergmann
When CONFIG_COMPILE_TEST is set, it is possible to build some of the interconnect drivers into the kernel while their dependencies are loadable modules, which is bad: arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit': (.text+0x1f8): undefined reference to `rpmh_invalidate' arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init': (.text+0x2ac): undefined reference to `cmd_db_read_addr' arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data' The exact dependencies are a bit complicated, so split them out into a hidden Kconfig symbol that all drivers can in turn depend on to get it right. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-12-16Merge tag 'arm-soc-dt-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM device tree updates from Arnd Bergmann: "Across all platforms, there is a continued move towards DT schema for validating the dts files. As a result there are bug fixes for mistakes that are found using these schema, in addition to warnings from the dtc compiler. As usual, many changes are for adding support for additional on-chip and on-board components in the machines we already support. The newly supported SoCs for this release are: - MStar Infinity2M, a low-end IP camera chip based on a dual-core Cortex-A7, otherwise similar to the Infinity chip we already support. This is also known as the SigmaStar SSD202D, and we add support for the Honestar ssd201htv2 development kit. - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller (BMC), in the same family as the NPCM750. This gets used in the Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of which are added as well. - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own Brahma-B53 CPU. Support is also added for the Asus ROG Rapture GT-AC5300 high-end WiFi router based on this chip. - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores, meant for faster Chromebooks and tablets. It gets added along with its reference design. - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's generation, also added along with its reference board. This one is still based on Cortex-A75/A55. - Mediatek MT8167 is a version of the already supported MT8516 chip, both based on Cortex-A35. It gets added along with the "Pumpkin" single board computer, but is likely to also make its way into low-end tablets in the future. For the already supported chips, there are a number of new boards. Interestingly there are more 32-bit machines added this time than 64-bit. Here is a brief list of the new boards: - Three new Mikrotik router variants based on Marvell Prestera 98DX3236, a close relative of the more common Armada XP - A reference board for the Marvell Armada 382 - Three new servers using ASpeed baseboard management controllers, the actual machines being from Bytedance, Facebook and IBM, and one machine using the Nuvoton NPCM750 BMC. - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412. - The usual set of 32-bit i.MX industrial/embedded hardware: * Protonic WD3 (tractor e-cockpit) * Kamstrup OMNIA Flex Concentrator (smart grid platform) * Van der Laan LANMCU (food storage) * Altesco I6P (vehicle inspection stations) * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the aleady supported DHCOM module - Three new Allwinner SoC based single-board computers: * NanoPi R1 (H3 based) * FriendlyArm ZeroPi (H3 based) * Elimo Initium SBC (S3 based) - Ouya Game Console based on Nvidia Tegra 3 - Version 5 of the already supported Zynq Z-Turn MYIR Board - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which is a repackaged 16-core LX2160A - A series of Kontron i.MX8M Mini baseboard/SoM versions - Espressobin Ultra, a new variant of the popular Armada 3700 based board, - IEI Puzzle-M801, a rackmount network appliance based on Marvell Armada 8040 - Microsoft Lumia 950 XL, a phone - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and sm8150, respectively - Three new board variants of the "Trogdor" Chromebook (sc7180) - New board variants of the Renesas based "Kingfisher" and "HiHope" reference boards - Kobol Helios64, an open source NAS appliance based on Rockchips RK3399 - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few carrier boards" * tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits) arm64: dts: sparx5: Add SGPIO devices arm64: dts: sparx5: Add reset support dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ARM: mstar: SMP support ARM: mstar: Wire up smpctrl for SSD201/SSD202D ARM: mstar: Add smp ctrl registers to infinity2m dtsi ARM: mstar: Add dts for Honestar ssd201htv2 ARM: mstar: Add chip level dtsi for SSD202D ARM: mstar: Add common dtsi for SSD201/SSD202D ARM: mstar: Add infinity2m support dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards dt-bindings: vendor-prefixes: Add honestar vendor prefix dt-bindings: mstar: Add binding details for mstar,smpctrl ARM: mstar: Fill in GPIO controller properties for infinity ARM: mstar: Add gpio controller to MStar base dtsi ARM: zynq: Fix incorrect reference to XM013 instead of XM011 ARM: zynq: Convert at25 binding to new description on zc770-xm013 ARM: zynq: Fix OCM mapping to be aligned with binding on zc702 ARM: zynq: Fix leds subnode name for zc702/zybo-z7 ARM: zynq: Rename bus to be align with simple-bus yaml ...
