summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add() Input: cy8ctmg110 - capacitive touchscreen support Input: keyboard - also match braille-only keyboards Input: adp5588-keys - export unused GPIO pins Input: xpad - add product ID for Hori Fighting Stick EX2 Input: adxl34x - fix leak and use after free Input: samsung-keypad - Add samsung keypad driver Input: i8042 - reset keyboard controller wehen resuming from S2R Input: synaptics - set min/max for finger width Input: synaptics - only report width on hardware that supports it Input: evdev - signal that device is writable in evdev_poll() Input: mousedev - signal that device is writable in mousedev_poll() Input: change input handlers to use bool when possible Input: document the MT event slot protocol Input: introduce MT event slots Input: usbtouchscreen - implement reset_resume Input: usbtouchscreen - implement runtime power management Input: usbtouchscreen - implement basic suspend/resume Input: Add ATMEL QT602240 touchscreen driver Input: fix signedness warning in input_set_keycode() ...
2010-08-04Merge branch 'master' into for-nextJiri Kosina
2010-08-02Merge branch 'next' into for-linusDmitry Torokhov
2010-08-02Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()Dmitry Torokhov
The kpad structure is assigned to i2c client via i2s_set_clientdata() at the end of adp5588_probe(), but in adp5588_gpio_add() we tried to access it (via dev_get_drvdata! which is not nice at all) causing an oops. Let's pass pointer to kpad directly into adp5588_gpio_add() and adp5588_gpio_remove() to avoid accessing driver data before it is set up. Also split out building of gpiomap into a separate function to clear the logic. Reported-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-31Input: cy8ctmg110 - capacitive touchscreen supportSamuli Konttila
Add support for the cy8ctmg110 capacitive touchscreen used on some embedded devices. (Some clean up by Alan Cox) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-26Input: adp5588-keys - export unused GPIO pinsXiaolong Chen
This patch allows exporting GPIO pins not used by the keypad itself to be accessible from elsewhere. Signed-off-by: Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-26Input: xpad - add product ID for Hori Fighting Stick EX2Chris Merrett
Signed-off-by: Chris Merrett <chrisfu@hardc0re.org.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-22Input: adxl34x - fix leak and use after freeDan Carpenter
These are a couple smatch issues. In the original code, if only one of the allocation fails we leak the other variable so we should goto out_free_mem. Also there was a use after free if debugging was enabled and so I moved the kfree() down a line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - relax capability ID checks on newer hardware Input: twl40300-keypad - fix handling of "all ground" rows Input: gamecon - reference correct pad in gc_psx_command() Input: gamecon - reference correct input device in NES mode Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Input: qt2160 - rename kconfig symbol name
2010-07-21Input: synaptics - relax capability ID checks on newer hardwareDmitry Torokhov
Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-21Input: samsung-keypad - Add samsung keypad driverJoonyoung Shim
This patch adds support for keypad driver running on Samsung cpus. This driver is tested on GONI and Aquila board using S5PC110 cpu. [ch.naveen@samsung.com: tested on SMDK6410, SMDKC100, and SMDKV210] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Naveen Krishna Ch <ch.naveen@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20Input: i8042 - reset keyboard controller wehen resuming from S2RDmitry Torokhov
Some laptops, such as Lenovo 3000 N100, require keyboard controller reset in order to have touchpad operable after suspend to RAM. Even if box does not need the reset it should be safe to do so, so instead of chasing after misbehaving boxes and grow DMI tables, let's reset the controller unconditionally. Reported-and-tested-by: Jerome Lacoste <jerome.lacoste@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20Input: twl40300-keypad - fix handling of "all ground" rowsDmitry Torokhov
The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20Input: gamecon - reference correct pad in gc_psx_command()Dmitry Torokhov
Otherwise we won't see any events from the gamepad. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408 Reported-and-tested-by: Eugene Yudin <eugene.yudin@gmail.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20Input: gamecon - reference correct input device in NES modeDmitry Torokhov
We moved input devices from 'struct gc' to individial pads (struct gc-pad), but gc_nes_process_packet() was still trying to use old ones and crashing. Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-19Input: synaptics - set min/max for finger widthChris Bagwell
Reporting this will allow GUI config apps to correctly scale width sensitive config values (such as palm detect) to correct range. Current user apps are detecting kernels min/max=0/0 and making an assumption that it means 0/16 or 0/15. Synaptics touchpad interface guides show 4/15 are correct values but driver forces to 0 when no fingers on touchpad. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-19Input: synaptics - only report width on hardware that supports itChris Bagwell
