summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2021-02-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22Merge branch 'devel-stable' into for-linusRussell King
2021-02-21Merge tag 'sound-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done. Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too. Below lists up some highlight: ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support" * tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits) ALSA: hda: intel-dsp-config: add Alder Lake support ASoC: soc-pcm: fix hw param limits calculation for multi-DAI ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: soc-pcm: fix hwparams min/max init for dpcm ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10 ALSA: hda: Add another CometLake-H PCI ID ASoC: soc-pcm: add soc_pcm_hw_update_format() ASoC: soc-pcm: add soc_pcm_hw_update_chan() ASoC: soc-pcm: add soc_pcm_hw_update_rate() ASoC: wm_adsp: Remove unused control callback structure ASoC: SOF: relax ABI checks and avoid unnecessary warnings ASoC: codecs: lpass-tx-macro: add dapm widgets and route ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: codecs: lpass-rx-macro: add dapm widgets and route ...
2021-02-20Merge tag 'tty-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver changes for 5.12-rc1. Nothing huge, just lots of good cleanups and additions: - n_tty line discipline cleanups - vt core cleanups and reworks to make the code more "modern" - stm32 driver additions - tty led support added to the tty core and led layer - minor serial driver fixups and additions All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: core: Remove BUG_ON(in_interrupt()) check vt_ioctl: Remove in_interrupt() check dt-bindings: serial: imx: Switch to my personal address vt: keyboard, use new API for keyboard_tasklet serial: stm32: improve platform_get_irq condition handling in init_port serial: ifx6x60: Remove driver for deprecated platform tty: fix up iterate_tty_read() EOVERFLOW handling tty: fix up hung_up_tty_read() conversion tty: fix up hung_up_tty_write() conversion tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer serial: remove sirf prima/atlas driver serial: mxs-auart: Remove <asm/cacheflush.h> serial: mxs-auart: Remove serial_mxs_probe_dt() serial: fsl_lpuart: Use of_device_get_match_data() dt-bindings: serial: renesas,hscif: Add r8a779a0 support tty: serial: Drop unused efm32 serial driver ...
2021-02-17Merge tag 'asoc-v5.12' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
2021-02-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Nothing terribly interesting, just a few fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - sync supported devices with fork on GitHub Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table Input: goodix - add support for Goodix GT9286 chip dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC dt-bindings: input: adc-keys: clarify description Input: ili210x - implement pressure reporting for ILI251x Input: i8042 - unbreak Pegatron C15B Input: st1232 - wait until device is ready before reading resolution Input: st1232 - do not read more bytes than needed Input: st1232 - fix off-by-one error in resolution handling
2021-02-02amba: Make the remove callback return voidUwe Kleine-König
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2021-02-01ARM: 9049/1: locomo: make locomo bus's remove callback return voidUwe Kleine-König
The driver core ignores the return value of struct bus_type::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct locomo_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-02-01ARM: 9048/1: sa1111: make sa1111 bus's remove callback return voidUwe Kleine-König
The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct sa1111_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-01-26isa: Make the remove callback for isa drivers return voidUwe Kleine-König
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value. Adapt all isa_drivers with a remove callbacks accordingly; they all return 0 unconditionally anyhow. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/ Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/ Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/ Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-24Input: xpad - sync supported devices with fork on GitHubBenjamin Valentin
There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-21Merge branch 'tty-splice' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into tty-next Fixes both the "splice/sendfile to a tty" and "splice/sendfile from a tty" regression from 5.10. * 'tty-splice' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer tty: implement write_iter
2021-01-20tty: convert tty_ldisc_ops 'read()' function to take a kernel pointerLinus Torvalds
The tty line discipline .read() function was passed the final user pointer destination as an argument, which doesn't match the 'write()' function, and makes it very inconvenient to do a splice method for ttys. This is a conversion to use a kernel buffer instead. NOTE! It does this by passing the tty line discipline ->read() function an additional "cookie" to fill in, and an offset into the cookie data. The line discipline can fill in the cookie data with its own private information, and then the reader will repeat the read until either the cookie is cleared or it runs out of data. The only real user of this is N_HDLC, which can use this to handle big packets, even if the kernel buffer is smaller than the whole packet. Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-11Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_tableSouptick Joarder