2020-12-08Merge tag 'qcom-arm64-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge tag 'icc-5.11-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.11 Here are the interconnect changes for the 5.10-rc1 merge window consisting of new driver and a cleanup. Driver changes: - New driver for Samsung Exynos SoCs - Misc cleanups Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: MAINTAINERS: Add entry for Samsung interconnect drivers interconnect: Add generic interconnect driver for Exynos SoCs interconnect: qcom: Simplify the vcd compare function
2020-11-30interconnect: qcom: sdm845: Add the missing nodes for QUPGeorgi Djakov
The QUP nodes are currently defined just as entries in the topology, but they are not referenced by any of the NoCs. Let's fix this and "attach" them to their NoCs, so that the QUP drivers are able to use them as path endpoints and scale their bandwidth. This is based on the information from the downstream msm-4.9 kernel. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201105135211.7160-2-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-30interconnect: qcom: Simplify the vcd compare functionGeorgi Djakov
Let's simplify the cmp_vcd() function and replace the conditionals with just a single statement, which also improves readability. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20201013171923.7351-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: qcom: qcs404: Remove GPU and display RPM IDsGeorgi Djakov
The following errors are noticed during boot on a QCS404 board: [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6 [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6 These errors show when we try to configure the GPU and display nodes. Since these particular nodes aren't supported on RPM and are purely local, we should just change their mas_rpm_id to -1 to avoid any requests being sent for these master IDs. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-20interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodesGeorgi Djakov
Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-18interconnect: qcom: msm8974: Don't boost the NoC rate during bootGeorgi Djakov
It has been reported that on Fairphone 2 (msm8974-based), increasing the clock rate for some of the NoCs during boot may lead to hangs. Let's restore the original behavior and not touch the clock rate of any of the NoCs to fix the regression. Reported-by: Luca Weiss <luca@z3ntu.xyz> Tested-by: Luca Weiss <luca@z3ntu.xyz> Fixes: b1d681d8d324 ("interconnect: Add sync state support") Link: https://lore.kernel.org/r/20201109124512.10776-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-11-18interconnect: qcom: msm8974: Prevent integer overflow in rateGeorgi Djakov
When sync_state support got introduced recently, by default we try to set the NoCs to run initially at maximum rate. But as these values are aggregated, we may end with a really big clock rate value, which is then converted from "u64" to "long" during the clock rate rounding. But on 32bit platforms this may result an overflow. Fix it by making sure that the rate is within range. Reported-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20201106144847.7726-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-27interconnect: qcom: use icc_sync state for sm8[12]50Dmitry Baryshkov
In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-22interconnect: qcom: Ensure that the floor bandwidth value is enforcedGeorgi Djakov
Take into account the initial bandwidth from the framework and update the internal sum and max values before committing if needed. This will ensure that the floor bandwidth values are enforced until the providers get into sync state. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Tested-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/20201021155938.9223-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sc7180: Init BCMs before creating the nodesGeorgi Djakov
Currently if we use sync_state, by default the bandwidth is maxed out, but in order to set this in hardware, the BCMs (Bus Clock Managers) need to be initialized first. Move the BCM initialization before creating the nodes to fix this. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-3-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sdm845: Init BCMs before creating the nodesGeorgi Djakov
Currently if we use sync_state, by default the bandwidth is maxed out, but in order to set this in hardware, the BCMs (Bus Clock Managers) need to be initialized first. Move the BCM initialization before creating the nodes to fix this. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-15interconnect: qcom: sdm845: Enable keepalive for the MM1 BCMGeorgi Djakov
After enabling interconnect scaling for display on the db845c board, in certain configurations the board hangs, while the following errors are observed on the console: Error sending AMC RPMH requests (-110) qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 ... In this specific case, the above is related to one of the sequencers being stuck, while client drivers are returning from probe and trying to disable the currently unused clock and interconnect resources. Generally we want to keep the multimedia NoC enabled like the rest of the NoCs, so let's set the keepalive flag on it too. Fixes: aae57773fbe0 ("interconnect: qcom: sdm845: Split qnodes into their respective NoCs") Reported-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20201012194034.26944-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18Merge branch 'icc-syncstate' into icc-nextGeorgi Djakov
* icc-syncstate: interconnect: Add get_bw() callback interconnect: Add sync state support interconnect: qcom: Use icc_sync_state Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-18interconnect: qcom: Use icc_sync_stateGeorgi Djakov