Synaptics devices report fixed value of 5 for finger/palm widths on devices that do not support capability and driver further hardcodes to 5. Stop reporting this fixed value when its not supported since its not useful. This will aid applications so they can better auto-enable support for multi-touch emulation and palm detection logic using finger width only for devices that support width detection. I can find no applications that currently require existence on ABS_TOOL_WIDTH. Since only synaptics and bcm input devices currently support this tool, it seems they must handle it gracefully. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-19Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'Wan ZongShun
The name of platfrom device was changed and we need to make driver's name match in order for it to bind to the device. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-19Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_tableKamal Mostafa
Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up i8042 and breaking the touchpad. Add this model to i8042_dmi_noloop_table[] to resolve. BugLink: https://bugs.launchpad.net/bugs/580664 Signed-off-by: Kamal Mostafa <kamal@canonical.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-17Input: qt2160 - rename kconfig symbol nameChristoph Fritz
drivers/input/keyboard/Kconfig defines QT2160 while the corresponding Makefile expects CONFIG_KEYBOARD_QT2160 as all other keyboard drivers do. To keep this Makefile consistent rename the config-token from CONFIG_QT2160 to CONFIG_KEYBOARD_QT2160. The various defconfig files are left alone. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: w90p910_ts - fix call to setup_timer() Input: synaptics - fix wrong dimensions check Input: i8042 - mark stubs in i8042.h "static inline"
2010-07-15Input: evdev - signal that device is writable in evdev_poll()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: mousedev - signal that device is writable in mousedev_poll()Julien Moutinho
The Microsoft ImPS/2 mouse protocol being bidirectionnal (sic) one may have to write in /dev/input/mice; and that works better if select() does not hang. Signed-off-by: Julien Moutinho <julm+linux@savines.alpes.fr.eu.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: change input handlers to use bool when possibleDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: introduce MT event slotsHenrik Rydberg
With the rapidly increasing number of intelligent multi-contact and multi-user devices, the need to send digested, filtered information from a set of different sources within the same device is imminent. This patch adds the concept of slots to the MT protocol. The slots enumerate a set of identified sources, such that all MT events can be passed independently and selectively per identified source. The protocol works like this: Instead of sending a SYN_MT_REPORT event immediately after the contact data, one sends an ABS_MT_SLOT event immediately before the contact data. The input core will only emit events for slots with modified MT events. It is assumed that the same slot is used for the duration of an initiated contact. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: w90p910_ts - fix call to setup_timer()Wan ZongShun
No need to take address, w90p910_ts is already a pointer. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: usbtouchscreen - implement reset_resumeOliver Neukum
This implements reset_resume() by splitting init into allocations of private data structures and device initializations. Device initializations are repeated upon reset_resume. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Petr Štetiar <ynezz@true.cz> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: usbtouchscreen - implement runtime power managementOliver Neukum
This implement USB autosuspend while the device is opened for devices that do remote wakeup with a fallback to open/close for those devices that don't. Devices that require the host to constantly poll them are never autosuspended. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Petr Štetiar <ynezz@true.cz> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: usbtouchscreen - implement basic suspend/resumeOliver Neukum
This implements basic support for suspend & resume. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Petr Štetiar <ynezz@true.cz> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Input: Add ATMEL QT602240 touchscreen driverJoonyoung Shim
The chip's full name is AT42QT602240 or ATMXT224. This is a capacitive touchscreen supporting 10-contact multitouch and using I2C interface. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Input: synaptics - fix wrong dimensions checkTakashi Iwai
The commit 83ba9ea8a04b72dfee2515428c15e7414ba4fc61 ommitted the return line for the old synaptics model accidentally. This resulted in a wrong check, namely, the dimensions are checked for the old devices that don't support the query properly. This patch adds the return line back. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Input: fix signedness warning in input_set_keycode()Dmitry Torokhov
