summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2011-09-22[media] move ati_remote driver from input/misc to media/rcAnssi Hannula
The driver will be migrated to the RC driver API in a following commit. [mchehab@redhat.com: Fix some bad whitespacing] Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-20Input: gpio_keys - use of_property_read_u32()Tobias Klauser
Use the of_property_read_u32() helper function to retrieve u32 values from the device tree. Also do not pass the len parameter to of_get_property if it isn't checked afterwards. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - simplify unregister procedureDmitry Torokhov
Since touchscreen driver does not handle any events to be sent to the device we can close serio port first and then unregister the input device. Tested-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - rework handling of different protocolsDmitry Torokhov
Instead of having one large switch based on product ID use pointer to function actually doing protocol decoding. Tested-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 6250 supportJohn Sung
Add multi touch support for PenMount 6250 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 3000 supportJohn Sung
Add dual touch support for PenMount 3000 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 6000 supportJohn Sung
Add support for PenMount 6000 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - fix the protocolJohn Sung
The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: elantech - remove module parameter force_elantechJJ Ding
This essentially reverts commit f81bc788ff91d4efd4baf88b2c29713838caa8e5. With recent work on elantech driver, I believe we now have complete support for all elantech touchpads. So remove this hack. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: elantech - better support all those v2 variantsJJ Ding
V2 hardware has many variants. This patch adddresses two issues: - some model also has debounce packets, but with a different signature than v3. Now we just check debounce for all v2 hardware. - due to different scanning methods the hardware uses, x and y ranges have to be calculated differently. And for some specific versions, we can just see them as custom-made, so set {x, y} the same values as Windows driver does. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Tested-by: Richard Schütz <r.schtz@t-online.de> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-19Input: twl6040-vibra: Use accessor to get revision informationPeter Ujfalusi
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-16Merge branch 'for-linus' of git://github.com/dtor/inputLinus Torvalds
* 'for-linus' of git://github.com/dtor/input: Input: wacom - fix touch parsing on newer Bamboos Input: bcm5974 - add MacBookAir4,1 trackpad support Input: wacom - add POINTER and DIRECT device properties Input: adp5588-keys - remove incorrect modalias Input: cm109 - fix checking return value of usb_control_msg Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner Input: wacom - remove pressure for touch devices
2011-09-12Input: wacom - fix touch parsing on newer BamboosChris Bagwell
Bamboos with Product ID's > 0xD4 return values unrelated to pressure in touch 1 pressure field. They also report 2nd touch X/Y values shifted down 1 byte (where pressure was). This results in jumpy 1 finger touch and totally invalid 2nd finger data. For touch detection, switch to a Touch Present single bit that all versions of Bamboo support. For touch 2 offset, calculate offset based on a bit that is set different between the two packet layouts. Since touch pressure reports were removed from driver, there was no need to be reading pressure any more. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: bcm5974 - add MacBookAir4,1 trackpad supportPieter-Augustijn Van Malleghem
This patch adds trackpad support for the MacBookAir4,1, released in July 2011. It is very similar to the MacBookAir4,2 patch submitted by Joshua Dillon and Chase Douglas. Signed-off-by: Pieter-Augustijn Van Malleghem <p-a@scarlet.be> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - add v4 hardware supportJJ Ding
v4 hardware is a true multitouch capable touchpad (up to 5 fingers). The packet format is quite complex, please see protocol document for reference. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - add v3 hardware supportJJ Ding
v3 hardware's packet format is almost identical to v2 (one/three finger touch), except when sensing two finger touch, the hardware sends 12 bytes of data. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - clean up elantech_initJJ Ding
Group property setting code into elantech_set_properties. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - packet checking for v2 hardwareJJ Ding
For v2 hardware, there is no real parity check, but we can still check some constant bits for data integrity. Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make these packet checking function names consistent. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - remove ETP_EDGE_FUZZ_V2JJ Ding
Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges should be just the raw resolution of the device. Otherwise, they can cause underflow on the Y axis. Suggested-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - use firmware provided x, y rangesJJ Ding
With newer hardware, the touchpad provides range info. Let's use it. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - get rid of ETP_2FT_* in elantech.hJJ Ding
For two finger touches the coordinate of each finger gets reported separately but with reduced resolution. With this change, we now have the same range for ST and MT data and scale MT data because it has lower resolution to match ST. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: elantech - correct x, y value range for v2 hardwareJJ Ding
x, y values are actually 12-bit long. Also update protocol document to reflect the change. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Acked-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: twl6040-vibra - fix compiler warningRandy Dunlap