Kernel test robot throws below warning -> >> drivers/input/misc/ariel-pwrbutton.c:152:35: warning: unused variable >> 'ariel_pwrbutton_id_table' [-Wunused-const-variable] static const struct spi_device_id ariel_pwrbutton_id_table[] = { ^ 1 warning generated. Remove unused variable ariel_pwrbutton_id_table[] if no plan to use it further. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/1608581041-4354-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-09Input: goodix - add support for Goodix GT9286 chipAngeloGioacchino Del Regno
The Goodix GT9286 is a capacitive touch sensor IC based on GT1x. This chip can be found on a number of smartphones, including the F(x)tec Pro 1 and the Elephone U. This has been tested on F(x)Tec Pro1 (MSM8998). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109135512.149032-2-angelogioacchino.delregno@somainline.org Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-03Input: ili210x - implement pressure reporting for ILI251xMarek Vasut
The ILI251x seems to report pressure information in the 5th byte of each per-finger touch data element. On the available hardware, this information has the values ranging from 0x0 to 0xa, which is also matching the downstream example code. Report pressure information on the ILI251x. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201224071238.160098-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-03Input: i8042 - unbreak Pegatron C15BAlexey Dobriyan
g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-01Input: st1232 - wait until device is ready before reading resolutionGeert Uytterhoeven
According to the st1232 datasheet, the host has to wait for the device to change into Normal state before accessing registers other than the Status Register. If the reset GPIO is wired, the device is powered on during driver probe, just before reading the resolution. However, the latter may happen before the device is ready, leading to a probe failure: st1232-ts 1-0055: Failed to read resolution: -6 Fix this by waiting until the device is ready, by trying to read the Status Register until it indicates so, or until timeout. On Armadillo 800 EVA, typically the first read fails with an I2C transfer error, while the second read indicates the device is ready. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-4-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-01Input: st1232 - do not read more bytes than neededGeert Uytterhoeven
st1232_ts_read_data() already reads ts->read_buf_len bytes (8 or 20 bytes) from the touchscreen controller. This was fine when it was used to read touch point coordinates only, but is overkill for reading the touchscreen resolution, which just needs 3 bytes. Optimize transfers by passing the wanted number of bytes. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-3-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-01Input: st1232 - fix off-by-one error in resolution handlingGeert Uytterhoeven
Before, the maximum coordinates were fixed to (799, 479) or (319, 479), depending on touchscreen controller type. The driver was changed to read the actual values from the touchscreen controller, but did not take into account the returned values are not the maximum coordinates, but the touchscreen resolution (e.g. 800 and 480). Fix this by subtracting 1. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-2-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...
2020-12-15Merge tag 'spi-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The big change this release has been some excellent work from Lukas Wunner which closes a bunch of holes in the cleanup paths for drivers, mainly introduced as a result of devm conversions causing bad interactions with the support SPI has for allocating the bus and driver data together. Together with some of the other work done it feels like we've turned the corner on several long standing pain points with the API. Summary: - Many cleanups around probe/remove and error handling from Lukas Wunner and Uwe Kleine-König, and further fixes around PM from Zhang Qilong. - Provide a mask for which bits of the mode can safely be configured by drivers and use that to fix an issue with the ADS7846 driver. - Documentation of the expected interactions between SPI and GPIO level chip select polarity configuration from H. Nikolaus Schaller, hopefully we're pretty much at the end of sorting out the interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus Walleij for this. - DMA support for Allwinner sun6i controllers. - Support for Canaan K210 Designware implementations and Intel Adler Lake" * tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors spi: Limit the spi device max speed to controller's max speed spi: spi-geni-qcom: Use the new method of gpio CS control platform/chrome: cros_ec_spi: Drop bits_per_word assignment platform/chrome: cros_ec_spi: Don't overwrite spi::mode spi: dw: Add support for the Canaan K210 SoC SPI spi: dw: Add support for 32-bits max xfer size dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller spi: Update DT binding docs to support SiFive FU740 SoC spi: atmel-quadspi: Fix use-after-free on unbind spi: npcm-fiu: Disable clock in probe error path spi: ar934x: Don't leak SPI master in probe error path spi: mt7621: Don't leak SPI master in probe error path spi: mt7621: Disable clock in probe error path media: netup_unidvb: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: gpio: Don't leak SPI master in probe error path spi: spi-mtk-nor: Don't leak SPI master in probe error path spi: mxic: Don't leak SPI master in probe error path ...
2020-12-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.11 merge window.