Lowering the bandwidth on the bus might have negative consequences if it's done before all consumers had a chance to cast their vote. Now by default the framework sets the bandwidth to maximum during boot. We need to use the icc_sync_state callback to notify the framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Link: https://lore.kernel.org/r/20200825170152.6434-4-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-15interconnect: qcom: osm-l3: Mark more structures constStephen Boyd
These structures aren't modified at runtime. Mark them const so they get moved to read-only memory. We have to cast away const in one place when we store into the data member of struct icc_node. This is paired with a re-const of the data member when it is extracted in qcom_icc_set(). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200914182112.513981-1-swboyd@chromium.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add EPSS L3 support on SM8250Sibi Sankar
Add Epoch Subsystem (EPSS) L3 interconnect provider support on SM8250 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200801123049.32398-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Lay the groundwork for adding EPSS supportSibi Sankar
Lay the groundwork for adding Epoch Subsystem (EPSS) L3 support on SM8250. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200801123049.32398-4-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add OSM L3 support on SM8150Sibi Sankar
Add Operation State Manager (OSM) L3 interconnect provider support on SM8150 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200801123049.32398-3-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: sc7180: Replace xlate with xlate_extendedSibi Sankar
Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-7-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: sdm845: Replace xlate with xlate_extendedGeorgi Djakov
Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-5-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Implement xlate_extended() to parse tagsGeorgi Djakov
Implement a function to parse the arguments of the "interconnects" DT property and populate the interconnect path tags if this information is available. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200903133134.17201-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add support for per-BCM scaling factorsMike Tipton
Currently, bcm-voter always assumes requests are made in KBps and that BCM HW always wants them in Bps, so it always scales the requests by 1000. However, certain use cases and BCMs may use different units. Thus, add support for BCM-specific scaling factors. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-7-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Only wait for completion in AMC/WAKE by defaultMike Tipton
Change the default TCS wait behavior to only wait for completion in AMC and WAKE. Waiting isn't necessary in the SLEEP TCS, since votes are only being removed in this case. Resources can be safely disabled asynchronously in parallel with the rest of the power collapse sequence. This reduces the sleep entry latency. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-6-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Support bcm-voter-specific TCS wait behaviorMike Tipton
Currently, all bcm-voters set tcs_cmd::wait=true for the last VCD command in each TCS (AMC, WAKE, and SLEEP). However, some bcm-voters don't need the completion and instead need to optimize for latency. For instance, disabling wait-for-completion in the WAKE set can decrease resume latency and allow for certain operations to occur in parallel with the WAKE TCS triggering. This is only safe in very specific situations. Keep the default behavior of always waiting, but allow it to be overridden in devicetree. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-5-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08dt-bindings: interconnect: Add generic qcom bindingsMike Tipton
Add generic qcom interconnect bindings that are common across platforms. In particular, these include QCOM_ICC_TAG_* macros that clients can use when calling icc_set_tag(). Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200903192149.30385-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add SM8250 interconnect provider driverJonathan Marek
Add driver for the Qualcomm interconnect buses found in SM8250 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SC7180 driver and generated from downstream dts. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200728023811.5607-6-jonathan@marek.ca Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add SM8150 interconnect provider driverJonathan Marek
Add driver for the Qualcomm interconnect buses found in SM8150 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SC7180 driver and generated from downstream dts. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200728023811.5607-5-jonathan@marek.ca Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-04interconnect: qcom: Fix small BW votes being truncated to zeroMike Tipton
Small BW votes that translate to less than a single BCM unit are currently truncated to zero. Ensure that non-zero BW requests always result in at least a vote of 1 to BCM. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-07-23interconnect: msm8916: Fix buswidth of pcnoc_s nodesGeorgi Djakov
The buswidth of the pcnoc_s_* nodes is actually not 8, but 4 bytes. Let's fix it. Reported-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22soc: qcom: rpmh: Update rpmh_invalidate function to return voidMaulik Shah
Currently rpmh_invalidate() always returns success. Update its return type to void. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-29interconnect: qcom: Move the static keyword to the front of declarationChenTao
