summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2014-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "The main change is to fix breakage in Elantech driver introduced by the recent commit adding trackpoint reporting to protocol v4. Now we are trusting the hardware to advertise the trackpoint properly and do not try to decode the data as trackpoint if firmware told us it is not present" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - use proper endpoint type Input: elantech - trust firmware about trackpoint presence Input: synaptics - adjust min/max on Thinkpad E540
2014-11-25Input: xpad - use proper endpoint typeGreg Kroah-Hartman
The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-25Input: elantech - trust firmware about trackpoint presenceDmitry Torokhov
Only try to parse data as coming from trackpoint if firmware told us that trackpoint is present. Fixes commit caeb0d37fa3e387eb0dd22e5d497523c002033d1 Reported-and-tested-by: Marcus Overhagen <marcus.overhagen@gmail.com> Reported-and-tested-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-16Input: synaptics - adjust min/max on Thinkpad E540Ben Sagal
The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Cc: stable@vger.kernel.org Signed-off-by: Binyamin Sagal <bensagal@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Mostly small fixups to PS/2 tochpad drivers (ALPS, Elantech, Synaptics) to better deal with specific hardware" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - update the documentation Input: elantech - provide a sysfs knob for crc_enabled Input: elantech - report the middle button of the touchpad Input: alps - ignore bad data on Dell Latitudes E6440 and E7440 Input: alps - allow up to 2 invalid packets without resetting device Input: alps - ignore potential bare packets when device is out of sync Input: elantech - fix crc_enabled for Fujitsu H730 Input: elantech - use elantech_report_trackpoint for hardware v4 too Input: twl4030-pwrbutton - ensure a wakeup event is recorded. Input: synaptics - add min/max quirk for Lenovo T440s
2014-11-13Input: elantech - provide a sysfs knob for crc_enabledUlrik De Bie
The detection of crc_enabled is known to fail for Fujitsu H730. A DMI blacklist is added for that, but it can be expected that other laptops will pop up with this. Here a sysfs knob is provided to alter the behaviour of crc_enabled. Writing 0 or 1 to it sets the variable to 0 or 1. Reading it will show the crc_enabled variable (0 or 1). Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - report the middle button of the touchpadUlrik De Bie
In the past, no elantech was known with 3 touchpad mouse buttons. Fujitsu H730 is the first known elantech with a middle button. This commit enables this middle button. For backwards compatibility, the Fujitsu is detected via DMI, and only for this one 3 buttons will be announced. Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: alps - ignore bad data on Dell Latitudes E6440 and E7440Pali Rohár
Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: alps - allow up to 2 invalid packets without resetting devicePali Rohár
On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte in 6 bytes ALPS packet. In this case psmouse driver enter out of sync state. It looks like that all other bytes in packets are valid and also device working properly. So there is no need to do full device reset, just need to wait for byte which match condition for first byte (start of packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is small. This patch increase number of invalid bytes to size of 2 ALPS packets which psmouse driver can drop before do full reset. Resetting ALPS devices take some time and when doing reset on some Dell laptops touchpad, trackstick and also keyboard do not respond. So it is better to do it only if really necessary. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: alps - ignore potential bare packets when device is out of syncPali Rohár
5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - fix crc_enabled for Fujitsu H730Ulrik De Bie
The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - use elantech_report_trackpoint for hardware v4 tooUlrik De Bie
The Fujitsu H730 has hardware v4 with a trackpoint. This enables the elantech_report_trackpoint for v4. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: twl4030-pwrbutton - ensure a wakeup event is recorded.NeilBrown
This button is treated as a wakeup source, so we need to initialise it correctly. Without the device_init_wakeup() call, dev->power.wakeup will be NULL, and pm_wakeup_event() will do nothing. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-06Input: synaptics - add min/max quirk for Lenovo T440sTakashi Iwai
The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748 Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-10-31Revert "Input: i8042 - disable active multiplexing by default"Dmitry Torokhov
This reverts commit 68da166491655bc54051bf04c78ce648e2e33508. It turns out that the assertion about scope of regressions due to always keeping keyboard controller in legacy mode was proven wrong. There are laptops, such as Clevo W650SH, that only have internal touchpad (no external PS/2 ports), that require active multiplexing mode to switch the touchpad (Elantech) into native mode instead of basic PS/2 emulation. Reported-by: Roel Aaij <roel.aaij@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Input: altera_ps2 - use correct type for irq return valueTobias Klauser