2020-12-14Input: da7280 - fix spelling mistake "sequemce" -> "sequence"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201214223109.82924-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-14Input: cyapa_gen6 - fix out-of-bounds stack accessArnd Bergmann
gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for cm109 stomping on its own control URB if it tries to toggle buzzer immediately after userspace opens input device (found by syzcaller) - another fix for Raydium touchscreens that do not like splitting command transfers - quirks for i8042, soc_button_array, and goodix drivers to make them work better with certain hardware. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - add upside-down quirk for Teclast X98 Pro tablet Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list Input: raydium_ts_i2c - do not split tx transactions
2020-12-11Input: sc27xx - add support for sc2730 and sc2721Nemo Han
Add new compatible strings and match data to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by: Nemo Han <nemo.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: stmpe - add axis inversion and swapping capabilityStefan Riedmueller
Make use of generic touchscreen_properties structure to add axis inversion and swapping capabilities. It's configurable via devicetree properties: touchscreen-inverted-x touchscreen-inverted-y touchscreen-swapped-x-y Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/20200922093903.157232-1-s.riedmueller@phytec.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: goodix - add upside-down quirk for Teclast X98 Pro tabletSimon Beginn
The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: cm109 - do not stomp on control URBDmitry Torokhov
We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: adp5589-keys - do not explicitly control IRQ for wakeupDmitry Torokhov
If device is set up as a wakeup source, I2C core configures the interrupt line as wake IRQ and PM core automatically configures it for waking up the system on system suspend transition, so we do not have to explicitly call enable_irq_wake() and disable_irq_wake() in suspend/resume. Link: https://lore.kernel.org/r/20201120073920.3214492-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: adp5589-keys - do not unconditionally configure as wakeup sourceDmitry Torokhov
We should not be configuring the controller as a wakeup source in the driver, but rather rely on I2C core to mark it as such by either instantiating as I2C_CLIENT_WAKEUP or specifying "wakeup-source" device property. Link: https://lore.kernel.org/r/20201120073920.3214492-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: ipx4xx-beeper - convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085032.2598-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: parkbd - convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084957.2540-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: new da7280 haptic driverRoy Im
Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>. Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: elantech - fix protocol errors for some trackpoints in SMBus modejingle.wu
There are some version of Elan trackpads that send incorrect data when in SMbus mode, unless they are switched to use 0x5f reports instead of standard 0x5e. This patch implements querying device to retrieve chips identifying data, and switching it, when needed to the alternative report. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071531.32413-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: elan_i2c - add new trackpoint report type 0x5FJingle Wu
The 0x5F is a new trackpoint report type used by some modules. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071511.32349-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: elants - document some registers and valuesMichał Mirosław
Add information found in downstream kernels, to make the code less magic. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/728fff020bc92be10d84cc2a7ea8af6fd99af96c.1607669375.git.mirq-linux@rere.qmqm.pl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: atmel_mxt_ts - simplify the return expression of ↵Zheng Yongjun
mxt_send_bootloader_cmd() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135943.1612-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: imx_keypad - add COMPILE_TEST supportAnson Huang
Add COMPILE_TEST support to imx_keypad driver for better compile testing coverage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1583137573-16628-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: applespi - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Tested-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20200227124534.23399-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: synaptics-rmi4 - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Link: https://lore.kernel.org/r/20200227130336.27042-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: ad7877 - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Link: https://lore.kernel.org/r/20200228104508.15564-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: edt-ft5x06 - consolidate handling of number of electrodesDmitry Torokhov
Instead of special-casing retrieval of number of X/Y electrodes based on the firmware, let's select default values and mark registers as non-existent on firmwares that do not support this operation. Also mark "report rate" register as non-existent for generic firmwares as having it set to 0 does not make sense. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Simon Budig <simon.budig@kernelconcepts.de> Link: https://lore.kernel.org/r/X9FZFs3NZADoIhhH@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Merge series "spi: spi-geni-qcom: Use gpio descriptors for CS" from Stephen ↵Mark Brown
Boyd <swboyd@chromium.org>: Collected patches from the two series below and associated tags so they can be merged in one pile through the spi tree. Merry December! SPI: https://lore.kernel.org/r/20201202214935.1114381-1-swboyd@chromium.org cros-ec: https://lore.kernel.org/r/20201203011649.1405292-1-swboyd@chromium.org Cc: Akash Asthana <akashast@codeaurora.org> Cc: Simon Glass <sjg@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Stephen Boyd (3): platform/chrome: cros_ec_spi: Don't overwrite spi::mode platform/chrome: cros_ec_spi: Drop bits_per_word assignment spi: spi-geni-qcom: Use the new method of gpio CS control drivers/platform/chrome/cros_ec_spi.c | 2 -- drivers/spi/spi-geni-qcom.c | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) base-commit: b65054597872ce3aefbc6a666385eabdf9e288da -- https://chromeos.dev
2020-12-09Input: i8042 - add Acer laptops to the i8042 reset listChris Chiu
The touchpad operates in Basic Mode by default in the Acer BIOS setup, but some Aspire/TravelMate models require the i8042 to be reset in order to be correctly detected. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20201207071250.15021-1-chiu@endlessos.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: tm2-touchkey - add vddio regulatorStephan Gerhold
The Samsung touchkey controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Implement support for a "vddio-supply" that is enabled by the tm2-touchkey driver so that the regulator gets enabled when needed. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201203131242.44397-3-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: cyapa - switch to using devm_add_action_or_reset()Fuqian Huang
devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/linux-input/20190708123323.11943-1-huangfq.daxian@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: cros_ec_keyb - send 'scancodes' in addition to key eventsDmitry Torokhov
To let userspace know what 'scancodes' should be used in EVIOCGKEYCODE and EVIOCSKEYCODE ioctls, we should send EV_MSC/MSC_SCAN events in addition to EV_KEY/KEY_* events. The driver already declared MSC_SCAN capability, so it is only matter of actually sending the events. Link: https://lore.kernel.org/r/X87aOaSptPTvZ3nZ@google.com Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: add driver for power button on Dell Wyse 3020Lubomir Rintel
This adds support for the power button attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. The Embedded Controller's SPI interface is actually capable sending and receiving the PS/2 keyboard and mouse protocol data, which looks like a good fit for a serio driver. Howerver, I don't know of any machines where this is actually used. My board only has a single power button and no way to connect an actual keyboard or a mouse. Using the atkbd driver with serio would be an overkill and would be inconvenient for the userspace. Therefore this driver registers an input device that is only capable of reporting the power button presses and releases. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 09:57:46 +0000