Fix the following warning: Move the static keyword to the front of declaration of sdm845_icc_osm_l3 sdm845_aggre1_noc sc7180_icc_osm_l3 sdm845_aggre2_noc sdm845_config_noc sdm845_dc_noc sdm845_gladiator_noc sdm845_mem_noc sdm845_mmss_noc and sdm845_system_noc, resolve the following compiler warning that can be when building with warnings enabled (W=1): drivers/interconnect/qcom/osm-l3.c:81:1: warning: const static struct qcom_icc_desc sdm845_icc_osm_l3 = { drivers/interconnect/qcom/osm-l3.c:94:1: warning: const static struct qcom_icc_desc sc7180_icc_osm_l3 = { drivers/interconnect/qcom/sdm845.c:195:1: warning: const static struct qcom_icc_desc sdm845_aggre1_noc = { drivers/interconnect/qcom/sdm845.c:223:1: warning: const static struct qcom_icc_desc sdm845_aggre2_noc = { drivers/interconnect/qcom/sdm845.c:284:1: warning: const static struct qcom_icc_desc sdm845_config_noc = { drivers/interconnect/qcom/sdm845.c:300:1: warning: const static struct qcom_icc_desc sdm845_dc_noc = { drivers/interconnect/qcom/sdm845.c:318:1: warning: const static struct qcom_icc_desc sdm845_gladiator_noc = { drivers/interconnect/qcom/sdm845.c:353:1: warning: const static struct qcom_icc_desc sdm845_mem_noc = { drivers/interconnect/qcom/sdm845.c:387:1: warning: const static struct qcom_icc_desc sdm845_mmss_noc = { drivers/interconnect/qcom/sdm845.c:433:1: warning: const static struct qcom_icc_desc sdm845_system_noc = { Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ChenTao <chentao107@huawei.com> Link: https://lore.kernel.org/r/20200423132142.45174-1-chentao107@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200429101904.5771-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23interconnect: qcom: Fix uninitialized tcs_cmd::waitMike Tipton
Currently, if tcs_cmd_gen is called with commit=false, then tcs_cmd::wait is left uninitialized. Since the tcs_cmd structures passed to this function aren't zero-initialized, then we're left with random wait values. This results in waiting for completion for more commands than is necessary, depending on what's on the stack at the time. Removing the unnecessary if-condition fixes this, but add an explicit memset of the tcs_cmd structure as well to ensure predictable behavior if more tcs_cmd members are added in the future. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200319231021.18108-1-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200415130327.23059-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-03interconnect: qcom: Add OSM L3 support on SC7180Sibi Sankar
Add Operating State Manager (OSM) L3 interconnect provider support on SC7180 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Add OSM L3 interconnect provider supportSibi Sankar
On some Qualcomm SoCs, Operating State Manager (OSM) controls the resources of scaling L3 caches. Add a driver to handle bandwidth requests to OSM L3 from CPU on SDM845 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-4-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Allow icc node to be used across icc providersSibi Sankar
Move the icc node ids to a common header, this will allow for referencing/linking of icc nodes to multiple icc providers on SDM845 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-2-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Add SC7180 interconnect provider driverOdelu Kukatla
Add driver for the Qualcomm interconnect buses found in SC7180 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Link: https://lore.kernel.org/r/1583241493-21212-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-02-28interconnect: qcom: sdm845: Split qnodes into their respective NoCsDavid Dai
In order to better represent the hardware and its different Network-On-Chip devices, split the sdm845 provider driver into NoC specific providers. Remove duplicate functionality already provided by the icc rpmh and bcm voter drivers to calculate and commit bandwidth requests to hardware. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200209183411.17195-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-02-28interconnect: qcom: Consolidate interconnect RPMh supportDavid Dai
Add bcm voter driver and add support for RPMh specific interconnect providers which implements the set and aggregate functionalities that translates bandwidth requests into RPMh messages. These modules provide a common set of functionalities for all Qualcomm RPMh based interconnect providers and should help reduce code duplication when adding new providers. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200228095951.15457-1-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-07interconnect: qcom: Add MSM8916 interconnect provider driverGeorgi Djakov
Add driver for the Qualcomm interconnect buses found in MSM8916 based platforms. The topology consists of three NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: qcom: Use the standard aggregate functionGeorgi Djakov
Now we have a common function for standard aggregation, so let's use it, instead of duplicating the code. Reviewed-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-16interconnect: qcom: Use the new common helper for node removalGeorgi Djakov
There is a new helper function for removing all nodes. Let's use it instead of duplicating the code. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-12interconnect: qcom: msm8974: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-5-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: qcs404: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: 5e4e6c4d3ae0 ("interconnect: qcom: Add QCS404 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.4 Link: https://lore.kernel.org/r/20191212075332.16202-4-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: sdm845: Walk the list safely on node removalGeorgi Djakov
As we will remove items off the list using list_del(), we need to use the safe version of list_for_each_entry(). Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver") Reported-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20191212075332.16202-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-12interconnect: qcom: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191212075332.16202-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-11Merge 5.4-rc7 into char-misc-nextGreg Kroah-Hartman
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-09 19:59:13 +0000