The irq function altera_ps2_rxint returns an irqreturn_t, so use the same type for variable storing the return value. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Input: altera_ps2 - write to correct register when disabling interruptsTobias Klauser
In altera_ps2_close, the data register (offset 0) is written instead of the control register (offset 4), leading to the RX interrupt not being disabled. Fix this by calling writel() with the offset for the proper register. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Input: max77693-haptic - fix potential overflowDmitry Torokhov
Expression haptic->pwm_dev->period * haptic->magnitude is of type 'unsigned int' and may overflow. We need to convert one of the operands to u64 before multiplying, instead of casting result (potentially overflown) to u64. Reported by Coverity: CID 1248753 Acked-by : Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: psmouse - remove unneeded check in psmouse_reconnect()Dmitry Torokhov
psmouse_reconnect() will not be called if psmouse driver is not bound to the serio port, so there is no point in checking that. Also, as coded, it introduces potential NULL dereference in psmouse_dbg() in case psmouse is indeed NULL. Let's just remove it. Detected by Coverity: CID 146528 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: vsxxxaa - fix code dropping bytes from queueDmitry Torokhov
I believe the intent of the code was to drop oldest bytes from the queue, not the latest if we drop one byte and both latest and some oldest of we are dropping more than one. Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()Dmitry Torokhov
Coverity pointed out that at return point error is always 0 so the conditional is not needed. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: opencores-kbd - fix error handlingDmitry Torokhov
When I was adjusting patch in 848d479361793edb79aa68140cb64d4ec9032d88 to use devm_ioremap_resource() I messed it up. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: wm97xx - adapt parameters to tosa touchscreen.Dmitry Eremin-Solenikov
Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544Hans de Goede
These models need i8042.notimeout, otherwise the touchpad will not work. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: stmpe-keypad - fix valid key line bitmaskLinus Walleij
The bitmask comment says it will enable GPIO 8-14 and 16-20 for keypad use, but it actually enables GPIO 8-11 and 13-20 due to a bit error. Instead of masking of the "hole" at GPIO 12 (which is used for keypad output 4) mask of the proper "hole" at GPIO 15. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: soc_button_array - update calls to gpiod_get*()Alexandre Courbot
Add the new flags argument to calls of (devm_)gpiod_get*(). Currently both forms (with or without the flags argument) are valid thanks to transitional macros in <linux/gpio/consumer.h>. These macros will be removed once all consumers are updated and the flags argument will become compulsory. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
2014-10-16Input: xpad - add Thrustmaster as Xbox 360 controller vendorTommi Rantala
Add Thrustmaster as Xbox 360 controller vendor. This is required for example to make the GP XID (044f:b326) gamepad work. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing WheelTommi Rantala
Add the USB ID for the Xbox 360 Thrustmaster Ferrari 458 Racing Wheel. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: max77693-haptic - fix state check in imax77693_haptic_disable()Jaewon Kim
The check to see whether the device is already disabled in max77693_haptic_disable() was inversed, this change corrects it. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backendChang Huaixin
xenkbd_disconnect_backend doesn't free grant table entry. This bug affects live migration. xenkbd_disconnect_backend uses gnttab_end_foreign_access_ref to handle grant table entry which doesn't really free an entry. Thus every time we do xenkbd_resume, grant table entry increses by one. As an grant table entry occupies 8 bytes, an grant table page has at most 512 entries. Every 512 times we do xenkdb_resume, grant table pages increses by one. After around 3500 times of live migration, grant table pages will increase by 7, causing too many pages to populate and hitting max_pages limit when assigning pages.Thus assign_pages will fail, so will live migration. Signed-off-by: Chang Huaixin <huaixin.chx@alibaba-inc.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-15Input: alps - fix v4 button press recognitionAndreas Bosch
Since the change to struct input_mt_pos some variables are now bitfields instead of integers. Automatic conversion from integer to bitfield entry destroys information, therefore enforce boolean interpretation instead. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1114768 Fixes: 02d04254a5df ("Input: alps - use struct input_mt_pos to track coordinates") Signed-off-by: Andreas Bosch <linux@progandy.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-15Merge tag 'mfd-for-linus-3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...