Fix warning from Geert's build summary emails by changing "if" to "ifdef". Thsi should fix the following: drivers/input/misc/twl6040-vibra.c:231:5: warning: "CONFIG_PM_SLEEP" is not defined Builds cleanly with CONFIG_PM_SLEEP enabled or disabled. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: tegra-kbc - tighten lockingDmitry Torokhov
Take spinlock when entering ISR and timer routine to ensure that we do not race while enabling/disabling FIFO interrupts. Also we do not need to take teh spinlock in tegra_kbc_startremove() since interrupt is completely disabled. Tested-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09Input: tegra-kbc - fix wakeup from suspendRakesh Iyer
For wakeup to be reliable, kbc needs to be in interrupt mode before suspend. Created common routine to control the FIFO interrupt. Added synchronization to ensure orderly suspend. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08Input: tc3589x-keypad - fix section mismatch warningHarvey Yang
WARNING: drivers/input/keyboard/built-in.o(.text+0xb55b): Section mismatch in reference from the function tc3589x_keypad_open() to the function .devinit.text:tc3589x_keypad_init_key_hardware() The function tc3589x_keypad_open() references the function __devinit tc3589x_keypad_init_key_hardware(). This is often because tc3589x_keypad_open lacks a __devinit annotation or the annotation of tc3589x_keypad_init_key_hardware is wrong. Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08Input: wacom - add POINTER and DIRECT device propertiesJason Gerecke
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Input: remove IRQF_DISABLED from driversYong Zhang
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Input: wacom - add Intuos4 LED and OLED controlEduard Hasenleithner
This commit enables control of the LEDs and OLED displays found on the Wacom Intuos4 M, L, and XL. For this purpose, a new "wacom_led" attribute group is added to the sysfs entry of the USB device. This "wacom_led" group only shows up when the correct device (M, L, or XL) is detected. The attributes are described in Documentation/ABI/testing/sysfs-wacom Signed-off-by: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Merge commit 'v3.1-rc4' into nextDmitry Torokhov
2011-08-26Input: adp5588-keys - remove incorrect modaliasAxel Lin
For i2c drivers, we should use "i2c:" prefix for modalias. MODULE_DEVICE_TABLE will setup the modulalias for us, thus adding a MODULE_ALIAS is redundant (in addition to being incorrect). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: tsc2007 - add open and close methodsDmitry Torokhov
This will ensure that the device delivers input events only when there are users. Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: tsc2007 - convert to threaded IRQDmitry Torokhov
Instead of using hard IRQ and workqueue solution switch to using threaded interrupt handler to simplify the code and locking rules. Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: cm109 - fix checking return value of usb_control_msgaxel lin
If successful, usb_control_msg returns the number of bytes transferred, otherwise a negative error number. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartnerJason Gerecke
The Wacom PenPartner should advertise its stylus tip and button in addition to the eraser tool. These are both physically present on the hardware, and emitted from 'wacom_penpartner_irq'. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: wacom - remove pressure for touch devicesPing Cheng
Touch devices do not report valid pressure or capacitance. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad714x - read the interrupt status registers in a row Input: ad714x - use DMA-safe buffers for spi_write() Input: ad714x - fix endianness issues Input: ad714xx-spi - force SPI bus into the default 8-bit mode Input: ep93xx_keypad - add missing include of linux/module.h Input: tnetv107x-ts - add missing include of linux/module.h Input: max11801_ts - correct license statement Input: atmel_mxt_ts - report pressure information from the driver Input: bcm5974 - Add support for newer MacBookPro8,2 Input: wacom - report id 3 returns 4 bytes of data Input: wacom - add WAC_MSG_RETRIES define Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K) Input: tegra-kbc - correct call to input_free_device Input: mpu3050 - correct call to input_free_device Input: bcm5974 - add support for touchpads found in MacBookAir4,2 Input: mma8450 - fix module device table type Input: remove CLOCK_TICK_RATE from analog joystick driver
2011-08-23Input: ad714x-i2c - change placement of __init/__exit annotationsWanlong Gao
Change the placement of __init and __exit annotations to be consistent with the rest of the drivers. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - process finger (<=5) transitionsDaniel Kurtz
Synaptics image sensor touchpads track up to 5 fingers, but only report 2. They use a special "TYPE=2" (AGM-CONTACT) packet type that reports the number of tracked fingers and which finger is reported in the SGM and AGM packets. With this new packet type, it is possible to tell userspace when 4 or 5 fingers are touching. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: add BTN_TOOL_QUINTTAP for reporting 5 fingers on touchpadDaniel Kurtz
"4-finger scroll" is a gesture supported by some applications and operating systems. "Resting thumb" is when a clickpad user rests a finger (e.g., a thumb), in a "click zone" (typically the bottom of the touchpad) in anticipation of click+move=select gestures. Thus, "4-finger scroll + resting thumb" is a 5-finger gesture. To allow userspace to detect this gesture, we send BTN_TOOL_QUINTTAP. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - process finger (<=3) transitionsDaniel Kurtz
