summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2014-08-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Second round of updates for the input subsystem. Mostly small fixups to the code merged in the first round (atmel_mxt_ts, wacom) but also a smallish patch to xbox driver to support Xbox One controllers and a patch to better handle Synaptics profile sensors found in Cr-48 Chromebooks that should not affect any other devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: edt-ft5x06 - remove superfluous assignment Input: xpad - add support for Xbox One controllers Input: atmel_mxt_ts - fix a few issues reported by Coverity Input: atmel_mxt_ts - split config update a bit Input: atmel_mxt_ts - simplify mxt_initialize a bit Input: joystick - use get_cycles on ARMv8 Input: wacom - fix compiler warning if !CONFIG_PM Input: cap1106 - allow changing key mapping from userspace Input: synaptics - use firmware data for Cr-48 Input: synaptics - properly initialize slots for semi-MT Input: MT - make slot cleanup callable outside mt_sync_frame() Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AA
2014-08-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 3.17.
2014-08-13Input: edt-ft5x06 - remove superfluous assignmentMaks Naumov
Somehow we ended up with a duplicate line in edt_ft5x06_register_write() Signed-off-by: Maks Naumov <maksqwe1@ukr.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: xpad - add support for Xbox One controllersTed Mielczarek
Xbox One controllers require an initialization message to start sending data, so xpad_init_output becomes a required function. The Xbox One controller does not have LEDs like the Xbox 360 controller, so that functionality is not implemented. The format of messages controlling rumble is currently undocumented, so rumble support is not yet implemented. Note that Xbox One controller advertises three interfaces with the same interface class, subclass and protocol, so we have to also match against interface number. Signed-off-by: Ted Mielczarek <ted@mielczarek.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - fix a few issues reported by CoverityDmitry Torokhov
This should fix the following issues reported by Coverity: *** CID 1230625: Logically dead code (DEADCODE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1692 in mxt_initialize() *** CID 1230627: Missing break in switch (MISSING_BREAK) /drivers/input/touchscreen/atmel_mxt_ts.c: 1436 in mxt_get_object_table() *** CID 1230629: Out-of-bounds write (OVERRUN) /drivers/input/touchscreen/atmel_mxt_ts.c: 1267 in mxt_update_cfg() *** CID 1230632: Unused pointer value (UNUSED_VALUE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1211 in mxt_update_cfg() Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - split config update a bitDmitry Torokhov
Let's split config update code a bit so it is hopefully a bit easier to read. Also, the firmware update callback should be the entity releasing firmware blob, not lower layers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-13Input: atmel_mxt_ts - simplify mxt_initialize a bitDmitry Torokhov
I think having control flow with 2 goto/labels/flags is quite hard to read, this version is a bit more readable IMO. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-12Input: joystick - use get_cycles on ARMv8Mark Brown
As with ARM the ARMv8 architecture provides a cycle counter which can be used to provide a high resolution time for the joystick driver and silence the build warning that results from not having a precise timer on ARMv8, making allmodconfig and allyesconfig quieter. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
2014-08-08Input: cap1106 - allow changing key mapping from userspaceDmitry Torokhov
Wire up support for EVIOC{G|S}KEYCODE to allow users change key mappings from userspace. Reviewed-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08Input: synaptics - use firmware data for Cr-48Henrik Rydberg
The profile sensor clickpad in a Cr-48 Chromebook does a reasonable job of tracking individual fingers. This tracking isn't perfect, but, experiments show that it works better than just passing "semi-mt" data to userspace, and making userspace try to deduce where the fingers are given a bounding box. This patch tries to report correct two-finger positions instead of the {(min_x, min_y), (max_x, max_y)} for profile sensor clickpads on Cr-48 chromebooks. Note that this device's firmware always reports the higher (smaller y) finger in the "sgm" packet, and the lower (larger y) finger in the "agm" packet. Thus, when a new finger arrives on the pad, the kernel driver uses input core's contact tracking facilities to match contacts with slots. Inspired by patch by Daniel Kurtz <djkurtz@chromium.org> and Chung-yih Wang <cywang@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: synaptics - properly initialize slots for semi-MTDmitry Torokhov