2014-10-14input: edt-ft5x06: replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-11Merge tag 'stable/for-linus-3.18-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from David Vrabel: "Features and fixes: - Add pvscsi frontend and backend drivers. - Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses. - Try and keep memory contiguous during PV memory setup (reduces SWIOTLB usage). - Allow front/back drivers to use threaded irqs. - Support large initrds in PV guests. - Fix PVH guests in preparation for Xen 4.5" * tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits) xen: remove DEFINE_XENBUS_DRIVER() macro xen/xenbus: Remove BUG_ON() when error string trucated xen/xenbus: Correct the comments for xenbus_grant_ring() x86/xen: Set EFER.NX and EFER.SCE in PVH guests xen: eliminate scalability issues from initrd handling xen: sync some headers with xen tree xen: make pvscsi frontend dependant on xenbus frontend arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options xen-scsifront: don't deadlock if the ring becomes full x86: remove the Xen-specific _PAGE_IOMAP PTE flag x86/xen: do not use _PAGE_IOMAP PTE flag for I/O mappings x86: skip check for spurious faults for non-present faults xen/efi: Directly include needed headers xen-scsiback: clean up a type issue in scsiback_make_tpg() xen-scsifront: use GFP_ATOMIC under spin_lock MAINTAINERS: Add xen pvscsi maintainer xen-scsiback: Add Xen PV SCSI backend driver xen-scsifront: Add Xen PV SCSI frontend driver xen: Add Xen pvSCSI protocol description xen/events: support threaded irqs for interdomain event channels ...
2014-10-11Input: i8042 - disable active multiplexing by defaultDmitry Torokhov
Active multiplexing is a nice feature as it allows several pointing devices (such as touchpad and external mouse) use their native protocols at the same time. Unfortunately many manufacturers do not implement the feature properly even though they advertise it. The problematic implementations are never fixed, since Windows by default does not use this mode, and move from one BIOS/model of laptop to another. When active multiplexing is broken turning it on usually results in touchpad, keyboard, or both unresponsive. With PS/2 usage on decline (most of PS/2 devices in use nowadays are internal laptop touchpads), I expect number of users who have laptops with working MUX implementation, docking stations with external PS/2 ports, and who are still using external PS/2 mice, to be rather small. Let's flip the default to be OFF and allow activating it through i8042.nomux=0 kernel option. We'll also keep DMI table where we can record known good models. Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Input: i8042 - add noloop quirk for Asus X750LNHans de Goede
Without this the aux port does not get detected, and consequently the touchpad will not work. https://bugzilla.redhat.com/show_bug.cgi?id=1110011 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Input: synaptics - gate forcepad support by DMI checkDmitry Torokhov
Unfortunately, ForcePad capability is not actually exported over PS/2, so we have to resort to DMI checks. Cc: stable@vger.kernel.org Reported-by: Nicole Faerber <nicole.faerber@kernelconcepts.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Merge tag 'v3.17' into nextDmitry Torokhov
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
2014-10-09Input: Add Microchip AR1021 i2c touchscreenChristian Gmeiner
This patch adds support for the ar1021 i2c based touchscreen. The driver is quite simple and only supports the Touch Reporting Protocol. This is the final version for an RFC patch send a while ago. http://www.spinics.net/lists/linux-input/msg29419.html Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-09Input: cros_ec_keyb - add of match tableSjoerd Simons
To enable the cros_ec_keyb driver to be auto-loaded when build as module add an of match table (and export it) to match the modalias information passed on to userspace as the Cros EC MFD driver registers the MFD subdevices with an of_compatibility string. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-09Input: serio - avoid negative serio device numbersRichard Leitner
Fix the format string for serio device name generation to avoid negative device numbers when the id exceeds the maximum signed integer value. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-09Input: avoid negative input device numbersRichard Leitner
Fix the format string for input device name generation to avoid negative device numbers when the id exceeds the maximum signed integer value. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-08Input: automatically set EV_ABS bit in input_set_abs_paramsDmitry Torokhov
Let's automatically set EV_ABS bit in device's event type list when calling input_set_abs_params() so that drivers do not have to do it explicitly. These calls are never in a hot paths so we won't lose much time by setting the same bit several times. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-07Input: adp5588-keys - cancel workqueue in failure pathPramod Gurav
In case we start with the device not fully quiesced we should make sure we cancel the workqueue after freeing interrupt. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-07Input: opencores-kbd - switch to using managed resourcesPramod Gurav
This change switch to managed resources to simplifies error handling and module unloading and does away with platform_driver remove function. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-07Input: evdev - fix EVIOCG{type} ioctlDmitry Torokhov
The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-06mfd: cros_ec: stop calling ->cmd_xfer() directlyAndrew Bresticker
Instead of having users of the ChromeOS EC call the interface-specific cmd_xfer() callback directly, introduce a central cros_ec_cmd_xfer() to use instead. This will allow us to put all the locking and retry logic in one place instead of duplicating it across the different drivers. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:57:26 +0000