summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2010-07-03Input: ad7879 - add open and close methodsDmitry Torokhov
Tested-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ad7879 - split bus logic outMike Frysinger
The ad7879 driver is using the old bus method of only supporting one at a time (I2C or SPI). So refactor it like the other input drivers that support multiple busses simultaneously. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-30Input: ad7879 - use threaded IRQDmitry Torokhov
Tested-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-30Merge commit 'v2.6.35-rc3' into nextDmitry Torokhov
2010-06-28Input: lm8323 - fix error handling in lm8323_probe()Dan Carpenter
We reuse the "i" variable later on so if we goto fail3 or fail4 then "i" will be set to the wrong thing and cause a crash. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: gpio-keys - add gpiolib debounce supportGrazvydas Ignotas
gpiolib now has debounce support added in .35, so let's make use of it. This allows to use hardware GPIO debouncing on some platforms like OMAP. In case gpiolib debounce setup fails for some GPIO, the driver will fall back to timer based debouncing, which is what it used before. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: usbtouchscreen - add support for ET&T TC4UM touchscreen controllerPetr Štetiar
This patch adds support for the ET&T TC4UM 4-wire USB touchscreen controller and tries to reuse the bits for TC5UH controller in kernel already. Data interface is same. Tested-by: Roger Pueyo Centelles <rogerpueyo@rogerpueyo.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: ads7846 - allow specifying irq trigger type in platform dataAnatolij Gustschin
On some platforms, for example with GPIO interrupts on mpc5121, it is not possible to configure falling edge interrupts. Specifying irq trigger type in platform data structure allows using ads7846 driver on such platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: wacom - add support for DTU2231 and DTU1631Ping Cheng
Add support for the two new devices: DTU2231 and DTU1631. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: wistron_btns - fix a memory leak in wb_module_init error pathAxel Lin
select_keymap() calls copy_keymap() to allocate a memory for keymap. This patch adds a missing kfree(keymap) in wb_module_init error path. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-25Input: adxl34x - add support for ADXL346 orientation sensingMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-25Input: add driver for ADXL345/346 Digital AccelerometersMichael Hennerich
This is a driver for the ADXL345/346 Three-Axis Digital Accelerometers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-24Input: adp5588-keys - support GPI events for ADP5588 devicesXiaolong CHEN
A column or row configured as a GPI can be programmed to be part of the key event table and therefore also capable of generating a key event interrupt. A key event interrupt caused by a GPI follows the same process flow as a key event interrupt caused by a key press. GPIs configured as part of the key event table allow single key switches and other GPI interrupts to be monitored. As part of the event table, GPIs are represented by the decimal value 97 (0x61 or 1100001) through the decimal value 114 (0x72 or 1110010). See table below for GPI event number assignments for rows and columns. GPI Event Number Assignments for Rows Row0 Row1 Row2 Row3 Row4 Row5 Row6 Row7 97 98 99 100 101 102 103 104 GPI Event Number Assignments for Cols Col0 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 105 106 107 108 109 110 111 112 113 114 Signed-off-by: Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23Input: evdev - never leave the client buffer empty after writeHenrik Rydberg
When the client buffer is very small and wraps around a lot, it may well be that a write increases the head such that head == tail. If this happens between the point where a poll is triggered and the actual data is being read, there will be no data to read. This is confusing to applications, which might end up closing the file. This patch solves the problem by making sure the client buffer is never empty after writing to it. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23Input: bcm5974 - set the average number of events per MT event packetHenrik Rydberg
The MT devices produce a lot of data. Tell the underlying input device approximately how many events will be sent per synchronization, to allow for better buffering. The number is a template based on continuously reporting details for each finger on a single hand. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23Input: evdev - use driver hint to compute size of event bufferHenrik Rydberg
Some devices, in particular MT devices, produce a lot of data. This may lead to overflowing of the event queues in evdev driver, which by default are fairly small. Let the drivers hint the average number of events per packet generated by the device, and use that information when computing the buffer size evdev should use for the device. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23Input: evdev - convert to dynamic event bufferHenrik Rydberg