Semi-MT devices are pointers too, so let's tell that to input_mt_init_slots(), as well as let it set up the devices as semi-MT, instead of us doing it manually. Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: MT - make slot cleanup callable outside mt_sync_frame()Henrik Rydberg
Some semi-mt drivers use the slots in a manual way, but may still want to call parts of the frame synchronization logic. This patch makes input_mt_drop_unused callable from those drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AANick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED updates from Bryan Wu: "This cycle we got: - a fix of attribute-creation race for the whole leds subsystem - new drivers (HID:GT683R, leds-ipaq-micro) - other fixing and clean up" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits) leds: ipaq-micro: fix sparse non static symbol warning leds: add driver for the iPAQ micro Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells leds: convert blink timer to workqueue leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default leds:pca963x: Always initialize MODE2 register leds:pca963x: Add support for PCA9635 LED driver chip HID: gt683r: move mode attribute to led-class devices HID: gt683r: fix race condition HID: add support for MSI GT683R led panels leds: lp55xx-common: fix attribute-creation race leds: lp55xx-common: fix sysfs entry leak input: lm8323: fix attribute-creation race leds: wm831x-status: fix attribute-creation race leds: ss4200: fix attribute-creation race leds: ns2: fix attribute-creation race leds: netxbig: fix attribute-creation race leds: max8997: fix attribute-creation race leds: lm3642: fix attribute-creation race leds: lm355x: fix attribute-creation race ...
2014-08-07Merge tag 'mfd-for-linus-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD update from Lee Jones: "Changes to existing drivers: - checkpatch fixes throughout the subsystem - use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core - use DMA in rtsx_pcr - restrict building on unsupported architectures on timberdale, cs5535 - SPI hardening in cros_ec_spi - more robust error handing in asic3, cros_ec, ab8500-debugfs, max77686 and pcf50633-core - reorder PM runtime and regulator handing during shutdown in arizona - enable wakeup in cros_ec_spi - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld, tps65912-spi, wm5110-tables and ab8500-debugfs - add regulator handing into suspend() in sec-core - remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel - use cross-architecture friendly data sizes in stmpe-i2c, arizona, max77686 and tps65910 - devicetree documentation updates throughout - provide power management support in max77686 - few OF clean-ups in max77686 - use manged resources in tps6105x New drivers/supported devices: - add support for s2mpu02 to sec-core - add support for Allwinner A32 to sun6i-prcm - add support for Maxim 77802 in max77686 - add support for DA9063 AD in da9063 - new driver for Intel PMICs (generic) and specifically Crystal Cove (Re-)moved drivers == - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb" * tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits) MAINTAINERS: Update MFD repo location mfd: omap-usb-host: Fix improper mask use. mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it mfd: arizona: Add missing handling for ISRC3 under/overclocked mfd: wm5110: Add new interrupt register definitions mfd: arizona: Rename thermal shutdown interrupt mfd: wm5110: Add in the output done interrupts mfd: wm5110: Remove non-existant interrupts mfd: tps65912-spi: Remove unused variable mfd: htc-i2cpld: Remove unused code mfd: da9063: Add support for AD silicon variant mfd: arizona: Map MICVDD from extcon device to the Arizona core mfd: arizona: Add MICVDD to mapped regulators for wm8997 mfd: max77686: Ensure device type IDs are architecture agnostic mfd: max77686: Add Maxim 77802 PMIC support mfd: tps6105x: Use managed resources when allocating memory mfd: wm8997-tables: Suppress 'line over 80 chars' warnings mfd: kempld-core: Correct a variety of checkpatch warnings mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch mfd: si476x-cmd: Remedy checkpatch style complains ...
2014-08-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 3.17.