The dev->getkeycode() method expects unsigned argument. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Input: Add pwm beeper driverLars-Peter Clausen
This patch adds a simple driver which allows to use pwm based beepers (for example piezo elements) as a pcspkr-like device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-13Input: xpad - remove mouse buttons and axes for dance padsChristoph Fritz
Dance pads don't have any axes/sticks, only buttons for directions. For example buttons like left+right will get triggered at once, an axis can't handle this anyway. So this patch adds a module parameter named "sticks_to_null" for unknown devices. A known dance pad makes use of it by changing to a new mapping-option named DANCEPAD_MAP_CONFIG. Other tested devices may follow by adding this mapping-option too. Some buttons of xpad-devices are addressing mouse-buttons instead of gamepad-buttons. This gets fixed too. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-13Input: atlas_btns - switch to using pr_err() and friendsDmitry Torokhov
This ensures consistent prefixes on all messages emitted by the driver. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-13Input: atlas_btns - fix mixing acpi_status and int for return valueAxel Lin
To improve readability, this patch fixes mixing acpi_status and int for return value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-13Input: atlas_btns - adds a missing owner field for atlas_acpi_driverAxel Lin
The owner field provides the link between drivers and modules in sysfs. After setting the owner field, we can see which module provides which driver and vice versa by looking at /sys/bus/acpi/drivers/Atlas ACPI/module and /sys/module/atlas_btns/drivers/acpi:Atlas ACPI Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-08Input: twl4030-pwrbutton - replace __devinit with __initMarkus Lehtonen
Power button is not hot-pluggable so we can save some memory by using __init. Signed-off-by: Markus Lehtonen <markus.lehtonen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-07input: i8042 - add runtime check in x86's i8042_platform_initFeng Tang
Then it will first check x86_platforms's i8042 detection result, then go on with normal probe. Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <4c34dd482753bb8f1@agluck-desktop.sc.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-07Revert "Input: fixup X86_MRST selects"Feng Tang
This reverts commit 0b28bac5aef7bd1ab213723df031e61db9ff151a. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-5-git-send-email-feng.tang@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-07Revert "Input: do not force selecting i8042 on Moorestown"Feng Tang
This reverts commit 685afae02557a178185a4be36f58332976e79f63. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-4-git-send-email-feng.tang@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-04Input: mcs - Add MCS touchkey driverJoonyoung Shim
This adds support for MELPAS MCS5000/MSC5080 touch key controllers. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: release pressed keys when resuming deviceOliver Neukum
As the kernel has no way to know whether a key was released while the system was asleep, keys need to be reported released as the system is resumed, lest autorepeat set in. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ads7846 - extend the driver for ads7845 controller supportAnatolij Gustschin
ADS7845 is a controller for 5-wire touch screens and somewhat different from 7846. It requires three serial communications to accomplish one complete conversion. Unlike 7846 it doesn't allow Z1-/Z2- position measurement. The patch extends the ads7846 driver to also support ads7845. The packet struct is extended to contain needed command and conversion buffers. ads7846_rx() and ads7846_rx_val() now differentiate between 7845 and 7846 case. ads7846_probe() is modified to setup ads7845 specific command and conversion messages and to switch ads7845 into power-down mode, since this is needed to be prepared to respond to pendown interrupts. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ads7846 - do not allow altering platform dataDmitry Torokhov
Tested-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: adxl34 - make enable/disable separate from suspend/resumeDmitry Torokhov
Suspending and resuming the device should be separate from enabling and disabling it through sysfs attribute and thus should not alter ac->disabled flag. [michael.hennerich@analog.com: various fixups] Tested-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ad7879 - report EV_KEY/BTN_TOUCH eventsMichael Hennerich
Some input events users such as Android require BTN_TOUCH events. Implement EV_KEY/BTN_TOUCH and make sure that the release event is not erroneous scheduled without a preceding valid touch. Avoid duplicated BTN_TOUCH events, even though input core filters them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ad7879 - fix spi word size to 16 bitMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ad7879 - use i2c_smbus_read_i2c_block_data() to lower overheadMichael Hennerich
Avoid additional addressing overhead incurred by word_data transfers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 00:48:37 +0000