Allocate the event buffer dynamically, and prepare to compute the buffer size in a separate function. This patch defines the size computation to be identical to the current code, and does not contain any logical changes. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-23Input: tps6507x-ts - remove unneeded NULL testJiri Slaby
Stanse found that tsc is dereferenced earlier than checked for being NULL in tps6507x_ts_remove. Remove the test because there is no way for tsc to be NULL there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-22Input: wacom - fix serial number handling on Cintiq 21UX2Ping Cheng
Cintiq 21UX2 added 8 more bits for the tool serial number and more buttons for the expresskey. We did not enable them properly in the last patch. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-22Input: fixup X86_MRST selectsRandy Dunlap
Some of the recent X86_MRST additions make some "select"s conditional on X86_MRST but missed some related kconfig symbols, causing: drivers/built-in.o: In function `ps2_end_command': (.text+0x257ab2): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_end_command': (.text+0x257ae1): undefined reference to `i8042_unlock_chip' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b40): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b6f): undefined reference to `i8042_lock_chip' when SERIO_I8042=m, SERIO_LIBPS2=y, KEYBOARD_ATKBD=y. We need to make i8042 dependant upon !X86_MRST and allow deselecting atkbd on Moorestown even when !CONFIG_EMBEDDED. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-22Merge commit 'v2.6.35-rc3' into for-linusDmitry Torokhov
2010-06-16Merge branch 'master' into for-nextJiri Kosina
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-10Input: matrix_keypad - add support for clustered irqLuotao Fu
This one adds support of a combined irq source for the whole matrix keypad. This can be useful if all rows and columns of the keypad are e.g. connected to a GPIO expander, which only has one interrupt line for all events on every single GPIO. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-08hp_sdc_rtc: fix broken ioctl conversionArnd Bergmann
Commit 55929332c92 "drivers: Push down BKL into various drivers" introduced a regression in hp_sdc_rtc, caused by a missing change of the .unlocked_ioctl pointer to the newly introduced function. Fixes: drivers/input/misc/hp_sdc_rtc.c:681: warning: initialization from incompatible pointer type drivers/input/misc/hp_sdc_rtc.c:665: warning: ‘hp_sdc_rtc_unlocked_ioctl’ defined but not used Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-08Input: bcm5974 - turn wellspring mode off if failed to start trafficLuo Jinghua
If we fail to submit URBs we should take touchpad out of wellsping mode. Signed-off-by: Luo Jinghua <sunmoon1997@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-08Input: usbtouchscreen - reduce number fo be16_to_cpu conversionsDmitry Torokhov
Let's perform be16_to_cpu() conversions once for each received packet, and then use cached values. Makes code a little bit easier to follow. Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-08Input: ad7877 - fix spi word size to 16 bitOskar Schirmer
With no word size given in the users platform data, a generic spi host controller driver will assume a default word size of eight bit. This causes transmission to be performed bytewise, which will fail on little endian machines for sure. Failure on big endian depends on usage of slave select to mark word boundaries. Anyway, ad7877 is specified to work with 16 bit per word, so unconditionally set the word size accordingly. Flag an error where 16 bit per word is not available. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Oliver Schneidewind <osw@emlix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-05Input: pcf8574_keypad - fix off by one in pcf8574_kp_irq_handler()Dan Carpenter
If nextstate == ARRAY_SIZE(lp->btncode), then we read one past the end of the array on the next line. This fixes a smatch warning: drivers/input/misc/pcf8574_keypad.c +74 pcf8574_kp_irq_handler(8) error: buffer overflow 'lp->btncode' 17 <= 17 Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add Cintiq 21UX2 and Intuos4 WL Input: ads7846 - fix compiler warning in ads7846_probe() Input: tps6507x-ts - a couple work queue cleanups Input: s3c2410_ts - tone down logging Input: s3c2410_ts - fix build error due to ADC Kconfig rename
2010-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Make intc messages consistent via pr_fmt. sh: make sure static declaration on ms7724se sh: make sure static declaration on mach-migor sh: make sure static declaration on mach-ecovec24 sh: make sure static declaration on mach-ap325rxa clocksource: sh_cmt: compute mult and shift before registration clocksource: sh_tmu: compute mult and shift before registration sh: PIO disabling for x3proto and urquell. sh: mach-sdk7786: conditionally disable PIO support. sh: support for platforms without PIO. usb: r8a66597-hcd pio to mmio accessor conversion. usb: gadget: r8a66597-udc pio to mmio accessor conversion. usb: gadget: m66592-udc pio to mmio accessor conversion. sh: add romImage MMCIF boot for sh7724 and Ecovec V2 sh: add boot code to MMCIF driver header sh: prepare MMCIF driver header file sh: allow romImage data between head.S and the zero page sh: Add support MMCIF for ecovec sh: remove duplicated #include input: serio: disable i8042 for non-cayman sh platforms. ...