2014-08-06Merge branch 'wacom' into nextDmitry Torokhov
Merge large update to Wacom driver, converting it from USB to a HID driver and unifying wired and bluetooth support, from Benjamin Tissoires.
2014-08-06Input: hyperv-keyboard - register as a wakeup sourceDexuan Cui
With this patch, we can press a key to wake up the VM after the VM executes "echo freeze > /sys/power/state". Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds
Pull sparc updates from David Miller: 1) Add sparc RAM output to /proc/iomem, from Bob Picco. 2) Allow seeks on /dev/mdesc, from Khalid Aziz. 3) Cleanup sparc64 I/O accessors, from Sam Ravnborg. 4) If update_mmu_cache{,_pmd}() is called with an not-valid mapping, do not insert it into the TLB miss hash tables otherwise we'll livelock. Based upon work by Christopher Alexander Tobias Schulze. 5) Fix BREAK detection in sunsab driver when no actual characters are pending, from Christopher Alexander Tobias Schulze. 6) Because we have modules --> openfirmware --> vmalloc ordering of virtual memory, the lazy VMAP TLB flusher can cons up an invocation of flush_tlb_kernel_range() that covers the openfirmware address range. Unfortunately this will flush out the firmware's locked TLB mapping which causes all kinds of trouble. Just split up the flush request if this happens, but in the long term the lazy VMAP flusher should probably be made a little bit smarter. Based upon work by Christopher Alexander Tobias Schulze. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: sparc64: Fix up merge thinko. sparc: Add "install" target arch/sparc/math-emu/math_32.c: drop stray break operator sparc64: ldc_connect() should not return EINVAL when handshake is in progress. sparc64: Guard against flushing openfirmware mappings. sunsab: Fix detection of BREAK on sunsab serial console bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000 sparc64: Do not insert non-valid PTEs into the TSB hash table. sparc64: avoid code duplication in io_64.h sparc64: reorder functions in io_64.h sparc64: drop unused SLOW_DOWN_IO definitions sparc64: remove macro indirection in io_64.h sparc64: update IO access functions in PeeCeeI sparcspkr: use sbus_*() primitives for IO sparc: Add support for seek and shorter read to /dev/mdesc sparc: use %s for unaligned panic drivers/sbus/char: Micro-optimization in display7seg.c display7seg: Introduce the use of the managed version of kzalloc sparc64 - add mem to iomem resource
2014-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcDavid S. Miller
Conflicts: arch/sparc/mm/init_64.c Conflict was simple non-overlapping additions. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-07-31Input: imx_keypad - remove ifdef round PM methodsFabio Estevam
We can annotate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31Input: jornada720_ts - get rid of space indentation and use tabPramod Gurav
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31Input: jornada720_ts - switch to using managed resourcesPramod Gurav
This switches the driver to using managed resources to simplify error handling and to do away with remove function. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: alps - Rushmore and v7 resolution supportHans de Goede
Add support for querying the physical size from the touchpad for Rushmore and v7 touchpads, and use that to tell userspace the device resolution. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: mcs5000_ts - remove ifdef around power management methodsFabio Estevam
We can annonate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEPFabio Estevam
When a kernel has CONFIG_PM=y and CONFIG_PM_SLEEP=n the following warnings are seen: drivers/input/touchscreen/mcs5000_ts.c:252:12: warning: 'mcs5000_ts_suspend' defined but not used [-Wunused-function] static int mcs5000_ts_suspend(struct device *dev) ^ drivers/input/touchscreen/mcs5000_ts.c:262:12: warning: 'mcs5000_ts_resume' defined but not used [-Wunused-function] static int mcs5000_ts_resume(struct device *dev) Protect the suspend/resume functions with CONFIG_PM_SLEEP in order to fix these build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: ads7846 - release resources on failure for clean exitPramod Gurav
Input device must be released(input_free_device) when ads7846_probe_dt fails. This fixes the same by releasing resources on failure. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: atmel_mxt_ts - use deep sleep mode when stoppedNick Dyer
By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - add device tree supportRoger Quadros
Provide device tree support and binding information. Also provide support for a new chip "pixcir_tangoc". Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDsRoger Quadros
Some variants of the Pixcir touch controller support up to 5 simultaneous fingers and hardware tracking IDs. Prepare the driver for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - use Type-B Multi-Touch protocolRoger Quadros