Synaptics image sensor touchpads track 5 fingers, but only report 2. This patch attempts to deal with some idiosyncrasies of these touchpads: * When there are 3 or more fingers, only two are reported. * The touchpad tracks the 5 fingers in slot[0] through slot[4]. * It always reports the lowest and highest valid slots in SGM and AGM packets, respectively. * The number of fingers is only reported in the SGM packet. However, the number of fingers can change either before or after an AGM packet. * Thus, if an SGM reports a different number of fingers than the last SGM, it is impossible to tell whether the intervening AGM corresponds to the old number of fingers or the new number of fingers. * For example, when going from 2->3 fingers, it is not possible to tell whether tell AGM contains slot[1] (old 2nd finger) or slot[2] (new 3rd finger). * When fingers are added one at at time, from 1->2->3, it is possible to track which slots are contained in the SGM and AGM packets: 1 finger: SGM = slot[0], no AGM 2 fingers: SGM = slot[0], AGM = slot[1] 3 fingers: SGM = slot[0], AGM = slot[2] * It is also possible to track which slot is contained in the SGM when 1 of 2 fingers is removed. This is because the touchpad sends a special (0,0,0) AGM packet whenever all fingers are removed except slot[0]: Last AGM == (0,0,0): SGM contains slot[1] Else: SGM contains slot[0] * However, once there are 3 fingers, if exactly 1 finger is removed, it is impossible to tell which 2 slots are contained in SGM and AGM. The (SGM,AGM) could be (0,1), (0,2), or (1,2). There is no way to know. * Similarly, if two fingers are simultaneously removed (3->1), then it is only possible to know if SGM still contains slot[0]. * Since it is not possible to reliably track which slot is being reported, we invalidate the tracking_id every time the number of fingers changes until this ambiguity is resolved when: a) All fingers are removed. b) 4 or 5 fingers are touched, generates an AGM-CONTACT packet. c) All fingers are removed except slot[0]. In this special case, the ambiguity is resolved since by the (0,0,0) AGM packet. Behavior of the driver: When 2 or more fingers are present on the touchpad, the kernel reports up to two MT-B slots containing the position data for two of the fingers reported by the touchpad. If the identity of a finger cannot be tracked when the number-of-fingers changes, the corresponding MT-B slot will be invalidated (track_id set to -1), and a new track_id will be assigned in a subsequent input event report. The driver always reports the total number of fingers using one of the EV_KEY/BTN_TOOL_*TAP events. This could differ from the number of valid MT-B slots for two reasons: a) There are more than 2 fingers on the pad. b) During ambiguous number-of-fingers transitions, the correct track_id for one or both of the slots cannot be determined, so the slots are invalidated. Thus, this is a hybrid singletouch/MT-B scheme. Userspace can detect this behavior by noting that the driver supports more EV_KEY/BTN_TOOL_*TAP events than its maximum EV_ABS/ABS_MT_SLOT. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - decode AGM packet typesDaniel Kurtz
A Synaptics image sensor tracks 5 fingers, but can only report 2. The algorithm for choosing which 2 fingers to report and in which packet: Touchpad maintains 5 slots, numbered 0 to 4 Initially all slots are empty As new fingers are detected, assign them to the lowest available slots The touchpad always reports: SGM: lowest numbered non-empty slot AGM: highest numbered non-empty slot, if there is one In addition, these touchpads have a special AGM packet type which reports the number of fingers currently being tracked, and which finger is in each of the two slots. Unfortunately, these "TYPE=2" packets are only used when more than 3 fingers are being tracked. When less than 4 fingers are present, the 'w' value must be used to track how many fingers are present, and knowing which fingers are being reported is much more difficult, if not impossible. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - add image sensor supportDaniel Kurtz
Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - refactor initialization of abs position axesDaniel Kurtz
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - refactor agm packet parsingDaniel Kurtz
When a Synaptics touchpad is in "AGM" mode, and multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data. The SGM packets have w={0,1} and contain full resolution finger data. Refactor the parsing of agm packets to its own function, and rename the synaptics_data.mt field to .agm to indicate that it contains the contents of the last agm packet. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: synaptics - refactor y inversionDaniel Kurtz
Synaptics touchpads report increasing y from bottom to top. This is inverted from normal userspace "top of screen is 0" coordinates. Thus, the kernel driver reports inverted y coordinates to userspace. This patch refactors this inversion. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: wacom_w8001 - simplify w8001_removeDmitry Torokhov
Since touchscreen driver does not handle any events to be sent to the device we can close serio port first and then unregister the input device. Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-23Input: wacom_w8001 - implement open and closeDmitry Torokhov
Implement open() and close() methods for the input device so that we do not start the device unless there are users listening to the events. Acked-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22Input: ad714x - read the interrupt status registers in a rowMichael Hennerich
The interrupt status registers should be read in row to avoid invalid data. Alter "read" method for both bus options to allow reading several registers in a row and make sure we read interrupt status registers properly. Read sequence saves 50% of bus transactions compared to single register reads. So use it also for the result registers, which are also located in a row. Also update copyright notice. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22Input: ad714x - use DMA-safe buffers for spi_write()Dmitry Torokhov
spi_write() requires use of DMA-safe (cacheline aligned) buffers. Also use the same buffers when reading data since to avoid extra locking and potential memory allocation in spi_write_then_read(). Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 23:33:55 +0000