2010-06-04Input: i8042 - remove SPRUCE supportChristoph Egger
CONFIG_SPRUCE was removed from kernel around 2.6.26; let's remove the last remaining piece. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-04Input: wacom - add Cintiq 21UX2 and Intuos4 WLPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-03i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-02Input: ads7846 - fix compiler warning in ads7846_probe()Dmitry Torokhov
This patch fixes the follwing warning introduced by commit 067fb2f648543894ce775082c5636f4c32b99e4f ("Input: ads7846 - return error on regulator_get() failure"): drivers/input/touchscreen/ads7846.c: In function 'ads7846_probe': drivers/input/touchscreen/ads7846.c:1167: warning: format '%ld' expects type 'long int', but argument 4 has type 'int' Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-02Merge branch 'sh/iomap'Paul Mundt
2010-06-02Input: tps6507x-ts - a couple work queue cleanupsDan Carpenter
1) Use msecs_to_jiffies() instead of calculating by hand. 2) Call cancel_delayed_work_sync() instead of cancel_delayed_work() followed by a separate flush_workqueue(). 3) Remove the "tsc->wq = 0;" Sparse complains about that because tsc->wq is a pointer, not an int. It's not needed because we just free the pointer anyway. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-31Input: s3c2410_ts - tone down loggingMark Brown
The S3C touchscreen driver is logging at LOG_INFO on every stylus up event which spams the console needlessly. Reduce the priority of the message to debug level for some peace and quiet. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-31Input: s3c2410_ts - fix build error due to ADC Kconfig renameMark Brown
The name of the Kconfig symbol for the ADC has changed as a result of application to more SoCs but the select statement has not been updated, causing linker failures as the ADC core has not been built. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-28input: Touchscreen driver for TPS6507xTodd Fischer
Add touch screen input driver for TPS6507x family of multi-function chips. Uses the TPS6507x MFD driver. No interrupt support due to testing limitations of current hardware. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits) m68k: amiga - RTC platform device conversion m68k: amiga - Parallel port platform device conversion m68k: amiga - Serial port platform device conversion m68k: amiga - Mouse platform device conversion m68k: amiga - Keyboard platform device conversion m68k: amiga - Amiga Gayle IDE platform device conversion m68k: amiga - A4000T SCSI platform device conversion m68k/scsi: a3000 - Do not use legacy Scsi_Host.base m68k: amiga - A3000 SCSI platform device conversion m68k/scsi: gvp11 - Do not use legacy Scsi_Host.base m68k: amiga - GVP Series II SCSI zorro_driver conversion m68k/scsi: a2091 - Do not use legacy Scsi_Host.base m68k: amiga - A2091/A590 SCSI zorro_driver conversion m68k/scsi: mvme147 - Kill obsolete HOSTS_C logic m68k/scsi: a3000 - Kill a3000_scsiregs typedef m68k/scsi: gvp11 - Kill gvp11_scsiregs typedef m68k/scsi: a2091 - Kill a2091_scsiregs typedef m68k/scsi: gvp11 - Extract check_wd33c93() m68k/scsi: a3000 - Kill static global a3000_host m68k/scsi: mvme147 - Kill static global mvme147_host ...
2010-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: usbtouchscreen - support bigger iNexio touchscreens Input: ads7846 - return error on regulator_get() failure Input: twl4030-vibra - correct the power down sequence Input: enable onkey driver of max8925 Input: use ABS_CNT rather than (ABS_MAX + 1)
2010-05-27Input: s3c2410_ts - restore accidentially dropped s3c24xx idsVasily Khoruzhick
Without s3c24xx ids driver doesn't attach on s3c2410 and s3c244x Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26Input: usbtouchscreen - support bigger iNexio touchscreensOndrej Zary
Bigger Nexio touchscreens not only send more data but also the header values are modified somewhat. Fix the header (it's a guesswork but it works at least on one 46" touchscreen with 2.00SMS firmware) and also increase rept_size. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-26Input: ads7846 - return error on regulator_get() failureKevin Hilman
In probe(), if regulator_get() failed, an error code was not being returned causing the driver to be successfully bound, even though probe failed. This in turn caused the suspend, resume and remove methods to be registered and accessed via the SPI core. Since these functions all access private driver data using pointers that had been freed during the failed probe, this would lead to unpredictable behavior. This patch ensures that probe() returns an error code in this failure case so the driver is not bound. Found using lockdep and noticing the lock used in the suspend/resum path pointed to a bogus lock due to the freed memory. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-26m68k: amiga - Mouse platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-26m68k: amiga - Keyboard platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-25input: serio: disable i8042 for non-cayman sh platforms.Paul Mundt
The sh64 cayman platform is the only sh board that ships with an i8042, so we just hide it for all of the others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-22Input: twl4030-vibra - correct the power down sequencePeter Ujfalusi
It is better to turn off the first APLL, than the codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 21:25:33 +0000