Switch to using the Type-B Multi-Touch protocol. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add support for v7 devicesYunkang Tang
Such as found on the new Toshiba Portégé Z30-A and Z40-A. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> [hdegoede@redhat.com: Remove softbutton handling, this is done in userspace] [hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD] [hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is enough] [hdegoede@redhat.com: Various cleanups / refactoring] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - cache firmware versionHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - change decode function prototype to return an intHans de Goede
So that decode functions can return a failure when appropriate. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - report 2 touches when we've > 2 fingersHans de Goede
If we detect more then 2 fingers report 2 touches, rather then only reporting the upper left corner of the bounding box. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add an alps_report_semi_mt_data functionHans de Goede
Move all the semi-mt specific handling shared between the v3 and v4 handling code to a common helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use single touch data when v3 mt data contains only one fingerHans de Goede
For v3 protocol devices, use the more accurate single touch data when the mt data contains only one finger. Note the mt data reporting a finger count of 1 should never happen, but better safe then sorry. This brings the v3 bitmap handling in line with what the v4 code does, allowing to factor out the common bits into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use standard contact tracking instead of DIYHans de Goede
When there are 2 fingers on the pad we don't know which one is which, so use input_mt_assign_slots to make sure the right set of coordinates ends up in the right slot. Besides ensuring things end up in the right slot, this also results in a nice cleanup, since sync_frame also handles non mt position and btn_touch reporting. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use struct input_mt_pos to track coordinatesHans de Goede
This is a preparation patch for switching the DIY mt handling to using input_mt_assign_slots && input_mt_sync_frame. struct alps_fields is quite large, so while making changes to almost all uses of it lets put it in our priv data instead of on the stack. Having it in our priv data also allows using it directly for storing values which need to be cached, rather then having separate x, y, z, fingers, etc. copies in our priv data. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: round down when spreading adjescent fingers ↵Hans de Goede
over 2 points This fixes 2 fingers at the same height or width on the touchpad getting reported at different y / x coordinates. Note num_bits is always at least 1. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: fix counting of high point bitsHans de Goede
alps_process_bitmap was resetting the point bit-count as soon as it saw 2 0 bits in a row. This means that unless the high point actually is at the end of the bitmap, it would always get its num_bits set to 0. Instead reset num_bits to 0 on a 0->1 transition, so that with > 2 fingers we only count the number of bits occupied by the highest finger. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: add alps_get_bitmap_points() helper functionHans de Goede
Factor out the identical code for getting the bitmap points for x and y into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: don't invert the Y-axis on RushmoreHans de Goede
Rushmore models don't have the Y-axis data in the bitmap inverted. Since we now have 2 different Y orientations, make the Y bitmap data processing use a forward loop like the X bitmap data processing, unifying the 2, and invert the data later, except on Rushmore. So far no-one has noticed this because the synaptics driver only uses the non mt coordinates (except on clickpads, and there are no alps clickpads using process_bitmap). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - improve 2-finger reporting on v3 modelsHans de Goede
V3 models only report mt bitmap data when there are 2 or more fingers on the touchpad. So always generate 2 positions in alps_process_bitmap, and for v3 models only fall back to st data when there was no mt data in a mt packet (which should never happen). This fixes 2 finger scrolling not working when using 2 fingers close to each other. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - fix rushmore packet decodingYunkang Tang
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: soc_button_array - add missing memory allocation checkPramod Gurav
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires
wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - keep wacom_ids orderedBenjamin Tissoires
No Functional changes, just some reordering. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>